Date   

Brandmeister Login

Jay
 

Some guidance please.  I have partial setup where Brandmeister login is accomplished by HB_Bridge and it is passing traffic.  Looking at MMDVM_Bridge.ini, it has a entry DMR Password, so I am wondering if MMDVM_Bridge can log into Brandmeister and I can eliminate HB_Bridge.  So far all may attempt at configuring it end up with socket errors.  Am I off base and do I need to go back to HB_Bridge and include it in the chain??  Part of my confusing is the dvswitch.ini and MMDVM_Bridge.ini seem to work together (or against in my case) each other.  I admit I do not yet have a clear understanding of ins and outs of some of the modules (i.e. Partners).

--

jb   N4NQY


Re: Call routing cluster

Petr Frank, OK2ZAR
 

It's HBlink.


Re: Call routing cluster

Corey Dean N3FE <n3fe@...>
 

I am assuming the confbridge.  Is this dmrlink or hblink?


On May 10, 2018, at 11:35 AM, Petr Frank, OK2ZAR <iogroups@...> wrote:

[Edited Message Follows]

Hi guys,

some time passed and i'm back with questions :-) I spent some time, played a lot and had a lot of fun. But still don't know how to assign repeater to particular "cluster". I've done a diagram since one picture says more than thousand words.<TG_routing.png>
It means that when somebody is using TG 11 then just repeaters 2301, 2302, 2306 are active and transmitting. Rest of repeaters are in idle. The same scenario for another groups - TG 12 activates just 2304, 2305, 2306; TG 14 activates 2302, 2305, 2308 and TG 1 activates all repeaters.

73 de Petr, OK2ZAR.


Re: Call routing cluster

Petr Frank, OK2ZAR
 
Edited

Hi guys,

some time passed and i'm back with questions :-) I spent some time, played a lot and had a lot of fun. But still don't know how to assign repeater to particular "cluster". I've done a diagram since one picture says more than thousand words.
It means that when somebody is using TG 11 then just repeaters 2301, 2302, 2306 are active and transmitting. Rest of repeaters are in idle. The same scenario for another groups - TG 12 activates just 2304, 2305, 2306; TG 14 activates 2302, 2305, 2308 and TG 1 activates all repeaters.

73 de Petr, OK2ZAR.


Re: BrandMeister to XLX

EA5GVK Joaquin
 

Ok, perfect, but yes i connect a server HBLINK, how can select only one tg parcitular?
It very important, can available select all traffic or only one or two tg from mmdvm_bridge.
Many thx Steve.
Congratulations for great work.


Re: BrandMeister to XLX

Steve N4IRS
 

You can control the traffic from BM with the selfcare account for that Repeater ID / Callsign.

On 05/10/2018 10:43 AM, ea5gvk@... wrote:
Ok, perfect, many thx.
I will do tests with DMRGateway to see if it works. And I inform him.

It would be a great advance that from MMDVM_Bridge we have the option of passing all the connection traffic bm or being able to select ONLY the Traffic of a TG in particular.



Re: BrandMeister to XLX

EA5GVK Joaquin
 

Ok, perfect, many thx.
I will do tests with DMRGateway to see if it works. And I inform him.

It would be a great advance that from MMDVM_Bridge we have the option of passing all the connection traffic bm or being able to select ONLY the Traffic of a TG in particular.


Re: BrandMeister to XLX

Steve N4IRS
 

We can look at it but for now, use DMRGateway with MMDVM_Bridge.

On 05/10/2018 10:38 AM, ea5gvk@... wrote:
Yes information it in https://github.com/g4klx/DMRGateway/blob/master/DMRGateway.ini
The idea is

MMDVM_Bridge (connect BM can Select TG for example 21461) <-> MMDVM_Bridge1 (connect XLX 051 Room G for example).
But for all it, any need add DMRGateway.
Need MMDVM_Bridge have available select TG de BM and available connect XLX to Room Specific.


Re: BrandMeister to XLX

EA5GVK Joaquin
 

Yes information it in https://github.com/g4klx/DMRGateway/blob/master/DMRGateway.ini
The idea is

MMDVM_Bridge (connect BM can Select TG for example 21461) <-> MMDVM_Bridge1 (connect XLX 051 Room G for example).
But for all it, any need add DMRGateway.
Need MMDVM_Bridge have available select TG de BM and available connect XLX to Room Specific.


