Pull everything from the HB_Bridge branch.

I am running hblink.py……

In the new install I did not have a HB_Bridge.py so I copied it from the old install and placed in the new one…..Still not working… restarted all services…

 

 

################################################

# HB_Bridge configuration file.

################################################

 

[DEFAULTS]

gateway = 127.0.0.1                             # IP address of Partner Application (IPSC_Bridge, Analog_Bridge)

fromGatewayPort = 31003                         # Port HB_Bridge is listening on for data  (HB_Bridge <--- Partner)

toGatewayPort = 31000                           # Port Partner is listening on for data  (HB_Bridge ---> Partner)

 

[RULES]

# Name = Old TG, New TG, New Slot

TG_SE = 3174, 3174, 2

TG_NA = 3,3,1

TG_ATL = 8,8,1

TG_WW = 1,1,1

 

 

 

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> On Behalf Of Steve N4IRS
Sent: Saturday, April 14, 2018 5:57 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] ASL<>Analog_Bridge<>HBlink not working

 

Steve,
Assumptions:
You are running HB_Bridge.py not hblink.py
HB_Bridge ports are pointing at Analog_Bridge ports.

Post your HB_Bridge config file.

Steve

On 04/14/2018 05:15 PM, Steve Siesel [K4KSA] wrote:

 

 

All,

 

I’ve just upgraded to the latest Analog Bridge and HBLink from github and I am having some issues and need some help. Originally I was thinking my DV3000 was not working but after doing AMBEtest4.py it came back successful.

ASL does talk to analog_bridge…I see can see the PTT on and off:

 

                M: 2018-04-14 20:54:02.109 PTT on

              M: 2018-04-14 20:54:07.288 PTT off (keyed for 5179 ms)

 

However  I don’t see anything in the HBlink screen. Also I don’t see DMR transmissions made on the talkgroup:

 

INFO 2018-04-14 17:01:57,649 (REPEATER-1) Sending login request to master 74.91.114.19:62031

DEBUG 2018-04-14 17:01:57,650 CLIENT instance created: REPEATER-1, <__main__.HBSYSTEM instance at 0x764d3da0>

INFO 2018-04-14 17:01:57,690 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 2715672343

INFO 2018-04-14 17:01:57,737 (REPEATER-1) Repeater Authentication Accepted

INFO 2018-04-14 17:01:57,739 (REPEATER-1) Repeater Configuration Sent

INFO 2018-04-14 17:01:57,785 (REPEATER-1) Repeater Configuration Accepted

INFO 2018-04-14 17:01:57,786 (REPEATER-1) Connection to Master Completed

DEBUG 2018-04-14 17:02:02,652 (REPEATER-1) Client maintenance loop started

DEBUG 2018-04-14 17:02:02,653 (REPEATER-1) RPTPING Sent to Master. Total Sent: 0, Total Missed: 0, Currently Outstanding: 0

DEBUG 2018-04-14 17:02:02,693 (REPEATER-1) MSTPONG Received. Pongs Since Connected: 1

DEBUG 2018-04-14 17:02:07,652 (REPEATER-1) Client maintenance loop started

DEBUG 2018-04-14 17:02:07,653 (REPEATER-1) RPTPING Sent to Master. Total Sent: 1, Total Missed: 0, Currently Outstanding: 0

DEBUG 2018-04-14 17:02:07,693 (REPEATER-1) MSTPONG Received. Pongs Since Connected: 2

 

 

Here is my Analog_bridge.ini:

 

; Analog_Bridge configuration file.

;   This file should be placed in either /etc or it can be

;   supplied as a path on the Analog_Bridge command line.

 

; General Section describes settings for Analog_Bridge itself.

;   For RPI, don't forget to modprobe snd_pcm_oss to get the devices populated

[GENERAL]

; Audio devices are normally not needed when in gateway service.  These devices should

; only be set when local monitor or dongle modes are required.

 

logLevel = 2                    ; Show messages and above

outputAudioDevice = /dev/null   ; Audio device /dev/null, /dev/dsp1, portaudio, etc

inputAudioDevice = /dev/null    ; Only used for dongle mode

decoderFallBack = false         ; Use software AMBE decoder

 

; Below values are for using this as a local DMR dongle (no ASL needed)

useMicrophone = false           ; Use app as just a fancy dongle for DMR

useVox = false                  ; If using dongle mode (useMicrophone), enable VOX

voxDecay = 2                    ; Hang time in seconds

voxTrigger = 200                ; Value to trip PTT (0-32767)

 

; Information for xx_Bridge.py

[AMBE_AUDIO]

server = 127.0.0.1              ; IP address of xx_Bridge.py

fromDMRPort = 31000             ; AMBE frames from xx_Bridge (should match "toGatewayPort" in xx_Bridge.cfg)

toDMRPort = 31003               ; AMBE frames from xx_Bridge (should match "fromGatewayPort" in xx_Bridge.cfg)

ambeSize = 49                   ; 72 bit is HB_Bridge AMBE, 49 bit is IPSC_Bridge AMBE

minTxTimeMS = 2000              ; Minimum time in MS for hang delay

gatewayDmrId = 1112721          ; ID to use when transmitting from Analog_Bridge

repeaterID =   11127213         ; ID of source repeater

txTg = 31676                    ; TG to use for all frames received from Analog_Bridge -> xx_Bridge

txTs = 2                        ; Slot to use for frames received from Analog_Bridge -> xx_Bridge

colorCode = 1                   ; Color Code to assign DMR frames

 

; Information for USRP channel driver

;   This matches the rpt.conf ASL file with a setting like:

