Date   

Re: Blog with P25<->DMR Info

Doug - W4DBG
 

Thanks!

On Sun, Jan 27, 2019 at 7:50 PM <mike@...> wrote:
I didn’t change anything in that file.

-Mike
On Sun, Jan 27, 2019 at 5:48 PM Doug - W4DBG <douggooden@...> wrote:
Mike,

Nice job. One question, did you use DVSwitch.ini and if so, what are those settings. I may have missed them in the instructions but just checking.

Thanks

Doug
W4DBG



On Sun, Jan 27, 2019 at 12:10 PM Steve N4IRS <szingman@...> wrote:
If you like, I'll set you up to add the the wiki.

On 1/27/19 1:07 PM, mike@... wrote:
Greetings all! 
I recently put together a P25 to DMR cross-mode link. I am very appreciative of Steve and many others on the board for their support as I leaned my way through it. 

I decided to spin up a blog and post some instructions for anyone else that may be interested in doing this, or building a P25Reflector. I *think* I captured everything... and my hope is that the information posted is helpful to others. 


Cheers, 
Mike - N6MIK



--
Doug Gooden
troytrojan@...

--
Doug Gooden
troytrojan@...


Re: Blog with P25<->DMR Info

mike@...
 

I didn’t change anything in that file.

-Mike

On Sun, Jan 27, 2019 at 5:48 PM Doug - W4DBG <douggooden@...> wrote:
Mike,

Nice job. One question, did you use DVSwitch.ini and if so, what are those settings. I may have missed them in the instructions but just checking.

Thanks

Doug
W4DBG



On Sun, Jan 27, 2019 at 12:10 PM Steve N4IRS <szingman@...> wrote:
If you like, I'll set you up to add the the wiki.

On 1/27/19 1:07 PM, mike@... wrote:
Greetings all! 
I recently put together a P25 to DMR cross-mode link. I am very appreciative of Steve and many others on the board for their support as I leaned my way through it. 

I decided to spin up a blog and post some instructions for anyone else that may be interested in doing this, or building a P25Reflector. I *think* I captured everything... and my hope is that the information posted is helpful to others. 


Cheers, 
Mike - N6MIK



--
Doug Gooden
troytrojan@...


Re: Blog with P25<->DMR Info

Doug - W4DBG
 

Mike,

Nice job. One question, did you use DVSwitch.ini and if so, what are those settings. I may have missed them in the instructions but just checking.

Thanks

Doug
W4DBG



On Sun, Jan 27, 2019 at 12:10 PM Steve N4IRS <szingman@...> wrote:
If you like, I'll set you up to add the the wiki.

On 1/27/19 1:07 PM, mike@... wrote:
Greetings all! 
I recently put together a P25 to DMR cross-mode link. I am very appreciative of Steve and many others on the board for their support as I leaned my way through it. 

I decided to spin up a blog and post some instructions for anyone else that may be interested in doing this, or building a P25Reflector. I *think* I captured everything... and my hope is that the information posted is helpful to others. 


Cheers, 
Mike - N6MIK



--
Doug Gooden
troytrojan@...


Re: Blog with P25<->DMR Info

Steve N4IRS
 

If you like, I'll set you up to add the the wiki.

On 1/27/19 1:07 PM, mike@... wrote:
Greetings all! 
I recently put together a P25 to DMR cross-mode link. I am very appreciative of Steve and many others on the board for their support as I leaned my way through it. 

I decided to spin up a blog and post some instructions for anyone else that may be interested in doing this, or building a P25Reflector. I *think* I captured everything... and my hope is that the information posted is helpful to others. 


Cheers, 
Mike - N6MIK


Blog with P25<->DMR Info

mike@...
 

Greetings all! 
I recently put together a P25 to DMR cross-mode link. I am very appreciative of Steve and many others on the board for their support as I leaned my way through it. 

I decided to spin up a blog and post some instructions for anyone else that may be interested in doing this, or building a P25Reflector. I *think* I captured everything... and my hope is that the information posted is helpful to others. 


Cheers, 
Mike - N6MIK


Re: MMDVM_Bridge : connect with suffix other than -B ?

EA4GAX - Sergio
 

I don`t know, I would have to look at it, but it does not sound good.


ambe server to dvswitch dstar <-> ysf/dmr

bjorne sa6aux
 

Hi.

What ambe server should i use and how i connect it between dstar <-> ysf/dmr?


//bjorne sa6aux


Re: MMDVM_Bridge : connect with suffix other than -B ?

EA4GAX - Sergio
 

And... Who configure dstar module? I don't undestand dtar config on imagen allstarlink.


Re: MMDVM_Bridge : connect with suffix other than -B ?

Steve N4IRS
 

Does MMDVMHost do the same thing?
Is there anything in DMRGateway log?

Steve

On 1/27/19 10:00 AM, Santu OTTAVI (TK1BI) wrote:
Hi,

I'm using MMDVM_Bridge to connect to my XLX server through DMRGateway. On the XLX dashboard, it appears as "TK5KP-B". I'd like to change the "-B" suffix to "-G". Is it possible to do that ?

Thank you in advance. 73 de TK1BI


Re: MMDVM_Bridge : connect with suffix other than -B ?

