Date   

Re: "Lost"

Chris Viningre
 

Does this file look correct?



On Tue, Jan 4, 2022 at 8:39 AM Steve N4IRS <szingman@...> wrote:
Analog_Reflector is already installed. There is the documentation to configure it. <http://dvswitch.org/Analog_Reflector.pdf>

On 1/4/2022 10:37 AM, Chris Viningre wrote:
I don't know how to enable and configure Analog_Reflector.


On Tue, Jan 4, 2022 at 8:26 AM Steve N4IRS <szingman@...> wrote:
You have 2 choices as to control.
1: As you are configured, use DTMF or DVSwitch Mobile in IAX mode to control the bridge
2: Enable and configure Analog_Reflector so that you can use DTMF from AllStar or DVSwitch Mobile in USRP mode.

On 1/4/2022 10:17 AM, Chris Viningre wrote:
I got the node working. The ports were reversed in the iax.rpt file. Now I just need a way to control it.



On Tue, Jan 4, 2022 at 8:02 AM Chris Viningre via groups.io <chris=ws5b.com@groups.io> wrote:
I see in the manuals that port numbers are 50000 and 55000 instead of the default of 32001 and 34001. Should I change them to the same port like 50111?


On Tue, Jan 4, 2022 at 7:24 AM Steve N4IRS <szingman@...> wrote:
I can not read that screen.

On 1/4/2022 9:15 AM, Chris Viningre wrote:
Is this the correct port for USRP?

image.png

On Tue, Jan 4, 2022 at 7:02 AM Chris Viningre via groups.io <chris=ws5b.com@groups.io> wrote:


On Tue, Jan 4, 2022 at 7:00 AM Chris Viningre via groups.io <chris=ws5b.com@groups.io> wrote:
If it helps you can call me at 915-504-1510 and/or connect through Teamviewer.


On Tue, Jan 4, 2022 at 6:55 AM Steve N4IRS <szingman@...> wrote:
OK,
The screenshot you sent is USRP not IAX. You are trying to connect to IP address of 127.0.0.1 which is local host, nit the IP address of the node.
I think I need to understand what you are trying to accomplish. I think I know, but I need to hear it from you.

Let's step back, so I can unde

On 1/4/2022 8:51 AM, Chris Viningre wrote:


On Tue, Jan 4, 2022 at 6:48 AM Steve N4IRS <szingman@...> wrote:
This should fix digital audio to and from 1999. You are connecting from Mobile in IAX mode?
Show me a screenshot from Mobile of the Account you are using to connect.

On 1/4/2022 8:45 AM, Chris Viningre wrote:
Made changes, still unable to connect with mobile or client.

On Tue, Jan 4, 2022 at 6:41 AM Steve N4IRS <szingman@...> wrote:
In /opt/Analog_Bridge/Analog_Bridge.ini

Change:
[USRP]
txPort = 50111                          ; Transmit USRP frames on this port
rxPort = 50111                          ; Listen for USRP frames on this port

To:
[USRP]
txPort = 32001                          ; Transmit USRP frames on this port
rxPort = 34001                          ; Listen for USRP frames on this port

restart Analog_Bridge:
systemctl restart analog_bridge



On 1/4/2022 8:31 AM, Chris Viningre wrote:


On Tue, Jan 4, 2022 at 6:27 AM Steve N4IRS <szingman@...> wrote:
Post your /etc/asterisk/rpt.conf and /opt/Analog_Bridge/Analog_Bridge.ini

On 1/4/2022 8:25 AM, Chris Viningre wrote:
Yes TX 32001 and RX 34001.  

On Tue, Jan 4, 2022 at 6:24 AM Steve N4IRS <szingman@...> wrote:
When you ran the dvs script, did you choose the defaults (just press enter) for the USRP ports?

On 1/4/2022 8:19 AM, Chris Viningre wrote:
Yes, freshly formatted and new image. Connected to a Kenwood repeater.

On Tue, Jan 4, 2022 at 6:13 AM Steve N4IRS <szingman@...> wrote:
OK,
So, now I know what I'm dealing with. Did you start with a fresh HamVoIP image?
Do you have a radio connected?

Steve

On 1/4/2022 8:12 AM, Chris Viningre wrote:

I'm not using a Shari. I'm using hamvoip on a Raspberry Pi. 

On Tue, Jan 4, 2022, 3:42 AM Steve N4IRS <szingman@...> wrote:
Is this a HamVoIP node? Please point me to the message you used to install.

Steve

On 1/3/22 11:12 PM, Chris Viningre wrote:
Steve,
Yes, the host is running both DVSwitch and AllStar. The DVSwitch is supposed to be connected to Allstar private node 1999. I'm able to connect that node to my public node 46040 but I do not receive audio from node 1999. I am trying to connect to the server with both my mobile and a Linux client. My mobile does register but will not allow me to make changes to the server. Linux appears to not connect to the server at all. 

On Mon, Jan 3, 2022 at 8:12 PM Steve N4IRS <szingman@...> wrote:
Chris,
So that I understand. You have a host running DVSwitch Server. Is it also running AllStar? You are trying to connect to your DVSwitch Server with Mobile via USRP?

On 1/3/22 10:07 PM, Chris Viningre wrote:
Thanks Steve,
I searched and followed a message here on groups.io. That install went smooth and seem to work. I had DVSwitch for years now using it for IAX connections to my Allstarlink nodes. I set it up base on the DVSwitch manual I found here in the file section. I'm using USRP.

Chris WS5B 



--




--



--



--



--



--



--


--


--



--


--



--




Re: "Lost"

Steve N4IRS
 

Analog_Reflector is already installed. There is the documentation to configure it. <http://dvswitch.org/Analog_Reflector.pdf>

On 1/4/2022 10:37 AM, Chris Viningre wrote:
I don't know how to enable and configure Analog_Reflector.


On Tue, Jan 4, 2022 at 8:26 AM Steve N4IRS <szingman@...> wrote:
You have 2 choices as to control.
1: As you are configured, use DTMF or DVSwitch Mobile in IAX mode to control the bridge
2: Enable and configure Analog_Reflector so that you can use DTMF from AllStar or DVSwitch Mobile in USRP mode.

On 1/4/2022 10:17 AM, Chris Viningre wrote:
I got the node working. The ports were reversed in the iax.rpt file. Now I just need a way to control it.



On Tue, Jan 4, 2022 at 8:02 AM Chris Viningre via groups.io <chris=ws5b.com@groups.io> wrote:
I see in the manuals that port numbers are 50000 and 55000 instead of the default of 32001 and 34001. Should I change them to the same port like 50111?


On Tue, Jan 4, 2022 at 7:24 AM Steve N4IRS <szingman@...> wrote:
I can not read that screen.

On 1/4/2022 9:15 AM, Chris Viningre wrote:
Is this the correct port for USRP?

image.png

On Tue, Jan 4, 2022 at 7:02 AM Chris Viningre via groups.io <chris=ws5b.com@groups.io> wrote:


On Tue, Jan 4, 2022 at 7:00 AM Chris Viningre via groups.io <chris=ws5b.com@groups.io> wrote:
If it helps you can call me at 915-504-1510 and/or connect through Teamviewer.


On Tue, Jan 4, 2022 at 6:55 AM Steve N4IRS <szingman@...> wrote:
OK,
The screenshot you sent is USRP not IAX. You are trying to connect to IP address of 127.0.0.1 which is local host, nit the IP address of the node.
I think I need to understand what you are trying to accomplish. I think I know, but I need to hear it from you.

Let's step back, so I can unde

On 1/4/2022 8:51 AM, Chris Viningre wrote:


On Tue, Jan 4, 2022 at 6:48 AM Steve N4IRS <szingman@...> wrote:
This should fix digital audio to and from 1999. You are connecting from Mobile in IAX mode?
Show me a screenshot from Mobile of the Account you are using to connect.

On 1/4/2022 8:45 AM, Chris Viningre wrote:
Made changes, still unable to connect with mobile or client.

On Tue, Jan 4, 2022 at 6:41 AM Steve N4IRS <szingman@...> wrote:
In /opt/Analog_Bridge/Analog_Bridge.ini

Change:
[USRP]
txPort = 50111                          ; Transmit USRP frames on this port
rxPort = 50111                          ; Listen for USRP frames on this port

To:
[USRP]
txPort = 32001                          ; Transmit USRP frames on this port
rxPort = 34001                          ; Listen for USRP frames on this port

restart Analog_Bridge:
systemctl restart analog_bridge



On 1/4/2022 8:31 AM, Chris Viningre wrote:


On Tue, Jan 4, 2022 at 6:27 AM Steve N4IRS <szingman@...> wrote:
Post your /etc/asterisk/rpt.conf and /opt/Analog_Bridge/Analog_Bridge.ini

On 1/4/2022 8:25 AM, Chris Viningre wrote:
Yes TX 32001 and RX 34001.  

On Tue, Jan 4, 2022 at 6:24 AM Steve N4IRS <szingman@...> wrote:
When you ran the dvs script, did you choose the defaults (just press enter) for the USRP ports?

On 1/4/2022 8:19 AM, Chris Viningre wrote:
Yes, freshly formatted and new image. Connected to a Kenwood repeater.

On Tue, Jan 4, 2022 at 6:13 AM Steve N4IRS <szingman@...> wrote:
OK,
So, now I know what I'm dealing with. Did you start with a fresh HamVoIP image?
Do you have a radio connected?

Steve

On 1/4/2022 8:12 AM, Chris Viningre wrote:

I'm not using a Shari. I'm using hamvoip on a Raspberry Pi. 

On Tue, Jan 4, 2022, 3:42 AM Steve N4IRS <szingman@...> wrote:
Is this a HamVoIP node? Please point me to the message you used to install.

