Date   

Re: IPSC to IPSC question?

Steve N4IRS
 

Is the port number valid for the master you are connecting to?
Is the password valid for the master you are connecting to?
316202502 is 9 digits, Depending on the master, I don't think it's valid.

On 4/25/2018 9:12 AM, Jamie R. Cid wrote:
This dont seem to want to connect at all,

[REPEATER-1]
MODE: CLIENT
ENABLED: True
EXPORT_AMBE: False
IP:
PORT: 54001
MASTER_IP: 64.94.238.196
MASTER_PORT: 54000
PASSPHRASE: homebrew
CALLSIGN: N2CID
RADIO_ID: 316202502
RX_FREQ: 000000000
TX_FREQ: 000000000
TX_POWER: 25
COLORCODE: 1
SLOTS: 2
LATITUDE: 41.7333
LONGITUDE: -50.3999
HEIGHT: 75
LOCATION: NewYork, USA
DESCRIPTION: Motorola Repeater
URL: http://www.cidcomm.com
SOFTWARE_ID: 20170620
PACKAGE_ID: MMDVM_HBlink
GROUP_HANGTIME: 5
OPTIONS:


Re: IPSC to IPSC question?

Jamie R. Cid <jay@...>
 

This dont seem to want to connect at all,

[REPEATER-1]
MODE: CLIENT
ENABLED: True
EXPORT_AMBE: False
IP:
PORT: 54001
MASTER_IP: 64.94.238.196
MASTER_PORT: 54000
PASSPHRASE: homebrew
CALLSIGN: N2CID
RADIO_ID: 316202502
RX_FREQ: 000000000
TX_FREQ: 000000000
TX_POWER: 25
COLORCODE: 1
SLOTS: 2
LATITUDE: 41.7333
LONGITUDE: -50.3999
HEIGHT: 75
LOCATION: NewYork, USA
DESCRIPTION: Motorola Repeater
URL: http://www.cidcomm.com
SOFTWARE_ID: 20170620
PACKAGE_ID: MMDVM_HBlink
GROUP_HANGTIME: 5
OPTIONS:


Re: IPSC to IPSC question?

Jamie R. Cid <jay@...>
 

Dough. I changed password to passw0rd. 




Cheers,
Jay

On Apr 25, 2018, at 5:24 AM, Steve N4IRS <szingman@...> wrote:

[REPEATER-1]
MODE: CLIENT
ENABLED: True
EXPORT_AMBE: False
IP:
PORT: 54001
MASTER_IP: 172.16.1.1
MASTER_PORT: 54000
PASSPHRASE: homebrew
CALLSIGN: W1ABC
RADIO_ID: 312000
RX_FREQ: 449000000
TX_FREQ: 444000000
TX_POWER: 25
COLORCODE: 1
SLOTS: 1
LATITUDE: 38.0000
LONGITUDE: -095.0000
HEIGHT: 75
LOCATION: Anywhere, USA
DESCRIPTION: This is a cool repeater
URL: www.w1abc.org
SOFTWARE_ID: 20170620
PACKAGE_ID: MMDVM_HBlink
GROUP_HANGTIME: 5
OPTIONS:

What did you change from above?

On 04/24/2018 10:53 PM, Jamie R. Cid wrote:
What would I put if I'm using a motorola repeater?




Cheers,
Jay

On Apr 24, 2018, at 10:49 PM, Corey Dean N3FE <n3fe@...> wrote:

Did you add in the package Id and the software I’d?  It should connect right up of you did.

