Re: Adding P25 to existing YSF and DMR bridge


Steve N4IRS
 

Gary,
Below is the [AMBE_AUDIO] stanza of you 2 AB instances. Notice you have the txTG set to 9. This tells AB to send traffic it receives on the the USRP port (from the other AB) to TG9
Set your txtg to 27715 and retest.



DMR AB.ini

[AMBE_AUDIO]
address = 127.0.0.1                     ; IP address of xx_Bridge
txPort = 31113                          ; Transmit TLV frames to partner on this port
rxPort = 31110                          ; Listen for TLV frames from partner on this port
ambeMode = DMR                          ; DMR, DMR_IPSC, DSTAR, NXDN, P25, YSFN, YSFW (encode PCM to this format)
minTxTimeMS = 2500                      ; Analog -> Digital Minimum time in MS for hang delay (0-10000)

; The metadata below is used when ASL is the source since it does not have any concept of digital modes
gatewayDmrId = 1139360                ; ID to use when transmitting from Analog_Bridge 7 digit ID
repeaterID = 113936022                  ; ID of source repeater 7 digit ID plus 2 digit SSID
txTg = 9                                ; TG to use for all frames sent from Analog_Bridge -> xx_Bridge
txTs = 2                                ; Slot to use for frames sent from Analog_Bridge -> xx_Bridge
colorCode = 1                           ; Color Code to assign DMR frames


P25 AB.ini

[AMBE_AUDIO]
address = 127.0.0.1                     ; IP address of xx_Bridge
txPort = 34103                          ; Transmit TLV frames to partner on this port
rxPort = 34100                          ; Listen for TLV frames from partner on this port
ambeMode = P25                        ; DMR, DMR_IPSC, DSTAR, NXDN, P25, YSFN, YSFW (encode PCM to this format)
minTxTimeMS = 2500                      ; Analog -> Digital Minimum time in MS for hang delay (0-10000)

; The metadata below is used when ASL is the source since it does not have any concept of digital modes
gatewayDmrId = 1139360                 ; ID to use when transmitting from Analog_Bridge 7 digit ID
repeaterID = 113936033                  ; ID of source repeater 7 digit ID plus 2 digit SSID
txTg = 9                                ; TG to use for all frames sent from Analog_Bridge -> xx_Bridge
txTs = 2                                ; Slot to use for frames sent from Analog_Bridge -> xx_Bridge
colorCode = 1                           ; Color Code to assign DMR frames




On 12/12/20 10:11 AM, Gary, KE8O wrote:
TG 27715. I’m trying to set things up so 27715 is the YSF, DMR, and P25 reflector/TG number. 

Join main@DVSwitch.groups.io to automatically receive all group messages.