Re: ASL < - > DSTAR

Ryan Collier

Ok. When I get home tonight. I will uninstall everything and reinstall from a purge. Then I will follow up.

On Mon, Jan 18, 2021, 10:45 AM Steve N4IRS <szingman@...> wrote:
No it is not trying to transcode from D-Star. I'm betting you have UDP port problems. The DVSwitch install is pre-configured  to just drop in. When you run DVS it gives you the option to set the UDP ports on Analog _Bridge. Just leave them at default.
If you can put all the ports back to default. Look at the logs for info as to where you are having a failure.

Steve N4IRS

On 1/18/2021 9:13 AM, Ryan Collier wrote:
So I ran that command last night. It made it worse. I now have no audio from DSTAR at all. It keys but no audio. I did turn all software transcoding off. 

My question is. Why when I am in DSTAR mode does it have to pull my DMR information? Are we sure that it is not somehow trying to transcode from DMR?

On Sun, Jan 17, 2021, 11:39 PM Steve N4IRS <szingman@...> wrote:
I'm out of time tonight. If you are saying the built in vocoder works better then the hardware vocoder, something is wrong. Also, you should not have to change port numbers.
To change modes:
/opt/MMDVM_Bridge/dvswitch mode DMR
/opt/MMDVM_Bridge/dvswitch mode DSTAR

Steve N4IRS

On 1/17/21 11:16 PM, Ryan Collier wrote:
I am using the DVSwitch-Server with the repo. Yes Hardware transcoder. The op transcoder sounds and acts better.


Ryan (KB8PMY)
KD8TUZ Hamilton Wireless Radio Club

On Sun, Jan 17, 2021 at 11:01 PM Steve N4IRS <szingman@...> wrote:
How did you install DVSwitch? Are you using a hardware vocoder?

Steve N4IRS

On 1/17/21 10:53 PM, Ryan Collier wrote:
I have been beating my head against the table all weekend over this DSTAR DVSwitch project. The audio coming from DSTAR to ASL is jittery. It is like it is trying to transcode to fast to to many times. Also I can not get DVSwitch to get it in to DSTAR more. When it transmits it looks like this. I: 2021-01-18 03:35:17.678 Begin TX: src=3139164 rpt=113969899 dst=9 slot=1 cc=0 call=KB8PMY To me that looks like DMR.  I have only got it to enter DSTAR mode once. it should look like this:
0000:  24 24 43 52 43 30 33 38 42 2C 4B 42 38 50 4D 59    *$$CRC038B,KB8PMY*
M: 2021-01-18 03:46:21: 0010:  2D 50 3E 41 50 49 35 31 2C 44 53 54 41 52 2A 3A    *-P>API51,DSTAR*:*
M: 2021-01-18 03:46:21: 0020:  2F 30 33 34 36 31 39 68 33 39 32 32 2E 38 35 4E    */034619h3922.85N*
M: 2021-01-18 03:46:21: 0030:  2F 30 38 34 33 32 2E 36 30 57 5B 31 33 32 2F 30    */08432.60W[132/0*
M: 2021-01-18 03:46:21: 0040:  30 31 2F 41 3D 30 30 30 36 36 30 0D                *01/A=000660.*

What all files do you need? Also tried to enable DMR and YSF to get it out of DMR mode and that didn't work. I also have an issue connecting to remote ircddbgateway. Gateway address is my ircddbgateway computer. but the gateway address should be 20028 and local should be 20010. But to get it to work. I had to do gatewayport 20010 and local pot 20028 I am so confused.

All I want to do is get DSTAR linked back to ASL. dummyrepeater doesn't work anymore. I would get good audio through. But when DSTAR went back there was nothing.  No audio or keyup. Then I want to get DMR local 2 on my ASL node. Or is there a better way? Should I get my xlxd reflector working internally and then transcode from there?


Join to automatically receive all group messages.