toggle quoted messageShow quoted text
I'm wanting to DMR , C4FM and NXDN to transcode to Ambe at the XLX server if thats possibl;e, The XLX and DVSwitch will be at the same VPS , but the vocoder will be at my physical location with the vocoder,
If possible I want to map the two, If thats possible with DVSwitch.
I'm relatively new with Ambe and know more than I ever imagined I would want to know about. We have several Dstar users in the area that would like to blow the dust off of their radios, We built an MMDVM linked repeater system that covers the same area as our Analog network..That's how we have been using DVSwitch for the last 4 years, We want to now use the vocoders to convert the NXDN, DMR and C4FM to the Ambe XLX . and wanting to use DVSwitch, if possible to do all of the heavy lifting between servers.
DVSwitch has already been configured and working flawlessly for 4 years..Now were wanting to transcode Dstar into the mix...Sorry for any confusion...I am interested in analog..But not untill I get past the ambe vocoding curve.
On Thu, Feb 4, 2021 at 1:28 PM Steve N4IRS <szingman@...
I'm not sure I understand what you are trying to do? Maybe what is
the end result?
On 2/4/2021 1:26 PM, N9UMJ wrote:
I have a DV3003 and want only to use it Ambe to DMR or Ambe
to YSF, Does it still build in Analog Bridge?
Analog to digital will come later , I see where ASL is used
but would prefer not to use it if possible.
Is there a working Ambe to digital config file I could look
at to see what and how it should look? Just trying to wrap my
head around it...I'm better with hardware than software but
with a a visual and a poke with a sharp stick, I can typically
work my way through it
Thanks you for your patience and help.
On Thu, Feb 4, 2021 at 12:54
PM Steve N4IRS <szingman@...
Analog_Bridge is the only DVSwitch component that uses a
On 2/4/2021 12:51 PM, N9UMJ wrote:
Thanks Steve , I'll look there and see if it's
OHH?? Analog_Bridge for ambe? interesting?
On Thu, Feb 4, 2021 at
12:25 PM Steve N4IRS <szingman@...
The dashboard is installed in /var/www/html The
web server is lighttpd. Is the process running?
You can address the location of AMBE Server in
On 2/4/2021 11:56 AM, N9UMJ wrote:
Very nice...Smooth build ! I have my XLX
reflector on this VPS as well but my
transcoder is at another IP address..How would
this map through to the transcoder to
Didnt find the dashboard? May have
after the build I'll direct my BM TG to the
XLX , The ambe is all that see's the
Just not sure how DVSwitch should map for
transcoder ...If it does at all?? .127.0001
will map to the XLX to DVSwitch.
I've not done this yet. The XLX has only
been used for Dstar up to now.
On Thu, Feb 4,
2021 at 10:45 AM Steve N4IRS <szingman@...
Make sure you install is up to date
if updates were installed, reboot
Add the dvswitch repository
chmod +x buster
Make sure you have added the repository
look for "deb http://dvswitch.org/DVSwitch_Repository
hamradio" in the output
Verify programs are now installable
apt install dvswitch-server --dry-run
any errors reported?
Install DVSwitch Server
apt install dvswitch-server
errors? stop and ask
run the dvs menu to configure DVSwitch
Configure DVSwitch Server to taste.
On 2/4/2021 10:42 AM, N9UMJ wrote:
What is the recommended download
and install method? I thought I saw
where there was a DV Switch installer
I have some idle time and would
like to condense everything to on vps.
Thu, Feb 4, 2021 at 10:36 AM Steve
The base install is
pre-configured for a Mobile user.
That does not stop you from
re-configuring as you see fit. All
the components are installed.
I hope that answers your question.
On 2/4/2021 10:32 AM, N9UMJ
an older version of DV Switch on a
vps, I would like to install it on
a different VPS, I'm running
Ubuntu on the old VPS and DV
Switch and Running Debian Stretch
on the New VPS.
If I made a fresh install on the
Debian Stretch VPS what would be
the best install process for this?
I see there are new features and
The current original version I'm
using supports a multi repeater
linked network...I looked at DV
server and it appeared to be just
for use with an individual mobile
Please recommend the best method
of making the change.