Corey. N3FE


On Apr 24, 2018, at 10:44 PM, jay@... wrote:

Same as this issue,

NC110 HBlink-HB_Bridge # ./hblink.py
DEBUG 2017-06-20 23:07:26,775 Logging system started, anything from here on gets logged
INFO 2017-06-20 23:07:26,775 HBlink 'HBlink.py' (c) 2016 N0MJS & the K0USY Group - SYSTEM STARTING...
DEBUG 2017-06-20 23:07:26,777 (REPEATER-1) Client maintenance loop started
INFO 2017-06-20 23:07:26,778 (REPEATER-1) Sending login request to master 91.121.101.163:62031
DEBUG 2017-06-20 23:07:26,779 CLIENT instance created: REPEATER-1, <__main__.HBSYSTEM instance at 0xb6851a6c>
INFO 2017-06-20 23:07:26,803 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 1721087229
INFO 2017-06-20 23:07:26,834 (REPEATER-1) Repeater Authentication Accepted
INFO 2017-06-20 23:07:26,835 (REPEATER-1) Repeater Configuration Sent
WARNING 2017-06-20 23:07:26,856 (REPEATER-1) MSTNAK Received
DEBUG 2017-06-20 23:07:31,779 (REPEATER-1) Client maintenance loop started
INFO 2017-06-20 23:07:31,780 (REPEATER-1) Sending login request to master 91.121.101.163:62031
INFO 2017-06-20 23:07:31,808 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 1776249007
INFO 2017-06-20 23:07:31,836 (REPEATER-1) Repeater Authentication Accepted
INFO 2017-06-20 23:07:31,837 (REPEATER-1) Repeater Configuration Sent
WARNING 2017-06-20 23:07:31,865 (REPEATER-1) MSTNAK Received
DEBUG 2017-06-20 23:07:36,782 (REPEATER-1) Client maintenance loop started
INFO 2017-06-20 23:07:36,783 (REPEATER-1) Sending login request to master 91.121.101.163:62031
INFO 2017-06-20 23:07:36,812 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 1330675359
INFO 2017-06-20 23:07:36,843 (REPEATER-1) Repeater Authentication Accepted
INFO 2017-06-20 23:07:36,844 (REPEATER-1) Repeater Configuration Sent
WARNING 2017-06-20 23:07:36,869 (REPEATER-1) MSTNAK Received
DEBUG 2017-06-20 23:07:41,782 (REPEATER-1) Client maintenance loop started
INFO 2017-06-20 23:07:41,783 (REPEATER-1) Sending login request to master 91.121.101.163:62031
INFO 2017-06-20 23:07:41,814 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 1297483179
INFO 2017-06-20 23:07:41,846 (REPEATER-1) Repeater Authentication Accepted
INFO 2017-06-20 23:07:41,847 (REPEATER-1) Repeater Configuration Sent
WARNING 2017-06-20 23:07:41,874 (REPEATER-1) MSTNAK Received

You mentioned:

Peter:
SOFTWARE_ID: 20170529
PACKAGE_ID: MMDVM_HBlink
??


DVSwitch and DMRPlus

J P Watters KC9KKO <kc9kko@...>
 

DVSwitch Coders,

Thanks again for you contributions. Your group has accomplished some pretty cool things since the initial commit to Github June 27th, 2013.

I would like to connect to DMRPlus.
I have an IPSC2 server instance running and it is connected to the DMRPlus Global Network

IPSC2 <--->IPSC_Bridge<--->DMRLink<--->Mototrbo Repeater

What kind of connection to I create to my IPSC2 server?

..jpw
KC9KKO









Re: IPSC to IPSC question?

Steve N4IRS
 

[REPEATER-1]
MODE: CLIENT
ENABLED: True
EXPORT_AMBE: False
IP:
PORT: 54001
MASTER_IP: 172.16.1.1
MASTER_PORT: 54000
PASSPHRASE: homebrew
CALLSIGN: W1ABC
RADIO_ID: 312000
RX_FREQ: 449000000
TX_FREQ: 444000000
TX_POWER: 25
COLORCODE: 1
SLOTS: 1
LATITUDE: 38.0000
LONGITUDE: -095.0000
HEIGHT: 75
LOCATION: Anywhere, USA
DESCRIPTION: This is a cool repeater
URL: www.w1abc.org
SOFTWARE_ID: 20170620
PACKAGE_ID: MMDVM_HBlink
GROUP_HANGTIME: 5
OPTIONS:

What did you change from above?