Steve

On 1/3/22 11:12 PM, Chris Viningre wrote:
Steve,
Yes, the host is running both DVSwitch and AllStar. The DVSwitch is supposed to be connected to Allstar private node 1999. I'm able to connect that node to my public node 46040 but I do not receive audio from node 1999. I am trying to connect to the server with both my mobile and a Linux client. My mobile does register but will not allow me to make changes to the server. Linux appears to not connect to the server at all. 

On Mon, Jan 3, 2022 at 8:12 PM Steve N4IRS <szingman@...> wrote:
Chris,
So that I understand. You have a host running DVSwitch Server. Is it also running AllStar? You are trying to connect to your DVSwitch Server with Mobile via USRP?

On 1/3/22 10:07 PM, Chris Viningre wrote:
Thanks Steve,
I searched and followed a message here on groups.io. That install went smooth and seem to work. I had DVSwitch for years now using it for IAX connections to my Allstarlink nodes. I set it up base on the DVSwitch manual I found here in the file section. I'm using USRP.

Chris WS5B 



--




--



--



--



--



--



--


--


--



--


--



--


Re: "Lost"

Chris Viningre
 

I don't know how to enable and configure Analog_Reflector.


On Tue, Jan 4, 2022 at 8:26 AM Steve N4IRS <szingman@...> wrote:
You have 2 choices as to control.
1: As you are configured, use DTMF or DVSwitch Mobile in IAX mode to control the bridge
2: Enable and configure Analog_Reflector so that you can use DTMF from AllStar or DVSwitch Mobile in USRP mode.

On 1/4/2022 10:17 AM, Chris Viningre wrote:
I got the node working. The ports were reversed in the iax.rpt file. Now I just need a way to control it.



On Tue, Jan 4, 2022 at 8:02 AM Chris Viningre via groups.io <chris=ws5b.com@groups.io> wrote:
I see in the manuals that port numbers are 50000 and 55000 instead of the default of 32001 and 34001. Should I change them to the same port like 50111?


On Tue, Jan 4, 2022 at 7:24 AM Steve N4IRS <szingman@...> wrote:
I can not read that screen.

On 1/4/2022 9:15 AM, Chris Viningre wrote:
Is this the correct port for USRP?

image.png

On Tue, Jan 4, 2022 at 7:02 AM Chris Viningre via groups.io <chris=ws5b.com@groups.io> wrote:


On Tue, Jan 4, 2022 at 7:00 AM Chris Viningre via groups.io <chris=ws5b.com@groups.io> wrote:
If it helps you can call me at 915-504-1510 and/or connect through Teamviewer.


On Tue, Jan 4, 2022 at 6:55 AM Steve N4IRS <szingman@...> wrote:
OK,
The screenshot you sent is USRP not IAX. You are trying to connect to IP address of 127.0.0.1 which is local host, nit the IP address of the node.
I think I need to understand what you are trying to accomplish. I think I know, but I need to hear it from you.

Let's step back, so I can unde

On 1/4/2022 8:51 AM, Chris Viningre wrote:


On Tue, Jan 4, 2022 at 6:48 AM Steve N4IRS <szingman@...> wrote:
This should fix digital audio to and from 1999. You are connecting from Mobile in IAX mode?
Show me a screenshot from Mobile of the Account you are using to connect.

On 1/4/2022 8:45 AM, Chris Viningre wrote:
Made changes, still unable to connect with mobile or client.

On Tue, Jan 4, 2022 at 6:41 AM Steve N4IRS <szingman@...> wrote:
In /opt/Analog_Bridge/Analog_Bridge.ini

Change:
[USRP]
txPort = 50111                          ; Transmit USRP frames on this port
rxPort = 50111                          ; Listen for USRP frames on this port

To:
[USRP]
txPort = 32001                          ; Transmit USRP frames on this port
rxPort = 34001                          ; Listen for USRP frames on this port

restart Analog_Bridge:
systemctl restart analog_bridge



On 1/4/2022 8:31 AM, Chris Viningre wrote:


On Tue, Jan 4, 2022 at 6:27 AM Steve N4IRS <szingman@...> wrote:
Post your /etc/asterisk/rpt.conf and /opt/Analog_Bridge/Analog_Bridge.ini

On 1/4/2022 8:25 AM, Chris Viningre wrote:
Yes TX 32001 and RX 34001.  

On Tue, Jan 4, 2022 at 6:24 AM Steve N4IRS <szingman@...> wrote:
When you ran the dvs script, did you choose the defaults (just press enter) for the USRP ports?

On 1/4/2022 8:19 AM, Chris Viningre wrote:
Yes, freshly formatted and new image. Connected to a Kenwood repeater.

On Tue, Jan 4, 2022 at 6:13 AM Steve N4IRS <szingman@...> wrote:
OK,
So, now I know what I'm dealing with. Did you start with a fresh HamVoIP image?
Do you have a radio connected?

Steve

On 1/4/2022 8:12 AM, Chris Viningre wrote:

I'm not using a Shari. I'm using hamvoip on a Raspberry Pi. 

On Tue, Jan 4, 2022, 3:42 AM Steve N4IRS <szingman@...> wrote:
Is this a HamVoIP node? Please point me to the message you used to install.

Steve

On 1/3/22 11:12 PM, Chris Viningre wrote:
Steve,
Yes, the host is running both DVSwitch and AllStar. The DVSwitch is supposed to be connected to Allstar private node 1999. I'm able to connect that node to my public node 46040 but I do not receive audio from node 1999. I am trying to connect to the server with both my mobile and a Linux client. My mobile does register but will not allow me to make changes to the server. Linux appears to not connect to the server at all. 

On Mon, Jan 3, 2022 at 8:12 PM Steve N4IRS <szingman@...> wrote:
Chris,
So that I understand. You have a host running DVSwitch Server. Is it also running AllStar? You are trying to connect to your DVSwitch Server with Mobile via USRP?

On 1/3/22 10:07 PM, Chris Viningre wrote:
Thanks Steve,
I searched and followed a message here on groups.io. That install went smooth and seem to work. I had DVSwitch for years now using it for IAX connections to my Allstarlink nodes. I set it up base on the DVSwitch manual I found here in the file section. I'm using USRP.

Chris WS5B 



--




--



--



--



--



--



--


--


--



--


--




Re: "Lost"

Steve N4IRS
 

You have 2 choices as to control.
1: As you are configured, use DTMF or DVSwitch Mobile in IAX mode to control the bridge
2: Enable and configure Analog_Reflector so that you can use DTMF from AllStar or DVSwitch Mobile in USRP mode.

On 1/4/2022 10:17 AM, Chris Viningre wrote:
I got the node working. The ports were reversed in the iax.rpt file. Now I just need a way to control it.



On Tue, Jan 4, 2022 at 8:02 AM Chris Viningre via groups.io <chris=ws5b.com@groups.io> wrote:
I see in the manuals that port numbers are 50000 and 55000 instead of the default of 32001 and 34001. Should I change them to the same port like 50111?


On Tue, Jan 4, 2022 at 7:24 AM Steve N4IRS <szingman@...> wrote:
I can not read that screen.

On 1/4/2022 9:15 AM, Chris Viningre wrote:
Is this the correct port for USRP?

image.png

On Tue, Jan 4, 2022 at 7:02 AM Chris Viningre via groups.io <chris=ws5b.com@groups.io> wrote:


On Tue, Jan 4, 2022 at 7:00 AM Chris Viningre via groups.io <chris=ws5b.com@groups.io> wrote:
If it helps you can call me at 915-504-1510 and/or connect through Teamviewer.


On Tue, Jan 4, 2022 at 6:55 AM Steve N4IRS <szingman@...> wrote:
OK,
The screenshot you sent is USRP not IAX. You are trying to connect to IP address of 127.0.0.1 which is local host, nit the IP address of the node.
I think I need to understand what you are trying to accomplish. I think I know, but I need to hear it from you.

Let's step back, so I can unde

On 1/4/2022 8:51 AM, Chris Viningre wrote:


On Tue, Jan 4, 2022 at 6:48 AM Steve N4IRS <szingman@...> wrote:
This should fix digital audio to and from 1999. You are connecting from Mobile in IAX mode?
Show me a screenshot from Mobile of the Account you are using to connect.

On 1/4/2022 8:45 AM, Chris Viningre wrote:
Made changes, still unable to connect with mobile or client.

On Tue, Jan 4, 2022 at 6:41 AM Steve N4IRS <szingman@...> wrote:
In /opt/Analog_Bridge/Analog_Bridge.ini

Change:
[USRP]
txPort = 50111                          ; Transmit USRP frames on this port
rxPort = 50111                          ; Listen for USRP frames on this port

To:
[USRP]
txPort = 32001                          ; Transmit USRP frames on this port
rxPort = 34001                          ; Listen for USRP frames on this port

restart Analog_Bridge:
systemctl restart analog_bridge



On 1/4/2022 8:31 AM, Chris Viningre wrote:


On Tue, Jan 4, 2022 at 6:27 AM Steve N4IRS <szingman@...> wrote:
Post your /etc/asterisk/rpt.conf and /opt/Analog_Bridge/Analog_Bridge.ini

On 1/4/2022 8:25 AM, Chris Viningre wrote:
Yes TX 32001 and RX 34001.  

On Tue, Jan 4, 2022 at 6:24 AM Steve N4IRS <szingman@...> wrote:
When you ran the dvs script, did you choose the defaults (just press enter) for the USRP ports?

On 1/4/2022 8:19 AM, Chris Viningre wrote:
Yes, freshly formatted and new image. Connected to a Kenwood repeater.

On Tue, Jan 4, 2022 at 6:13 AM Steve N4IRS <szingman@...> wrote:
OK,
So, now I know what I'm dealing with. Did you start with a fresh HamVoIP image?
Do you have a radio connected?

