Date   

Re: IPSC to IPSC question?

jay@...
 

So I edited the hblink.cfg and added BM in the repeater section, it logs into BM successfully but then i get an MSTNAK from BM and the connection drops...

Whats this about? lol


Re: IPSC to IPSC question?

jay@...
 

Do you happen to have a sample config for HB_Bridge to connect to BM 3108?

Just not seeing it yet...


Re: Analog_Bridge + HBLink audio screech

G7RPG - Peter Kendall
 

Good question!

I'll test and report back. The whole point of wanting to do this is so I
can have YSF2DMR connected locally rather than having to go out and back
to BM which causes quite a bit of latency.

On 25/04/18 00:13, Steve N4IRS wrote:
Waht happens if you remove ysf2dmr?

On 04/24/2018 07:10 PM, G7RPG - Peter Kendall wrote:
Hi Steve,

Thanks for taking to time to have a look, see attached.

Peter


On 24/04/18 23:36, Steve N4IRS wrote:
Peter,
Can you give us a simple diagram of what you are doing?

On 04/24/2018 06:11 PM, G7RPG - Peter Kendall wrote:
Just a shot a little video that I hope shows the effect

https://www.youtube.com/watch?v=sIVn3OyDP_w


73
Peter
G7RPG


On 24/04/18 15:34, G7RPG - Peter Kendall wrote:
Hi All,

I've been linking my asl node to BM direct using Analog_Bridge and
HBlink-HB_Bridge, this has been working perfectly.

I'm trying to use a another instance of HBlink to create a local
proxy
for HBlink-HB_Bridge, YSF2DMR and an mmdvm_hs, its working fine apart
from a very loud audio screech being heard at the end of every
transmission coming from ASL on DMR.

Any suggestions?

73
Peter









Re: Analog_Bridge + HBLink audio screech

Steve N4IRS
 

Waht happens if you remove ysf2dmr?

On 04/24/2018 07:10 PM, G7RPG - Peter Kendall wrote:
Hi Steve,

Thanks for taking to time to have a look, see attached.

Peter


On 24/04/18 23:36, Steve N4IRS wrote:
Peter,
Can you give us a simple diagram of what you are doing?

On 04/24/2018 06:11 PM, G7RPG - Peter Kendall wrote:
Just a shot a little video that I hope shows the effect

https://www.youtube.com/watch?v=sIVn3OyDP_w


73
Peter
G7RPG


On 24/04/18 15:34, G7RPG - Peter Kendall wrote:
Hi All,

I've been linking my asl node to BM direct using Analog_Bridge and
HBlink-HB_Bridge, this has been working perfectly.

I'm trying to use a another instance of HBlink to create a local proxy
for HBlink-HB_Bridge, YSF2DMR and an mmdvm_hs, its working fine apart
from a very loud audio screech being heard at the end of every
transmission coming from ASL on DMR.

Any suggestions?

73
Peter





Re: Analog_Bridge + HBLink audio screech

G7RPG - Peter Kendall
 

Hi Steve,

Thanks for taking to time to have a look, see attached.

Peter

On 24/04/18 23:36, Steve N4IRS wrote:
Peter,
Can you give us a simple diagram of what you are doing?

On 04/24/2018 06:11 PM, G7RPG - Peter Kendall wrote:
Just a shot a little video that I hope shows the effect

https://www.youtube.com/watch?v=sIVn3OyDP_w


73
Peter
G7RPG


On 24/04/18 15:34, G7RPG - Peter Kendall wrote:
Hi All,

I've been linking my asl node to BM direct using Analog_Bridge and
HBlink-HB_Bridge, this has been working perfectly.

I'm trying to use a another instance of HBlink to create a local proxy
for HBlink-HB_Bridge, YSF2DMR and an mmdvm_hs, its working fine apart
from a very loud audio screech being heard at the end of every
transmission coming from ASL on DMR.

Any suggestions?

73
Peter







Re: IPSC to IPSC question?

Steve N4IRS
 

take it in small pieces.

On 04/24/2018 07:03 PM, jay@... wrote:
Ok,

Seems like a big feat but well giver  er a try lol

Thanks!!
73,


Re: IPSC to IPSC question?

jay@...
 

Ok,

Seems like a big feat but well giver  er a try lol

Thanks!!
73,


Re: IPSC to IPSC question?

Steve N4IRS
 

yes

On 04/24/2018 07:01 PM, jay@... wrote:
On Tue, Apr 24, 2018 at 03:58 pm, Steve N4IRS wrote:
BM <---> HB_Bridge <---> IPSC_Bridge <---> dmrlink
so,
BM <---> HB_Bridge <---> IPSC_Bridge <---> dmrlink <---> MASTER Repeater


Re: IPSC to IPSC question?

jay@...
 

On Tue, Apr 24, 2018 at 03:58 pm, Steve N4IRS wrote:
BM <---> HB_Bridge <---> IPSC_Bridge <---> dmrlink
so,
BM <---> HB_Bridge <---> IPSC_Bridge <---> dmrlink <---> MASTER Repeater


Re: IPSC to IPSC question?

