Date   

Re: DMR ID System

Glen Bizeau
 

Carter,

This is because I got the data from Hans's JSON dump, which is GDPR compliant. He is suppose to be giving me a special JSON dump that should contain all the data, which I can them update the records. until then, they will have to remain blank. Hopefully this won't be too long.


Glen
VE9GLN


On Sat, May 12, 2018 at 8:17 PM, C Davis <hazmathi@...> wrote:
Glen,

I noticed all the new registrations when they started...3100002 to the latest 3100304 don't have the State information. Either the registration form is not set up correctly to capture this data or the export to the .csv file is not set up correctly.   Can the data base be set up so the capture of data follows the previous format used and an export .csv file can be created to follow the cBridge import for the radio ID and peer format?

Thank you to everyone for taking the time to make adjustments for the tremendous increase of interest in the digital world and the need for an ID database.

Carter, KH6FV

On Sat, May 12, 2018 at 12:30 PM, Glen Bizeau <gbizeau@...> wrote:
Do to some complication, we switch the ID system again, I now have it running under my own domain https://www.radioid.net I believe you will still be able to get the CSV and jSON files from ham-digital, or you can get them from my site as well.

This is now the permanent home for non-EU (GDPR) data, my data dumps will still contain the stripped down version of 2nnn and 6nnn data following GDPR guidelines.

Glen
VE9GLN




Re: DMR ID System

C Davis
 

Glen,

I noticed all the new registrations when they started...3100002 to the latest 3100304 don't have the State information. Either the registration form is not set up correctly to capture this data or the export to the .csv file is not set up correctly.   Can the data base be set up so the capture of data follows the previous format used and an export .csv file can be created to follow the cBridge import for the radio ID and peer format?

Thank you to everyone for taking the time to make adjustments for the tremendous increase of interest in the digital world and the need for an ID database.

Carter, KH6FV

On Sat, May 12, 2018 at 12:30 PM, Glen Bizeau <gbizeau@...> wrote:
Do to some complication, we switch the ID system again, I now have it running under my own domain https://www.radioid.net I believe you will still be able to get the CSV and jSON files from ham-digital, or you can get them from my site as well.

This is now the permanent home for non-EU (GDPR) data, my data dumps will still contain the stripped down version of 2nnn and 6nnn data following GDPR guidelines.

Glen
VE9GLN



DMR ID System

Glen Bizeau
 

Do to some complication, we switch the ID system again, I now have it running under my own domain https://www.radioid.net I believe you will still be able to get the CSV and jSON files from ham-digital, or you can get them from my site as well.

This is now the permanent home for non-EU (GDPR) data, my data dumps will still contain the stripped down version of 2nnn and 6nnn data following GDPR guidelines.

Glen
VE9GLN


p25 & nxdn reflector

James Riley kb9tzq
 

i just wanted to see if i downloaded and set this up right before i start them can anyone help kb9tzq@...


Re: Brandmeister Login

Steve N4IRS
 

JB,
MMDVM_Bridge can login to BM. You would configure it just like you would MMDVMHost for BM. You may be getting socket errors of HB_Bridge is running at the same time.

Hope this helps,
73, Steve N4IRS

On 05/10/2018 06:16 PM, Jay wrote:
Some guidance please.  I have partial setup where Brandmeister login is accomplished by HB_Bridge and it is passing traffic.  Looking at MMDVM_Bridge.ini, it has a entry DMR Password, so I am wondering if MMDVM_Bridge can log into Brandmeister and I can eliminate HB_Bridge.  So far all may attempt at configuring it end up with socket errors.  Am I off base and do I need to go back to HB_Bridge and include it in the chain??  Part of my confusing is the dvswitch.ini and MMDVM_Bridge.ini seem to work together (or against in my case) each other.  I admit I do not yet have a clear understanding of ins and outs of some of the modules (i.e. Partners).

--

jb   N4NQY


Brandmeister Login

Jay
 

Some guidance please.  I have partial setup where Brandmeister login is accomplished by HB_Bridge and it is passing traffic.  Looking at MMDVM_Bridge.ini, it has a entry DMR Password, so I am wondering if MMDVM_Bridge can log into Brandmeister and I can eliminate HB_Bridge.  So far all may attempt at configuring it end up with socket errors.  Am I off base and do I need to go back to HB_Bridge and include it in the chain??  Part of my confusing is the dvswitch.ini and MMDVM_Bridge.ini seem to work together (or against in my case) each other.  I admit I do not yet have a clear understanding of ins and outs of some of the modules (i.e. Partners).

--

jb   N4NQY


Re: Call routing cluster

Petr Frank, OK2ZAR
 

It's HBlink.


Re: Call routing cluster

Corey Dean N3FE <n3fe@...>
 

I am assuming the confbridge.  Is this dmrlink or hblink?


