Date   

Hbmonitor problem

Valentino
 

Hello guys, just finish to instal HBlink with HBmonitor and really runing well in my local ip, is fantastic and i do also some qso. But  i have a problem...

Out, at this link http://hblink.dynu.net:8081 is possible see a home page and not more, when you are connections here i read a messagge: Connection closed (wasclean = false, code = 1006, reason = '')

but in my local machine i read and see all.


 Pic nº 2


Well  but out  is not possible see all data, always error Connection closed (wasclean = false, code = 1006, reason = '')

If some friend know a problem  i need your help. Many thanks a lot and my best 73 - EA1HNC - Valentino


Re: New Set Up MMDVM to IPSC

Steve N4IRS
 

It can run on the same host as MMDVM_Host.


Re: New Set Up MMDVM to IPSC

Dutch Drahtlos
 

HB_Bridge and IPSC_Bridge is in same raspberry with mmdvm or different hardware?


Re: NXDNReflector with DVSwitch

JJ Cummings
 

I think that it works well, I need to adjust levels to get the audio a bit cleaner <-> ASL, of course I suspect there is only so much that can be done when emulating, but for emulation it’s decent.   I’d love to help out with dev when I have time but I’m swamped now with ASL work and real life pay the bills work.  

Sent from the iRoad

On Dec 14, 2018, at 17:47, Steve N4IRS <szingman@...> wrote:

Who da thunk it.
Yes, NXDN, D-Star and P25 REQUIRE a gateway.
DMR does not need one.
YSF can use one and it does bring features to the table.

Mike and I have discussed removing the need for P25 and maybe NXDN. We have not decided yet.

Glad I was able to help you get it going.

Steve N4IRS

On 12/14/18 5:20 PM, JJ Cummings wrote:
You are correct sir... I had to undo all of the things that I had monkeyed with to try and make it work before and now it works perfectly!

On Fri, Dec 14, 2018 at 7:50 AM Steve N4IRS <szingman@...> wrote:
If I remember, the defaults in MMDVM_Bridge.ini and the defaults in NXDN_Gateway match up fine.

On 12/14/2018 9:36 AM, JJ Cummings wrote:
So how do I tie NXDNGateway into DVSwitch, I don't even see packets sourcing from DVSwitch toward anything... I'll try it with NXDNGateway in between such as follows and see what happens:

NXDNReflector <-> NXDNGateway <-> DVSwitch etc....

On Fri, Dec 14, 2018 at 7:28 AM Steve N4IRS <szingman@...> wrote:
OK,
Yes it works with YSF. No it does not work with NXDN. You need NXDNGateway.

On 12/14/2018 9:09 AM, JJ Cummings wrote:
I am not, I’m doing what I have with YSFReflector that works.. so 

NXDNReflector <-> DVSwitch <-> Analog_Bridge

Where DVSwitch of course makes the outbound connections to either side etc..

Sent from the iRoad

On Dec 13, 2018, at 23:47, Steve N4IRS <szingman@...> wrote:

Are you running NXDNGateway?




Re: YSF to P25 always return fallbackID

Steve N4IRS
 

Yes,
I plan to consolidate the scripts. Good to hear things are working.

Steve

On 12/14/18 10:08 PM, lazy walker wrote:
I was using the script from
https://github.com/DVSwitch/DVSwitch-System-Builder/blob/master/Directories/usr/local/sbin/DMRIDUpdateBM.sh,
it pulled IDs from radioed.net

$/etc/cron.daily# vi DMRIDUpdateBM
# Generate new file
curl 'https://www.radioid.net/static/users.csv' 2>/dev/null | sed -e
's/[[:space:]]\+/ /g' > ${DMRIDFILE}

the format of this Id file is
$ head /var/lib/mmdvm/DMRIds.dat
Radio ID,Callsign,Name,City,State,Country,Remarks
1023001,VE3THW,Wayne Edward,Toronto,Ontario,Canada,DMR
1023002,VA3ECM,Mathieu Goulet,Ottawa-Hull,Quebec,Canada,CCS7


while the one from http://registry.dstar.su/dmr/DMRIds.php is
# Call ID Call Alias
2 LW1EOI Luis Mario
24001 SM6TKT Claes

there are different.

so i pull off the second one and give it a try, and it works!
may be you should update the script of DVSwitch-System-Builder?

because all service(p25gateway, p25reflector, etc..) are sharing the
same DMRIds, I wonder which format of DMDIds.dat will serve them all.

