I am using the DVSwitch-Server with the repo. Yes Hardware transcoder. The op transcoder sounds and acts better.

Thanks,

Ryan (KB8PMY)

KD8TUZ Hamilton Wireless Radio Club

On Sun, Jan 17, 2021 at 11:01 PM Steve N4IRS <szingman@...> wrote:

How did you install DVSwitch? Are you using a hardware vocoder?

Steve N4IRS

On 1/17/21 10:53 PM, Ryan Collier wrote:

I have been beating my head against the table all weekend over this DSTAR DVSwitch project. The audio coming from DSTAR to ASL is jittery. It is like it is trying to transcode to fast to to many times. Also I can not get DVSwitch to get it in to DSTAR more. When it transmits it looks like this. I: 2021-01-18 03:35:17.678 Begin TX: src=3139164 rpt=113969899 dst=9 slot=1 cc=0 call=KB8PMY To me that looks like DMR.  I have only got it to enter DSTAR mode once. it should look like this:
0000:  24 24 43 52 43 30 33 38 42 2C 4B 42 38 50 4D 59    *$$CRC038B,KB8PMY*
M: 2021-01-18 03:46:21: 0010:  2D 50 3E 41 50 49 35 31 2C 44 53 54 41 52 2A 3A    *-P>API51,DSTAR*:*
M: 2021-01-18 03:46:21: 0020:  2F 30 33 34 36 31 39 68 33 39 32 32 2E 38 35 4E    */034619h3922.85N*
M: 2021-01-18 03:46:21: 0030:  2F 30 38 34 33 32 2E 36 30 57 5B 31 33 32 2F 30    */08432.60W[132/0*
M: 2021-01-18 03:46:21: 0040:  30 31 2F 41 3D 30 30 30 36 36 30 0D                *01/A=000660.*

What all files do you need? Also tried to enable DMR and YSF to get it out of DMR mode and that didn't work. I also have an issue connecting to remote ircddbgateway. Gateway address is my ircddbgateway computer. but the gateway address should be 20028 and local should be 20010. But to get it to work. I had to do gatewayport 20010 and local pot 20028 I am so confused.

All I want to do is get DSTAR linked back to ASL. dummyrepeater doesn't work anymore. I would get good audio through. But when DSTAR went back there was nothing.  No audio or keyup. Then I want to get DMR local 2 on my ASL node. Or is there a better way? Should I get my xlxd reflector working internally and then transcode from there?

Ryan