Re: #mmdvm_bridge Segmentation Fault on Debian 10 amd64 #mmdvm_bridge


Kimberly <kj7omo@...>
 

root@localhost:~# cd /opt/MMDVM_Bridge
root@localhost:/opt/MMDVM_Bridge# ./MMDVM_Bridge MMDVM_Bridge.ini
I: 2021-03-22 11:21:26.014 MMDVM_Bridge:
I: 2021-03-22 11:21:26.014 Portions Copyright (C) 2018, 2019, 2020, 2021 DVSwitch, INAD.
I: 2021-03-22 11:21:26.014 Hacks by Mike N4IRR and Steve N4IRS
I: 2021-03-22 11:21:26.014 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
I: 2021-03-22 11:21:26.014 This software is for use on amateur radio networks only,
I: 2021-03-22 11:21:26.014 it is to be used for educational purposes only. Its use on
I: 2021-03-22 11:21:26.014 commercial networks is strictly prohibited.
I: 2021-03-22 11:21:26.014 Copyright(C) 2015-2018 by Jonathan Naylor, G4KLX and others
M: 2021-03-22 11:21:26.014 MMDVM_Bridge-20210223_V1.6.3 is starting
M: 2021-03-22 11:21:26.014 Built 11:40:14 Mar  1 2021 (GitID #bb741c3)
I: 2021-03-22 11:21:26.014 General Parameters
I: 2021-03-22 11:21:26.014     Callsign: KJ7OMO
I: 2021-03-22 11:21:26.014     Id: 316809400
I: 2021-03-22 11:21:26.014     Duplex: no
I: 2021-03-22 11:21:26.014     Timeout: 180s
I: 2021-03-22 11:21:26.014     D-Star: disabled
I: 2021-03-22 11:21:26.014     DMR: enabled
I: 2021-03-22 11:21:26.014     YSF: disabled
I: 2021-03-22 11:21:26.014     P25: disabled
I: 2021-03-22 11:21:26.014     NXDN: disabled
I: 2021-03-22 11:21:26.014 Modem Parameters
I: 2021-03-22 11:21:26.014     Port: /dev/null
I: 2021-03-22 11:21:26.014     RX Invert: no
I: 2021-03-22 11:21:26.014     TX Invert: no
I: 2021-03-22 11:21:26.014     PTT Invert: no
I: 2021-03-22 11:21:26.014     TX Delay: 100ms
I: 2021-03-22 11:21:26.014     RX Offset: 0Hz
I: 2021-03-22 11:21:26.014     TX Offset: 0Hz
I: 2021-03-22 11:21:26.014     RX DC Offset: 0
I: 2021-03-22 11:21:26.014     TX DC Offset: 0
I: 2021-03-22 11:21:26.014     RF Level: 100.0%
I: 2021-03-22 11:21:26.014     DMR Delay: 0 (0.0ms)
I: 2021-03-22 11:21:26.015     RX Level: 50.0%
I: 2021-03-22 11:21:26.015     CW Id TX Level: 50.0%
I: 2021-03-22 11:21:26.015     D-Star TX Level: 50.0%
I: 2021-03-22 11:21:26.015     DMR TX Level: 50.0%
I: 2021-03-22 11:21:26.015     YSF TX Level: 50.0%
I: 2021-03-22 11:21:26.015     P25 TX Level: 50.0%
I: 2021-03-22 11:21:26.015     NXDN TX Level: 50.0%
I: 2021-03-22 11:21:26.015     RX Frequency: 0Hz (0Hz)
I: 2021-03-22 11:21:26.015     TX Frequency: 0Hz (0Hz)
M: 2021-03-22 11:21:26.015 Opening the MMDVM
I: 2021-03-22 11:21:26.015 Display Parameters
I: 2021-03-22 11:21:26.015     Type:
I: 2021-03-22 11:21:26.015 RSSI
I: 2021-03-22 11:21:26.015     Mapping File: /dev/null
I: 2021-03-22 11:21:26.015 Loaded 0 RSSI data mapping points from /dev/null
I: 2021-03-22 11:21:26.015 DMR Id Lookups
I: 2021-03-22 11:21:26.015     File: /var/lib/mmdvm/DMRIds.dat
I: 2021-03-22 11:21:26.015     Reload: 24 hours
I: 2021-03-22 11:21:26.138 Loaded 191386 Ids to the DMR callsign lookup table
I: 2021-03-22 11:21:26.138 DMR RF Parameters
I: 2021-03-22 11:21:26.138     Id: 316809400
I: 2021-03-22 11:21:26.138     Color Code: 1
I: 2021-03-22 11:21:26.138     Self Only: no
I: 2021-03-22 11:21:26.138     Embedded LC Only: yes
I: 2021-03-22 11:21:26.138     Dump Talker Alias Data: no
I: 2021-03-22 11:21:26.138     Prefixes: 0
I: 2021-03-22 11:21:26.138     Call Hang: 4s
I: 2021-03-22 11:21:26.138     TX Hang: 4s
I: 2021-03-22 11:21:26.138     Mode Hang: 10s
M: 2021-03-22 11:21:26.138 DMR, Opening INI file: DVSwitch.ini
M: 2021-03-22 11:21:26.138 DMR, Setting [DMR] address -> 127.0.0.1
M: 2021-03-22 11:21:26.138 DMR, Setting [DMR] txPort -> 31100
M: 2021-03-22 11:21:26.138 DMR, Setting [DMR] rxPort -> 31103
M: 2021-03-22 11:21:26.138 DMR, Setting [DMR] slot -> 2
M: 2021-03-22 11:21:26.138 DMR, Setting [DMR] exportTG -> 0
M: 2021-03-22 11:21:26.138 DMR, Setting [DMR] hangTimerInFrames -> 0
M: 2021-03-22 11:21:26.138 DMR, Setting [DMR] talkerAlias -> %callsign %location %description
M: 2021-03-22 11:21:26.138 DMR, Transmitting on 127.0.0.1:31100, and listening on port 31103.  Result = 1
Segmentation fault
root@localhost:/opt/MMDVM_Bridge#
 

Join main@DVSwitch.groups.io to automatically receive all group messages.