Tnx


On Sat, Dec 15, 2018 at 9:12 AM Steve N4IRS <szingman@msgstor.com> wrote:
Check the script and make sure it is pulling from here:
<http://registry.dstar.su/dmr/DMRIds.php>

On 12/14/18 8:03 PM, lazy walker wrote:
Yep but i think it’s fresh because the cron job just download it 2 hours ago :)

$ /var/lib/mmdvm# ls -l
total 12704
-rw-r--r-- 1 root root 6348707 Dec 15 06:26 DMRIds.dat
-rw-r--r-- 1 root root 6343785 Dec 15 06:25 DMRIds.dat.151218

On Dec 15, 2018, at 08:57, Steve N4IRS <szingman@msgstor.com> wrote:

Looks right. I will do some local testing this week. You might try to removed the datafile and download a fresh copy.

Steve

On 12/14/18 7:52 PM, lazy walker wrote:
Here is mine >
I: 2018-12-14 16:28:19.781 DMR Id Lookups
I: 2018-12-14 16:28:19.781 File: /var/lib/mmdvm/DMRIds.dat
I: 2018-12-14 16:28:19.781 Reload: 24 hours
I: 2018-12-14 16:28:19.874 Loaded 116072 Ids to the DMR callsign lookup table
I: 2018-12-14 16:28:19.874 YSF RF Parameters

On Sat, Dec 15, 2018 at 8:43 AM Steve N4IRS <szingman@msgstor.com> wrote:
Check when MMDVM_Bridge starts up. You should see this in the log:
I: 2018-12-02 11:33:12.161 DMR Id Lookups
I: 2018-12-02 11:33:12.161 File: /var/lib/mmdvm/DMRIds.dat
I: 2018-12-02 11:33:12.161 Reload: 24 hours
I: 2018-12-02 11:33:12.690 Loaded 117442 Ids to the DMR callsign lookup table
I: 2018-12-02 11:33:12.690 P25 RF Parameters
I: 2018-12-02 11:33:12.690 Started the DMR Id lookup reload thread

I bolded the 2 important entries. Check yours.

Steve N4IRS


On 12/14/18 7:33 PM, lazy walker wrote:

Hi Steve,
Yes i'm pretty sure we have the DmrId.dat file right :

grep BD7MQB /var/lib/mmdvm/DMRIds.dat
4607133,BD7MQB,Michael Changzhi Cai,Shenzhen/Guangdong,Hu Nan Guang
Dong Guang Xi,China,DMR


On Sat, Dec 15, 2018 at 12:18 AM Steve N4IRS <szingman@msgstor.com> wrote:

Please check MMDVM_Bridge.ini for:
[DMR Id Lookup]
File=/var/lib/mmdvm/DMRIds.dat

Make sure that points to a valid ID file
Then make sure it contains a ID:
grep BD7MQB /var/lib/mmdvm/DMRIds.dat

Steve N4IRS

On 12/14/2018 10:37 AM, lazy walker wrote:

I: 2018-12-14 15:27:35.370 YSF, Lookup call BD7MQB returned id 0 -> 1234567








Re: YSF to P25 always return fallbackID

Michael BD7MQB
 

I was using the script from
https://github.com/DVSwitch/DVSwitch-System-Builder/blob/master/Directories/usr/local/sbin/DMRIDUpdateBM.sh,
it pulled IDs from radioed.net

$/etc/cron.daily# vi DMRIDUpdateBM
# Generate new file
curl 'https://www.radioid.net/static/users.csv' 2>/dev/null | sed -e
's/[[:space:]]\+/ /g' > ${DMRIDFILE}

the format of this Id file is
$ head /var/lib/mmdvm/DMRIds.dat
Radio ID,Callsign,Name,City,State,Country,Remarks
1023001,VE3THW,Wayne Edward,Toronto,Ontario,Canada,DMR
1023002,VA3ECM,Mathieu Goulet,Ottawa-Hull,Quebec,Canada,CCS7


while the one from http://registry.dstar.su/dmr/DMRIds.php is
# Call ID Call Alias
2 LW1EOI Luis Mario
24001 SM6TKT Claes

there are different.

so i pull off the second one and give it a try, and it works!
may be you should update the script of DVSwitch-System-Builder?

because all service(p25gateway, p25reflector, etc..) are sharing the
same DMRIds, I wonder which format of DMDIds.dat will serve them all.