Steve

On 1/4/2022 8:12 AM, Chris Viningre wrote:

I'm not using a Shari. I'm using hamvoip on a Raspberry Pi. 

On Tue, Jan 4, 2022, 3:42 AM Steve N4IRS <szingman@...> wrote:
Is this a HamVoIP node? Please point me to the message you used to install.

Steve

On 1/3/22 11:12 PM, Chris Viningre wrote:
Steve,
Yes, the host is running both DVSwitch and AllStar. The DVSwitch is supposed to be connected to Allstar private node 1999. I'm able to connect that node to my public node 46040 but I do not receive audio from node 1999. I am trying to connect to the server with both my mobile and a Linux client. My mobile does register but will not allow me to make changes to the server. Linux appears to not connect to the server at all. 

On Mon, Jan 3, 2022 at 8:12 PM Steve N4IRS <szingman@...> wrote:
Chris,
So that I understand. You have a host running DVSwitch Server. Is it also running AllStar? You are trying to connect to your DVSwitch Server with Mobile via USRP?

On 1/3/22 10:07 PM, Chris Viningre wrote:
Thanks Steve,
I searched and followed a message here on groups.io. That install went smooth and seem to work. I had DVSwitch for years now using it for IAX connections to my Allstarlink nodes. I set it up base on the DVSwitch manual I found here in the file section. I'm using USRP.

Chris WS5B 



--




--



--



--



--



--



--


--


--



--


--


Re: "Lost"

Chris Viningre
 

I got the node working. The ports were reversed in the iax.rpt file. Now I just need a way to control it.



On Tue, Jan 4, 2022 at 8:02 AM Chris Viningre via groups.io <chris=ws5b.com@groups.io> wrote:
I see in the manuals that port numbers are 50000 and 55000 instead of the default of 32001 and 34001. Should I change them to the same port like 50111?


On Tue, Jan 4, 2022 at 7:24 AM Steve N4IRS <szingman@...> wrote:
I can not read that screen.

On 1/4/2022 9:15 AM, Chris Viningre wrote:
Is this the correct port for USRP?

image.png

On Tue, Jan 4, 2022 at 7:02 AM Chris Viningre via groups.io <chris=ws5b.com@groups.io> wrote:


On Tue, Jan 4, 2022 at 7:00 AM Chris Viningre via groups.io <chris=ws5b.com@groups.io> wrote:
If it helps you can call me at 915-504-1510 and/or connect through Teamviewer.


On Tue, Jan 4, 2022 at 6:55 AM Steve N4IRS <szingman@...> wrote:
OK,
The screenshot you sent is USRP not IAX. You are trying to connect to IP address of 127.0.0.1 which is local host, nit the IP address of the node.
I think I need to understand what you are trying to accomplish. I think I know, but I need to hear it from you.

Let's step back, so I can unde

On 1/4/2022 8:51 AM, Chris Viningre wrote:


On Tue, Jan 4, 2022 at 6:48 AM Steve N4IRS <szingman@...> wrote:
This should fix digital audio to and from 1999. You are connecting from Mobile in IAX mode?
Show me a screenshot from Mobile of the Account you are using to connect.

On 1/4/2022 8:45 AM, Chris Viningre wrote:
Made changes, still unable to connect with mobile or client.

On Tue, Jan 4, 2022 at 6:41 AM Steve N4IRS <szingman@...> wrote:
In /opt/Analog_Bridge/Analog_Bridge.ini

Change:
[USRP]
txPort = 50111                          ; Transmit USRP frames on this port
rxPort = 50111                          ; Listen for USRP frames on this port

To:
[USRP]
txPort = 32001                          ; Transmit USRP frames on this port
rxPort = 34001                          ; Listen for USRP frames on this port

restart Analog_Bridge:
systemctl restart analog_bridge



On 1/4/2022 8:31 AM, Chris Viningre wrote:


On Tue, Jan 4, 2022 at 6:27 AM Steve N4IRS <szingman@...> wrote:
Post your /etc/asterisk/rpt.conf and /opt/Analog_Bridge/Analog_Bridge.ini

On 1/4/2022 8:25 AM, Chris Viningre wrote:
Yes TX 32001 and RX 34001.  

On Tue, Jan 4, 2022 at 6:24 AM Steve N4IRS <szingman@...> wrote:
When you ran the dvs script, did you choose the defaults (just press enter) for the USRP ports?

On 1/4/2022 8:19 AM, Chris Viningre wrote:
Yes, freshly formatted and new image. Connected to a Kenwood repeater.

On Tue, Jan 4, 2022 at 6:13 AM Steve N4IRS <szingman@...> wrote:
OK,
So, now I know what I'm dealing with. Did you start with a fresh HamVoIP image?
Do you have a radio connected?

Steve

On 1/4/2022 8:12 AM, Chris Viningre wrote:

I'm not using a Shari. I'm using hamvoip on a Raspberry Pi. 

On Tue, Jan 4, 2022, 3:42 AM Steve N4IRS <szingman@...> wrote:
Is this a HamVoIP node? Please point me to the message you used to install.

Steve

On 1/3/22 11:12 PM, Chris Viningre wrote:
Steve,
Yes, the host is running both DVSwitch and AllStar. The DVSwitch is supposed to be connected to Allstar private node 1999. I'm able to connect that node to my public node 46040 but I do not receive audio from node 1999. I am trying to connect to the server with both my mobile and a Linux client. My mobile does register but will not allow me to make changes to the server. Linux appears to not connect to the server at all. 

On Mon, Jan 3, 2022 at 8:12 PM Steve N4IRS <szingman@...> wrote:
Chris,
So that I understand. You have a host running DVSwitch Server. Is it also running AllStar? You are trying to connect to your DVSwitch Server with Mobile via USRP?

On 1/3/22 10:07 PM, Chris Viningre wrote:
Thanks Steve,
I searched and followed a message here on groups.io. That install went smooth and seem to work. I had DVSwitch for years now using it for IAX connections to my Allstarlink nodes. I set it up base on the DVSwitch manual I found here in the file section. I'm using USRP.

Chris WS5B 



--




--



--



--



--



--



--


--


--



--




Re: "Lost"

Chris Viningre
 

I see in the manuals that port numbers are 50000 and 55000 instead of the default of 32001 and 34001. Should I change them to the same port like 50111?


On Tue, Jan 4, 2022 at 7:24 AM Steve N4IRS <szingman@...> wrote:
I can not read that screen.

On 1/4/2022 9:15 AM, Chris Viningre wrote:
Is this the correct port for USRP?

image.png

On Tue, Jan 4, 2022 at 7:02 AM Chris Viningre via groups.io <chris=ws5b.com@groups.io> wrote:


On Tue, Jan 4, 2022 at 7:00 AM Chris Viningre via groups.io <chris=ws5b.com@groups.io> wrote:
If it helps you can call me at 915-504-1510 and/or connect through Teamviewer.


On Tue, Jan 4, 2022 at 6:55 AM Steve N4IRS <szingman@...> wrote:
OK,
The screenshot you sent is USRP not IAX. You are trying to connect to IP address of 127.0.0.1 which is local host, nit the IP address of the node.
I think I need to understand what you are trying to accomplish. I think I know, but I need to hear it from you.

Let's step back, so I can unde

On 1/4/2022 8:51 AM, Chris Viningre wrote:


On Tue, Jan 4, 2022 at 6:48 AM Steve N4IRS <szingman@...> wrote:
This should fix digital audio to and from 1999. You are connecting from Mobile in IAX mode?
Show me a screenshot from Mobile of the Account you are using to connect.

On 1/4/2022 8:45 AM, Chris Viningre wrote:
Made changes, still unable to connect with mobile or client.

On Tue, Jan 4, 2022 at 6:41 AM Steve N4IRS <szingman@...> wrote:
In /opt/Analog_Bridge/Analog_Bridge.ini

Change:
[USRP]
txPort = 50111                          ; Transmit USRP frames on this port
rxPort = 50111                          ; Listen for USRP frames on this port

To:
[USRP]
txPort = 32001                          ; Transmit USRP frames on this port
rxPort = 34001                          ; Listen for USRP frames on this port

restart Analog_Bridge:
systemctl restart analog_bridge



On 1/4/2022 8:31 AM, Chris Viningre wrote:


On Tue, Jan 4, 2022 at 6:27 AM Steve N4IRS <szingman@...> wrote:
Post your /etc/asterisk/rpt.conf and /opt/Analog_Bridge/Analog_Bridge.ini

On 1/4/2022 8:25 AM, Chris Viningre wrote:
Yes TX 32001 and RX 34001.  

On Tue, Jan 4, 2022 at 6:24 AM Steve N4IRS <szingman@...> wrote:
When you ran the dvs script, did you choose the defaults (just press enter) for the USRP ports?

On 1/4/2022 8:19 AM, Chris Viningre wrote:
Yes, freshly formatted and new image. Connected to a Kenwood repeater.

On Tue, Jan 4, 2022 at 6:13 AM Steve N4IRS <szingman@...> wrote:
OK,
So, now I know what I'm dealing with. Did you start with a fresh HamVoIP image?
Do you have a radio connected?

Steve

On 1/4/2022 8:12 AM, Chris Viningre wrote:

I'm not using a Shari. I'm using hamvoip on a Raspberry Pi. 

On Tue, Jan 4, 2022, 3:42 AM Steve N4IRS <szingman@...> wrote:
Is this a HamVoIP node? Please point me to the message you used to install.

Steve

On 1/3/22 11:12 PM, Chris Viningre wrote:
Steve,
Yes, the host is running both DVSwitch and AllStar. The DVSwitch is supposed to be connected to Allstar private node 1999. I'm able to connect that node to my public node 46040 but I do not receive audio from node 1999. I am trying to connect to the server with both my mobile and a Linux client. My mobile does register but will not allow me to make changes to the server. Linux appears to not connect to the server at all. 

