Date   

Re: I have missed some major step on install

 

Awesome, glad you found my guide helpful, like I said, it doesn't cover everything but it covered what I did. :)


On Fri, Jun 1, 2018 at 9:18 AM Chris via Groups.Io <chood73=yahoo.com@groups.io> wrote:
Thank you very much!

Haha, while I was going back and forth with you, I found a step by step by a guy that is doing exactly what I want to do. I am going to parse through his stuff and see if I can get it finished up.

His link is here: https://kv4s.com/2018/05/23/hosting-an-allstar-node-and-an-allstardmr-bridge-in-the-cloud/

Thank you SO MUCH for what you guys are doing!

I currently have DMR, Analog, C4FM and Allstar connected to my repeaters, but am using some hardware solutions in there. The work that you guys have done is going to make my system SOOOO much more stream lined.

Thanks again!
Chris
WB4ULK


Re: I have missed some major step on install

Steve N4IRS
 

It should already be enabled it's systemctl (not a 1) status md380-emu will show you if it's running.

systemctl enable xxxx sets up xxxx to start at boot.
systemctl status xxxx shows current status
systemctl start xxxx starts xxxx
systemctl stop xxxx Well, you guess....

On 6/1/2018 10:52 AM, Chris via Groups.Io wrote:
Looks Like I have everything configured.

When I try issuing the systemct1 enable md380-emu

It says command not found, do I need to be in a particular directory?

Chris


Re: I have missed some major step on install

Chris WB4ULK
 

Nevermind. It's systemct(L) not 1. lol


Re: I have missed some major step on install

Chris WB4ULK
 

Looks Like I have everything configured.

When I try issuing the systemct1 enable md380-emu

It says command not found, do I need to be in a particular directory?

Chris


Re: I have missed some major step on install

Chris WB4ULK
 

Thanks,

I got everything installed and I was going to look at his guide for the configuration.

I am currently looking at the Analog_Bridge.ini

That was a major accomplishment. LOL

Thanks,
Chris


Re: I have missed some major step on install

WillieB <will@...>
 

Hi Chris,

 

Since you are using the ASL image in which ASL is already installed, be sure to skip the ASL section in Russell’s guide…

 

-Will

KE4IAJ

 

From: main@DVSwitch.groups.io [mailto:main@DVSwitch.groups.io] On Behalf Of Chris via Groups.Io
Sent: Friday, June 1, 2018 10:18 AM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] I have missed some major step on install

 

Thank you very much!

Haha, while I was going back and forth with you, I found a step by step by a guy that is doing exactly what I want to do. I am going to parse through his stuff and see if I can get it finished up.

His link is here: https://kv4s.com/2018/05/23/hosting-an-allstar-node-and-an-allstardmr-bridge-in-the-cloud/

Thank you SO MUCH for what you guys are doing!

I currently have DMR, Analog, C4FM and Allstar connected to my repeaters, but am using some hardware solutions in there. The work that you guys have done is going to make my system SOOOO much more stream lined.

Thanks again!
Chris
WB4ULK


Re: I have missed some major step on install

Chris WB4ULK
 

Thank you very much!

Haha, while I was going back and forth with you, I found a step by step by a guy that is doing exactly what I want to do. I am going to parse through his stuff and see if I can get it finished up.

His link is here: https://kv4s.com/2018/05/23/hosting-an-allstar-node-and-an-allstardmr-bridge-in-the-cloud/

Thank you SO MUCH for what you guys are doing!

I currently have DMR, Analog, C4FM and Allstar connected to my repeaters, but am using some hardware solutions in there. The work that you guys have done is going to make my system SOOOO much more stream lined.

Thanks again!
Chris
WB4ULK


Re: I have missed some major step on install

Steve N4IRS
 

Yes, You installed the repository. As root (or sudo -s) apt-get install dvswitch

On 6/1/2018 10:07 AM, Chris via Groups.Io wrote:
I didn't "Install" anything other than the repository. HAHA, that might explain things.
I am a wee bit ignorant in Linux.

So when I followed the instructions in that quoted post, it just installed the repository?

Then I need to "apt-get install dvswitch" ?

Am I tracking?

Thanks for the quick response by the way.

Chris


Re: I have missed some major step on install

Chris WB4ULK
 

I didn't "Install" anything other than the repository. HAHA, that might explain things.
I am a wee bit ignorant in Linux.