Tnx


On Sat, Dec 15, 2018 at 9:12 AM Steve N4IRS <szingman@msgstor.com> wrote:

Check the script and make sure it is pulling from here:
<http://registry.dstar.su/dmr/DMRIds.php>

On 12/14/18 8:03 PM, lazy walker wrote:
Yep but i think it’s fresh because the cron job just download it 2 hours ago :)

$ /var/lib/mmdvm# ls -l
total 12704
-rw-r--r-- 1 root root 6348707 Dec 15 06:26 DMRIds.dat
-rw-r--r-- 1 root root 6343785 Dec 15 06:25 DMRIds.dat.151218

On Dec 15, 2018, at 08:57, Steve N4IRS <szingman@msgstor.com> wrote:

Looks right. I will do some local testing this week. You might try to removed the datafile and download a fresh copy.

Steve

On 12/14/18 7:52 PM, lazy walker wrote:
Here is mine >
I: 2018-12-14 16:28:19.781 DMR Id Lookups
I: 2018-12-14 16:28:19.781 File: /var/lib/mmdvm/DMRIds.dat
I: 2018-12-14 16:28:19.781 Reload: 24 hours
I: 2018-12-14 16:28:19.874 Loaded 116072 Ids to the DMR callsign lookup table
I: 2018-12-14 16:28:19.874 YSF RF Parameters

On Sat, Dec 15, 2018 at 8:43 AM Steve N4IRS <szingman@msgstor.com> wrote:
Check when MMDVM_Bridge starts up. You should see this in the log:
I: 2018-12-02 11:33:12.161 DMR Id Lookups
I: 2018-12-02 11:33:12.161 File: /var/lib/mmdvm/DMRIds.dat
I: 2018-12-02 11:33:12.161 Reload: 24 hours
I: 2018-12-02 11:33:12.690 Loaded 117442 Ids to the DMR callsign lookup table
I: 2018-12-02 11:33:12.690 P25 RF Parameters
I: 2018-12-02 11:33:12.690 Started the DMR Id lookup reload thread

I bolded the 2 important entries. Check yours.

Steve N4IRS


On 12/14/18 7:33 PM, lazy walker wrote:

Hi Steve,
Yes i'm pretty sure we have the DmrId.dat file right :

grep BD7MQB /var/lib/mmdvm/DMRIds.dat
4607133,BD7MQB,Michael Changzhi Cai,Shenzhen/Guangdong,Hu Nan Guang
Dong Guang Xi,China,DMR


On Sat, Dec 15, 2018 at 12:18 AM Steve N4IRS <szingman@msgstor.com> wrote:

Please check MMDVM_Bridge.ini for:
[DMR Id Lookup]
File=/var/lib/mmdvm/DMRIds.dat

Make sure that points to a valid ID file
Then make sure it contains a ID:
grep BD7MQB /var/lib/mmdvm/DMRIds.dat

Steve N4IRS

On 12/14/2018 10:37 AM, lazy walker wrote:

I: 2018-12-14 15:27:35.370 YSF, Lookup call BD7MQB returned id 0 -> 1234567










Re: YSF to P25 always return fallbackID

Steve N4IRS
 

Check the script and make sure it is pulling from here:
<http://registry.dstar.su/dmr/DMRIds.php>

On 12/14/18 8:03 PM, lazy walker wrote:
Yep but i think it’s fresh because the cron job just download it 2 hours ago :)

$ /var/lib/mmdvm# ls -l
total 12704
-rw-r--r-- 1 root root 6348707 Dec 15 06:26 DMRIds.dat
-rw-r--r-- 1 root root 6343785 Dec 15 06:25 DMRIds.dat.151218

On Dec 15, 2018, at 08:57, Steve N4IRS <szingman@msgstor.com> wrote:

Looks right. I will do some local testing this week. You might try to removed the datafile and download a fresh copy.