On Mon, Jan 3, 2022 at 8:12 PM Steve N4IRS <szingman@...> wrote:
Chris,
So that I understand. You have a host running DVSwitch Server. Is it also running AllStar? You are trying to connect to your DVSwitch Server with Mobile via USRP?

On 1/3/22 10:07 PM, Chris Viningre wrote:
Thanks Steve,
I searched and followed a message here on groups.io. That install went smooth and seem to work. I had DVSwitch for years now using it for IAX connections to my Allstarlink nodes. I set it up base on the DVSwitch manual I found here in the file section. I'm using USRP.

Chris WS5B 



--




--



--



--



--



--



--


--


--




Re: "Lost"

Steve N4IRS
 

I can not read that screen.

On 1/4/2022 9:15 AM, Chris Viningre wrote:
Is this the correct port for USRP?

image.png

On Tue, Jan 4, 2022 at 7:02 AM Chris Viningre via groups.io <chris=ws5b.com@groups.io> wrote:


On Tue, Jan 4, 2022 at 7:00 AM Chris Viningre via groups.io <chris=ws5b.com@groups.io> wrote:
If it helps you can call me at 915-504-1510 and/or connect through Teamviewer.


On Tue, Jan 4, 2022 at 6:55 AM Steve N4IRS <szingman@...> wrote:
OK,
The screenshot you sent is USRP not IAX. You are trying to connect to IP address of 127.0.0.1 which is local host, nit the IP address of the node.
I think I need to understand what you are trying to accomplish. I think I know, but I need to hear it from you.

Let's step back, so I can unde

On 1/4/2022 8:51 AM, Chris Viningre wrote:


On Tue, Jan 4, 2022 at 6:48 AM Steve N4IRS <szingman@...> wrote:
This should fix digital audio to and from 1999. You are connecting from Mobile in IAX mode?
Show me a screenshot from Mobile of the Account you are using to connect.

On 1/4/2022 8:45 AM, Chris Viningre wrote:
Made changes, still unable to connect with mobile or client.

On Tue, Jan 4, 2022 at 6:41 AM Steve N4IRS <szingman@...> wrote:
In /opt/Analog_Bridge/Analog_Bridge.ini

Change:
[USRP]
txPort = 50111                          ; Transmit USRP frames on this port
rxPort = 50111                          ; Listen for USRP frames on this port

To:
[USRP]
txPort = 32001                          ; Transmit USRP frames on this port
rxPort = 34001                          ; Listen for USRP frames on this port

restart Analog_Bridge:
systemctl restart analog_bridge



On 1/4/2022 8:31 AM, Chris Viningre wrote:


On Tue, Jan 4, 2022 at 6:27 AM Steve N4IRS <szingman@...> wrote:
Post your /etc/asterisk/rpt.conf and /opt/Analog_Bridge/Analog_Bridge.ini

On 1/4/2022 8:25 AM, Chris Viningre wrote:
Yes TX 32001 and RX 34001.  

On Tue, Jan 4, 2022 at 6:24 AM Steve N4IRS <szingman@...> wrote:
When you ran the dvs script, did you choose the defaults (just press enter) for the USRP ports?

On 1/4/2022 8:19 AM, Chris Viningre wrote:
Yes, freshly formatted and new image. Connected to a Kenwood repeater.

On Tue, Jan 4, 2022 at 6:13 AM Steve N4IRS <szingman@...> wrote:
OK,
So, now I know what I'm dealing with. Did you start with a fresh HamVoIP image?
Do you have a radio connected?

Steve

On 1/4/2022 8:12 AM, Chris Viningre wrote:

I'm not using a Shari. I'm using hamvoip on a Raspberry Pi. 

On Tue, Jan 4, 2022, 3:42 AM Steve N4IRS <szingman@...> wrote:
Is this a HamVoIP node? Please point me to the message you used to install.

Steve

On 1/3/22 11:12 PM, Chris Viningre wrote:
Steve,
Yes, the host is running both DVSwitch and AllStar. The DVSwitch is supposed to be connected to Allstar private node 1999. I'm able to connect that node to my public node 46040 but I do not receive audio from node 1999. I am trying to connect to the server with both my mobile and a Linux client. My mobile does register but will not allow me to make changes to the server. Linux appears to not connect to the server at all. 

On Mon, Jan 3, 2022 at 8:12 PM Steve N4IRS <szingman@...> wrote:
Chris,
So that I understand. You have a host running DVSwitch Server. Is it also running AllStar? You are trying to connect to your DVSwitch Server with Mobile via USRP?

On 1/3/22 10:07 PM, Chris Viningre wrote:
Thanks Steve,
I searched and followed a message here on groups.io. That install went smooth and seem to work. I had DVSwitch for years now using it for IAX connections to my Allstarlink nodes. I set it up base on the DVSwitch manual I found here in the file section. I'm using USRP.

Chris WS5B 



--




--



--



--



--



--



--


--


--


Re: "Lost"

Chris Viningre
 

Is this the correct port for USRP?

image.png


On Tue, Jan 4, 2022 at 7:02 AM Chris Viningre via groups.io <chris=ws5b.com@groups.io> wrote:


On Tue, Jan 4, 2022 at 7:00 AM Chris Viningre via groups.io <chris=ws5b.com@groups.io> wrote:
If it helps you can call me at 915-504-1510 and/or connect through Teamviewer.


On Tue, Jan 4, 2022 at 6:55 AM Steve N4IRS <szingman@...> wrote:
OK,
The screenshot you sent is USRP not IAX. You are trying to connect to IP address of 127.0.0.1 which is local host, nit the IP address of the node.
I think I need to understand what you are trying to accomplish. I think I know, but I need to hear it from you.

Let's step back, so I can unde

On 1/4/2022 8:51 AM, Chris Viningre wrote:


On Tue, Jan 4, 2022 at 6:48 AM Steve N4IRS <szingman@...> wrote:
This should fix digital audio to and from 1999. You are connecting from Mobile in IAX mode?
Show me a screenshot from Mobile of the Account you are using to connect.

On 1/4/2022 8:45 AM, Chris Viningre wrote:
Made changes, still unable to connect with mobile or client.

On Tue, Jan 4, 2022 at 6:41 AM Steve N4IRS <szingman@...> wrote:
In /opt/Analog_Bridge/Analog_Bridge.ini

Change:
[USRP]
txPort = 50111                          ; Transmit USRP frames on this port
rxPort = 50111                          ; Listen for USRP frames on this port

To:
[USRP]
txPort = 32001                          ; Transmit USRP frames on this port
rxPort = 34001                          ; Listen for USRP frames on this port

restart Analog_Bridge:
systemctl restart analog_bridge



On 1/4/2022 8:31 AM, Chris Viningre wrote:


On Tue, Jan 4, 2022 at 6:27 AM Steve N4IRS <szingman@...> wrote:
Post your /etc/asterisk/rpt.conf and /opt/Analog_Bridge/Analog_Bridge.ini

On 1/4/2022 8:25 AM, Chris Viningre wrote:
Yes TX 32001 and RX 34001.  

On Tue, Jan 4, 2022 at 6:24 AM Steve N4IRS <szingman@...> wrote:
When you ran the dvs script, did you choose the defaults (just press enter) for the USRP ports?

On 1/4/2022 8:19 AM, Chris Viningre wrote:
Yes, freshly formatted and new image. Connected to a Kenwood repeater.

On Tue, Jan 4, 2022 at 6:13 AM Steve N4IRS <szingman@...> wrote:
OK,
So, now I know what I'm dealing with. Did you start with a fresh HamVoIP image?
Do you have a radio connected?

Steve

On 1/4/2022 8:12 AM, Chris Viningre wrote:

I'm not using a Shari. I'm using hamvoip on a Raspberry Pi. 

On Tue, Jan 4, 2022, 3:42 AM Steve N4IRS <szingman@...> wrote:
Is this a HamVoIP node? Please point me to the message you used to install.

Steve

On 1/3/22 11:12 PM, Chris Viningre wrote:
Steve,
Yes, the host is running both DVSwitch and AllStar. The DVSwitch is supposed to be connected to Allstar private node 1999. I'm able to connect that node to my public node 46040 but I do not receive audio from node 1999. I am trying to connect to the server with both my mobile and a Linux client. My mobile does register but will not allow me to make changes to the server. Linux appears to not connect to the server at all. 

On Mon, Jan 3, 2022 at 8:12 PM Steve N4IRS <szingman@...> wrote:
Chris,
So that I understand. You have a host running DVSwitch Server. Is it also running AllStar? You are trying to connect to your DVSwitch Server with Mobile via USRP?

On 1/3/22 10:07 PM, Chris Viningre wrote:
Thanks Steve,
I searched and followed a message here on groups.io. That install went smooth and seem to work. I had DVSwitch for years now using it for IAX connections to my Allstarlink nodes. I set it up base on the DVSwitch manual I found here in the file section. I'm using USRP.

Chris WS5B 



--




--



--



--



--



--



--



--




Re: "Lost"

Chris Viningre
 



On Tue, Jan 4, 2022 at 7:00 AM Chris Viningre via groups.io <chris=ws5b.com@groups.io> wrote:
If it helps you can call me at 915-504-1510 and/or connect through Teamviewer.


On Tue, Jan 4, 2022 at 6:55 AM Steve N4IRS <szingman@...> wrote:
OK,
The screenshot you sent is USRP not IAX. You are trying to connect to IP address of 127.0.0.1 which is local host, nit the IP address of the node.
I think I need to understand what you are trying to accomplish. I think I know, but I need to hear it from you.

