Re: 2 ysf2ysf mmdvm_bridge issue with dmr2ysf


Steve N4IRS
 

To troubleshoot this, you will need to run MB in the foreground. You will capture the live data when the crash happens.

Steve N4IRS

On 10/27/20 10:19 PM, Sylvain ve2tbu wrote:
hi All. im running 2 mbridge to link 2 different ysf reflector.working with fusion working good dn and vw without issue, i try with my dmr with openspot.. openspot dmr to ysf. it working only in 1 side. the mb1 working in my own refl is ok but accross the mb1 to mb2 the  mb2 crash and restart.I try many thing  tg change for tg 9 dmr id nothing change. i seen in my log the error message and i can see from mb1 dmr id 3022260 mb2 show 302226 so they miss something.
hers the log issue and i try to connect from dmr2ysf from ysfref1 mb2 crash i connect to ysfref2 mb1 crash so its the same issue on both side .

This software is for use on amateur radio networks only,
I: 2020-10-28 01:56:47.010 it is to be used for educational purposes only. Its use on
I: 2020-10-28 01:56:47.010 commercial networks is strictly prohibited.
I: 2020-10-28 01:56:47.010 Copyright(C) 2015-2018 by Jonathan Naylor, G4KLX and others
M: 2020-10-28 01:56:47.010 MMDVM_Bridge-20200727_V1.5.9 is starting
M: 2020-10-28 01:56:47.010 Built 16:22:31 Oct 23 2020 (GitID #0ea07ac)
I: 2020-10-28 01:56:47.010 General Parameters
I: 2020-10-28 01:56:47.010     Callsign: VA2TB
I: 2020-10-28 01:56:47.010     Id: 302252
I: 2020-10-28 01:56:47.010     Duplex: no
I: 2020-10-28 01:56:47.010     Timeout: 180s
I: 2020-10-28 01:56:47.010     D-Star: disabled
I: 2020-10-28 01:56:47.010     DMR: disabled
I: 2020-10-28 01:56:47.010     YSF: enabled
I: 2020-10-28 01:56:47.010     P25: disabled
I: 2020-10-28 01:56:47.010     NXDN: disabled
I: 2020-10-28 01:56:47.010 Modem Parameters
I: 2020-10-28 01:56:47.010     Port: /dev/null
I: 2020-10-28 01:56:47.010     RX Invert: no
I: 2020-10-28 01:56:47.010     TX Invert: no
I: 2020-10-28 01:56:47.010     PTT Invert: no
I: 2020-10-28 01:56:47.010     TX Delay: 100ms
I: 2020-10-28 01:56:47.010     RX Offset: 0Hz
I: 2020-10-28 01:56:47.010     TX Offset: 0Hz
I: 2020-10-28 01:56:47.010     RX DC Offset: 0
I: 2020-10-28 01:56:47.010     TX DC Offset: 0
I: 2020-10-28 01:56:47.010     RF Level: 100.0%
I: 2020-10-28 01:56:47.010     DMR Delay: 0 (0.0ms)
I: 2020-10-28 01:56:47.010     RX Level: 50.0%
I: 2020-10-28 01:56:47.010     CW Id TX Level: 50.0%
I: 2020-10-28 01:56:47.010     D-Star TX Level: 50.0%
I: 2020-10-28 01:56:47.010     DMR TX Level: 50.0%
I: 2020-10-28 01:56:47.010     YSF TX Level: 50.0%
I: 2020-10-28 01:56:47.010     P25 TX Level: 50.0%
I: 2020-10-28 01:56:47.010     NXDN TX Level: 50.0%
I: 2020-10-28 01:56:47.010     RX Frequency: 0Hz (0Hz)
I: 2020-10-28 01:56:47.010     TX Frequency: 0Hz (0Hz)
M: 2020-10-28 01:56:47.010 Opening the MMDVM
I: 2020-10-28 01:56:47.010 Display Parameters
I: 2020-10-28 01:56:47.010     Type:
I: 2020-10-28 01:56:47.010 System Fusion Network Parameters
I: 2020-10-28 01:56:47.010     Local Address: 0
I: 2020-10-28 01:56:47.010     Local Port: 42200
I: 2020-10-28 01:56:47.010     Gateway Address: 151.80.143.185
I: 2020-10-28 01:56:47.010     Gateway Port: 42002
I: 2020-10-28 01:56:47.010     Mode Hang: 3s
M: 2020-10-28 01:56:47.010 Opening YSF network connection
I: 2020-10-28 01:56:47.014 RSSI
I: 2020-10-28 01:56:47.014     Mapping File: /dev/null
I: 2020-10-28 01:56:47.014 Loaded 0 RSSI data mapping points from /dev/null
I: 2020-10-28 01:56:47.014 DMR Id Lookups
I: 2020-10-28 01:56:47.014     File: /opt/DMRIds.dat
I: 2020-10-28 01:56:47.014     Reload: 24 hours
I: 2020-10-28 01:56:47.142 Loaded 89800 Ids to the DMR callsign lookup table
I: 2020-10-28 01:56:47.145 YSF RF Parameters
I: 2020-10-28 01:56:47.145     Low Deviation: no
I: 2020-10-28 01:56:47.145     Remote Gateway: no
I: 2020-10-28 01:56:47.145     Self Only: no
I: 2020-10-28 01:56:47.145     DSQ: no
I: 2020-10-28 01:56:47.145     Mode Hang: 10s
M: 2020-10-28 01:56:47.145 YSF, Opening INI file: DVSwitch.ini
M: 2020-10-28 01:56:47.145 YSF, Setting [YSF] address -> 127.0.0.1
M: 2020-10-28 01:56:47.145 YSF, Setting [YSF] txPort -> 42500
M: 2020-10-28 01:56:47.145 YSF, Setting [YSF] rxPort -> 43500
M: 2020-10-28 01:56:47.145 YSF, Setting [YSF] txWidePort -> 42500
M: 2020-10-28 01:56:47.145 YSF, Setting [YSF] fallbackID -> 1234567
M: 2020-10-28 01:56:47.145 YSF, Setting [YSF] exportTG -> 9
M: 2020-10-28 01:56:47.145 YSF, Setting [YSF] slot -> 2
M: 2020-10-28 01:56:47.145 YSF, Setting [YSF] RemotePort -> 6073
M: 2020-10-28 01:56:47.145 YSF, Transmitting on 127.0.0.1:42500, and listening on port 43500.  Result = 1
M: 2020-10-28 01:56:47.145 MMDVM_Bridge-20200727_V1.5.9 is running
I: 2020-10-28 01:56:47.145 Started the DMR Id lookup reload thread
M: 2020-10-28 01:56:58.969 YSF, TX state = ON
I: 2020-10-28 01:56:58.969 YSF, Begin TX: src=1234567 rpt=0 dst=9 slot=2 cc=0 metadata=302226
M: 2020-10-28 01:56:58.969 YSF, No call or id found, using ini value: VA2TB     HH&
I: 2020-10-28 01:56:59.326 YSF, Narrow transmit (72 bit)
I: 2020-10-28 01:57:02.865 MMDVM_Bridge:
I: 2020-10-28 01:57:02.865 Portions Copyright (C) 2018, 2019, 2020 DVSwitch, INAD.
I: 2020-10-28 01:57:02.865 Hacks by Mike N4IRR and Steve N4IRS
I: 2020-10-28 01:57:02.865 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

Join main@DVSwitch.groups.io to automatically receive all group messages.