Steve

On 12/14/18 7:52 PM, lazy walker wrote:
Here is mine >
I: 2018-12-14 16:28:19.781 DMR Id Lookups
I: 2018-12-14 16:28:19.781 File: /var/lib/mmdvm/DMRIds.dat
I: 2018-12-14 16:28:19.781 Reload: 24 hours
I: 2018-12-14 16:28:19.874 Loaded 116072 Ids to the DMR callsign lookup table
I: 2018-12-14 16:28:19.874 YSF RF Parameters

On Sat, Dec 15, 2018 at 8:43 AM Steve N4IRS <szingman@msgstor.com> wrote:
Check when MMDVM_Bridge starts up. You should see this in the log:
I: 2018-12-02 11:33:12.161 DMR Id Lookups
I: 2018-12-02 11:33:12.161 File: /var/lib/mmdvm/DMRIds.dat
I: 2018-12-02 11:33:12.161 Reload: 24 hours
I: 2018-12-02 11:33:12.690 Loaded 117442 Ids to the DMR callsign lookup table
I: 2018-12-02 11:33:12.690 P25 RF Parameters
I: 2018-12-02 11:33:12.690 Started the DMR Id lookup reload thread

I bolded the 2 important entries. Check yours.

Steve N4IRS


On 12/14/18 7:33 PM, lazy walker wrote:

Hi Steve,
Yes i'm pretty sure we have the DmrId.dat file right :

grep BD7MQB /var/lib/mmdvm/DMRIds.dat
4607133,BD7MQB,Michael Changzhi Cai,Shenzhen/Guangdong,Hu Nan Guang
Dong Guang Xi,China,DMR


On Sat, Dec 15, 2018 at 12:18 AM Steve N4IRS <szingman@msgstor.com> wrote:

Please check MMDVM_Bridge.ini for:
[DMR Id Lookup]
File=/var/lib/mmdvm/DMRIds.dat

Make sure that points to a valid ID file
Then make sure it contains a ID:
grep BD7MQB /var/lib/mmdvm/DMRIds.dat

Steve N4IRS

On 12/14/2018 10:37 AM, lazy walker wrote:

I: 2018-12-14 15:27:35.370 YSF, Lookup call BD7MQB returned id 0 -> 1234567







Re: YSF to P25 always return fallbackID

Michael BD7MQB
 

Yep but i think it’s fresh because the cron job just download it 2 hours ago :)

$ /var/lib/mmdvm# ls -l
total 12704
-rw-r--r-- 1 root root 6348707 Dec 15 06:26 DMRIds.dat
-rw-r--r-- 1 root root 6343785 Dec 15 06:25 DMRIds.dat.151218

On Dec 15, 2018, at 08:57, Steve N4IRS <szingman@msgstor.com> wrote:

Looks right. I will do some local testing this week. You might try to removed the datafile and download a fresh copy.

Steve

On 12/14/18 7:52 PM, lazy walker wrote:
Here is mine >
I: 2018-12-14 16:28:19.781 DMR Id Lookups
I: 2018-12-14 16:28:19.781 File: /var/lib/mmdvm/DMRIds.dat
I: 2018-12-14 16:28:19.781 Reload: 24 hours
I: 2018-12-14 16:28:19.874 Loaded 116072 Ids to the DMR callsign lookup table
I: 2018-12-14 16:28:19.874 YSF RF Parameters

On Sat, Dec 15, 2018 at 8:43 AM Steve N4IRS <szingman@msgstor.com> wrote:
Check when MMDVM_Bridge starts up. You should see this in the log:
I: 2018-12-02 11:33:12.161 DMR Id Lookups
I: 2018-12-02 11:33:12.161 File: /var/lib/mmdvm/DMRIds.dat
I: 2018-12-02 11:33:12.161 Reload: 24 hours
I: 2018-12-02 11:33:12.690 Loaded 117442 Ids to the DMR callsign lookup table
I: 2018-12-02 11:33:12.690 P25 RF Parameters
I: 2018-12-02 11:33:12.690 Started the DMR Id lookup reload thread

I bolded the 2 important entries. Check yours.