Let's step back, so I can unde

On 1/4/2022 8:51 AM, Chris Viningre wrote:


On Tue, Jan 4, 2022 at 6:48 AM Steve N4IRS <szingman@...> wrote:
This should fix digital audio to and from 1999. You are connecting from Mobile in IAX mode?
Show me a screenshot from Mobile of the Account you are using to connect.

On 1/4/2022 8:45 AM, Chris Viningre wrote:
Made changes, still unable to connect with mobile or client.

On Tue, Jan 4, 2022 at 6:41 AM Steve N4IRS <szingman@...> wrote:
In /opt/Analog_Bridge/Analog_Bridge.ini

Change:
[USRP]
txPort = 50111                          ; Transmit USRP frames on this port
rxPort = 50111                          ; Listen for USRP frames on this port

To:
[USRP]
txPort = 32001                          ; Transmit USRP frames on this port
rxPort = 34001                          ; Listen for USRP frames on this port

restart Analog_Bridge:
systemctl restart analog_bridge



On 1/4/2022 8:31 AM, Chris Viningre wrote:


On Tue, Jan 4, 2022 at 6:27 AM Steve N4IRS <szingman@...> wrote:
Post your /etc/asterisk/rpt.conf and /opt/Analog_Bridge/Analog_Bridge.ini

On 1/4/2022 8:25 AM, Chris Viningre wrote:
Yes TX 32001 and RX 34001.  

On Tue, Jan 4, 2022 at 6:24 AM Steve N4IRS <szingman@...> wrote:
When you ran the dvs script, did you choose the defaults (just press enter) for the USRP ports?

On 1/4/2022 8:19 AM, Chris Viningre wrote:
Yes, freshly formatted and new image. Connected to a Kenwood repeater.

On Tue, Jan 4, 2022 at 6:13 AM Steve N4IRS <szingman@...> wrote:
OK,
So, now I know what I'm dealing with. Did you start with a fresh HamVoIP image?
Do you have a radio connected?

Steve

On 1/4/2022 8:12 AM, Chris Viningre wrote:

I'm not using a Shari. I'm using hamvoip on a Raspberry Pi. 

On Tue, Jan 4, 2022, 3:42 AM Steve N4IRS <szingman@...> wrote:
Is this a HamVoIP node? Please point me to the message you used to install.

Steve

On 1/3/22 11:12 PM, Chris Viningre wrote:
Steve,
Yes, the host is running both DVSwitch and AllStar. The DVSwitch is supposed to be connected to Allstar private node 1999. I'm able to connect that node to my public node 46040 but I do not receive audio from node 1999. I am trying to connect to the server with both my mobile and a Linux client. My mobile does register but will not allow me to make changes to the server. Linux appears to not connect to the server at all. 

On Mon, Jan 3, 2022 at 8:12 PM Steve N4IRS <szingman@...> wrote:
Chris,
So that I understand. You have a host running DVSwitch Server. Is it also running AllStar? You are trying to connect to your DVSwitch Server with Mobile via USRP?

On 1/3/22 10:07 PM, Chris Viningre wrote:
Thanks Steve,
I searched and followed a message here on groups.io. That install went smooth and seem to work. I had DVSwitch for years now using it for IAX connections to my Allstarlink nodes. I set it up base on the DVSwitch manual I found here in the file section. I'm using USRP.

Chris WS5B 



--




--



--



--



--



--



--



--


Re: "Lost"

Steve N4IRS
 

No, I don't use teamviewer and I don't have the time for a phone call.
I need to understand what you are trying to accomplish.

On 1/4/2022 9:00 AM, Chris Viningre wrote:
If it helps you can call me at 915-504-1510 and/or connect through Teamviewer.


On Tue, Jan 4, 2022 at 6:55 AM Steve N4IRS <szingman@...> wrote:
OK,
The screenshot you sent is USRP not IAX. You are trying to connect to IP address of 127.0.0.1 which is local host, nit the IP address of the node.
I think I need to understand what you are trying to accomplish. I think I know, but I need to hear it from you.

Let's step back, so I can unde

On 1/4/2022 8:51 AM, Chris Viningre wrote:


On Tue, Jan 4, 2022 at 6:48 AM Steve N4IRS <szingman@...> wrote:
This should fix digital audio to and from 1999. You are connecting from Mobile in IAX mode?
Show me a screenshot from Mobile of the Account you are using to connect.

On 1/4/2022 8:45 AM, Chris Viningre wrote:
Made changes, still unable to connect with mobile or client.

On Tue, Jan 4, 2022 at 6:41 AM Steve N4IRS <szingman@...> wrote:
In /opt/Analog_Bridge/Analog_Bridge.ini

Change:
[USRP]
txPort = 50111                          ; Transmit USRP frames on this port
rxPort = 50111                          ; Listen for USRP frames on this port

To:
[USRP]
txPort = 32001                          ; Transmit USRP frames on this port
rxPort = 34001                          ; Listen for USRP frames on this port

restart Analog_Bridge:
systemctl restart analog_bridge



On 1/4/2022 8:31 AM, Chris Viningre wrote:


On Tue, Jan 4, 2022 at 6:27 AM Steve N4IRS <szingman@...> wrote:
Post your /etc/asterisk/rpt.conf and /opt/Analog_Bridge/Analog_Bridge.ini

On 1/4/2022 8:25 AM, Chris Viningre wrote:
Yes TX 32001 and RX 34001.  

On Tue, Jan 4, 2022 at 6:24 AM Steve N4IRS <szingman@...> wrote:
When you ran the dvs script, did you choose the defaults (just press enter) for the USRP ports?

On 1/4/2022 8:19 AM, Chris Viningre wrote:
Yes, freshly formatted and new image. Connected to a Kenwood repeater.

On Tue, Jan 4, 2022 at 6:13 AM Steve N4IRS <szingman@...> wrote:
OK,
So, now I know what I'm dealing with. Did you start with a fresh HamVoIP image?
Do you have a radio connected?

Steve

On 1/4/2022 8:12 AM, Chris Viningre wrote:

I'm not using a Shari. I'm using hamvoip on a Raspberry Pi. 

On Tue, Jan 4, 2022, 3:42 AM Steve N4IRS <szingman@...> wrote:
Is this a HamVoIP node? Please point me to the message you used to install.

Steve

On 1/3/22 11:12 PM, Chris Viningre wrote:
Steve,
Yes, the host is running both DVSwitch and AllStar. The DVSwitch is supposed to be connected to Allstar private node 1999. I'm able to connect that node to my public node 46040 but I do not receive audio from node 1999. I am trying to connect to the server with both my mobile and a Linux client. My mobile does register but will not allow me to make changes to the server. Linux appears to not connect to the server at all. 

On Mon, Jan 3, 2022 at 8:12 PM Steve N4IRS <szingman@...> wrote:
Chris,
So that I understand. You have a host running DVSwitch Server. Is it also running AllStar? You are trying to connect to your DVSwitch Server with Mobile via USRP?

On 1/3/22 10:07 PM, Chris Viningre wrote:
Thanks Steve,
I searched and followed a message here on groups.io. That install went smooth and seem to work. I had DVSwitch for years now using it for IAX connections to my Allstarlink nodes. I set it up base on the DVSwitch manual I found here in the file section. I'm using USRP.

Chris WS5B 



--




--



--



--



--



--



--


Re: "Lost"

Chris Viningre
 

If it helps you can call me at 915-504-1510 and/or connect through Teamviewer.


On Tue, Jan 4, 2022 at 6:55 AM Steve N4IRS <szingman@...> wrote:
OK,
The screenshot you sent is USRP not IAX. You are trying to connect to IP address of 127.0.0.1 which is local host, nit the IP address of the node.
I think I need to understand what you are trying to accomplish. I think I know, but I need to hear it from you.

Let's step back, so I can unde

On 1/4/2022 8:51 AM, Chris Viningre wrote:


On Tue, Jan 4, 2022 at 6:48 AM Steve N4IRS <szingman@...> wrote:
This should fix digital audio to and from 1999. You are connecting from Mobile in IAX mode?
Show me a screenshot from Mobile of the Account you are using to connect.

On 1/4/2022 8:45 AM, Chris Viningre wrote:
Made changes, still unable to connect with mobile or client.

On Tue, Jan 4, 2022 at 6:41 AM Steve N4IRS <szingman@...> wrote:
In /opt/Analog_Bridge/Analog_Bridge.ini

Change:
[USRP]
txPort = 50111                          ; Transmit USRP frames on this port
rxPort = 50111                          ; Listen for USRP frames on this port

To:
[USRP]
txPort = 32001                          ; Transmit USRP frames on this port
rxPort = 34001                          ; Listen for USRP frames on this port

restart Analog_Bridge:
systemctl restart analog_bridge



On 1/4/2022 8:31 AM, Chris Viningre wrote:


On Tue, Jan 4, 2022 at 6:27 AM Steve N4IRS <szingman@...> wrote:
Post your /etc/asterisk/rpt.conf and /opt/Analog_Bridge/Analog_Bridge.ini

On 1/4/2022 8:25 AM, Chris Viningre wrote:
Yes TX 32001 and RX 34001.  

On Tue, Jan 4, 2022 at 6:24 AM Steve N4IRS <szingman@...> wrote:
When you ran the dvs script, did you choose the defaults (just press enter) for the USRP ports?

On 1/4/2022 8:19 AM, Chris Viningre wrote:
Yes, freshly formatted and new image. Connected to a Kenwood repeater.

On Tue, Jan 4, 2022 at 6:13 AM Steve N4IRS <szingman@...> wrote:
OK,
So, now I know what I'm dealing with. Did you start with a fresh HamVoIP image?
Do you have a radio connected?