So when I followed the instructions in that quoted post, it just installed the repository?

Then I need to "apt-get install dvswitch" ?

Am I tracking?

Thanks for the quick response by the way.

Chris


Re: I have missed some major step on install

Steve N4IRS
 

Chris,
Once you installed the repository, what application did you install? "apt-get install dvswitch" ?

Steve

On 6/1/2018 9:54 AM, Chris via Groups.Io wrote:
Hi,
I am trying to get DVSwitch installed on my Debian virtual Server.

I have The ISO from ASL installed and it is working fine.

I followed the instructions from here
https://dvswitch.groups.io/g/main/topic/updated_dvswitch_repository/18971786?p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20,2,0,18971786

and installed the repository. Everything looked as though it installed correctly.
However, when I go look in the OPT folder I can’t find any .ini files.

I have searched high and low through all my directories.

Is there another step to install after the instructions I followed on the above mentioned link?

I have searched the threads for this info, but am afraid I am to ignorant to know WHAT to search for.

Thanks,
Chris
WB4ULK


I have missed some major step on install

Chris WB4ULK
 

Hi,
I am trying to get DVSwitch installed on my Debian virtual Server.

I have The ISO from ASL installed and it is working fine.

I followed the instructions from here
https://dvswitch.groups.io/g/main/topic/updated_dvswitch_repository/18971786?p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20,2,0,18971786

and installed the repository. Everything looked as though it installed correctly.
However, when I go look in the OPT folder I can’t find any .ini files.

I have searched high and low through all my directories.

Is there another step to install after the instructions I followed on the above mentioned link?

I have searched the threads for this info, but am afraid I am to ignorant to know WHAT to search for.

Thanks,
Chris
WB4ULK


Re: New ASL / Echolink <> DMR Gateway up!

Steve N4IRS
 

No, not at this time.

On 05/31/2018 07:27 PM, Roselito de los Reyes wrote:
Hi Steve,

Is there any way to translate the ASL Node ID transmitting -> person's callsign -> DMR ID?

73,

Lito

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Thursday, May 31, 2018 4:23 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] New ASL / Echolink <> DMR Gateway up!
 
Jon,
The gatewayDmrId value is what appears as the station on BM. Since ASL has no Metadata, there is now real way to extract the real transmitting station.

73, Steve

On 05/31/2018 07:18 PM, jon@... wrote:
Hey, thanks to all of you who posted your configs. 

I've now got a bridge up and running on the following:

BM TG 98003 (RedditNet)
ASL 48224
Echolink KM8V-L

And it all works!

One question:

Is there any way to control what callsign appears on Brandmeister, or will everything that comes through the bridge come through with my call?

Thanks & 73 de KM8V



Re: New ASL / Echolink <> DMR Gateway up!

Lito - WI6Y
 

Hi Steve,

Is there any way to translate the ASL Node ID transmitting -> person's callsign -> DMR ID?

73,

Lito


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Thursday, May 31, 2018 4:23 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] New ASL / Echolink <> DMR Gateway up!
 
Jon,
The gatewayDmrId value is what appears as the station on BM. Since ASL has no Metadata, there is now real way to extract the real transmitting station.

73, Steve

On 05/31/2018 07:18 PM, jon@... wrote:
Hey, thanks to all of you who posted your configs. 

I've now got a bridge up and running on the following:

BM TG 98003 (RedditNet)
ASL 48224
Echolink KM8V-L

And it all works!

One question:

Is there any way to control what callsign appears on Brandmeister, or will everything that comes through the bridge come through with my call?

Thanks & 73 de KM8V


Re: New ASL / Echolink <> DMR Gateway up!

Steve N4IRS
 

Jon,
The gatewayDmrId value is what appears as the station on BM. Since ASL has no Metadata, there is now real way to extract the real transmitting station.

73, Steve

On 05/31/2018 07:18 PM, jon@... wrote:
Hey, thanks to all of you who posted your configs. 

I've now got a bridge up and running on the following:

BM TG 98003 (RedditNet)
ASL 48224
Echolink KM8V-L

And it all works!

One question:

Is there any way to control what callsign appears on Brandmeister, or will everything that comes through the bridge come through with my call?