Re: BrandMeister to XLX

Steve N4IRS
 

I moved this discussion to the topic "

BrandMeister to XLX"


Re: BrandMeister to XLX

EA5GVK Joaquin
 

 also if you could add selection option in the section of DMR, DVSwicth.ini, Select the TG you want to bridge.
This would be magnificent.


Re: BrandMeister to XLX

Steve N4IRS
 

My first guess is you will need to add DMRGateway. MMDVM_Bridge will connect to a server exactly like MMDVMHost, so if you can do it with MMDVMHost, you can do it with MMDVM_Bridge.
Is there information on how to connect to a XLX room with DMRGateway available?

Steve N4IRS

On 05/10/2018 10:28 AM, ea5gvk@... wrote:
With MMDVM, I have to connect through DMRGateway.

But yes, MMDVM_Bridge available functions automatic select Inicital Room, it is fine.


Re: BrandMeister to XLX

EA5GVK Joaquin
 

With MMDVM, I have to connect through DMRGateway.

But yes, MMDVM_Bridge available functions automatic select Inicital Room, it is fine.


Re: BrandMeister to XLX

Steve N4IRS
 

How would you do it with a MMDVM?


On 05/10/2018 10:24 AM, ea5gvk@... wrote:
Ok, but for connect a XLX, need Initial Room Select? How do it?


Re: BrandMeister to XLX

EA5GVK Joaquin
 

Ok, but for connect a XLX, need Initial Room Select? How do it?


Re: BrandMeister to XLX

Steve N4IRS
 

Yes, it's possible to do this. It would take 2 instances of MMDVM_Bridge. One connected to BM and the second connected to XLX. Each MMDVM_Bridge would need to be in a separate directory so that each MMDVM_Bridge would have a local copy of DVSwitch.ini and MMDVM_Bridge.ini

As always, buld from the outside in. Connect the first MMDVM_Bridge to BM. Make sure it's logging in properly and receiving data from BM. The connect the second MMDVM_Bridge to XLX. Make sure it's logging in and receiving data.

Point the DMR TX and RX port at the XLX RX and TX ports. Traffic should pass from XLX to BM. Run each program in the foreground so you can watch waht is happening.

73, Steve N4IRS
  

On 05/10/2018 10:12 AM, ea5gvk@... wrote:
How can I bridge a TG xxx DMR from Brandmeister to a Reflector XLX xxx Room X DMR?
please.
Would there be any way to incorporate this possibility in the MMDVM_Bridge?
Thank you.


BrandMeister to XLX

EA5GVK Joaquin
 

How can I bridge a TG xxx DMR from Brandmeister to a Reflector XLX xxx Room X DMR?
please.
Would there be any way to incorporate this possibility in the MMDVM_Bridge?
Thank you.


Re: Eight days 'til Dayton

Steve N4IRS
 

Thanks Jeff,
We certainly plan you join you again next year with who knows what toys.

You can have my share of fun!

Steve


Updated DVSwitch repository available

Steve N4IRS
 
Edited

I have made some changes to the DVSwitch repositories, to better align naming and distributions. The packages are:
1: Available for ARM, i386 and AMD64
2: ARM and i386 will run on Jessie and Stretch
3: AMD64 will run on Debian Stretch AMD64 and Ubuntu AMD64
3: All packages will be in the stretch repository

The available packages are:
dvswitch_base, Analog_Bridge, md380-emu, MMDVM_Bridge, P25Gateway, P25Parrot.

The metapackages are named dvswitch and quantar.

dvswitch contains:
dvswitch_base, Analog_Bridge, md380-emu and MMDVM_Bridge

quantar contains:
dvswitch_base, MMDVM_Bridge, Quantar_Bridge P25Gateway, P25Parrot

After installing the repository, you can install either dvswitch or quantar or both

I hope this make sense and will make things easier for people.

To install the repository:
As root
cd /tmp

wget http://dvswitch.org/install-dvswitch-repo
chmod +x install-dvswitch-repo
./install-dvswitch-repo
 apt-get update

73, Steve N4IRS


Re: Alpha test of new DVSwitch programs available.

Steven Blackford
 

Sure, I’m good on QRZ.   😊

 

Steve, K4SQI

 

From: James Riley kb9tzq
Sent: Wednesday, May 9, 2018 12:40 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] Alpha test of new DVSwitch programs available.

 

steven blackford is it ok if i email you and if so is it good on qrz

 

8601 - 8620 of 9795