When the new image is released and you have access to the site, then
yes I suggest you install the new image. If nothing else it will
allow safer updates.
toggle quoted messageShow quoted text
On 10/23/2020 1:47 PM, Greg WB6ZSU
I tried restarting both Pi’s and this seems to have
corrected the issue.
Do you think it is still a good idea to update the
files to the latest version, or is there really no big
advantage? One of the installs is on a mountaintop, and I’m a
little hesitant to do a remote upgrade. I’m using this strictly
for P25, utilizing Quantar Bridge.
On Oct 23, 2020, at 7:59 AM, Steve N4IRS <szingman@...
I see no reason it would change. It's just
that I tested with the current version as shown in the
included logs so I know it's working. As far as I know
it always worked that way.
On 10/23/2020 10:58 AM,
Greg WB6ZSU wrote:
I will try doing this later.
Can you think of why this would have
changed all the sudden? I have two installations
which are now behaving this way.
I only realized this because the past
few days I was noticing there hasn’t been much
chatter on the TG. Also, when I keyed my radio, I
would get the “Pacific” annunciation which was an
indication that the talkgroup had changed. That’s
when I started doing some digging.
On Oct 23, 2020, at 7:49 AM, Steve
You might just get away with replacing the
systemctl stop p25gateway
mv P25Gateway P25Gateway.old
mv P25Gateway.armhf P25Gateway
chmod +x P25Gateway
systemctl start p25gateway
To go "all the way" you will want to replace
the binary, the ini and the audio directory
from this: <https://github.com/DVSwitch/P25Gateway/archive/master.zip>
10:41 AM, Greg WB6ZSU wrote:
Here are my results (you can
see this is a pretty old install):
raspberrypi 4.14.98-v7+ #1200 SMP
Tue Feb 12 20:27:48 GMT 2019
On Oct 23, 2020, at
2:47 AM, Steve N4IRS <szingman@...
Please run the following as
On 10/23/20 3:17 AM, Greg
Over the past few
days I’ve noticed a change
in the way the Inactivity
timeout works. I have my
system configured with a
Startup TG of 10400 and an
Inactivity Timer of 10
minutes. The way I’m
accustomed to this working
is that if I changed talk
groups to something other
than 10400 (Startup) and
there was inactivity on this
new TG for more than 10
minutes, the system would
revert back to 10400. This
is not the way it is
behaving today. I’m not
exactly sure what TG is now
used as the “Revert” TG.
I’ve looked at the
P25Gateway log file and
verified that even when
operating on 10400, if there
is more than 10 minutes of
inactivity, I will be
unlinked from 10400.
Is this a known current
behavior, and if so, what
does happen after the
inactivity timer expires?
Thanks and 73,