On 04/24/2018 10:53 PM, Jamie R. Cid wrote:
What would I put if I'm using a motorola repeater?




Cheers,
Jay

On Apr 24, 2018, at 10:49 PM, Corey Dean N3FE <n3fe@...> wrote:

Did you add in the package Id and the software I’d?  It should connect right up of you did.

Corey. N3FE


On Apr 24, 2018, at 10:44 PM, jay@... wrote:

Same as this issue,

NC110 HBlink-HB_Bridge # ./hblink.py
DEBUG 2017-06-20 23:07:26,775 Logging system started, anything from here on gets logged
INFO 2017-06-20 23:07:26,775 HBlink 'HBlink.py' (c) 2016 N0MJS & the K0USY Group - SYSTEM STARTING...
DEBUG 2017-06-20 23:07:26,777 (REPEATER-1) Client maintenance loop started
INFO 2017-06-20 23:07:26,778 (REPEATER-1) Sending login request to master 91.121.101.163:62031
DEBUG 2017-06-20 23:07:26,779 CLIENT instance created: REPEATER-1, <__main__.HBSYSTEM instance at 0xb6851a6c>
INFO 2017-06-20 23:07:26,803 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 1721087229
INFO 2017-06-20 23:07:26,834 (REPEATER-1) Repeater Authentication Accepted
INFO 2017-06-20 23:07:26,835 (REPEATER-1) Repeater Configuration Sent
WARNING 2017-06-20 23:07:26,856 (REPEATER-1) MSTNAK Received
DEBUG 2017-06-20 23:07:31,779 (REPEATER-1) Client maintenance loop started
INFO 2017-06-20 23:07:31,780 (REPEATER-1) Sending login request to master 91.121.101.163:62031
INFO 2017-06-20 23:07:31,808 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 1776249007
INFO 2017-06-20 23:07:31,836 (REPEATER-1) Repeater Authentication Accepted
INFO 2017-06-20 23:07:31,837 (REPEATER-1) Repeater Configuration Sent
WARNING 2017-06-20 23:07:31,865 (REPEATER-1) MSTNAK Received
DEBUG 2017-06-20 23:07:36,782 (REPEATER-1) Client maintenance loop started
INFO 2017-06-20 23:07:36,783 (REPEATER-1) Sending login request to master 91.121.101.163:62031
INFO 2017-06-20 23:07:36,812 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 1330675359
INFO 2017-06-20 23:07:36,843 (REPEATER-1) Repeater Authentication Accepted
INFO 2017-06-20 23:07:36,844 (REPEATER-1) Repeater Configuration Sent
WARNING 2017-06-20 23:07:36,869 (REPEATER-1) MSTNAK Received
DEBUG 2017-06-20 23:07:41,782 (REPEATER-1) Client maintenance loop started
INFO 2017-06-20 23:07:41,783 (REPEATER-1) Sending login request to master 91.121.101.163:62031
INFO 2017-06-20 23:07:41,814 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 1297483179
INFO 2017-06-20 23:07:41,846 (REPEATER-1) Repeater Authentication Accepted
INFO 2017-06-20 23:07:41,847 (REPEATER-1) Repeater Configuration Sent
WARNING 2017-06-20 23:07:41,874 (REPEATER-1) MSTNAK Received

You mentioned:

Peter:
SOFTWARE_ID: 20170529
PACKAGE_ID: MMDVM_HBlink
??


Re: IPSC to IPSC question?

jay@...
 

What would I put if I'm using a motorola repeater?




Cheers,
Jay

On Apr 24, 2018, at 10:49 PM, Corey Dean N3FE <n3fe@...> wrote:

Did you add in the package Id and the software I’d?  It should connect right up of you did.