Steve

On 1/4/2022 8:12 AM, Chris Viningre wrote:

I'm not using a Shari. I'm using hamvoip on a Raspberry Pi. 

On Tue, Jan 4, 2022, 3:42 AM Steve N4IRS <szingman@...> wrote:
Is this a HamVoIP node? Please point me to the message you used to install.

Steve

On 1/3/22 11:12 PM, Chris Viningre wrote:
Steve,
Yes, the host is running both DVSwitch and AllStar. The DVSwitch is supposed to be connected to Allstar private node 1999. I'm able to connect that node to my public node 46040 but I do not receive audio from node 1999. I am trying to connect to the server with both my mobile and a Linux client. My mobile does register but will not allow me to make changes to the server. Linux appears to not connect to the server at all. 

On Mon, Jan 3, 2022 at 8:12 PM Steve N4IRS <szingman@...> wrote:
Chris,
So that I understand. You have a host running DVSwitch Server. Is it also running AllStar? You are trying to connect to your DVSwitch Server with Mobile via USRP?

On 1/3/22 10:07 PM, Chris Viningre wrote:
Thanks Steve,
I searched and followed a message here on groups.io. That install went smooth and seem to work. I had DVSwitch for years now using it for IAX connections to my Allstarlink nodes. I set it up base on the DVSwitch manual I found here in the file section. I'm using USRP.

Chris WS5B 



--




--



--



--



--



--




Re: "Lost"

Steve N4IRS
 

Show me your Analog_Bridge log.

On 1/4/2022 8:57 AM, Chris Viningre wrote:
Ok, and I still have not received anything on 1999.


On Tue, Jan 4, 2022 at 6:55 AM Steve N4IRS <szingman@...> wrote:
OK,
The screenshot you sent is USRP not IAX. You are trying to connect to IP address of 127.0.0.1 which is local host, nit the IP address of the node.
I think I need to understand what you are trying to accomplish. I think I know, but I need to hear it from you.

Let's step back, so I can unde

On 1/4/2022 8:51 AM, Chris Viningre wrote:


On Tue, Jan 4, 2022 at 6:48 AM Steve N4IRS <szingman@...> wrote:
This should fix digital audio to and from 1999. You are connecting from Mobile in IAX mode?
Show me a screenshot from Mobile of the Account you are using to connect.

On 1/4/2022 8:45 AM, Chris Viningre wrote:
Made changes, still unable to connect with mobile or client.

On Tue, Jan 4, 2022 at 6:41 AM Steve N4IRS <szingman@...> wrote:
In /opt/Analog_Bridge/Analog_Bridge.ini

Change:
[USRP]
txPort = 50111                          ; Transmit USRP frames on this port
rxPort = 50111                          ; Listen for USRP frames on this port

To:
[USRP]
txPort = 32001                          ; Transmit USRP frames on this port
rxPort = 34001                          ; Listen for USRP frames on this port

restart Analog_Bridge:
systemctl restart analog_bridge



On 1/4/2022 8:31 AM, Chris Viningre wrote:


On Tue, Jan 4, 2022 at 6:27 AM Steve N4IRS <szingman@...> wrote:
Post your /etc/asterisk/rpt.conf and /opt/Analog_Bridge/Analog_Bridge.ini

On 1/4/2022 8:25 AM, Chris Viningre wrote:
Yes TX 32001 and RX 34001.  

On Tue, Jan 4, 2022 at 6:24 AM Steve N4IRS <szingman@...> wrote:
When you ran the dvs script, did you choose the defaults (just press enter) for the USRP ports?

On 1/4/2022 8:19 AM, Chris Viningre wrote:
Yes, freshly formatted and new image. Connected to a Kenwood repeater.

On Tue, Jan 4, 2022 at 6:13 AM Steve N4IRS <szingman@...> wrote:
OK,
So, now I know what I'm dealing with. Did you start with a fresh HamVoIP image?
Do you have a radio connected?

Steve

On 1/4/2022 8:12 AM, Chris Viningre wrote:

I'm not using a Shari. I'm using hamvoip on a Raspberry Pi. 

On Tue, Jan 4, 2022, 3:42 AM Steve N4IRS <szingman@...> wrote:
Is this a HamVoIP node? Please point me to the message you used to install.

Steve

On 1/3/22 11:12 PM, Chris Viningre wrote:
Steve,
Yes, the host is running both DVSwitch and AllStar. The DVSwitch is supposed to be connected to Allstar private node 1999. I'm able to connect that node to my public node 46040 but I do not receive audio from node 1999. I am trying to connect to the server with both my mobile and a Linux client. My mobile does register but will not allow me to make changes to the server. Linux appears to not connect to the server at all. 

On Mon, Jan 3, 2022 at 8:12 PM Steve N4IRS <szingman@...> wrote:
Chris,
So that I understand. You have a host running DVSwitch Server. Is it also running AllStar? You are trying to connect to your DVSwitch Server with Mobile via USRP?

On 1/3/22 10:07 PM, Chris Viningre wrote:
Thanks Steve,
I searched and followed a message here on groups.io. That install went smooth and seem to work. I had DVSwitch for years now using it for IAX connections to my Allstarlink nodes. I set it up base on the DVSwitch manual I found here in the file section. I'm using USRP.

Chris WS5B 



--




--



--



--



--



--



--


Re: "Lost"

Chris Viningre
 

Ok, and I still have not received anything on 1999.


On Tue, Jan 4, 2022 at 6:55 AM Steve N4IRS <szingman@...> wrote:
OK,
The screenshot you sent is USRP not IAX. You are trying to connect to IP address of 127.0.0.1 which is local host, nit the IP address of the node.
I think I need to understand what you are trying to accomplish. I think I know, but I need to hear it from you.

Let's step back, so I can unde

On 1/4/2022 8:51 AM, Chris Viningre wrote:


On Tue, Jan 4, 2022 at 6:48 AM Steve N4IRS <szingman@...> wrote:
This should fix digital audio to and from 1999. You are connecting from Mobile in IAX mode?
Show me a screenshot from Mobile of the Account you are using to connect.

On 1/4/2022 8:45 AM, Chris Viningre wrote:
Made changes, still unable to connect with mobile or client.

On Tue, Jan 4, 2022 at 6:41 AM Steve N4IRS <szingman@...> wrote:
In /opt/Analog_Bridge/Analog_Bridge.ini

Change:
[USRP]
txPort = 50111                          ; Transmit USRP frames on this port
rxPort = 50111                          ; Listen for USRP frames on this port

To:
[USRP]
txPort = 32001                          ; Transmit USRP frames on this port
rxPort = 34001                          ; Listen for USRP frames on this port

restart Analog_Bridge:
systemctl restart analog_bridge



On 1/4/2022 8:31 AM, Chris Viningre wrote:


On Tue, Jan 4, 2022 at 6:27 AM Steve N4IRS <szingman@...> wrote:
Post your /etc/asterisk/rpt.conf and /opt/Analog_Bridge/Analog_Bridge.ini

On 1/4/2022 8:25 AM, Chris Viningre wrote:
Yes TX 32001 and RX 34001.  

On Tue, Jan 4, 2022 at 6:24 AM Steve N4IRS <szingman@...> wrote:
When you ran the dvs script, did you choose the defaults (just press enter) for the USRP ports?

On 1/4/2022 8:19 AM, Chris Viningre wrote:
Yes, freshly formatted and new image. Connected to a Kenwood repeater.

On Tue, Jan 4, 2022 at 6:13 AM Steve N4IRS <szingman@...> wrote:
OK,
So, now I know what I'm dealing with. Did you start with a fresh HamVoIP image?
Do you have a radio connected?

Steve

On 1/4/2022 8:12 AM, Chris Viningre wrote:

I'm not using a Shari. I'm using hamvoip on a Raspberry Pi. 

On Tue, Jan 4, 2022, 3:42 AM Steve N4IRS <szingman@...> wrote:
Is this a HamVoIP node? Please point me to the message you used to install.

Steve

On 1/3/22 11:12 PM, Chris Viningre wrote:
Steve,
Yes, the host is running both DVSwitch and AllStar. The DVSwitch is supposed to be connected to Allstar private node 1999. I'm able to connect that node to my public node 46040 but I do not receive audio from node 1999. I am trying to connect to the server with both my mobile and a Linux client. My mobile does register but will not allow me to make changes to the server. Linux appears to not connect to the server at all. 

On Mon, Jan 3, 2022 at 8:12 PM Steve N4IRS <szingman@...> wrote:
Chris,
So that I understand. You have a host running DVSwitch Server. Is it also running AllStar? You are trying to connect to your DVSwitch Server with Mobile via USRP?

On 1/3/22 10:07 PM, Chris Viningre wrote:
Thanks Steve,
I searched and followed a message here on groups.io. That install went smooth and seem to work. I had DVSwitch for years now using it for IAX connections to my Allstarlink nodes. I set it up base on the DVSwitch manual I found here in the file section. I'm using USRP.

Chris WS5B 



--




--



--



--



--



--




Re: "Lost"

Steve N4IRS
 

OK,
The screenshot you sent is USRP not IAX. You are trying to connect to IP address of 127.0.0.1 which is local host, nit the IP address of the node.
I think I need to understand what you are trying to accomplish. I think I know, but I need to hear it from you.

Let's step back, so I can unde

On 1/4/2022 8:51 AM, Chris Viningre wrote:


On Tue, Jan 4, 2022 at 6:48 AM Steve N4IRS <szingman@...> wrote:
This should fix digital audio to and from 1999. You are connecting from Mobile in IAX mode?
Show me a screenshot from Mobile of the Account you are using to connect.

On 1/4/2022 8:45 AM, Chris Viningre wrote:
Made changes, still unable to connect with mobile or client.

