Date   

Re: DVSwitch HAMVOIP #dvs

John EA5JAV/M0JCA
 

yeap I rebooted, stanza did not appear to have been added, I just added it manually and getting a step further in that I'm getting a Failure code: 3 Invalid Node number, I've checked the stanza in both iax.conf, extensions.conf and DVS Mobile and all the same, I'll continue to check further when I'm back home after my shift, thanks again!

What's strange when I run firsttime.sh it continually reboots, and I can't get past that menu when I log back in.

Sorry for all the hassle, learning on the job :)

John


Re: Monit: YSFGateway: does not exist

IK7VXC Mike
 

Thank you Steve.


Re: Monit: YSFGateway: does not exist

Steve N4IRS
 

I don't know what to tell you. As long as the service is actually running don't worry about it. This is the first I have heard of this.

On 1/26/2022 12:49 PM, IK7VXC Mike wrote:
I gave it some time but I also rebooted the RPi. Every process gets green but the YSFGateway.


Re: DVSwitch HAMVOIP #dvs

Steve N4IRS
 

Did you reboot?
I'm not sure about iaxclient, you could add it if you need it. The install script adds a stanza in you iax.conf (after you run firsttime) 

[N4IRS]
type = friend
context = iax-client
auth = md5
secret = bigsecret!
host = dynamic
disallow = all
allow = slin
allow = ulaw
allow = adpcm
transfer = no
codecpriority = Caller
requirecalltoken = no

This is created along with iax-client in extensions.conf so you can use DVSM.

Steve


On 1/26/2022 12:45 PM, John-EA5JAV wrote:
Hi Steve,thanks again, DVSwitch part working fine, can now access via USRP so really happy.

For Allstar, I've followed your instructions and ran .firsttime.sh which I found in /usr/local/sbin but my option to check node details etc doesn't work, every time I try to change says "Node Configuration will be run after reboot", even from the main menu.

I looked at /etc/asterisk/iax.conf and notice that [IAXCLIENT] is not there, in the backup I took it was, here are the details prior to the change (have chaned my password below for info purposes to xxxxxx)...

[iaxclient]
type=friend
context=iaxclient
auth=md5
secret=xxxxxxx
host=dynamic
disallow=all
allow=slin
allow=ulaw
allow=adpcm
transfer=no
codecpriority=Caller

I did insert this into iax.conf, rebooted and tried but no joy, have since removed again.

Router, DVSwitch client on Android all good.

I haven't tested RF side yet, will do that when I get home.

Any clues why I can't connect to IAX2 please, thanks in advance.

John


Re: Monit: YSFGateway: does not exist

IK7VXC Mike
 

I gave it some time but I also rebooted the RPi. Every process gets green but the YSFGateway.


Re: DVSwitch HAMVOIP #dvs

John EA5JAV/M0JCA
 

Hi Steve,thanks again, DVSwitch part working fine, can now access via USRP so really happy.

For Allstar, I've followed your instructions and ran .firsttime.sh which I found in /usr/local/sbin but my option to check node details etc doesn't work, every time I try to change says "Node Configuration will be run after reboot", even from the main menu.

I looked at /etc/asterisk/iax.conf and notice that [IAXCLIENT] is not there, in the backup I took it was, here are the details prior to the change (have chaned my password below for info purposes to xxxxxx)...

[iaxclient]
type=friend
context=iaxclient
auth=md5
secret=xxxxxxx
host=dynamic
disallow=all
allow=slin
allow=ulaw
allow=adpcm
transfer=no
codecpriority=Caller

I did insert this into iax.conf, rebooted and tried but no joy, have since removed again.

Router, DVSwitch client on Android all good.

I haven't tested RF side yet, will do that when I get home.

Any clues why I can't connect to IAX2 please, thanks in advance.

John


Re: Monit: YSFGateway: does not exist

Steve N4IRS
 

Give it time. Will not refresh ight away.