Corey. N3FE


On Apr 24, 2018, at 10:44 PM, jay@... wrote:

Same as this issue,

NC110 HBlink-HB_Bridge # ./hblink.py
DEBUG 2017-06-20 23:07:26,775 Logging system started, anything from here on gets logged
INFO 2017-06-20 23:07:26,775 HBlink 'HBlink.py' (c) 2016 N0MJS & the K0USY Group - SYSTEM STARTING...
DEBUG 2017-06-20 23:07:26,777 (REPEATER-1) Client maintenance loop started
INFO 2017-06-20 23:07:26,778 (REPEATER-1) Sending login request to master 91.121.101.163:62031
DEBUG 2017-06-20 23:07:26,779 CLIENT instance created: REPEATER-1, <__main__.HBSYSTEM instance at 0xb6851a6c>
INFO 2017-06-20 23:07:26,803 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 1721087229
INFO 2017-06-20 23:07:26,834 (REPEATER-1) Repeater Authentication Accepted
INFO 2017-06-20 23:07:26,835 (REPEATER-1) Repeater Configuration Sent
WARNING 2017-06-20 23:07:26,856 (REPEATER-1) MSTNAK Received
DEBUG 2017-06-20 23:07:31,779 (REPEATER-1) Client maintenance loop started
INFO 2017-06-20 23:07:31,780 (REPEATER-1) Sending login request to master 91.121.101.163:62031
INFO 2017-06-20 23:07:31,808 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 1776249007
INFO 2017-06-20 23:07:31,836 (REPEATER-1) Repeater Authentication Accepted
INFO 2017-06-20 23:07:31,837 (REPEATER-1) Repeater Configuration Sent
WARNING 2017-06-20 23:07:31,865 (REPEATER-1) MSTNAK Received
DEBUG 2017-06-20 23:07:36,782 (REPEATER-1) Client maintenance loop started
INFO 2017-06-20 23:07:36,783 (REPEATER-1) Sending login request to master 91.121.101.163:62031
INFO 2017-06-20 23:07:36,812 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 1330675359
INFO 2017-06-20 23:07:36,843 (REPEATER-1) Repeater Authentication Accepted
INFO 2017-06-20 23:07:36,844 (REPEATER-1) Repeater Configuration Sent
WARNING 2017-06-20 23:07:36,869 (REPEATER-1) MSTNAK Received
DEBUG 2017-06-20 23:07:41,782 (REPEATER-1) Client maintenance loop started
INFO 2017-06-20 23:07:41,783 (REPEATER-1) Sending login request to master 91.121.101.163:62031
INFO 2017-06-20 23:07:41,814 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 1297483179
INFO 2017-06-20 23:07:41,846 (REPEATER-1) Repeater Authentication Accepted
INFO 2017-06-20 23:07:41,847 (REPEATER-1) Repeater Configuration Sent
WARNING 2017-06-20 23:07:41,874 (REPEATER-1) MSTNAK Received

You mentioned:

Peter:
SOFTWARE_ID: 20170529
PACKAGE_ID: MMDVM_HBlink
??


Re: IPSC to IPSC question?

Corey Dean N3FE <n3fe@...>
 

Did you add in the package Id and the software I’d?  It should connect right up of you did.

Corey. N3FE


On Apr 24, 2018, at 10:44 PM, jay@... wrote:

Same as this issue,

NC110 HBlink-HB_Bridge # ./hblink.py
DEBUG 2017-06-20 23:07:26,775 Logging system started, anything from here on gets logged
INFO 2017-06-20 23:07:26,775 HBlink 'HBlink.py' (c) 2016 N0MJS & the K0USY Group - SYSTEM STARTING...
DEBUG 2017-06-20 23:07:26,777 (REPEATER-1) Client maintenance loop started
INFO 2017-06-20 23:07:26,778 (REPEATER-1) Sending login request to master 91.121.101.163:62031
DEBUG 2017-06-20 23:07:26,779 CLIENT instance created: REPEATER-1, <__main__.HBSYSTEM instance at 0xb6851a6c>
INFO 2017-06-20 23:07:26,803 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 1721087229
INFO 2017-06-20 23:07:26,834 (REPEATER-1) Repeater Authentication Accepted
INFO 2017-06-20 23:07:26,835 (REPEATER-1) Repeater Configuration Sent
WARNING 2017-06-20 23:07:26,856 (REPEATER-1) MSTNAK Received
DEBUG 2017-06-20 23:07:31,779 (REPEATER-1) Client maintenance loop started
INFO 2017-06-20 23:07:31,780 (REPEATER-1) Sending login request to master 91.121.101.163:62031
INFO 2017-06-20 23:07:31,808 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 1776249007
INFO 2017-06-20 23:07:31,836 (REPEATER-1) Repeater Authentication Accepted
INFO 2017-06-20 23:07:31,837 (REPEATER-1) Repeater Configuration Sent
WARNING 2017-06-20 23:07:31,865 (REPEATER-1) MSTNAK Received
DEBUG 2017-06-20 23:07:36,782 (REPEATER-1) Client maintenance loop started
INFO 2017-06-20 23:07:36,783 (REPEATER-1) Sending login request to master 91.121.101.163:62031
INFO 2017-06-20 23:07:36,812 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 1330675359
INFO 2017-06-20 23:07:36,843 (REPEATER-1) Repeater Authentication Accepted
INFO 2017-06-20 23:07:36,844 (REPEATER-1) Repeater Configuration Sent
WARNING 2017-06-20 23:07:36,869 (REPEATER-1) MSTNAK Received
DEBUG 2017-06-20 23:07:41,782 (REPEATER-1) Client maintenance loop started
INFO 2017-06-20 23:07:41,783 (REPEATER-1) Sending login request to master 91.121.101.163:62031
INFO 2017-06-20 23:07:41,814 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 1297483179
INFO 2017-06-20 23:07:41,846 (REPEATER-1) Repeater Authentication Accepted
INFO 2017-06-20 23:07:41,847 (REPEATER-1) Repeater Configuration Sent
WARNING 2017-06-20 23:07:41,874 (REPEATER-1) MSTNAK Received

You mentioned:

Peter:
SOFTWARE_ID: 20170529
PACKAGE_ID: MMDVM_HBlink
??


Re: IPSC to IPSC question?

jay@...
 