EA4GAX - Sergio
 

Have DMRGateway allstarlink imagen?


Re: MMDVM_Bridge : connect with suffix other than -B ?

Steve N4IRS
 

Sorry, I was thinking D-Star in MMDVM_Bridge. I don't know where that value comes from. Maybe DMRGateway

On 1/27/19 10:17 AM, EA4GAX - Sergio wrote:
It's C but dstar to be = 0, I want It for DMR, is possible enter -C?, It defaut is -B.
Thank yor Steve.


Re: MMDVM_Bridge : connect with suffix other than -B ?

EA4GAX - Sergio
 

It's C but dstar to be = 0, I want It for DMR, is possible enter -C?, It defaut is -B.
Thank yor Steve.


Re: MMDVM_Bridge : connect with suffix other than -B ?

EA4GAX - Sergio
 

Hi I too to be interesting this cuestion.
Thank you


Re: MMDVM_Bridge : connect with suffix other than -B ?

Steve N4IRS
 

Look in the [D-Star] stanza in MMDVM_Bridge.ini and see if it's set to B for Module

On 1/27/19 10:00 AM, Santu OTTAVI (TK1BI) wrote:
Hi,

I'm using MMDVM_Bridge to connect to my XLX server through DMRGateway. On the XLX dashboard, it appears as "TK5KP-B". I'd like to change the "-B" suffix to "-G". Is it possible to do that ?

Thank you in advance. 73 de TK1BI


MMDVM_Bridge : connect with suffix other than -B ?

Santu OTTAVI (TK1BI)
 

Hi,

I'm using MMDVM_Bridge to connect to my XLX server through DMRGateway. On the XLX dashboard, it appears as "TK5KP-B". I'd like to change the "-B" suffix to "-G". Is it possible to do that ?

Thank you in advance. 73 de TK1BI


Re: AMBE server use with md380-emu :D

Themis Floros SV4QXF
 

Hello Steve one question , md380-emu is possible to support transcoding between DSTAR<->DMR?


Re: Blank Log files

Skyler Fennell
 

So hopefully I can manage my log folder a little better with new rules and some clean out.

My logs were all pretty busy. I ended up making logrotate a little more strict. UFW (firewall) logs every blocked access attempt, which is a huge amount... just IP after IP banging at me from China. 

Found my auth.log full of stuff. One of my AllStar nodes with a reverse ssh service was continuously trying to log in and failing due to new ssh keys... added a line or 2 of log every second. 


On Wed, Jan 23, 2019 at 11:52 AM Steve N4IRS <szingman@...> wrote:
ls -lah


On 1/23/2019 1:51 PM, Skyler Fennell wrote:
I found it in the log2ram config file and increased to 100MB. 

Somethings writing a lot there — im trying to find what it is— I’m already at 7 additional MB used after the first 12 hours or so. 

On Wed, Jan 23, 2019 at 9:20 AM JJ Cummings <cummingsj@...> wrote:
I would have to find it and load it... I"m still pretty sure that you can overwrite the defaults using /etc/fstab -> https://manpages.debian.org/stretch/initscripts/tmpfs.5.en.html

On Wed, Jan 23, 2019 at 3:40 AM Steve N4IRS <szingman@...> wrote:
I don't remember DIAL setting up a RAM drive for Intel / AMD.

On 1/23/19 12:40 AM, Skyler Fennell wrote:
I'm using an older distro of DIAL AllStar manual install from a Debian 8 virtual machine, ( I need older app_rpt.c patched for IRLP ) 


On Tue, Jan 22, 2019 at 4:01 PM JJ Cummings <cummingsj@...> wrote:
What distro/image are you using?

On Tue, Jan 22, 2019 at 3:56 PM Skyler Fennell <electricity440@...> wrote:
This does not exist in my fstab. This is all I have:

# /etc/fstab: static file system information.

#

# Use 'blkid' to print the universally unique identifier for a

# device; this may be used with UUID= as a more robust way to name devices

# that works even if disks are added and removed. See fstab(5).

#

# <file system> <mount point>   <type>  <options>       <dump>  <pass>

# / was on /dev/vda1 during installation

UUID=87ebb3ad-15df-4e86-80a1-ccfd1cbe13c8 /               ext4    errors=remount-ro 0       1

/dev/sr0        /media/cdrom0   udf,iso9660 user,noauto     0       0







On Tue, Jan 22, 2019 at 10:43 AM JJ Cummings <cummingsj@...> wrote:
If you look in /etc/fstab you should see an entry like the following (similar) set the size= option to what I have it or what you think...  Don't get too crazy because this uses memory and not disk..

tmpfs    /var/log    tmpfs    defaults,noatime,nosuid,mode=0755,size=100m

JJC

On Tue, Jan 22, 2019 at 10:29 AM Skyler Fennell <electricity440@...> wrote:
Ok thank you. Yeah I will get a rotating log system and get the old garbage out of there.

What commands do I use to increase the file size?

Thanks,
Skyler

On Tue, Jan 22, 2019 at 8:57 AM JJ Cummings <cummingsj@...> wrote:
Skyler - time to get logrotate running on that system to age out old things from the tmpfs where /var/log is mounted.  I'd also look at increasing that to 100M maybe as long as you have enough memory for it.