;   rxchannel = usrp/127.0.0.1:34001:32001

[USRP]

server = 127.0.0.1              ; IP address of Allstar/Asterisk

toASLPort = 32001               ; PCM from ASL

fromASLPort = 34001             ; PCM to ASL

aslAudio = AUDIO_USE_AGC        ; Audio to ASL (AUDIO_UNITY, AUDIO_USE_AGC, AUDIO_USE_GAIN)

agcGain = -20                   ; Gain (in db) of the AGC filter

dmrAudio = AUDIO_UNITY          ; Audio from ASL (AUDIO_UNITY, AUDIO_GAIN, AUDIO_BPF)

dmrGain = 0.35                  ; Gain factor of audio from ASL (0.0-1.0)

 

; Information for DV3000 hardware decoder

;   Use top server and port if using AMBEServer

;   Use bottom server/port and serial = true if using the DV3000u (thumbdv)

[DV3000]

; server = 127.0.0.1            ; IP address of AMBEServer

; port = 2460                   ; Port of AMBEServer

server = /dev/ttyUSB0           ; Device of DV3000U on this machine

port = 460800                   ; Baud rate of the dongle

serial = true                   ; Use serial (DV3000U) or IP

 

 

And my hblink.cfg:

 

# PROGRAM-WIDE PARAMETERS GO HERE

# PATH - working path for files, leave it alone unless you NEED to change it

# PING_TIME - the interval that clients will ping the master, and re-try registraion

#           - how often the Master maintenance loop runs

# MAX_MISSED - how many pings are missed before we give up and re-register

#           - number of times the master maintenance loop runs before de-registering a client

[GLOBAL]

PATH: ./

PING_TIME: 5

MAX_MISSED: 3

 

# SYSTEM LOGGER CONFIGURAITON

#   This allows the logger to be configured without chaning the individual

#   python logger stuff. LOG_FILE should be a complete path/filename for *your*

#   system -- use /dev/null for non-file handlers.

#   LOG_HANDERLS may be any of the following, please, no spaces in the

#   list if you use several:

#       null

#       console

#       console-timed

#       file

#       file-timed

#       syslog

#   LOG_LEVEL may be any of the standard syslog logging levels, though

#   as of now, DEBUG, INFO, WARNING and CRITICAL are the only ones

#   used.

#

[LOGGER]

LOG_FILE: /var/log/hblink.log

LOG_HANDLERS: console-timed

LOG_LEVEL: DEBUG

LOG_NAME: HBlink

 

# DOWNLOAD AND IMPORT SUBSCRIBER, PEER and TGID ALIASES

# Ok, not the TGID, there's no master list I know of to download

# This is intended as a facility for other applcations built on top of

# HBlink to use, and will NOT be used in HBlink directly.

# STALE_DAYS is the number of days since the last download before we

# download again. Don't be an ass and change this to less than a few days.

[ALIASES]

TRY_DOWNLOAD: True

PATH: ./

PEER_FILE: peer_ids.csv

SUBSCRIBER_FILE: subscriber_ids.json

TGID_FILE: talkgroup_ids.json

PEER_URL: http://www.dmr-marc.net/cgi-bin/trbo-database/datadump.cgi?table=repe$

SUBSCRIBER_URL: http://www.dmr-marc.net/cgi-bin/trbo-database/datadump.cgi?tabl$

STALE_DAYS: 7

 

 

# EXPORT AMBE DATA

# This is for exporting AMBE audio frames to an an "external" process for

# decoding or other nefarious actions.

[AMBE]

EXPORT_IP: 127.0.0.1

EXPORT_PORT: 1234

 

# MASTER INSTANCES - DUPLICATE SECTION FOR MULTIPLE MASTERS

# HomeBrew Protocol Master instances go here.

# IP may be left blank if there's one interface on your system.

# Port should be the port you want this master to listen on. It must be unique

# and unused by anything else.

# Repeat - if True, the master repeats traffic to clients, False, it does nothing.

[MASTER-1]

MODE: MASTER

ENABLED: False

REPEAT: True

EXPORT_AMBE: False

IP:

PORT: 54000

PASSPHRASE: s3cr37w0rd

GROUP_HANGTIME: 5

 

# CLIENT INSTANCES - DUPLICATE SECTION FOR MULTIPLE CLIENTS

# There are a LOT of errors in the HB Protocol specifications on this one!

# MOST of these items are just strings and will be properly dealt with by the program

# The TX & RX Frequencies are 9-digit numbers, and are the frequency in Hz.

# Latitude is an 8-digit unsigned floating point number.

# Longitude is a 9-digit signed floating point number.

# Height is in meters

[REPEATER-1]

MODE: CLIENT

ENABLED: True

EXPORT_AMBE: False

IP:

PORT: 54001

MASTER_IP: 3102.repeater.net

MASTER_PORT: 62031

PASSPHRASE: passw0rd

CALLSIGN: K4KSA

RADIO_ID: 11127213

RX_FREQ: 449000000

TX_FREQ: 444000000

TX_POWER: 25

COLORCODE: 1

SLOTS: 3

LATITUDE: 27.863859

LONGITUDE: -82.833252

HEIGHT: 40

LOCATION: Seminole, Florida

DESCRIPTION: DMR<> Allstar Gateway

URL: https://groups.io/g/DVSwitch

SOFTWARE_ID: 20170620

PACKAGE_ID: MMDVM_HBlink

GROUP_HANGTIME: 5

OPTIONS:

 

 

Any help would be appreciated!

Steve