Steve N4IRS
 

BM <---> HB_Bridge <---> IPSC_Bridge <---> dmrlink


On 04/24/2018 06:44 PM, jay@... wrote:
So what, it would be Repeater > dmrlink > HB_Bridge >IPSC_Bridge > dmrlink > BM ?


Re: IPSC to IPSC question?

jay@...
 

So what, it would be Repeater > dmrlink > HB_Bridge >IPSC_Bridge > dmrlink > BM ?


Re: IPSC to IPSC question?

Steve N4IRS
 

Short answer, yes. dmrlink can be a peer to a Motorola repeater as a Master.

On 04/24/2018 06:29 PM, jay@... wrote:
Awesome. thanks for the reply. So here is my next question,

So in order to run software diagnostics and other software the repeater needs to be in MASTER mode not Peer. Is there a way to have it in MASTER mode, Have confbridge connect to the repeater as a peer and also have confbridge connect out to the cbridge and route the traffic through to the repeater?

;)

73,


Re: IPSC to IPSC question?

Steve N4IRS
 

You can connect to BM with dmrlink, but it requires intervention from the BM admins. You can use HB_Bridge and IPSC_Bridge to build a connection to BM that you control.

On 04/24/2018 06:37 PM, jay@... wrote:
Any my next question will be how can I do the above with BM instead of the cbridge? ;)

Thanks!!!


Re: IPSC to IPSC question?

jay@...
 

Any my next question will be how can I do the above with BM instead of the cbridge? ;)

Thanks!!!


Re: Analog_Bridge + HBLink audio screech

Steve N4IRS
 

Peter,
Can you give us a simple diagram of what you are doing?

On 04/24/2018 06:11 PM, G7RPG - Peter Kendall wrote:
Just a shot a little video that I hope shows the effect

https://www.youtube.com/watch?v=sIVn3OyDP_w


73
Peter
G7RPG


On 24/04/18 15:34, G7RPG - Peter Kendall wrote:
Hi All,

I've been linking my asl node to BM direct using Analog_Bridge and
HBlink-HB_Bridge, this has been working perfectly.

I'm trying to use a another instance of HBlink to create a local proxy
for HBlink-HB_Bridge, YSF2DMR and an mmdvm_hs, its working fine apart
from a very loud audio screech being heard at the end of every
transmission coming from ASL on DMR.

Any suggestions?

73
Peter



Re: IPSC to IPSC question?

jay@...
 

Awesome. thanks for the reply. So here is my next question,

So in order to run software diagnostics and other software the repeater needs to be in MASTER mode not Peer. Is there a way to have it in MASTER mode, Have confbridge connect to the repeater as a peer and also have confbridge connect out to the cbridge and route the traffic through to the repeater?

;)

73,


Re: Analog_Bridge + HBLink audio screech

G7RPG - Peter Kendall
 

Just a shot a little video that I hope shows the effect

https://www.youtube.com/watch?v=sIVn3OyDP_w


73
Peter
G7RPG

On 24/04/18 15:34, G7RPG - Peter Kendall wrote:
Hi All,

I've been linking my asl node to BM direct using Analog_Bridge and
HBlink-HB_Bridge, this has been working perfectly.

I'm trying to use a another instance of HBlink to create a local proxy
for HBlink-HB_Bridge, YSF2DMR and an mmdvm_hs, its working fine apart
from a very loud audio screech being heard at the end of every
transmission coming from ASL on DMR.

Any suggestions?

73
Peter



Re: IPSC to IPSC question?

Cort N0MJS <n0mjs@...>
 

confbridge.py in DMRlink was intended to do exactly this, and to be a stand-alone “call router”. It’s been in production service as part of the K0USY Group “regional” network since it was first written… of course, that’s also why I wrote it :)

On Apr 24, 2018, at 2:53 PM, Steve N4IRS <szingman@...> wrote:

I did this type of thing with confbridge quite a while ago. You may also be able to use proxy.
Maybe someone else can chime in.

73, Steve N4IRS


On 4/24/2018 2:23 PM, jay@... wrote:
Hello,

I'm looking to connect my Trbo repeater to a "IPSC Gateway?" and that gateway connect to a c-bridge. Doing this for a "man in the middle" way of managing the talk groups etc. Is this doable and what would i use, IPSC_Gateway only?

Thanks!
73,


Cort Buffington
785-865-7206


Re: IPSC to IPSC question?

Steve N4IRS
 

I did this type of thing with confbridge quite a while ago. You may also be able to use proxy.
Maybe someone else can chime in.

73, Steve N4IRS


On 4/24/2018 2:23 PM, jay@... wrote:
Hello,

I'm looking to connect my Trbo repeater to a "IPSC Gateway?" and that gateway connect to a c-bridge. Doing this for a "man in the middle" way of managing the talk groups etc. Is this doable and what would i use, IPSC_Gateway only?

Thanks!
73,


IPSC to IPSC question?

jay@...
 

Hello,

I'm looking to connect my Trbo repeater to a "IPSC Gateway?" and that gateway connect to a c-bridge. Doing this for a "man in the middle" way of managing the talk groups etc. Is this doable and what would i use, IPSC_Gateway only?

Thanks!
73,

8901 - 8920 of 9886