On Tue, Jan 22, 2019 at 8:38 AM Steve N4IRS <szingman@...> wrote:
Your log directory is full:
log2ram          40M   40M     0 100% /var/log
Can I assume it's a ASL 1.01 system?


On 1/22/2019 10:37 AM, Skyler Fennell wrote:

mount

sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)

proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)

udev on /dev type devtmpfs (rw,relatime,size=10240k,nr_inodes=125703,mode=755)

devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)

tmpfs on /run type tmpfs (rw,nosuid,relatime,size=204852k,mode=755)

/dev/vda1 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)

securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)

tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)

tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)

tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)

cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)

pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)

cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)

cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)

cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)

cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)

cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)

cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)

cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)

tmpfs on /etc/machine-id type tmpfs (ro,relatime,size=204852k,mode=755)

systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=22,pgrp=1,timeout=300,minproto=5,maxproto=5,direct)

debugfs on /sys/kernel/debug type debugfs (rw,relatime)

hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)

mqueue on /dev/mqueue type mqueue (rw,relatime)

fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)

/dev/vda1 on /var/log.hdd type ext4 (rw,relatime,errors=remount-ro,data=ordered)

log2ram on /var/log type tmpfs (rw,nosuid,nodev,noexec,relatime,size=40960k,mode=755)

binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,relatime)

tmpfs on /run/user/0 type tmpfs (rw,nosuid,nodev,relatime,size=102428k,mode=700)


On Tue, Jan 22, 2019 at 8:36 AM Steve N4IRS <szingman@...> wrote:
Also show result of mount


On 1/22/2019 10:34 AM, Skyler Fennell wrote:
Interesting .... So when I try to write a file to this directory and add content to it, I get an error "No Space Left on Device" 

However, my root directory has 17GB remaining! How could this be?

On Tue, Jan 22, 2019 at 8:32 AM Skyler Fennell via Groups.Io <electricity440=gmail.com@groups.io> wrote:
Heres something else that is interesting, I am also running an instance of MMDVM_bridge for something else ( not related to the P25 ), and it's log files have been blank for a couple of months. 

I have similar log settings for this
MMDVM_Bridge.ini

[Log]

# Logging levels, 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal

DisplayLevel=1

FileLevel=1

FilePath=/var/log/mmdvm

FileRoot=MMDVM_Bridge


On Tue, Jan 22, 2019 at 8:26 AM Skyler Fennell via Groups.Io <electricity440=gmail.com@groups.io> wrote:
Nope, it's still blank

root@stn3764:/var/log/mmdvm# cat P25Reflector-2019-01-22.log 

root@stn3764:/var/log/mmdvm# 


On Tue, Jan 22, 2019 at 8:24 AM Steve N4IRS <szingman@...> wrote:
OK, good.
Check your log file now. Anything in it?

On 1/22/2019 10:23 AM, Skyler Fennell wrote:

I: 2019-01-22 15:22:45.302 Opening P25 network connection

I: 2019-01-22 15:22:45.386 Loaded 109242 Ids to the callsign lookup table

M: 2019-01-22 15:22:45.386 Starting P25Reflector-20161101

I: 2019-01-22 15:22:45.386 Started the DMR Id lookup reload thread

M: 2019-01-22 15:22:47.724 Adding KG0SKY     (71.196.210.222:35143)

M: 2019-01-22 15:22:48.190 Adding WN0EHE     (71.228.144.180:42010)


On Tue, Jan 22, 2019 at 8:18 AM Steve N4IRS <szingman@...> wrote:
when you run P25Reflector in the foreground what do you get?
./P25Reflector P25Reflector.ini

Steve

On 1/22/2019 10:15 AM, Skyler Fennell wrote:
First, I would like to put a great thanks to Steve and everyone on this group for there efforts helping everyone out. 

I recently installed P25Reflector and I wen't to check my log directory, and I have blank files generated every day with the proper date but with no data in them. 

Below is my config for the P25Reflector.ini


[General]

Daemon=0


[Id Lookup]

Name=DMRIds.dat

Time=24


Re: System test

K4VL <73dek4vl@...>
 

I understand, Like I said before I had it working before I changed callsigns. I just find it hard to believe that affected it. I will reimage the box when I get a chance. Thanks for your help.

On Fri, Jan 25, 2019 at 7:05 PM Steve N4IRS <szingman@...> wrote:
That is a Pandora's box I no longer wish to open. I would (and did) spend my whole day logged into someones machine. All I can suggest it to start over. Follow the howto exactly. There are stopping points where you test your work before going forward.

Steve


On 1/25/19 8:00 PM, K4VL wrote:
Is it something you can remote in and look at for me sometime?

On Fri, Jan 25, 2019 at 6:59 PM Steve N4IRS <szingman@...> wrote:
No clue.