On Tue, Jan 4, 2022 at 6:41 AM Steve N4IRS <szingman@...> wrote:
In /opt/Analog_Bridge/Analog_Bridge.ini

Change:
[USRP]
txPort = 50111                          ; Transmit USRP frames on this port
rxPort = 50111                          ; Listen for USRP frames on this port

To:
[USRP]
txPort = 32001                          ; Transmit USRP frames on this port
rxPort = 34001                          ; Listen for USRP frames on this port

restart Analog_Bridge:
systemctl restart analog_bridge



On 1/4/2022 8:31 AM, Chris Viningre wrote:


On Tue, Jan 4, 2022 at 6:27 AM Steve N4IRS <szingman@...> wrote:
Post your /etc/asterisk/rpt.conf and /opt/Analog_Bridge/Analog_Bridge.ini

On 1/4/2022 8:25 AM, Chris Viningre wrote:
Yes TX 32001 and RX 34001.  

On Tue, Jan 4, 2022 at 6:24 AM Steve N4IRS <szingman@...> wrote:
When you ran the dvs script, did you choose the defaults (just press enter) for the USRP ports?

On 1/4/2022 8:19 AM, Chris Viningre wrote:
Yes, freshly formatted and new image. Connected to a Kenwood repeater.

On Tue, Jan 4, 2022 at 6:13 AM Steve N4IRS <szingman@...> wrote:
OK,
So, now I know what I'm dealing with. Did you start with a fresh HamVoIP image?
Do you have a radio connected?

Steve

On 1/4/2022 8:12 AM, Chris Viningre wrote:

I'm not using a Shari. I'm using hamvoip on a Raspberry Pi. 

On Tue, Jan 4, 2022, 3:42 AM Steve N4IRS <szingman@...> wrote:
Is this a HamVoIP node? Please point me to the message you used to install.

Steve

On 1/3/22 11:12 PM, Chris Viningre wrote:
Steve,
Yes, the host is running both DVSwitch and AllStar. The DVSwitch is supposed to be connected to Allstar private node 1999. I'm able to connect that node to my public node 46040 but I do not receive audio from node 1999. I am trying to connect to the server with both my mobile and a Linux client. My mobile does register but will not allow me to make changes to the server. Linux appears to not connect to the server at all. 

On Mon, Jan 3, 2022 at 8:12 PM Steve N4IRS <szingman@...> wrote:
Chris,
So that I understand. You have a host running DVSwitch Server. Is it also running AllStar? You are trying to connect to your DVSwitch Server with Mobile via USRP?

On 1/3/22 10:07 PM, Chris Viningre wrote:
Thanks Steve,
I searched and followed a message here on groups.io. That install went smooth and seem to work. I had DVSwitch for years now using it for IAX connections to my Allstarlink nodes. I set it up base on the DVSwitch manual I found here in the file section. I'm using USRP.

Chris WS5B 



--




--



--



--



--



--


Re: "Lost"

Chris Viningre
 



On Tue, Jan 4, 2022 at 6:48 AM Steve N4IRS <szingman@...> wrote:
This should fix digital audio to and from 1999. You are connecting from Mobile in IAX mode?
Show me a screenshot from Mobile of the Account you are using to connect.

On 1/4/2022 8:45 AM, Chris Viningre wrote:
Made changes, still unable to connect with mobile or client.

On Tue, Jan 4, 2022 at 6:41 AM Steve N4IRS <szingman@...> wrote:
In /opt/Analog_Bridge/Analog_Bridge.ini

Change:
[USRP]
txPort = 50111                          ; Transmit USRP frames on this port
rxPort = 50111                          ; Listen for USRP frames on this port

To:
[USRP]
txPort = 32001                          ; Transmit USRP frames on this port
rxPort = 34001                          ; Listen for USRP frames on this port

restart Analog_Bridge:
systemctl restart analog_bridge



On 1/4/2022 8:31 AM, Chris Viningre wrote:


On Tue, Jan 4, 2022 at 6:27 AM Steve N4IRS <szingman@...> wrote:
Post your /etc/asterisk/rpt.conf and /opt/Analog_Bridge/Analog_Bridge.ini

On 1/4/2022 8:25 AM, Chris Viningre wrote:
Yes TX 32001 and RX 34001.  

On Tue, Jan 4, 2022 at 6:24 AM Steve N4IRS <szingman@...> wrote:
When you ran the dvs script, did you choose the defaults (just press enter) for the USRP ports?

On 1/4/2022 8:19 AM, Chris Viningre wrote:
Yes, freshly formatted and new image. Connected to a Kenwood repeater.

On Tue, Jan 4, 2022 at 6:13 AM Steve N4IRS <szingman@...> wrote:
OK,
So, now I know what I'm dealing with. Did you start with a fresh HamVoIP image?
Do you have a radio connected?

Steve

On 1/4/2022 8:12 AM, Chris Viningre wrote:

I'm not using a Shari. I'm using hamvoip on a Raspberry Pi. 

On Tue, Jan 4, 2022, 3:42 AM Steve N4IRS <szingman@...> wrote:
Is this a HamVoIP node? Please point me to the message you used to install.

Steve

On 1/3/22 11:12 PM, Chris Viningre wrote:
Steve,
Yes, the host is running both DVSwitch and AllStar. The DVSwitch is supposed to be connected to Allstar private node 1999. I'm able to connect that node to my public node 46040 but I do not receive audio from node 1999. I am trying to connect to the server with both my mobile and a Linux client. My mobile does register but will not allow me to make changes to the server. Linux appears to not connect to the server at all. 

On Mon, Jan 3, 2022 at 8:12 PM Steve N4IRS <szingman@...> wrote:
Chris,
So that I understand. You have a host running DVSwitch Server. Is it also running AllStar? You are trying to connect to your DVSwitch Server with Mobile via USRP?

On 1/3/22 10:07 PM, Chris Viningre wrote:
Thanks Steve,
I searched and followed a message here on groups.io. That install went smooth and seem to work. I had DVSwitch for years now using it for IAX connections to my Allstarlink nodes. I set it up base on the DVSwitch manual I found here in the file section. I'm using USRP.

Chris WS5B 



--




--



--



--



--



--


Re: "Lost"

Steve N4IRS
 

This should fix digital audio to and from 1999. You are connecting from Mobile in IAX mode?
Show me a screenshot from Mobile of the Account you are using to connect.

On 1/4/2022 8:45 AM, Chris Viningre wrote:
Made changes, still unable to connect with mobile or client.

On Tue, Jan 4, 2022 at 6:41 AM Steve N4IRS <szingman@...> wrote:
In /opt/Analog_Bridge/Analog_Bridge.ini

Change:
[USRP]
txPort = 50111                          ; Transmit USRP frames on this port
rxPort = 50111                          ; Listen for USRP frames on this port

To:
[USRP]
txPort = 32001                          ; Transmit USRP frames on this port
rxPort = 34001                          ; Listen for USRP frames on this port

restart Analog_Bridge:
systemctl restart analog_bridge



On 1/4/2022 8:31 AM, Chris Viningre wrote:


On Tue, Jan 4, 2022 at 6:27 AM Steve N4IRS <szingman@...> wrote:
Post your /etc/asterisk/rpt.conf and /opt/Analog_Bridge/Analog_Bridge.ini

On 1/4/2022 8:25 AM, Chris Viningre wrote:
Yes TX 32001 and RX 34001.  

On Tue, Jan 4, 2022 at 6:24 AM Steve N4IRS <szingman@...> wrote:
When you ran the dvs script, did you choose the defaults (just press enter) for the USRP ports?

On 1/4/2022 8:19 AM, Chris Viningre wrote:
Yes, freshly formatted and new image. Connected to a Kenwood repeater.

On Tue, Jan 4, 2022 at 6:13 AM Steve N4IRS <szingman@...> wrote:
OK,
So, now I know what I'm dealing with. Did you start with a fresh HamVoIP image?
Do you have a radio connected?

Steve

On 1/4/2022 8:12 AM, Chris Viningre wrote:

I'm not using a Shari. I'm using hamvoip on a Raspberry Pi. 

On Tue, Jan 4, 2022, 3:42 AM Steve N4IRS <szingman@...> wrote:
Is this a HamVoIP node? Please point me to the message you used to install.

Steve

On 1/3/22 11:12 PM, Chris Viningre wrote:
Steve,
Yes, the host is running both DVSwitch and AllStar. The DVSwitch is supposed to be connected to Allstar private node 1999. I'm able to connect that node to my public node 46040 but I do not receive audio from node 1999. I am trying to connect to the server with both my mobile and a Linux client. My mobile does register but will not allow me to make changes to the server. Linux appears to not connect to the server at all. 

On Mon, Jan 3, 2022 at 8:12 PM Steve N4IRS <szingman@...> wrote:
Chris,
So that I understand. You have a host running DVSwitch Server. Is it also running AllStar? You are trying to connect to your DVSwitch Server with Mobile via USRP?

On 1/3/22 10:07 PM, Chris Viningre wrote:
Thanks Steve,
I searched and followed a message here on groups.io. That install went smooth and seem to work. I had DVSwitch for years now using it for IAX connections to my Allstarlink nodes. I set it up base on the DVSwitch manual I found here in the file section. I'm using USRP.

Chris WS5B 



--




--



--



--



--


Re: "Lost"

Chris Viningre
 

Made changes, still unable to connect with mobile or client.