Same as this issue,

NC110 HBlink-HB_Bridge # ./hblink.py
DEBUG 2017-06-20 23:07:26,775 Logging system started, anything from here on gets logged
INFO 2017-06-20 23:07:26,775 HBlink 'HBlink.py' (c) 2016 N0MJS & the K0USY Group - SYSTEM STARTING...
DEBUG 2017-06-20 23:07:26,777 (REPEATER-1) Client maintenance loop started
INFO 2017-06-20 23:07:26,778 (REPEATER-1) Sending login request to master 91.121.101.163:62031
DEBUG 2017-06-20 23:07:26,779 CLIENT instance created: REPEATER-1, <__main__.HBSYSTEM instance at 0xb6851a6c>
INFO 2017-06-20 23:07:26,803 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 1721087229
INFO 2017-06-20 23:07:26,834 (REPEATER-1) Repeater Authentication Accepted
INFO 2017-06-20 23:07:26,835 (REPEATER-1) Repeater Configuration Sent
WARNING 2017-06-20 23:07:26,856 (REPEATER-1) MSTNAK Received
DEBUG 2017-06-20 23:07:31,779 (REPEATER-1) Client maintenance loop started
INFO 2017-06-20 23:07:31,780 (REPEATER-1) Sending login request to master 91.121.101.163:62031
INFO 2017-06-20 23:07:31,808 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 1776249007
INFO 2017-06-20 23:07:31,836 (REPEATER-1) Repeater Authentication Accepted
INFO 2017-06-20 23:07:31,837 (REPEATER-1) Repeater Configuration Sent
WARNING 2017-06-20 23:07:31,865 (REPEATER-1) MSTNAK Received
DEBUG 2017-06-20 23:07:36,782 (REPEATER-1) Client maintenance loop started
INFO 2017-06-20 23:07:36,783 (REPEATER-1) Sending login request to master 91.121.101.163:62031
INFO 2017-06-20 23:07:36,812 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 1330675359
INFO 2017-06-20 23:07:36,843 (REPEATER-1) Repeater Authentication Accepted
INFO 2017-06-20 23:07:36,844 (REPEATER-1) Repeater Configuration Sent
WARNING 2017-06-20 23:07:36,869 (REPEATER-1) MSTNAK Received
DEBUG 2017-06-20 23:07:41,782 (REPEATER-1) Client maintenance loop started
INFO 2017-06-20 23:07:41,783 (REPEATER-1) Sending login request to master 91.121.101.163:62031
INFO 2017-06-20 23:07:41,814 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 1297483179
INFO 2017-06-20 23:07:41,846 (REPEATER-1) Repeater Authentication Accepted
INFO 2017-06-20 23:07:41,847 (REPEATER-1) Repeater Configuration Sent
WARNING 2017-06-20 23:07:41,874 (REPEATER-1) MSTNAK Received

You mentioned:

Peter:
SOFTWARE_ID: 20170529
PACKAGE_ID: MMDVM_HBlink
??


Re: IPSC to IPSC question?

jay@...
 

So I edited the hblink.cfg and added BM in the repeater section, it logs into BM successfully but then i get an MSTNAK from BM and the connection drops...

Whats this about? lol


Re: IPSC to IPSC question?

jay@...
 

Do you happen to have a sample config for HB_Bridge to connect to BM 3108?

Just not seeing it yet...


Re: Analog_Bridge + HBLink audio screech

G7RPG - Peter Kendall
 

Good question!

I'll test and report back. The whole point of wanting to do this is so I
can have YSF2DMR connected locally rather than having to go out and back
to BM which causes quite a bit of latency.

On 25/04/18 00:13, Steve N4IRS wrote:
Waht happens if you remove ysf2dmr?

On 04/24/2018 07:10 PM, G7RPG - Peter Kendall wrote:
Hi Steve,

Thanks for taking to time to have a look, see attached.

Peter


On 24/04/18 23:36, Steve N4IRS wrote:
Peter,
Can you give us a simple diagram of what you are doing?

On 04/24/2018 06:11 PM, G7RPG - Peter Kendall wrote:
Just a shot a little video that I hope shows the effect

https://www.youtube.com/watch?v=sIVn3OyDP_w


73
Peter
G7RPG


On 24/04/18 15:34, G7RPG - Peter Kendall wrote:
Hi All,

I've been linking my asl node to BM direct using Analog_Bridge and
HBlink-HB_Bridge, this has been working perfectly.

I'm trying to use a another instance of HBlink to create a local
proxy
for HBlink-HB_Bridge, YSF2DMR and an mmdvm_hs, its working fine apart
from a very loud audio screech being heard at the end of every
transmission coming from ASL on DMR.

Any suggestions?

73
Peter









Re: Analog_Bridge + HBLink audio screech

Steve N4IRS
 

Waht happens if you remove ysf2dmr?

On 04/24/2018 07:10 PM, G7RPG - Peter Kendall wrote:
Hi Steve,

Thanks for taking to time to have a look, see attached.

Peter


On 24/04/18 23:36, Steve N4IRS wrote:
Peter,
Can you give us a simple diagram of what you are doing?