On 1/26/2022 12:30 PM, IK7VXC Mike wrote:
Steve,

this is what I get:

● ysfgateway.service - YSF Gateway Service
   Loaded: loaded (/lib/systemd/system/ysfgateway.service; enabled; vendor preset: enabled)
   Active: inactive (dead) since Wed 2022-01-26 18:27:48 CET; 22s ago
  Process: 6148 ExecStartPre=/bin/sh -c echo "Starting YSFGateway: [`date +%T.%3N`]" >> /var/log/netcheck (code=exited, status=0/SUCCESS)
  Process: 6152 ExecStart=/opt/YSFGateway/YSFGateway /opt/YSFGateway/YSFGateway.ini (code=exited, status=0/SUCCESS)
 Main PID: 6152 (code=exited, status=0/SUCCESS)
    Tasks: 0 (limit: 3720)
   CGroup: /system.slice/ysfgateway.service
 
Jan 26 18:27:48 echozero systemd[1]: Starting YSF Gateway Service...
Jan 26 18:27:48 echozero systemd[1]: Started YSF Gateway Service.
Jan 26 18:27:48 echozero systemd[1]: ysfgateway.service: Succeeded.

I also did the systemctl start ysfgateway to start service

but Monit keeps saying "does not exist"

Mike IK7VXC


Re: Monit: YSFGateway: does not exist

IK7VXC Mike
 

Steve,

this is what I get:

● ysfgateway.service - YSF Gateway Service
   Loaded: loaded (/lib/systemd/system/ysfgateway.service; enabled; vendor preset: enabled)
   Active: inactive (dead) since Wed 2022-01-26 18:27:48 CET; 22s ago
  Process: 6148 ExecStartPre=/bin/sh -c echo "Starting YSFGateway: [`date +%T.%3N`]" >> /var/log/netcheck (code=exited, status=0/SUCCESS)
  Process: 6152 ExecStart=/opt/YSFGateway/YSFGateway /opt/YSFGateway/YSFGateway.ini (code=exited, status=0/SUCCESS)
 Main PID: 6152 (code=exited, status=0/SUCCESS)
    Tasks: 0 (limit: 3720)
   CGroup: /system.slice/ysfgateway.service
 
Jan 26 18:27:48 echozero systemd[1]: Starting YSF Gateway Service...
Jan 26 18:27:48 echozero systemd[1]: Started YSF Gateway Service.
Jan 26 18:27:48 echozero systemd[1]: ysfgateway.service: Succeeded.

I also did the systemctl start ysfgateway to start service

but Monit keeps saying "does not exist"

Mike IK7VXC


Re: Monit: YSFGateway: does not exist

Steve N4IRS
 

Monit is monitoring the YSFGateway service. My guess is the service is not running. If it not running, you can not dial a YSF reflector with a number 812345 You can connect to a ysf reflector by IP or FQDN.
systemctl status ysfgateway to check if the service is running
systemctl start ysfgateway to start service

On 1/26/2022 12:21 PM, IK7VXC Mike wrote:
Hi Steve,
I don't know what happened but today when I opened the Monit dashboard I noticed that the YSFGateway process "does not exist".
However I don't seem to have any noticeable anomalies and under /opt/YSFGateway folder the file YSFGateway IS there (along with YSFGateway.ini).

How can I correct this issue? And if the process does not exist, what anomaly should I get?

Thanks

Mike IK7VXC 


Monit: YSFGateway: does not exist

IK7VXC Mike
 

Hi Steve,
I don't know what happened but today when I opened the Monit dashboard I noticed that the YSFGateway process "does not exist".
However I don't seem to have any noticeable anomalies and under /opt/YSFGateway folder the file YSFGateway IS there (along with YSFGateway.ini).

How can I correct this issue? And if the process does not exist, what anomaly should I get?

