toggle quoted messageShow quoted text
WIRES x bridging would be done over RF using a radio and a
hotspot. DVSwitch therefore doesn't care about that part, so long
as the hotspot connecting the WIRES x room can talk to the
There is no way to connect a WIRES x room directly to a reflector
other than through RF, at least if you want to keep it purely in
the digital domain. I'm doing this through analog, connecting a
Yaesu HRI-200 to an Allstar node, but that's completely different.
On 7/22/2021 12:05 PM, David - AK2L
[Edited Message Follows]
[Reason: Add missing component]
I am not handling that part.
Once a week, I use MMDVM_Bridge to connect one of my YSF
reflectors (A) to another YSF reflector (B) so that my local club
members can participate in a net. YSF reflector (B) is bridged to
a WIRES-X room by the net operators. (I don't know how.)
The problem: Last week I attempted to check-in to the net. My
call sign appeared on the dashboard of YSF reflector (B), but net
control did not hear me.
The issue could be in my Pi-Star software, the YSF reflector
software, the MMDVM_Bridge software or
the YSF-to-WIRES-X bridge. I'm just trying to narrow it
down. Next week I plan to connect directly to the remote
reflector without the bridge to see if that helps.
Edit: Add missing component