On 1/25/19 7:58 PM, K4VL wrote:

This is what I get from MMDVM_Bridge. I get no change on Analog_Bridge

M: 2019-01-26 00:56:59.166 DMR Slot 2, received network voice header from K4VL to TG 310286
M: 2019-01-26 00:56:59.881 DMR Talker Alias (Data Format 1, Received 6/20 char): 'K4VL D'
M: 2019-01-26 00:57:00.597 DMR Talker Alias (Data Format 1, Received 13/20 char): 'K4VL DMR ID: '
M: 2019-01-26 00:57:01.077 DMR Slot 2, received network end of voice transmission, 1.9 seconds, 0% packet loss, BER: 0.3%



On Fri, Jan 25, 2019 at 6:55 PM Steve N4IRS <szingman@...> wrote:
OK, with both programs running send traffic through BM. Show me the traffic at MMDVM_Bridge and show me the output from Analog_Bridge at the same time stamp.

On 1/25/19 7:51 PM, K4VL wrote:
Analog_Bridge

I: 2019-01-26 00:48:46.569 Analog Bridge Version 1.1 Wed May 30 11:50:28 EDT 2018
I: 2019-01-26 00:48:46.569 Copyright (C) 2018 DVSwitch, INAD.
I: 2019-01-26 00:48:46.569 Created by Mike N4IRR and Steve N4IRS
I: 2019-01-26 00:48:46.569 Analog Bridge comes with ABSOLUTELY NO WARRANTY
I: 2019-01-26 00:48:46.569
I: 2019-01-26 00:48:46.569 This software is for use on amateur radio networks only,
I: 2019-01-26 00:48:46.569 it is to be used for educational purposes only. Its use on
I: 2019-01-26 00:48:46.569 commercial networks is strictly prohibited.
I: 2019-01-26 00:48:46.569
I: 2019-01-26 00:48:46.569 Analog Bridge is starting
M: 2019-01-26 00:48:46.570 Setting [GENERAL] logLevel -> 2
M: 2019-01-26 00:48:46.570 Setting [GENERAL] exportMetadata -> true
M: 2019-01-26 00:48:46.570 Setting [GENERAL] subscriberFile -> /var/lib/dvswitch/subscriber_ids.csv
M: 2019-01-26 00:48:46.570 Setting [GENERAL] decoderFallBack -> true
M: 2019-01-26 00:48:46.570 Setting [GENERAL] useEmulator -> false
M: 2019-01-26 00:48:46.570 Setting [GENERAL] emulatorAddress -> 127.0.0.1:2470
M: 2019-01-26 00:48:46.570 Setting [GENERAL] outputAudioDevice -> /dev/null
M: 2019-01-26 00:48:46.570 Setting [GENERAL] inputAudioDevice -> /dev/null
M: 2019-01-26 00:48:46.570 Setting [GENERAL] useMicrophone -> false
M: 2019-01-26 00:48:46.570 Setting [GENERAL] useVox -> false
M: 2019-01-26 00:48:46.570 Setting [GENERAL] voxDecay -> 2
M: 2019-01-26 00:48:46.570 Setting [GENERAL] voxTrigger -> 200
M: 2019-01-26 00:48:46.570 Setting [AMBE_AUDIO] address -> 127.0.0.1
M: 2019-01-26 00:48:46.570 Setting [AMBE_AUDIO] txPort -> 31103
M: 2019-01-26 00:48:46.570 Setting [AMBE_AUDIO] rxPort -> 31100
M: 2019-01-26 00:48:46.570 Setting [AMBE_AUDIO] ambeMode -> DMR
M: 2019-01-26 00:48:46.570 Setting [AMBE_AUDIO] minTxTimeMS -> 2000
M: 2019-01-26 00:48:46.570 Setting [AMBE_AUDIO] gatewayDmrId -> 3116280
M: 2019-01-26 00:48:46.570 Setting [AMBE_AUDIO] repeaterID -> 1234567
M: 2019-01-26 00:48:46.570 Setting [AMBE_AUDIO] txTg -> 310286
M: 2019-01-26 00:48:46.570 Setting [AMBE_AUDIO] txTs -> 2
M: 2019-01-26 00:48:46.570 Setting [AMBE_AUDIO] colorCode -> 1
M: 2019-01-26 00:48:46.571 Setting [USRP] address -> 127.0.0.1
M: 2019-01-26 00:48:46.571 Setting [USRP] txPort -> 32001
M: 2019-01-26 00:48:46.571 Setting [USRP] rxPort -> 34001
M: 2019-01-26 00:48:46.571 Setting [USRP] aslAudio -> AUDIO_UNITY
M: 2019-01-26 00:48:46.571 Setting [USRP] agcGain -> -20
M: 2019-01-26 00:48:46.571 Setting [USRP] dmrAudio -> AUDIO_UNITY
M: 2019-01-26 00:48:46.571 Setting [USRP] dmrGain -> 0.35
W: 2019-01-26 00:48:46.571 Using deprecated option "server"
M: 2019-01-26 00:48:46.571 Setting [DV3000] server -> 127.0.0.1
W: 2019-01-26 00:48:46.571 Using deprecated option "port"
M: 2019-01-26 00:48:46.571 Setting [DV3000] port -> 2460
W: 2019-01-26 00:48:46.571 ioctl reset error
W: 2019-01-26 00:48:46.571 ioctl speed error
W: 2019-01-26 00:48:46.571 ioctl stereo error
W: 2019-01-26 00:48:46.571 ioctl setfmt error
M: 2019-01-26 00:48:46.571 Audio In/Out Device: /dev/null
I: 2019-01-26 00:48:46.571 Open UDP listener on 127.0.0.1:31100
I: 2019-01-26 00:48:46.571 Open USRP on 127.0.0.1:32001
M: 2019-01-26 00:48:46.571 Connecting to DV3000 hardware......
W: 2019-01-26 00:48:47.578 DV3000 not found at 127.0.0.1:2460
Project 25 IMBE Encoder/Decoder Fixed-Point implementation
Developed by Pavel Yazev E-mail: pyazev@...
Version 1.0 (c) Copyright 2009
This program comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it
under certain conditions; see the file ``LICENSE'' for details.
I: 2019-01-26 00:48:47.805 Subscriber IDs loaded: 120102
I: 2019-01-26 00:48:47.805 Default extended metadata <K4VL>
W: 2019-01-26 00:48:47.805 Using software MBE decoder version 1.2.3
W: 2019-01-26 00:48:47.805 Using software OP25 IMBE/AMBE vocoder
I: 2019-01-26 00:48:47.805 Starting Analog_Bridge --> USRP thread
I: 2019-01-26 00:48:47.805 Open UDP listener on 127.0.0.1:34001
I: 2019-01-26 00:48:47.805 Starting USRP --> HB_Bridge thread

