I'm out of time tonight. If you are saying the built in vocoder
works better then the hardware vocoder, something is wrong. Also,
you should not have to change port numbers.
To change modes:
/opt/MMDVM_Bridge/dvswitch mode DMR
/opt/MMDVM_Bridge/dvswitch mode DSTAR
On 1/17/21 11:16 PM, Ryan Collier
I am using the DVSwitch-Server with the repo. Yes Hardware
transcoder. The op transcoder sounds and acts better.
KD8TUZ Hamilton Wireless Radio Club
On Sun, Jan 17, 2021 at 11:01
PM Steve N4IRS <szingman@...
How did you install DVSwitch? Are you using a hardware
On 1/17/21 10:53 PM, Ryan Collier wrote:
I have been beating my head against
the table all weekend over this DSTAR DVSwitch project.
The audio coming from DSTAR to ASL is jittery. It is like
it is trying to transcode to fast to to many times. Also I
can not get DVSwitch to get it in to DSTAR more. When it
transmits it looks like this. I: 2021-01-18 03:35:17.678
Begin TX: src=3139164 rpt=113969899 dst=9 slot=1 cc=0
call=KB8PMY To me that looks like DMR. I have only got it
to enter DSTAR mode once. it should look like this:
0000: 24 24 43 52 43 30 33 38 42 2C 4B 42 38 50 4D 59
M: 2021-01-18 03:46:21: 0010: 2D 50 3E 41 50 49 35 31 2C
44 53 54 41 52 2A 3A *-P>API51,DSTAR*:*
M: 2021-01-18 03:46:21: 0020: 2F 30 33 34 36 31 39 68 33
39 32 32 2E 38 35 4E */034619h3922.85N*
M: 2021-01-18 03:46:21: 0030: 2F 30 38 34 33 32 2E 36 30
57 5B 31 33 32 2F 30 */08432.60W[132/0*
M: 2021-01-18 03:46:21: 0040: 30 31 2F 41 3D 30 30 30 36
36 30 0D *01/A=000660.*
What all files do you need? Also tried to enable DMR and
YSF to get it out of DMR mode and that didn't work. I also
have an issue connecting to remote ircddbgateway. Gateway
address is my ircddbgateway computer. but the gateway
address should be 20028 and local should be 20010. But to
get it to work. I had to do gatewayport 20010 and local
pot 20028 I am so confused.
All I want to do is get DSTAR linked back to ASL.
dummyrepeater doesn't work anymore. I would get good audio
through. But when DSTAR went back there was nothing. No
audio or keyup. Then I want to get DMR local 2 on my ASL
node. Or is there a better way? Should I get my xlxd
reflector working internally and then transcode from