On 04/24/2018 06:11 PM, G7RPG - Peter Kendall wrote:
Just a shot a little video that I hope shows the effect

https://www.youtube.com/watch?v=sIVn3OyDP_w


73
Peter
G7RPG


On 24/04/18 15:34, G7RPG - Peter Kendall wrote:
Hi All,

I've been linking my asl node to BM direct using Analog_Bridge and
HBlink-HB_Bridge, this has been working perfectly.

I'm trying to use a another instance of HBlink to create a local proxy
for HBlink-HB_Bridge, YSF2DMR and an mmdvm_hs, its working fine apart
from a very loud audio screech being heard at the end of every
transmission coming from ASL on DMR.

Any suggestions?

73
Peter





Re: Analog_Bridge + HBLink audio screech

G7RPG - Peter Kendall
 

Hi Steve,

Thanks for taking to time to have a look, see attached.

Peter

On 24/04/18 23:36, Steve N4IRS wrote:
Peter,
Can you give us a simple diagram of what you are doing?

On 04/24/2018 06:11 PM, G7RPG - Peter Kendall wrote:
Just a shot a little video that I hope shows the effect

https://www.youtube.com/watch?v=sIVn3OyDP_w


73
Peter
G7RPG


On 24/04/18 15:34, G7RPG - Peter Kendall wrote:
Hi All,

I've been linking my asl node to BM direct using Analog_Bridge and
HBlink-HB_Bridge, this has been working perfectly.

I'm trying to use a another instance of HBlink to create a local proxy
for HBlink-HB_Bridge, YSF2DMR and an mmdvm_hs, its working fine apart
from a very loud audio screech being heard at the end of every
transmission coming from ASL on DMR.

Any suggestions?

73
Peter







Re: IPSC to IPSC question?

Steve N4IRS
 

take it in small pieces.

On 04/24/2018 07:03 PM, jay@... wrote:
Ok,

Seems like a big feat but well giver  er a try lol

Thanks!!
73,


Re: IPSC to IPSC question?

jay@...
 

Ok,

Seems like a big feat but well giver  er a try lol

Thanks!!
73,


Re: IPSC to IPSC question?

Steve N4IRS
 

yes

On 04/24/2018 07:01 PM, jay@... wrote:
On Tue, Apr 24, 2018 at 03:58 pm, Steve N4IRS wrote:
BM <---> HB_Bridge <---> IPSC_Bridge <---> dmrlink
so,
BM <---> HB_Bridge <---> IPSC_Bridge <---> dmrlink <---> MASTER Repeater


Re: IPSC to IPSC question?

jay@...
 

On Tue, Apr 24, 2018 at 03:58 pm, Steve N4IRS wrote:
BM <---> HB_Bridge <---> IPSC_Bridge <---> dmrlink
so,
BM <---> HB_Bridge <---> IPSC_Bridge <---> dmrlink <---> MASTER Repeater


Re: IPSC to IPSC question?

Steve N4IRS
 

BM <---> HB_Bridge <---> IPSC_Bridge <---> dmrlink


On 04/24/2018 06:44 PM, jay@... wrote:
So what, it would be Repeater > dmrlink > HB_Bridge >IPSC_Bridge > dmrlink > BM ?


Re: IPSC to IPSC question?

jay@...
 

So what, it would be Repeater > dmrlink > HB_Bridge >IPSC_Bridge > dmrlink > BM ?


Re: IPSC to IPSC question?

Steve N4IRS
 

Short answer, yes. dmrlink can be a peer to a Motorola repeater as a Master.

On 04/24/2018 06:29 PM, jay@... wrote:
Awesome. thanks for the reply. So here is my next question,

So in order to run software diagnostics and other software the repeater needs to be in MASTER mode not Peer. Is there a way to have it in MASTER mode, Have confbridge connect to the repeater as a peer and also have confbridge connect out to the cbridge and route the traffic through to the repeater?

;)

73,

8821 - 8840 of 9814