Steve N4IRS


On 12/14/18 7:33 PM, lazy walker wrote:

Hi Steve,
Yes i'm pretty sure we have the DmrId.dat file right :

grep BD7MQB /var/lib/mmdvm/DMRIds.dat
4607133,BD7MQB,Michael Changzhi Cai,Shenzhen/Guangdong,Hu Nan Guang
Dong Guang Xi,China,DMR


On Sat, Dec 15, 2018 at 12:18 AM Steve N4IRS <szingman@msgstor.com> wrote:

Please check MMDVM_Bridge.ini for:
[DMR Id Lookup]
File=/var/lib/mmdvm/DMRIds.dat

Make sure that points to a valid ID file
Then make sure it contains a ID:
grep BD7MQB /var/lib/mmdvm/DMRIds.dat

Steve N4IRS

On 12/14/2018 10:37 AM, lazy walker wrote:

I: 2018-12-14 15:27:35.370 YSF, Lookup call BD7MQB returned id 0 -> 1234567








Re: YSF to P25 always return fallbackID

Steve N4IRS
 

Looks right. I will do some local testing this week. You might try to removed the datafile and download a fresh copy.

Steve

On 12/14/18 7:52 PM, lazy walker wrote:
Here is mine >
I: 2018-12-14 16:28:19.781 DMR Id Lookups
I: 2018-12-14 16:28:19.781 File: /var/lib/mmdvm/DMRIds.dat
I: 2018-12-14 16:28:19.781 Reload: 24 hours
I: 2018-12-14 16:28:19.874 Loaded 116072 Ids to the DMR callsign lookup table
I: 2018-12-14 16:28:19.874 YSF RF Parameters

On Sat, Dec 15, 2018 at 8:43 AM Steve N4IRS <szingman@msgstor.com> wrote:
Check when MMDVM_Bridge starts up. You should see this in the log:
I: 2018-12-02 11:33:12.161 DMR Id Lookups
I: 2018-12-02 11:33:12.161 File: /var/lib/mmdvm/DMRIds.dat
I: 2018-12-02 11:33:12.161 Reload: 24 hours
I: 2018-12-02 11:33:12.690 Loaded 117442 Ids to the DMR callsign lookup table
I: 2018-12-02 11:33:12.690 P25 RF Parameters
I: 2018-12-02 11:33:12.690 Started the DMR Id lookup reload thread

I bolded the 2 important entries. Check yours.

Steve N4IRS


On 12/14/18 7:33 PM, lazy walker wrote:

Hi Steve,
Yes i'm pretty sure we have the DmrId.dat file right :

grep BD7MQB /var/lib/mmdvm/DMRIds.dat
4607133,BD7MQB,Michael Changzhi Cai,Shenzhen/Guangdong,Hu Nan Guang
Dong Guang Xi,China,DMR


On Sat, Dec 15, 2018 at 12:18 AM Steve N4IRS <szingman@msgstor.com> wrote:

Please check MMDVM_Bridge.ini for:
[DMR Id Lookup]
File=/var/lib/mmdvm/DMRIds.dat

Make sure that points to a valid ID file
Then make sure it contains a ID:
grep BD7MQB /var/lib/mmdvm/DMRIds.dat

Steve N4IRS

On 12/14/2018 10:37 AM, lazy walker wrote:

I: 2018-12-14 15:27:35.370 YSF, Lookup call BD7MQB returned id 0 -> 1234567







Re: YSF to P25 always return fallbackID

Michael BD7MQB
 

Here is mine >
I: 2018-12-14 16:28:19.781 DMR Id Lookups
I: 2018-12-14 16:28:19.781 File: /var/lib/mmdvm/DMRIds.dat
I: 2018-12-14 16:28:19.781 Reload: 24 hours
I: 2018-12-14 16:28:19.874 Loaded 116072 Ids to the DMR callsign lookup table
I: 2018-12-14 16:28:19.874 YSF RF Parameters

On Sat, Dec 15, 2018 at 8:43 AM Steve N4IRS <szingman@msgstor.com> wrote:

Check when MMDVM_Bridge starts up. You should see this in the log:
I: 2018-12-02 11:33:12.161 DMR Id Lookups
I: 2018-12-02 11:33:12.161 File: /var/lib/mmdvm/DMRIds.dat
I: 2018-12-02 11:33:12.161 Reload: 24 hours
I: 2018-12-02 11:33:12.690 Loaded 117442 Ids to the DMR callsign lookup table
I: 2018-12-02 11:33:12.690 P25 RF Parameters
I: 2018-12-02 11:33:12.690 Started the DMR Id lookup reload thread

I bolded the 2 important entries. Check yours.