Thanks

Mike IK7VXC 


Re: DVSwitch HAMVOIP #dvs

nh6bf
 

Thanks, Steve!!! My Shari does Allstar!  Shari receives DMR!  Shari does Monit!   Next, after I figure out what I have, is to add my ThumbDV and then Shari will rule the world!!!                                                                                                                                                                                                                                                                                                                  


Re: DVSwitch HAMVOIP #dvs

Steve N4IRS
 

See /etc/monitrc Line 154

On 1/26/2022 9:55 AM, nh6bf via groups.io wrote:
Thanks... got my dvswitch dashboard up!
What's interesting is the "Monit."  Entered the ip:2812, came up with the log in/password box, and trying the stuff in iax.rpt.  no luck!!  Any clues to the log in stanza?


Re: DVSwitch HAMVOIP #dvs

Steve N4IRS
 

correction:
admin monit

On 1/26/2022 9:55 AM, nh6bf via groups.io wrote:
Thanks... got my dvswitch dashboard up!
What's interesting is the "Monit."  Entered the ip:2812, came up with the log in/password box, and trying the stuff in iax.rpt.  no luck!!  Any clues to the log in stanza?


Re: DVSwitch HAMVOIP #dvs

Steve N4IRS
 

admin admin

On 1/26/2022 9:55 AM, nh6bf via groups.io wrote:
Thanks... got my dvswitch dashboard up!
What's interesting is the "Monit."  Entered the ip:2812, came up with the log in/password box, and trying the stuff in iax.rpt.  no luck!!  Any clues to the log in stanza?


Re: DVSwitch HAMVOIP #dvs

nh6bf
 

Thanks... got my dvswitch dashboard up!
What's interesting is the "Monit."  Entered the ip:2812, came up with the log in/password box, and trying the stuff in iax.rpt.  no luck!!  Any clues to the log in stanza?


Re: Interface Icom D-Star repeater to DVSwitch?

Kevin
 

Has anyone experienced setting up the PI-Star G3 Gateway using a Raspberry Pi  for the gateway using ircDDBGateway??

Have a new repeater with the ID RP2C repeater controller and wanting to setup a Gateway.!!

73's
Thanks
Kevin


Re: DVSwitch HAMVOIP #dvs

John EA5JAV/M0JCA
 

Thank you Steve, I'll give this a go, appreciate your advice, will let you know how I get on. John 


Re: Pi W2

Chris Viningre
 

I turned the turbo on and it help. I'll see how it goes for the long run. 


On Tue, Jan 25, 2022, 6:50 AM Stefsan <dl1esz@...> wrote:
ok here the print screnn


Re: DVSwitch HAMVOIP #dvs

Steve N4IRS
 

John,
OK, here is what I suggest:
Make sure your system is up to date.
Make a backup copy of your HamVoIP SD card. Make sure both copies work.
Go to the bash shell from the menu.
cd /
wget http://dvswitch.org/hamvoip
chmod +x hamvoip
./hamvoip
reboot

Start Bash shell interface
/usr/local/dvs/dvs
Do basic setup of DVSwitch

now run the firsttime.sh keep all your existing settings and add a IAX password for use with DVSwitch Mobile

You are set. DVSwitch-Server is connected to your private node 1999
The DVSwitch dashboard is at http://your.node.ip.address/dvswitch
Monit is at http://your.node.ip.address:2812

If you get a error, STOP and ask.

Steve N4IRS

On 1/25/2022 12:51 PM, John-EA5JAV wrote:
Hi Steve, that's exactly it, I have a MicroHub (HAMVOIP) on Allstar only that I obtained from Peter G7RPG a number of years ago, and I would like to access all other digital modes via the DVSwitch Client (Android) and ideally via RF too if possible.
John, EA5JAV/M0JCA 


Re: DVSwitch HAMVOIP #dvs

John EA5JAV/M0JCA
 

Hi Steve, that's exactly it, I have a MicroHub (HAMVOIP) on Allstar only that I obtained from Peter G7RPG a number of years ago, and I would like to access all other digital modes via the DVSwitch Client (Android) and ideally via RF too if possible.
John, EA5JAV/M0JCA 

741 - 760 of 10913