On Tue, Jan 4, 2022 at 6:41 AM Steve N4IRS <szingman@...> wrote:
In /opt/Analog_Bridge/Analog_Bridge.ini

Change:
[USRP]
txPort = 50111                          ; Transmit USRP frames on this port
rxPort = 50111                          ; Listen for USRP frames on this port

To:
[USRP]
txPort = 32001                          ; Transmit USRP frames on this port
rxPort = 34001                          ; Listen for USRP frames on this port

restart Analog_Bridge:
systemctl restart analog_bridge



On 1/4/2022 8:31 AM, Chris Viningre wrote:


On Tue, Jan 4, 2022 at 6:27 AM Steve N4IRS <szingman@...> wrote:
Post your /etc/asterisk/rpt.conf and /opt/Analog_Bridge/Analog_Bridge.ini

On 1/4/2022 8:25 AM, Chris Viningre wrote:
Yes TX 32001 and RX 34001.  

On Tue, Jan 4, 2022 at 6:24 AM Steve N4IRS <szingman@...> wrote:
When you ran the dvs script, did you choose the defaults (just press enter) for the USRP ports?

On 1/4/2022 8:19 AM, Chris Viningre wrote:
Yes, freshly formatted and new image. Connected to a Kenwood repeater.

On Tue, Jan 4, 2022 at 6:13 AM Steve N4IRS <szingman@...> wrote:
OK,
So, now I know what I'm dealing with. Did you start with a fresh HamVoIP image?
Do you have a radio connected?

Steve

On 1/4/2022 8:12 AM, Chris Viningre wrote:

I'm not using a Shari. I'm using hamvoip on a Raspberry Pi. 

On Tue, Jan 4, 2022, 3:42 AM Steve N4IRS <szingman@...> wrote:
Is this a HamVoIP node? Please point me to the message you used to install.

Steve

On 1/3/22 11:12 PM, Chris Viningre wrote:
Steve,
Yes, the host is running both DVSwitch and AllStar. The DVSwitch is supposed to be connected to Allstar private node 1999. I'm able to connect that node to my public node 46040 but I do not receive audio from node 1999. I am trying to connect to the server with both my mobile and a Linux client. My mobile does register but will not allow me to make changes to the server. Linux appears to not connect to the server at all. 

On Mon, Jan 3, 2022 at 8:12 PM Steve N4IRS <szingman@...> wrote:
Chris,
So that I understand. You have a host running DVSwitch Server. Is it also running AllStar? You are trying to connect to your DVSwitch Server with Mobile via USRP?

On 1/3/22 10:07 PM, Chris Viningre wrote:
Thanks Steve,
I searched and followed a message here on groups.io. That install went smooth and seem to work. I had DVSwitch for years now using it for IAX connections to my Allstarlink nodes. I set it up base on the DVSwitch manual I found here in the file section. I'm using USRP.

Chris WS5B 



--




--



--



--




Re: "Lost"

Steve N4IRS
 

In /opt/Analog_Bridge/Analog_Bridge.ini

Change:
[USRP]
txPort = 50111                          ; Transmit USRP frames on this port
rxPort = 50111                          ; Listen for USRP frames on this port

To:
[USRP]
txPort = 32001                          ; Transmit USRP frames on this port
rxPort = 34001                          ; Listen for USRP frames on this port

restart Analog_Bridge:
systemctl restart analog_bridge



On 1/4/2022 8:31 AM, Chris Viningre wrote:


On Tue, Jan 4, 2022 at 6:27 AM Steve N4IRS <szingman@...> wrote:
Post your /etc/asterisk/rpt.conf and /opt/Analog_Bridge/Analog_Bridge.ini

On 1/4/2022 8:25 AM, Chris Viningre wrote:
Yes TX 32001 and RX 34001.  

On Tue, Jan 4, 2022 at 6:24 AM Steve N4IRS <szingman@...> wrote:
When you ran the dvs script, did you choose the defaults (just press enter) for the USRP ports?

On 1/4/2022 8:19 AM, Chris Viningre wrote:
Yes, freshly formatted and new image. Connected to a Kenwood repeater.

On Tue, Jan 4, 2022 at 6:13 AM Steve N4IRS <szingman@...> wrote:
OK,
So, now I know what I'm dealing with. Did you start with a fresh HamVoIP image?
Do you have a radio connected?

Steve

On 1/4/2022 8:12 AM, Chris Viningre wrote:

I'm not using a Shari. I'm using hamvoip on a Raspberry Pi. 

On Tue, Jan 4, 2022, 3:42 AM Steve N4IRS <szingman@...> wrote:
Is this a HamVoIP node? Please point me to the message you used to install.

Steve

On 1/3/22 11:12 PM, Chris Viningre wrote:
Steve,
Yes, the host is running both DVSwitch and AllStar. The DVSwitch is supposed to be connected to Allstar private node 1999. I'm able to connect that node to my public node 46040 but I do not receive audio from node 1999. I am trying to connect to the server with both my mobile and a Linux client. My mobile does register but will not allow me to make changes to the server. Linux appears to not connect to the server at all. 

On Mon, Jan 3, 2022 at 8:12 PM Steve N4IRS <szingman@...> wrote:
Chris,
So that I understand. You have a host running DVSwitch Server. Is it also running AllStar? You are trying to connect to your DVSwitch Server with Mobile via USRP?

On 1/3/22 10:07 PM, Chris Viningre wrote:
Thanks Steve,
I searched and followed a message here on groups.io. That install went smooth and seem to work. I had DVSwitch for years now using it for IAX connections to my Allstarlink nodes. I set it up base on the DVSwitch manual I found here in the file section. I'm using USRP.

Chris WS5B 



--




--



--



--


Re: "Lost"

Chris Viningre
 



On Tue, Jan 4, 2022 at 6:27 AM Steve N4IRS <szingman@...> wrote:
Post your /etc/asterisk/rpt.conf and /opt/Analog_Bridge/Analog_Bridge.ini

On 1/4/2022 8:25 AM, Chris Viningre wrote:
Yes TX 32001 and RX 34001.  

On Tue, Jan 4, 2022 at 6:24 AM Steve N4IRS <szingman@...> wrote:
When you ran the dvs script, did you choose the defaults (just press enter) for the USRP ports?

On 1/4/2022 8:19 AM, Chris Viningre wrote:
Yes, freshly formatted and new image. Connected to a Kenwood repeater.

On Tue, Jan 4, 2022 at 6:13 AM Steve N4IRS <szingman@...> wrote:
OK,
So, now I know what I'm dealing with. Did you start with a fresh HamVoIP image?
Do you have a radio connected?

Steve

On 1/4/2022 8:12 AM, Chris Viningre wrote:

I'm not using a Shari. I'm using hamvoip on a Raspberry Pi. 

On Tue, Jan 4, 2022, 3:42 AM Steve N4IRS <szingman@...> wrote:
Is this a HamVoIP node? Please point me to the message you used to install.

Steve

On 1/3/22 11:12 PM, Chris Viningre wrote:
Steve,
Yes, the host is running both DVSwitch and AllStar. The DVSwitch is supposed to be connected to Allstar private node 1999. I'm able to connect that node to my public node 46040 but I do not receive audio from node 1999. I am trying to connect to the server with both my mobile and a Linux client. My mobile does register but will not allow me to make changes to the server. Linux appears to not connect to the server at all. 

On Mon, Jan 3, 2022 at 8:12 PM Steve N4IRS <szingman@...> wrote:
Chris,
So that I understand. You have a host running DVSwitch Server. Is it also running AllStar? You are trying to connect to your DVSwitch Server with Mobile via USRP?

On 1/3/22 10:07 PM, Chris Viningre wrote:
Thanks Steve,
I searched and followed a message here on groups.io. That install went smooth and seem to work. I had DVSwitch for years now using it for IAX connections to my Allstarlink nodes. I set it up base on the DVSwitch manual I found here in the file section. I'm using USRP.

Chris WS5B 



--




--



--



--


Re: "Lost"

Steve N4IRS
 

Post your /etc/asterisk/rpt.conf and /opt/Analog_Bridge/Analog_Bridge.ini

On 1/4/2022 8:25 AM, Chris Viningre wrote:
Yes TX 32001 and RX 34001.  

On Tue, Jan 4, 2022 at 6:24 AM Steve N4IRS <szingman@...> wrote:
When you ran the dvs script, did you choose the defaults (just press enter) for the USRP ports?

On 1/4/2022 8:19 AM, Chris Viningre wrote:
Yes, freshly formatted and new image. Connected to a Kenwood repeater.

On Tue, Jan 4, 2022 at 6:13 AM Steve N4IRS <szingman@...> wrote:
OK,
So, now I know what I'm dealing with. Did you start with a fresh HamVoIP image?
Do you have a radio connected?

Steve

On 1/4/2022 8:12 AM, Chris Viningre wrote:

I'm not using a Shari. I'm using hamvoip on a Raspberry Pi. 

On Tue, Jan 4, 2022, 3:42 AM Steve N4IRS <szingman@...> wrote:
Is this a HamVoIP node? Please point me to the message you used to install.

Steve

On 1/3/22 11:12 PM, Chris Viningre wrote:
Steve,
Yes, the host is running both DVSwitch and AllStar. The DVSwitch is supposed to be connected to Allstar private node 1999. I'm able to connect that node to my public node 46040 but I do not receive audio from node 1999. I am trying to connect to the server with both my mobile and a Linux client. My mobile does register but will not allow me to make changes to the server. Linux appears to not connect to the server at all. 

On Mon, Jan 3, 2022 at 8:12 PM Steve N4IRS <szingman@...> wrote:
Chris,
So that I understand. You have a host running DVSwitch Server. Is it also running AllStar? You are trying to connect to your DVSwitch Server with Mobile via USRP?

On 1/3/22 10:07 PM, Chris Viningre wrote:
Thanks Steve,
I searched and followed a message here on groups.io. That install went smooth and seem to work. I had DVSwitch for years now using it for IAX connections to my Allstarlink nodes. I set it up base on the DVSwitch manual I found here in the file section. I'm using USRP.

Chris WS5B 



--




--



--

761 - 780 of 10776