1. Messages
  2. ASL - Analog - HB Bridge help please

Re: ASL - Analog - HB Bridge help please

F1TZO - Michel
 

Hi Steve,

Thanks, I did the correction, but always nothing from ASL (Echolink) to DMR.

In fact, when I speak from DMR to ASL, in the Analog_bride logs, I see the TX, but when I speak from ASL to DMr, I didn't see anything.

Here are the analog_bridge log, start, speak from DMR (2 times) and after speak from ASL :

I: 2018-02-14 20:57:47.337 Analog_Bridge - Version 20170719
M: 2018-02-14 20:57:47.337 Setting [GENERAL] logLevel -> 2
M: 2018-02-14 20:57:47.337 Setting [GENERAL] outputAudioDevice -> /dev/null
M: 2018-02-14 20:57:47.337 Setting [GENERAL] inputAudioDevice -> /dev/null
M: 2018-02-14 20:57:47.337 Setting [GENERAL] decoderFallBack -> false
M: 2018-02-14 20:57:47.337 Setting [GENERAL] useMicrophone -> false
M: 2018-02-14 20:57:47.337 Setting [GENERAL] useVox -> True
M: 2018-02-14 20:57:47.338 Setting [GENERAL] voxDecay -> 2
M: 2018-02-14 20:57:47.338 Setting [GENERAL] voxTrigger -> 200
M: 2018-02-14 20:57:47.338 Setting [AMBE_AUDIO] server -> 127.0.0.1
M: 2018-02-14 20:57:47.338 Setting [AMBE_AUDIO] fromDMRPort -> 31002
M: 2018-02-14 20:57:47.338 Setting [AMBE_AUDIO] toDMRPort -> 31003
M: 2018-02-14 20:57:47.338 Setting [AMBE_AUDIO] ambeSize -> 72
M: 2018-02-14 20:57:47.338 Setting [AMBE_AUDIO] minTxTimeMS -> 2000
M: 2018-02-14 20:57:47.338 Setting [AMBE_AUDIO] gatewayDmrId -> 2088012
M: 2018-02-14 20:57:47.338 Setting [AMBE_AUDIO] repeaterID -> 12088012
M: 2018-02-14 20:57:47.338 Setting [AMBE_AUDIO] txTg -> 20815
M: 2018-02-14 20:57:47.338 Setting [AMBE_AUDIO] txTs -> 2
M: 2018-02-14 20:57:47.338 Setting [AMBE_AUDIO] colorCode -> 1
M: 2018-02-14 20:57:47.338 Setting [USRP] server -> 192.168.200.83
M: 2018-02-14 20:57:47.338 Setting [USRP] toASLPort -> 32001
M: 2018-02-14 20:57:47.338 Setting [USRP] fromASLPort -> 34001
M: 2018-02-14 20:57:47.338 Setting [USRP] aslAudio -> AUDIO_USE_AGC
M: 2018-02-14 20:57:47.338 Setting [USRP] agcGain -> -20
M: 2018-02-14 20:57:47.338 Setting [USRP] dmrAudio -> AUDIO_UNITY
M: 2018-02-14 20:57:47.338 Setting [USRP] dmrGain -> 0.95
M: 2018-02-14 20:57:47.338 Setting [DV3000] server -> 192.168.200.81
M: 2018-02-14 20:57:47.338 Setting [DV3000] port -> 2461
W: 2018-02-14 20:57:47.338 ioctl reset error
W: 2018-02-14 20:57:47.338 ioctl speed error
W: 2018-02-14 20:57:47.338 ioctl stereo error
W: 2018-02-14 20:57:47.338 ioctl setfmt error
M: 2018-02-14 20:57:47.338 Audio In/Out Device: /dev/null
I: 2018-02-14 20:57:47.339 Open UDP listener on 127.0.0.1:31002
I: 2018-02-14 20:57:47.339 Open USRP on 192.168.200.83:32001
M: 2018-02-14 20:57:47.339 Connecting to DV3000 hardware......
M: 2018-02-14 20:57:47.352 Begin DV3000 decode
I: 2018-02-14 20:57:47.408 Subscriber IDs loaded: 73611
I: 2018-02-14 20:57:47.408 Using hardware AMBE decoder
I: 2018-02-14 20:57:47.408 Starting Analog_Bridge --> USRP thread
I: 2018-02-14 20:57:47.408 Open UDP listener on 192.168.200.83:34001
I: 2018-02-14 20:57:47.408 Starting USRP --> HB_Bridge thread
I: 2018-02-14 20:58:04.521 Begin TX: src=2088006 rpt=2088006 dst=20815 slot=2 cc=1
I: 2018-02-14 20:58:04.712 Connected to USRP 192.168.200.83:32001
I: 2018-02-14 21:01:35.249 Begin TX: src=2088006 rpt=2088006 dst=20815 slot=2 cc=1

Thanks for your help

Regards,

Michel - F1TZO

----

Le 14/02/2018 à 01:16, Steve N4IRS a écrit :
Michel,
In Analog_Bridge.ini you have this in the AMBE_Audio section:
gatewayDmrId = 2088012        ; ID to use when transmitting from Analog_Bridge
repeaterID = 2088012        ; ID of source repeater

gatewayDmrid is the ID that will display on the DMR radio when someone transmits from analog
repeaterID is the DMR ID of the repeater the signal is coming from.
Thay can not be the same. If you have a real DMR repeater ID, use it. Otherwise, add a 1 to your repeaterID so that it is 12088012

73, Steve N4IRS


On 02/13/2018 06:57 PM, F1TZO - Michel wrote:
Hi Steve and all

I write from France, so please, sorry for my English ;-)

So, I try to make working ASL <-> Analog_Bridge <-> HB_Bridge  to link Echolink with DMR.
I installed ASL in a VM and Analog_Brige + HB_Bridge in an other VM.
I have a Raspi with a DV3000U and AMBEserver running
And I have a MMDVM Hotspot connected on the HB_Bridge in DMR

After looking a lot the messages in the group, I made the configurations and the results are :
- MMDVM Hostspot is connected on HB_Bridge : OK
- ASL + HB_Bridge + Analog_bridge are started
- DMR to ASL : OK sound's good
- ASL to DMR : Nothing, no TX, no log in Analog_bridge
I don't see any error in the logs.

So .... I need help ;-) and when it'll work, I have to find how connect this to BM ....

Here are my config files in attach.

Thanks for your works and your help

Regards,

Michel - F1TZO









Join main@DVSwitch.groups.io to automatically receive all group messages.