OK,
Not that this matters for your issue. Since you are using the stick:
[DV3000]
; address = 127.0.0.1
; rxPort = 2460  
address = /dev/ttyUSB0    
baud = 460800      
serial = true

set your DV3000 section like above.

For your red button RX monitor, take a look at /var/log/dvswitch/proxy.log

On 1/2/21 7:02 AM, N4UPC - Scott via groups.io wrote:

The only thing that is not standard is that I'm using a DVMEGA stick.  Here is the section that pertains to:

[DV3000]

address = 127.0.0.1 

rxPort = 2460   

address = /dev/ttyUSB0     

baud = 460800       

serial = true

73,

Scott

N4UPC

‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 5:52 AM, Steve N4IRS <szingman@...> wrote:

green to red not good. Red bad.

On 1/2/21 6:51 AM, N4UPC - Scott via groups.io wrote:

I saw you transmitting that time, but no audio.

73,

Scott

N4UPC

‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 5:32 AM, Steve N4IRS <szingman@...> wrote:

standby

On 1/2/21 6:28 AM, N4UPC - Scott via groups.io wrote:

I can see you on the dashboard.  The RX light keeps going from green to red. I'm not hearing anything.

73,

Scott

N4UPC

‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 5:22 AM, Steve N4IRS <szingman@...> wrote:

I'm calling you.

On 1/2/21 6:15 AM, N4UPC - Scott via groups.io wrote:

Yes, I'm using my DMR ID as a talkgroup.

73,

Scott

N4UPC

‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 4:59 AM, Steve N4IRS <szingman@...> wrote:

TG 3162356?

On 1/2/21 5:26 AM, N4UPC - Scott via groups.io wrote:

You were correct Steve. Can some see if they can connect to me (3162356). Thanks!