MMDVM_Bridge

I: 2019-01-26 00:46:57.746 MMDVM_Bridge:
I: 2019-01-26 00:46:57.746 Portions Copyright (C) 2018 DVSwitch, INAD.
I: 2019-01-26 00:46:57.746 Hacks by Mike N4IRR and Steve N4IRS
I: 2019-01-26 00:46:57.746 =
I: 2019-01-26 00:24:42.340 This software is for use on amateur radio networks only,
I: 2019-01-26 00:24:42.340 it is to be used for educational purposes only. Its use on
I: 2019-01-26 00:24:42.340 commercial networks is strictly prohibited.
I: 2019-01-26 00:24:42.340 Copyright(C) 2015-2018 by Jonathan Naylor, G4KLX and others
M: 2019-01-26 00:24:42.340 MMDVM_Bridge-20180423 is starting
M: 2019-01-26 00:24:42.340 Built 13:54:43 May 30 2018 (GitID #9cdea41)
I: 2019-01-26 00:24:42.340 General Parameters
I: 2019-01-26 00:24:42.340     Callsign: K4VL
I: 2019-01-26 00:24:42.340     Id: 3116280
I: 2019-01-26 00:24:42.340     Duplex: no
I: 2019-01-26 00:24:42.340     Timeout: 180s
I: 2019-01-26 00:24:42.340     D-Star: disabled
I: 2019-01-26 00:24:42.340     DMR: enabled
I: 2019-01-26 00:24:42.340     YSF: disabled
I: 2019-01-26 00:24:42.340     P25: disabled
I: 2019-01-26 00:24:42.340     NXDN: disabled
I: 2019-01-26 00:24:42.340 Modem Parameters
I: 2019-01-26 00:24:42.340     Port: /dev/null
I: 2019-01-26 00:24:42.340     RX Invert: no
I: 2019-01-26 00:24:42.340     TX Invert: no
I: 2019-01-26 00:24:42.340     PTT Invert: no
I: 2019-01-26 00:24:42.340     TX Delay: 100ms
I: 2019-01-26 00:24:42.340     RX Offset: 0Hz
I: 2019-01-26 00:24:42.340     TX Offset: 0Hz
I: 2019-01-26 00:24:42.341     RX DC Offset: 0
I: 2019-01-26 00:24:42.341     TX DC Offset: 0
I: 2019-01-26 00:24:42.341     RF Level: 100.0%
I: 2019-01-26 00:24:42.341     DMR Delay: 0 (0.0ms)
I: 2019-01-26 00:24:42.341     RX Level: 50.0%
I: 2019-01-26 00:24:42.341     CW Id TX Level: 50.0%
I: 2019-01-26 00:24:42.341     D-Star TX Level: 50.0%
I: 2019-01-26 00:24:42.341     DMR TX Level: 50.0%
I: 2019-01-26 00:24:42.341     YSF TX Level: 50.0%
I: 2019-01-26 00:24:42.341     P25 TX Level: 50.0%
I: 2019-01-26 00:24:42.341     NXDN TX Level: 50.0%
I: 2019-01-26 00:24:42.341     RX Frequency: 444Hz (444Hz)
I: 2019-01-26 00:24:42.341     TX Frequency: 444Hz (444Hz)
M: 2019-01-26 00:24:42.341 Opening the MMDVM
I: 2019-01-26 00:24:42.341 Display Parameters
I: 2019-01-26 00:24:42.341     Type:
I: 2019-01-26 00:24:42.341 DMR Network Parameters
I: 2019-01-26 00:24:42.341     Address: 3108.repeater.net