On May 10, 2018, at 11:35 AM, Petr Frank, OK2ZAR <iogroups@...> wrote:

[Edited Message Follows]

Hi guys,

some time passed and i'm back with questions :-) I spent some time, played a lot and had a lot of fun. But still don't know how to assign repeater to particular "cluster". I've done a diagram since one picture says more than thousand words.<TG_routing.png>
It means that when somebody is using TG 11 then just repeaters 2301, 2302, 2306 are active and transmitting. Rest of repeaters are in idle. The same scenario for another groups - TG 12 activates just 2304, 2305, 2306; TG 14 activates 2302, 2305, 2308 and TG 1 activates all repeaters.

73 de Petr, OK2ZAR.


Re: Call routing cluster

Petr Frank, OK2ZAR
 
Edited

Hi guys,

some time passed and i'm back with questions :-) I spent some time, played a lot and had a lot of fun. But still don't know how to assign repeater to particular "cluster". I've done a diagram since one picture says more than thousand words.
It means that when somebody is using TG 11 then just repeaters 2301, 2302, 2306 are active and transmitting. Rest of repeaters are in idle. The same scenario for another groups - TG 12 activates just 2304, 2305, 2306; TG 14 activates 2302, 2305, 2308 and TG 1 activates all repeaters.

73 de Petr, OK2ZAR.


Re: BrandMeister to XLX

EA5GVK Joaquin
 

Ok, perfect, but yes i connect a server HBLINK, how can select only one tg parcitular?
It very important, can available select all traffic or only one or two tg from mmdvm_bridge.
Many thx Steve.
Congratulations for great work.


Re: BrandMeister to XLX

Steve N4IRS
 

You can control the traffic from BM with the selfcare account for that Repeater ID / Callsign.

On 05/10/2018 10:43 AM, ea5gvk@... wrote:
Ok, perfect, many thx.
I will do tests with DMRGateway to see if it works. And I inform him.

It would be a great advance that from MMDVM_Bridge we have the option of passing all the connection traffic bm or being able to select ONLY the Traffic of a TG in particular.



Re: BrandMeister to XLX

EA5GVK Joaquin
 

Ok, perfect, many thx.
I will do tests with DMRGateway to see if it works. And I inform him.

It would be a great advance that from MMDVM_Bridge we have the option of passing all the connection traffic bm or being able to select ONLY the Traffic of a TG in particular.


Re: BrandMeister to XLX

Steve N4IRS
 

We can look at it but for now, use DMRGateway with MMDVM_Bridge.

On 05/10/2018 10:38 AM, ea5gvk@... wrote:
Yes information it in https://github.com/g4klx/DMRGateway/blob/master/DMRGateway.ini
The idea is

MMDVM_Bridge (connect BM can Select TG for example 21461) <-> MMDVM_Bridge1 (connect XLX 051 Room G for example).
But for all it, any need add DMRGateway.
Need MMDVM_Bridge have available select TG de BM and available connect XLX to Room Specific.


Re: BrandMeister to XLX

EA5GVK Joaquin
 

Yes information it in https://github.com/g4klx/DMRGateway/blob/master/DMRGateway.ini
The idea is

MMDVM_Bridge (connect BM can Select TG for example 21461) <-> MMDVM_Bridge1 (connect XLX 051 Room G for example).
But for all it, any need add DMRGateway.
Need MMDVM_Bridge have available select TG de BM and available connect XLX to Room Specific.


Re: BrandMeister to XLX

Steve N4IRS
 

I moved this discussion to the topic "

BrandMeister to XLX"


Re: BrandMeister to XLX

EA5GVK Joaquin
 

 also if you could add selection option in the section of DMR, DVSwicth.ini, Select the TG you want to bridge.
This would be magnificent.


Re: BrandMeister to XLX

Steve N4IRS
 

My first guess is you will need to add DMRGateway. MMDVM_Bridge will connect to a server exactly like MMDVMHost, so if you can do it with MMDVMHost, you can do it with MMDVM_Bridge.
Is there information on how to connect to a XLX room with DMRGateway available?

Steve N4IRS

On 05/10/2018 10:28 AM, ea5gvk@... wrote:
With MMDVM, I have to connect through DMRGateway.

But yes, MMDVM_Bridge available functions automatic select Inicital Room, it is fine.


Re: BrandMeister to XLX

EA5GVK Joaquin
 

With MMDVM, I have to connect through DMRGateway.

But yes, MMDVM_Bridge available functions automatic select Inicital Room, it is fine.


Re: BrandMeister to XLX

Steve N4IRS
 

How would you do it with a MMDVM?


On 05/10/2018 10:24 AM, ea5gvk@... wrote:
Ok, but for connect a XLX, need Initial Room Select? How do it?


Re: BrandMeister to XLX

EA5GVK Joaquin
 

Ok, but for connect a XLX, need Initial Room Select? How do it?

8621 - 8640 of 9820