Steve N4IRS


On 12/14/18 7:33 PM, lazy walker wrote:

Hi Steve,
Yes i'm pretty sure we have the DmrId.dat file right :

grep BD7MQB /var/lib/mmdvm/DMRIds.dat
4607133,BD7MQB,Michael Changzhi Cai,Shenzhen/Guangdong,Hu Nan Guang
Dong Guang Xi,China,DMR


On Sat, Dec 15, 2018 at 12:18 AM Steve N4IRS <szingman@msgstor.com> wrote:

Please check MMDVM_Bridge.ini for:
[DMR Id Lookup]
File=/var/lib/mmdvm/DMRIds.dat

Make sure that points to a valid ID file
Then make sure it contains a ID:
grep BD7MQB /var/lib/mmdvm/DMRIds.dat

Steve N4IRS

On 12/14/2018 10:37 AM, lazy walker wrote:

I: 2018-12-14 15:27:35.370 YSF, Lookup call BD7MQB returned id 0 -> 1234567







Re: NXDNReflector with DVSwitch

Steve N4IRS
 

Who da thunk it.
Yes, NXDN, D-Star and P25 REQUIRE a gateway.
DMR does not need one.
YSF can use one and it does bring features to the table.

Mike and I have discussed removing the need for P25 and maybe NXDN. We have not decided yet.

Glad I was able to help you get it going.

Steve N4IRS

On 12/14/18 5:20 PM, JJ Cummings wrote:
You are correct sir... I had to undo all of the things that I had monkeyed with to try and make it work before and now it works perfectly!

On Fri, Dec 14, 2018 at 7:50 AM Steve N4IRS <szingman@...> wrote:
If I remember, the defaults in MMDVM_Bridge.ini and the defaults in NXDN_Gateway match up fine.

On 12/14/2018 9:36 AM, JJ Cummings wrote:
So how do I tie NXDNGateway into DVSwitch, I don't even see packets sourcing from DVSwitch toward anything... I'll try it with NXDNGateway in between such as follows and see what happens:

NXDNReflector <-> NXDNGateway <-> DVSwitch etc....

On Fri, Dec 14, 2018 at 7:28 AM Steve N4IRS <szingman@...> wrote:
OK,
Yes it works with YSF. No it does not work with NXDN. You need NXDNGateway.

On 12/14/2018 9:09 AM, JJ Cummings wrote:
I am not, I’m doing what I have with YSFReflector that works.. so 

NXDNReflector <-> DVSwitch <-> Analog_Bridge

Where DVSwitch of course makes the outbound connections to either side etc..

Sent from the iRoad

On Dec 13, 2018, at 23:47, Steve N4IRS <szingman@...> wrote:

Are you running NXDNGateway?




Re: YSF to P25 always return fallbackID

Steve N4IRS
 

Check when MMDVM_Bridge starts up. You should see this in the log:
I: 2018-12-02 11:33:12.161 DMR Id Lookups
I: 2018-12-02 11:33:12.161     File: /var/lib/mmdvm/DMRIds.dat
I: 2018-12-02 11:33:12.161     Reload: 24 hours
I: 2018-12-02 11:33:12.690 Loaded 117442 Ids to the DMR callsign lookup table
I: 2018-12-02 11:33:12.690 P25 RF Parameters
I: 2018-12-02 11:33:12.690 Started the DMR Id lookup reload thread

I bolded the 2 important entries. Check yours.

Steve N4IRS


On 12/14/18 7:33 PM, lazy walker wrote:
Hi Steve,
Yes i'm pretty sure we have the DmrId.dat file right :

      
grep BD7MQB /var/lib/mmdvm/DMRIds.dat
4607133,BD7MQB,Michael Changzhi Cai,Shenzhen/Guangdong,Hu Nan Guang
Dong Guang Xi,China,DMR


On Sat, Dec 15, 2018 at 12:18 AM Steve N4IRS <szingman@...> wrote:
Please check MMDVM_Bridge.ini for:
[DMR Id Lookup]
File=/var/lib/mmdvm/DMRIds.dat