Thanks & 73 de KM8V


New ASL / Echolink <> DMR Gateway up!

Jon KM8V
 

Hey, thanks to all of you who posted your configs. 

I've now got a bridge up and running on the following:

BM TG 98003 (RedditNet)
ASL 48224
Echolink KM8V-L

And it all works!

One question:

Is there any way to control what callsign appears on Brandmeister, or will everything that comes through the bridge come through with my call?

Thanks & 73 de KM8V


Re: Explanation of ports and TG on one machine

Lito - WI6Y
 

Thank you for the clarification. I think the bleed over could be caused by some other experimenter other than me.

Lito


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Thursday, May 31, 2018 4:10 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] Explanation of ports and TG on one machine
 
As long as the local port are different you should be fine. You may want to log into different servers also.

On 05/31/2018 07:07 PM, Roselito de los Reyes wrote:
Hi Steve,

If I had two instances of the MMDVM_Bridge serving two different TG's, is there a possibility of a bleed over the two services? This is happening with my setup and all other ports have are all different.

Lito

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Thursday, May 31, 2018 4:05 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] Explanation of ports and TG on one machine
 
62031 is the port used to log into BrandMeister. That is fixed.

On 05/31/2018 06:59 PM, Roselito de los Reyes wrote:
Is that also true for the DMR Network Stanza 
port? I tried to change it to 62030 and it times out.

M: 2018-05-31 22:56:40.270 MMDVM_Bridge-20180423 is running
I: 2018-05-31 22:56:40.270 Started the DMR Id lookup reload thread
E: 2018-05-31 22:57:50.273 DMR, Connection to the master has timed out, retrying connection
M: 2018-05-31 22:57:50.273 DMR, Closing DMR Network
M: 2018-05-31 22:57:50.273 DMR, Opening DMR Network
E: 2018-05-31 22:59:00.281 DMR, Connection to the master has timed out, retrying connection
M: 2018-05-31 22:59:00.281 DMR, Closing DMR Network
M: 2018-05-31 22:59:00.281 DMR, Opening DMR Network


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Thursday, May 31, 2018 10:11 AM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] Explanation of ports and TG on one machine
 
Yes it is. If commented out it will choose random port.

On 5/31/2018 12:51 PM, Roselito de los Reyes wrote:
Hi Steve

The Local port parameter in the System fusion network stanza is that arbitrary? Is the same statement true for port 62031 for the DMR Network Stanza?

Lito WI6Y




Re: Explanation of ports and TG on one machine

Steve N4IRS
 

As long as the local port are different you should be fine. You may want to log into different servers also.

On 05/31/2018 07:07 PM, Roselito de los Reyes wrote:
Hi Steve,

If I had two instances of the MMDVM_Bridge serving two different TG's, is there a possibility of a bleed over the two services? This is happening with my setup and all other ports have are all different.

Lito

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Thursday, May 31, 2018 4:05 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] Explanation of ports and TG on one machine
 
62031 is the port used to log into BrandMeister. That is fixed.

On 05/31/2018 06:59 PM, Roselito de los Reyes wrote:
Is that also true for the DMR Network Stanza 
port? I tried to change it to 62030 and it times out.

M: 2018-05-31 22:56:40.270 MMDVM_Bridge-20180423 is running
I: 2018-05-31 22:56:40.270 Started the DMR Id lookup reload thread
E: 2018-05-31 22:57:50.273 DMR, Connection to the master has timed out, retrying connection
M: 2018-05-31 22:57:50.273 DMR, Closing DMR Network
M: 2018-05-31 22:57:50.273 DMR, Opening DMR Network
E: 2018-05-31 22:59:00.281 DMR, Connection to the master has timed out, retrying connection
M: 2018-05-31 22:59:00.281 DMR, Closing DMR Network
M: 2018-05-31 22:59:00.281 DMR, Opening DMR Network


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Thursday, May 31, 2018 10:11 AM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] Explanation of ports and TG on one machine
 
Yes it is. If commented out it will choose random port.

On 5/31/2018 12:51 PM, Roselito de los Reyes wrote:
Hi Steve

The Local port parameter in the System fusion network stanza is that arbitrary? Is the same statement true for port 62031 for the DMR Network Stanza?

