toggle quoted messageShow quoted text
I will try doing this later.
Can you think of why this would have changed all the sudden? I have two installations which are now behaving this way.
I only realized this because the past few days I was noticing there hasn’t been much chatter on the TG. Also, when I keyed my radio, I would get the “Pacific” annunciation which was an indication that the talkgroup had changed. That’s when I started doing some digging.
On Oct 23, 2020, at 7:49 AM, Steve N4IRS <szingman@...
You might just get away with replacing the binary.
systemctl stop p25gateway
mv P25Gateway P25Gateway.old
mv P25Gateway.armhf P25Gateway
chmod +x P25Gateway
systemctl start p25gateway
To go "all the way" you will want to replace the binary, the ini and
the audio directory from this:
On 10/23/2020 10:41 AM, Greg WB6ZSU
Here are my results (you can see this is a pretty
root@raspberrypi:/home/pi# uname -a
Linux raspberrypi 4.14.98-v7+ #1200 SMP Tue
Feb 12 20:27:48 GMT 2019 armv7l GNU/Linux
P25Gateway version 20180409
On Oct 23, 2020, at 2:47 AM, Steve N4IRS
Please run the following as root:
On 10/23/20 3:17 AM, Greg WB6ZSU wrote:
Over the past few
days I’ve noticed a change in the way the Inactivity
timeout works. I have my system configured with a
Startup TG of 10400 and an Inactivity Timer of 10
minutes. The way I’m accustomed to this working is
that if I changed talk groups to something other
than 10400 (Startup) and there was inactivity on
this new TG for more than 10 minutes, the system
would revert back to 10400. This is not the way it
is behaving today. I’m not exactly sure what TG is
now used as the “Revert” TG.
I’ve looked at the P25Gateway log file and verified
that even when operating on 10400, if there is more
than 10 minutes of inactivity, I will be unlinked
Is this a known current behavior, and if so, what
does happen after the inactivity timer expires?
Thanks and 73,