I: 2019-01-26 00:24:42.341     Port: 62031
I: 2019-01-26 00:24:42.341     Local: 62032
I: 2019-01-26 00:24:42.341     Jitter: 750ms
I: 2019-01-26 00:24:42.341     Slot 1: disabled
I: 2019-01-26 00:24:42.341     Slot 2: enabled
I: 2019-01-26 00:24:42.341     Mode Hang: 3s
I: 2019-01-26 00:24:42.375 Info Parameters
I: 2019-01-26 00:24:42.375     Callsign: K4VL
I: 2019-01-26 00:24:42.375     RX Frequency: 444Hz
I: 2019-01-26 00:24:42.375     TX Frequency: 444Hz
I: 2019-01-26 00:24:42.375     Power: 1W
I: 2019-01-26 00:24:42.375     Latitude: 36.529999deg N
I: 2019-01-26 00:24:42.375     Longitude: -57.500000deg E
I: 2019-01-26 00:24:42.375     Height: 0m
I: 2019-01-26 00:24:42.375     Location: "Woodlawn, TN"
I: 2019-01-26 00:24:42.375     Description: "MMDVM_Bridge"
I: 2019-01-26 00:24:42.375     URL: ""
M: 2019-01-26 00:24:42.376 DMR, Opening DMR Network
I: 2019-01-26 00:24:42.376 RSSI
I: 2019-01-26 00:24:42.376     Mapping File: RSSI.dat
W: 2019-01-26 00:24:42.376 Cannot open the RSSI data file - RSSI.dat
I: 2019-01-26 00:24:42.376 DMR Id Lookups
I: 2019-01-26 00:24:42.376     File: /var/lib/mmdvm/DMRIds.dat
I: 2019-01-26 00:24:42.376     Reload: 24 hours
I: 2019-01-26 00:24:42.601 Loaded 122585 Ids to the DMR callsign lookup table
I: 2019-01-26 00:24:42.601 DMR RF Parameters
I: 2019-01-26 00:24:42.601     Id: 3116280
I: 2019-01-26 00:24:42.601     Color Code: 1
I: 2019-01-26 00:24:42.601     Self Only: no
I: 2019-01-26 00:24:42.601     Embedded LC Only: yes
I: 2019-01-26 00:24:42.601     Dump Talker Alias Data: no
I: 2019-01-26 00:24:42.601     Prefixes: 0
I: 2019-01-26 00:24:42.601     Call Hang: 3s
I: 2019-01-26 00:24:42.601     TX Hang: 3s
I: 2019-01-26 00:24:42.601     Mode Hang: 10s
M: 2019-01-26 00:24:42.601 DMR, Opening INI file: DVSwitch.ini
I: 2019-01-26 00:24:42.601 Started the DMR Id lookup reload thread
M: 2019-01-26 00:24:42.601 DMR, Setting [DMR] Address -> 127.0.0.1
M: 2019-01-26 00:24:42.601 DMR, Setting [DMR] TXPort -> 31100
M: 2019-01-26 00:24:42.602 DMR, Setting [DMR] RXPort -> 31103
M: 2019-01-26 00:24:42.602 DMR, Setting [DMR] Slot -> 2
M: 2019-01-26 00:24:42.602 DMR, Transmitting on 127.0.0.1:31100 and listening on port 31103.  Result = 1
M: 2019-01-26 00:24:42.602 MMDVM_Bridge-20180423 is running
D: 2019-01-26 00:24:52.642 DMR, Sending authorisation
D: 2019-01-26 00:24:52.678 DMR, Sending configuration
M: 2019-01-26 00:24:52.709 DMR, Logged into the master successfully


