Thanks Steve (again!) Starting to make a little more sense now. Was following some loose instructions that didn't mention two instances of MMDVM_Bridge being needed. And I also don't remember getting into DVSwitch.ini.
Here is my DVSwitch.ini.
; MMDVM_Bridge export / import configuration file.
; This file should be placed along side of MMDVM_Bridge or you can supply
; an absolute path in the DVSWITCH environment variable, e.g:
; DVSWITCH=/etc/MMDVM_Bridge/DVSwitch.ini
; before executing MMDVM_Bridge
;
; Another method to set the enviorment variable is to use the systemd unit file
; by adding:
; Environment=DVSWITCH=/etc/MMDVM_Bridge/DVSwitch.ini
; to /lib/systemd/system/mmdvm_bridge.service
; Configure the Quantar Repeater Partner
; Note that the TX and RX ports are already reversed for MMDVM_Bridge <--> Quantar_Bridge
[QUANTAR]
address = 0.0.0.0 ; Address to send IMBE TLV frames to (export)
txPort = 34103 ; Port to send IMBE TLV frames to (export)
rxPort = 34100 ; Port to listen for IMBE TLV frames on (import)
quantarPort = 1994 ; HDLC frames To/From the Quantar repeater
debug = 0 ; Debug 0 = off, 1 = on (adds lots of additional messages)
logLevel = 2 ; Logging levels, 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal
logFilePath = /var/log/dvswitch/Quantar_Bridge.log
; Configure the DMR Partner
; Audio format is AMBE 72 bit
[DMR]
address = 127.0.0.1 ; Address to send AMBE TLV frames to (export)
txPort = 31100 ; Port to send AMBE TLV frames to (export)
rxPort = 31103 ; Port to listen on (import)
slot = 2 ; Export slot
exportTG = 0 ; Which TG to export
hangTimerInFrames = 0 ; Use 50 for 3 seconds of hang time (3000 / 60)
talkerAlias = %callsign %location %description ; Get callsign location and description from MMDVM_Bridge.ini
; Configure the D-Star Partner
; Audio format is AMBE 48 bit (DSAMBE)
[DSTAR]
address = 127.0.0.1 ; Address to send AMBE TLV frames to (export)
txPort = 32100 ; Port to send AMBE TLV frames to (export)
rxPort = 32103 ; Port to listen on (import)
fallbackID = 1234567 ; In case we can not find a valid DMR id in the database, export this one
exportTG = 9 ; Which TG to export
slot = 2 ; Export slot
RemotePort = 54321 ; Port to send Gateway commands to
message = %location %description ; Get location and description from MMDVM_Bridge.ini
; Configure the NXDN Partner
; Audio format is AMBE 72 bit
[NXDN]
address = 127.0.0.1 ; Address to send AMBE TLV frames to (export)
txPort = 33100 ; Port to send AMBE TLV frames to (export)
rxPort = 33103 ; Port to listen on (import)
fallbackID = 1234567 ; In case we can not find a valid DMR id in the database, export this one
nxdnFallbackID = 12345 ; Use this ID when the input DMR ID is not found in the database
translate = 1234=4321 ; Translate NXDN TG < -- > DMR TG (bidirectional)
slot = 2 ; Export slot
RemotePort = 6075 ; Port to send Gateway commands to
; Configure the P25 Partner
; Audio format is IMBE 88 bit
[P25]
address = 127.0.0.1 ; Address to send AMBE TLV frames to (export)
txPort = 34100 ; Port to send AMBE TLV frames to (export)
rxPort = 34103 ; Port to listen on (import)
slot = 2 ; Export slot
RemotePort = 6074 ; Port to send Gateway commands to
; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
address = 127.0.0.1 ; Address to send AMBE TLV frames to (export)
txPort = 35100 ; Port to send AMBE TLV frames to (export)
rxPort = 35103 ; Port to listen on (import)
txWidePort = 35105 ; Port to send IMBE TLV frames to for YSFw (export)
fallbackID = 1234567 ; In case we can not find a valid DMR id in the database, export this one
exportTG = 9 ; Which TG to export
slot = 2 ; Export slot
RemotePort = 6073 ; Port to send Gateway commands to
; Configure the BrandMeister connection
; Simple Terminal Feature Update
; Audio format is AMBE 72 bit
[STFU] ; Brandmeister Open DMR Terminal (ODMRT) Protocol
BMAddress = 3102.repeater.net ; Brandmeister ODMRT server address
BMPort = 54006 ; Brandmeister ODMRT port
BMPassword = passw0rd ; Your Brandmeister password
Address = 127.0.0.1 ; Address to send AMBE TLV frames to (export)
txPort = 36100 ; Port to send AMBE TLV frames to (export)
rxPort = 36103 ; Port to listen on (import)
UserID = 123456789 ; Your DMR ID + SSID
TalkerAlias = N0CALL Name City ; Max 27 characters
StartTG = 3166 ; Startup talk group
LogLevel = 3 ; STFU log level (0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error)
[ASL]
address = 127.0.0.1
txPort = 30100
rxPort = 30103