Re: One Way Traffic ASL to YSF


Steve N4IRS
 

Analog_Bridge:

[USRP]
address = 127.0.0.1                     ; IP address of USRP partner (Allstar/Asterisk or another Analog_Bridge)
txPort = 32001                          ; Transmit USRP frames on this port
rxPort = 34001                          ; Listen for USRP frames on this port
usrpAudio = AUDIO_UNITY                 ; Digital -> Analog (AUDIO_UNITY, AUDIO_USE_GAIN, AUDIO_USE_AGC)
usrpGain = 1.10                         ; Gain factor when usrpAudio = AUDIO_USE_GAIN (0.0 to 5.0) (1.0 = AUDIO_UNITY)
usrpAGC = -20,10,100                    ; Set the agc threshold (db), slope (db) and decay (ms)
tlvAudio = AUDIO_UNITY                  ; Analog -> Digital (AUDIO_UNITY, AUDIO_USE_GAIN, AUDIO_BPF)
tlvGain = 0.35                          ; Gain factor when tlvAudio = AUDIO_USE_GAIN (0.0 to 5.0) (1.0 = AUDIO_UNITY)


AllStar

rxchannel = USRP/127.0.0.1:34001:32001  ; Use the USRP channel driver. Must be enabled in modules.conf
                    ; 127.0.0.1 = IP of the target application
                    ; 34001 = UDP port the target application is listening on
                    ; 32001 = UDP port ASL is listening on


On 12/31/20 11:39 PM, Jay wrote:
Also, the DVSwitch Server is hosted in the Cloud, so am I confused on where the DVSwitch Server IP needs to go?

Hanging it up for the evening.  Start again in the morn.



--

jb   N4NQY

Join main@DVSwitch.groups.io to automatically receive all group messages.