toggle quoted messageShow quoted text
Ok. When I get home tonight. I will uninstall everything and reinstall from a purge. Then I will follow up.
On Mon, Jan 18, 2021, 10:45 AM Steve N4IRS <szingman@...
No it is not trying to transcode from D-Star. I'm betting you have
UDP port problems. The DVSwitch install is pre-configured to just
drop in. When you run DVS it gives you the option to set the UDP
ports on Analog _Bridge. Just leave them at default.
If you can put all the ports back to default. Look at the logs for
info as to where you are having a failure.
On 1/18/2021 9:13 AM, Ryan Collier
So I ran that command last night. It made it
worse. I now have no audio from DSTAR at all. It keys but no
audio. I did turn all software transcoding off.
My question is. Why when I am in DSTAR mode does
it have to pull my DMR information? Are we sure that it is not
somehow trying to transcode from DMR?
On Sun, Jan 17, 2021, 11:39 PM
Steve N4IRS <szingman@...
I'm out of time tonight. If you are saying the built in
vocoder works better then the hardware vocoder, something is
wrong. Also, you should not have to change port numbers.
To change modes:
/opt/MMDVM_Bridge/dvswitch mode DMR
/opt/MMDVM_Bridge/dvswitch mode DSTAR
On 1/17/21 11:16 PM, Ryan Collier wrote:
I am using the DVSwitch-Server with the repo. Yes
Hardware transcoder. The op transcoder sounds and acts
KD8TUZ Hamilton Wireless Radio Club
On Sun, Jan 17, 2021
at 11:01 PM Steve N4IRS <szingman@...
How did you install DVSwitch? Are you using a
On 1/17/21 10:53 PM, Ryan Collier wrote:
I have been beating my head
against the table all weekend over this DSTAR
DVSwitch project. The audio coming from DSTAR to
ASL is jittery. It is like it is trying to
transcode to fast to to many times. Also I can not
get DVSwitch to get it in to DSTAR more. When it
transmits it looks like this. I: 2021-01-18
03:35:17.678 Begin TX: src=3139164 rpt=113969899
dst=9 slot=1 cc=0 call=KB8PMY To me that looks
like DMR. I have only got it to enter DSTAR mode
once. it should look like this:
0000: 24 24 43 52 43 30 33 38 42 2C 4B 42 38 50
4D 59 *$$CRC038B,KB8PMY*
M: 2021-01-18 03:46:21: 0010: 2D 50 3E 41 50 49
35 31 2C 44 53 54 41 52 2A 3A
M: 2021-01-18 03:46:21: 0020: 2F 30 33 34 36 31
39 68 33 39 32 32 2E 38 35 4E
M: 2021-01-18 03:46:21: 0030: 2F 30 38 34 33 32
2E 36 30 57 5B 31 33 32 2F 30
M: 2021-01-18 03:46:21: 0040: 30 31 2F 41 3D 30
30 30 36 36 30 0D *01/A=000660.*
What all files do you need? Also tried to enable
DMR and YSF to get it out of DMR mode and that
didn't work. I also have an issue connecting to
remote ircddbgateway. Gateway address is my
ircddbgateway computer. but the gateway address
should be 20028 and local should be 20010. But to
get it to work. I had to do gatewayport 20010 and
local pot 20028 I am so confused.
All I want to do is get DSTAR linked back to ASL.
dummyrepeater doesn't work anymore. I would get
good audio through. But when DSTAR went back there
was nothing. No audio or keyup. Then I want to
get DMR local 2 on my ASL node. Or is there a
better way? Should I get my xlxd reflector working
internally and then transcode from there?