Make sure that points to a valid ID file
Then make sure it contains a ID:
grep BD7MQB /var/lib/mmdvm/DMRIds.dat

Steve N4IRS

On 12/14/2018 10:37 AM, lazy walker wrote:

I: 2018-12-14 15:27:35.370 YSF, Lookup call BD7MQB returned id 0 -> 1234567







Re: YSF to P25 always return fallbackID

Michael BD7MQB
 

Hi Steve,
Yes i'm pretty sure we have the DmrId.dat file right :
grep BD7MQB /var/lib/mmdvm/DMRIds.dat
4607133,BD7MQB,Michael Changzhi Cai,Shenzhen/Guangdong,Hu Nan Guang
Dong Guang Xi,China,DMR


On Sat, Dec 15, 2018 at 12:18 AM Steve N4IRS <szingman@msgstor.com> wrote:

Please check MMDVM_Bridge.ini for:
[DMR Id Lookup]
File=/var/lib/mmdvm/DMRIds.dat

Make sure that points to a valid ID file
Then make sure it contains a ID:
grep BD7MQB /var/lib/mmdvm/DMRIds.dat

Steve N4IRS

On 12/14/2018 10:37 AM, lazy walker wrote:

I: 2018-12-14 15:27:35.370 YSF, Lookup call BD7MQB returned id 0 -> 1234567




--
http://greatcube.com


Re: NXDNReflector with DVSwitch

JJ Cummings
 

You are correct sir... I had to undo all of the things that I had monkeyed with to try and make it work before and now it works perfectly!


On Fri, Dec 14, 2018 at 7:50 AM Steve N4IRS <szingman@...> wrote:
If I remember, the defaults in MMDVM_Bridge.ini and the defaults in NXDN_Gateway match up fine.

On 12/14/2018 9:36 AM, JJ Cummings wrote:
So how do I tie NXDNGateway into DVSwitch, I don't even see packets sourcing from DVSwitch toward anything... I'll try it with NXDNGateway in between such as follows and see what happens:

NXDNReflector <-> NXDNGateway <-> DVSwitch etc....

On Fri, Dec 14, 2018 at 7:28 AM Steve N4IRS <szingman@...> wrote:
OK,
Yes it works with YSF. No it does not work with NXDN. You need NXDNGateway.

On 12/14/2018 9:09 AM, JJ Cummings wrote:
I am not, I’m doing what I have with YSFReflector that works.. so 

NXDNReflector <-> DVSwitch <-> Analog_Bridge

Where DVSwitch of course makes the outbound connections to either side etc..

Sent from the iRoad

On Dec 13, 2018, at 23:47, Steve N4IRS <szingman@...> wrote:

Are you running NXDNGateway?



Re: YSF to P25 always return fallbackID

Steve N4IRS
 

Please check MMDVM_Bridge.ini for:
[DMR Id Lookup]
File=/var/lib/mmdvm/DMRIds.dat

Make sure that points to a valid ID file
Then make sure it contains a ID:
grep BD7MQB /var/lib/mmdvm/DMRIds.dat

Steve N4IRS

On 12/14/2018 10:37 AM, lazy walker wrote:
I: 2018-12-14 15:27:35.370 YSF, Lookup call BD7MQB returned id 0 -> 1234567


YSF to P25 always return fallbackID

Michael BD7MQB
 

Hi, I'm making a ysf-p25 bridge, but it hit fallbackID all the time, below are clips from log and my config

MMDVM_Bridge.log

M: 2018-12-14 15:27:35.370 YSF, received network data from BD7MQB     to ALL        at BD7MQB    

I: 2018-12-14 15:27:35.370 YSF, Lookup call BD7MQB returned id 0 -> 1234567

M: 2018-12-14 15:27:35.370 P25, TX state = ON

I: 2018-12-14 15:27:35.370 P25, Begin TX: src=1234567 rpt=0 dst=1 slot=2 cc=0

 

M: 2018-12-14 15:27:39.589 YSF, received network end of transmission, 4.5 seconds, 0% packet loss, BER: 0.0%

M: 2018-12-14 15:27:39.589 P25, TX state = OFF


DVSwitch.ini

[YSF]

Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)

TXPort = 35100                  ; Port to send AMBE TLV frames to (export)