Lito WI6Y




Re: Explanation of ports and TG on one machine

Lito - WI6Y
 

Hi Steve,

If I had two instances of the MMDVM_Bridge serving two different TG's, is there a possibility of a bleed over the two services? This is happening with my setup and all other ports have are all different.

Lito


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Thursday, May 31, 2018 4:05 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] Explanation of ports and TG on one machine
 
62031 is the port used to log into BrandMeister. That is fixed.

On 05/31/2018 06:59 PM, Roselito de los Reyes wrote:
Is that also true for the DMR Network Stanza 
port? I tried to change it to 62030 and it times out.

M: 2018-05-31 22:56:40.270 MMDVM_Bridge-20180423 is running
I: 2018-05-31 22:56:40.270 Started the DMR Id lookup reload thread
E: 2018-05-31 22:57:50.273 DMR, Connection to the master has timed out, retrying connection
M: 2018-05-31 22:57:50.273 DMR, Closing DMR Network
M: 2018-05-31 22:57:50.273 DMR, Opening DMR Network
E: 2018-05-31 22:59:00.281 DMR, Connection to the master has timed out, retrying connection
M: 2018-05-31 22:59:00.281 DMR, Closing DMR Network
M: 2018-05-31 22:59:00.281 DMR, Opening DMR Network


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Thursday, May 31, 2018 10:11 AM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] Explanation of ports and TG on one machine
 
Yes it is. If commented out it will choose random port.

On 5/31/2018 12:51 PM, Roselito de los Reyes wrote:
Hi Steve

The Local port parameter in the System fusion network stanza is that arbitrary? Is the same statement true for port 62031 for the DMR Network Stanza?

Lito WI6Y



Re: Explanation of ports and TG on one machine

Steve N4IRS
 

62031 is the port used to log into BrandMeister. That is fixed.

On 05/31/2018 06:59 PM, Roselito de los Reyes wrote:
Is that also true for the DMR Network Stanza 
port? I tried to change it to 62030 and it times out.

M: 2018-05-31 22:56:40.270 MMDVM_Bridge-20180423 is running
I: 2018-05-31 22:56:40.270 Started the DMR Id lookup reload thread
E: 2018-05-31 22:57:50.273 DMR, Connection to the master has timed out, retrying connection
M: 2018-05-31 22:57:50.273 DMR, Closing DMR Network
M: 2018-05-31 22:57:50.273 DMR, Opening DMR Network
E: 2018-05-31 22:59:00.281 DMR, Connection to the master has timed out, retrying connection
M: 2018-05-31 22:59:00.281 DMR, Closing DMR Network
M: 2018-05-31 22:59:00.281 DMR, Opening DMR Network


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Thursday, May 31, 2018 10:11 AM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] Explanation of ports and TG on one machine
 
Yes it is. If commented out it will choose random port.

On 5/31/2018 12:51 PM, Roselito de los Reyes wrote:
Hi Steve

The Local port parameter in the System fusion network stanza is that arbitrary? Is the same statement true for port 62031 for the DMR Network Stanza?

Lito WI6Y



Re: Explanation of ports and TG on one machine

Lito - WI6Y
 

Is that also true for the DMR Network Stanza 
port? I tried to change it to 62030 and it times out.

M: 2018-05-31 22:56:40.270 MMDVM_Bridge-20180423 is running
I: 2018-05-31 22:56:40.270 Started the DMR Id lookup reload thread
E: 2018-05-31 22:57:50.273 DMR, Connection to the master has timed out, retrying connection
M: 2018-05-31 22:57:50.273 DMR, Closing DMR Network
M: 2018-05-31 22:57:50.273 DMR, Opening DMR Network
E: 2018-05-31 22:59:00.281 DMR, Connection to the master has timed out, retrying connection
M: 2018-05-31 22:59:00.281 DMR, Closing DMR Network
M: 2018-05-31 22:59:00.281 DMR, Opening DMR Network


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Thursday, May 31, 2018 10:11 AM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] Explanation of ports and TG on one machine
 
Yes it is. If commented out it will choose random port.

On 5/31/2018 12:51 PM, Roselito de los Reyes wrote:
Hi Steve

The Local port parameter in the System fusion network stanza is that arbitrary? Is the same statement true for port 62031 for the DMR Network Stanza?

Lito WI6Y

8741 - 8760 of 10139