On Fri, Jan 25, 2019 at 6:23 PM Steve N4IRS <szingman@...> wrote:
Show me the same thing for MMDVM_Bridge.

On 1/25/19 7:19 PM, K4VL wrote:
I: 2019-01-26 00:19:21.009 Analog Bridge Version 1.1 Wed May 30 11:50:28 EDT 2018
I: 2019-01-26 00:19:21.009 Copyright (C) 2018 DVSwitch, INAD.
I: 2019-01-26 00:19:21.009 Created by Mike N4IRR and Steve N4IRS
I: 2019-01-26 00:19:21.009 Analog Bridge comes with ABSOLUTELY NO WARRANTY
I: 2019-01-26 00:19:21.010
I: 2019-01-26 00:19:21.010 This software is for use on amateur radio networks only,
I: 2019-01-26 00:19:21.010 it is to be used for educational purposes only. Its use on
I: 2019-01-26 00:19:21.010 commercial networks is strictly prohibited.
I: 2019-01-26 00:19:21.010
I: 2019-01-26 00:19:21.010 Analog Bridge is starting
M: 2019-01-26 00:19:21.010 Setting [GENERAL] logLevel -> 2
M: 2019-01-26 00:19:21.010 Setting [GENERAL] exportMetadata -> true
M: 2019-01-26 00:19:21.010 Setting [GENERAL] subscriberFile -> /var/lib/dvswitch/subscriber_ids.csv
M: 2019-01-26 00:19:21.010 Setting [GENERAL] decoderFallBack -> true
M: 2019-01-26 00:19:21.010 Setting [GENERAL] useEmulator -> false
M: 2019-01-26 00:19:21.010 Setting [GENERAL] emulatorAddress -> 127.0.0.1:2470
M: 2019-01-26 00:19:21.010 Setting [GENERAL] outputAudioDevice -> /dev/null
M: 2019-01-26 00:19:21.010 Setting [GENERAL] inputAudioDevice -> /dev/null
M: 2019-01-26 00:19:21.010 Setting [GENERAL] useMicrophone -> false
M: 2019-01-26 00:19:21.010 Setting [GENERAL] useVox -> false
M: 2019-01-26 00:19:21.010 Setting [GENERAL] voxDecay -> 2
M: 2019-01-26 00:19:21.010 Setting [GENERAL] voxTrigger -> 200
M: 2019-01-26 00:19:21.010 Setting [AMBE_AUDIO] address -> 127.0.0.1
M: 2019-01-26 00:19:21.010 Setting [AMBE_AUDIO] txPort -> 31103
M: 2019-01-26 00:19:21.010 Setting [AMBE_AUDIO] rxPort -> 31100
M: 2019-01-26 00:19:21.011 Setting [AMBE_AUDIO] ambeMode -> DMR
M: 2019-01-26 00:19:21.011 Setting [AMBE_AUDIO] minTxTimeMS -> 2000
M: 2019-01-26 00:19:21.011 Setting [AMBE_AUDIO] gatewayDmrId -> 3116280
M: 2019-01-26 00:19:21.011 Setting [AMBE_AUDIO] repeaterID -> 1234567
M: 2019-01-26 00:19:21.011 Setting [AMBE_AUDIO] txTg -> 310286
M: 2019-01-26 00:19:21.011 Setting [AMBE_AUDIO] txTs -> 2
M: 2019-01-26 00:19:21.011 Setting [AMBE_AUDIO] colorCode -> 1
M: 2019-01-26 00:19:21.011 Setting [USRP] address -> 127.0.0.1
M: 2019-01-26 00:19:21.011 Setting [USRP] txPort -> 32001
M: 2019-01-26 00:19:21.011 Setting [USRP] rxPort -> 34001
M: 2019-01-26 00:19:21.011 Setting [USRP] aslAudio -> AUDIO_UNITY
M: 2019-01-26 00:19:21.011 Setting [USRP] agcGain -> -20
M: 2019-01-26 00:19:21.011 Setting [USRP] dmrAudio -> AUDIO_UNITY
M: 2019-01-26 00:19:21.011 Setting [USRP] dmrGain -> 0.35
W: 2019-01-26 00:19:21.011 Using deprecated option "server"
M: 2019-01-26 00:19:21.011 Setting [DV3000] server -> 127.0.0.1
W: 2019-01-26 00:19:21.011 Using deprecated option "port"
M: 2019-01-26 00:19:21.011 Setting [DV3000] port -> 2460
W: 2019-01-26 00:19:21.012 ioctl reset error
W: 2019-01-26 00:19:21.012 ioctl speed error
W: 2019-01-26 00:19:21.012 ioctl stereo error
W: 2019-01-26 00:19:21.012 ioctl setfmt error
M: 2019-01-26 00:19:21.012 Audio In/Out Device: /dev/null
I: 2019-01-26 00:19:21.012 Open UDP listener on 127.0.0.1:31100
I: 2019-01-26 00:19:21.012 Open USRP on 127.0.0.1:32001
M: 2019-01-26 00:19:21.012 Connecting to DV3000 hardware......
W: 2019-01-26 00:19:22.019 DV3000 not found at 127.0.0.1:2460
Project 25 IMBE Encoder/Decoder Fixed-Point implementation
Developed by Pavel Yazev E-mail: pyazev@...
Version 1.0 (c) Copyright 2009
This program comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it
under certain conditions; see the file ``LICENSE'' for details.
I: 2019-01-26 00:19:22.245 Subscriber IDs loaded: 120102
I: 2019-01-26 00:19:22.245 Default extended metadata <K4VL>
W: 2019-01-26 00:19:22.245 Using software MBE decoder version 1.2.3
W: 2019-01-26 00:19:22.245 Using software OP25 IMBE/AMBE vocoder
I: 2019-01-26 00:19:22.245 Starting Analog_Bridge --> USRP thread
I: 2019-01-26 00:19:22.245 Open UDP listener on 127.0.0.1:34001
I: 2019-01-26 00:19:22.246 Starting USRP --> HB_Bridge thread


On Fri, Jan 25, 2019 at 5:57 PM Steve N4IRS <szingman@...> wrote:
No.
Stop the analog_bridge service if it's running.
Make sure it is not running.
ps ax | grep Analog_Bridge

now cd to the Analog_Bridge directory
./Analog_Bridge Analog_Bridge.ini

Copy and paste the COMPLETE output.

Steve

On 1/25/19 6:52 PM, K4VL wrote:
This is from the MMDVM_Bridge

[General]
Callsign=K4VL
Id=3116280
Timeout=180
Duplex=0

Th ID in here is the same as the GatewayDmrID in the Analog_Bridge. Is this the problem?