RXPort = 35103                  ; Port to listen on (import)

FallbackID = 1234567            ; In case we can not find a valid DMR id in the database, export this one

ExportTG = 1                 ; Which TG to export

Slot = 2                        ; Export slot


MMDVM_Bridge.ini

[DMR Id Lookup]

File=/var/lib/mmdvm/DMRIds.dat

Time=24


i can sure that all dmr id are valid and can be found inside DMRIds.dat, any suggestion?
TNX


Re: NXDNReflector with DVSwitch

Steve N4IRS
 

If I remember, the defaults in MMDVM_Bridge.ini and the defaults in NXDN_Gateway match up fine.

On 12/14/2018 9:36 AM, JJ Cummings wrote:
So how do I tie NXDNGateway into DVSwitch, I don't even see packets sourcing from DVSwitch toward anything... I'll try it with NXDNGateway in between such as follows and see what happens:

NXDNReflector <-> NXDNGateway <-> DVSwitch etc....

On Fri, Dec 14, 2018 at 7:28 AM Steve N4IRS <szingman@...> wrote:
OK,
Yes it works with YSF. No it does not work with NXDN. You need NXDNGateway.

On 12/14/2018 9:09 AM, JJ Cummings wrote:
I am not, I’m doing what I have with YSFReflector that works.. so 

NXDNReflector <-> DVSwitch <-> Analog_Bridge

Where DVSwitch of course makes the outbound connections to either side etc..

Sent from the iRoad

On Dec 13, 2018, at 23:47, Steve N4IRS <szingman@...> wrote:

Are you running NXDNGateway?



Re: NXDNReflector with DVSwitch

Steve N4IRS
 

MMDVM_Bridge <-> NXDN_Gateway <-> NXDN Reflector

On 12/14/2018 9:36 AM, JJ Cummings wrote:
So how do I tie NXDNGateway into DVSwitch, I don't even see packets sourcing from DVSwitch toward anything... I'll try it with NXDNGateway in between such as follows and see what happens:

NXDNReflector <-> NXDNGateway <-> DVSwitch etc....

On Fri, Dec 14, 2018 at 7:28 AM Steve N4IRS <szingman@...> wrote:
OK,
Yes it works with YSF. No it does not work with NXDN. You need NXDNGateway.

On 12/14/2018 9:09 AM, JJ Cummings wrote:
I am not, I’m doing what I have with YSFReflector that works.. so 

NXDNReflector <-> DVSwitch <-> Analog_Bridge

Where DVSwitch of course makes the outbound connections to either side etc..

Sent from the iRoad

On Dec 13, 2018, at 23:47, Steve N4IRS <szingman@...> wrote:

Are you running NXDNGateway?



Re: NXDNReflector with DVSwitch

JJ Cummings
 

So how do I tie NXDNGateway into DVSwitch, I don't even see packets sourcing from DVSwitch toward anything... I'll try it with NXDNGateway in between such as follows and see what happens:

NXDNReflector <-> NXDNGateway <-> DVSwitch etc....

On Fri, Dec 14, 2018 at 7:28 AM Steve N4IRS <szingman@...> wrote:
OK,
Yes it works with YSF. No it does not work with NXDN. You need NXDNGateway.

On 12/14/2018 9:09 AM, JJ Cummings wrote:
I am not, I’m doing what I have with YSFReflector that works.. so 

NXDNReflector <-> DVSwitch <-> Analog_Bridge

Where DVSwitch of course makes the outbound connections to either side etc..

Sent from the iRoad

On Dec 13, 2018, at 23:47, Steve N4IRS <szingman@...> wrote:

Are you running NXDNGateway?


Re: NXDNReflector with DVSwitch

Steve N4IRS
 

OK,
Yes it works with YSF. No it does not work with NXDN. You need NXDNGateway.

On 12/14/2018 9:09 AM, JJ Cummings wrote:
I am not, I’m doing what I have with YSFReflector that works.. so 

NXDNReflector <-> DVSwitch <-> Analog_Bridge

Where DVSwitch of course makes the outbound connections to either side etc..

Sent from the iRoad

On Dec 13, 2018, at 23:47, Steve N4IRS <szingman@...> wrote:

Are you running NXDNGateway?

7981 - 8000 of 10560