On Fri, Jan 25, 2019 at 5:46 PM K4VL via Groups.Io <73dek4vl=gmail.com@groups.io> wrote:
This is what I have in the Analog_Bridge.ini file

[AMBE_AUDIO]
address = 127.0.0.1                      ; IP address of xx_Bridge.py
txPort = 31103                           ; AMBE frames from xx_Bridge (should m$
rxPort = 31100                           ; AMBE frames from xx_Bridge (should m$
ambeMode = DMR                          ; DMR, DMR_IPSC, DSTAR, NXDN, P25, YSFN$
minTxTimeMS = 2000                      ; Minimum time in MS for hang delay
gatewayDmrId = 3116280                  ; ID to use when transmitting from Anal$
repeaterID = 311628005                     ; ID of source repeater
txTg = 310286                           ; TG to use for all frames received fro$
                                 [ Cancelled ]


On Fri, Jan 25, 2019 at 5:32 PM Steve N4IRS <szingman@...> wrote:
repeaterID can not be the same as gatewayDmrId

On 1/25/19 6:25 PM, K4VL wrote:
> I: 2019-01-25 23:24:10.846 Analog Bridge is starting
> F: 2019-01-25 23:24:10.846 Repeater ID can not be the same as
> subscriber ID
>












Re: System test

Steve N4IRS
 

That is a Pandora's box I no longer wish to open. I would (and did) spend my whole day logged into someones machine. All I can suggest it to start over. Follow the howto exactly. There are stopping points where you test your work before going forward.

Steve


On 1/25/19 8:00 PM, K4VL wrote:
Is it something you can remote in and look at for me sometime?

On Fri, Jan 25, 2019 at 6:59 PM Steve N4IRS <szingman@...> wrote:
No clue.

On 1/25/19 7:58 PM, K4VL wrote:

This is what I get from MMDVM_Bridge. I get no change on Analog_Bridge

M: 2019-01-26 00:56:59.166 DMR Slot 2, received network voice header from K4VL to TG 310286
M: 2019-01-26 00:56:59.881 DMR Talker Alias (Data Format 1, Received 6/20 char): 'K4VL D'
M: 2019-01-26 00:57:00.597 DMR Talker Alias (Data Format 1, Received 13/20 char): 'K4VL DMR ID: '
M: 2019-01-26 00:57:01.077 DMR Slot 2, received network end of voice transmission, 1.9 seconds, 0% packet loss, BER: 0.3%



On Fri, Jan 25, 2019 at 6:55 PM Steve N4IRS <szingman@...> wrote:
OK, with both programs running send traffic through BM. Show me the traffic at MMDVM_Bridge and show me the output from Analog_Bridge at the same time stamp.

On 1/25/19 7:51 PM, K4VL wrote:
Analog_Bridge

I: 2019-01-26 00:48:46.569 Analog Bridge Version 1.1 Wed May 30 11:50:28 EDT 2018
I: 2019-01-26 00:48:46.569 Copyright (C) 2018 DVSwitch, INAD.
I: 2019-01-26 00:48:46.569 Created by Mike N4IRR and Steve N4IRS
I: 2019-01-26 00:48:46.569 Analog Bridge comes with ABSOLUTELY NO WARRANTY
I: 2019-01-26 00:48:46.569
I: 2019-01-26 00:48:46.569 This software is for use on amateur radio networks only,
I: 2019-01-26 00:48:46.569 it is to be used for educational purposes only. Its use on
I: 2019-01-26 00:48:46.569 commercial networks is strictly prohibited.
I: 2019-01-26 00:48:46.569
I: 2019-01-26 00:48:46.569 Analog Bridge is starting
M: 2019-01-26 00:48:46.570 Setting [GENERAL] logLevel -> 2
M: 2019-01-26 00:48:46.570 Setting [GENERAL] exportMetadata -> true
M: 2019-01-26 00:48:46.570 Setting [GENERAL] subscriberFile -> /var/lib/dvswitch/subscriber_ids.csv
M: 2019-01-26 00:48:46.570 Setting [GENERAL] decoderFallBack -> true
M: 2019-01-26 00:48:46.570 Setting [GENERAL] useEmulator -> false
M: 2019-01-26 00:48:46.570 Setting [GENERAL] emulatorAddress -> 127.0.0.1:2470
M: 2019-01-26 00:48:46.570 Setting [GENERAL] outputAudioDevice -> /dev/null
M: 2019-01-26 00:48:46.570 Setting [GENERAL] inputAudioDevice -> /dev/null
M: 2019-01-26 00:48:46.570 Setting [GENERAL] useMicrophone -> false
M: 2019-01-26 00:48:46.570 Setting [GENERAL] useVox -> false
M: 2019-01-26 00:48:46.570 Setting [GENERAL] voxDecay -> 2
M: 2019-01-26 00:48:46.570 Setting [GENERAL] voxTrigger -> 200
M: 2019-01-26 00:48:46.570 Setting [AMBE_AUDIO] address -> 127.0.0.1
M: 2019-01-26 00:48:46.570 Setting [AMBE_AUDIO] txPort -> 31103
M: 2019-01-26 00:48:46.570 Setting [AMBE_AUDIO] rxPort -> 31100
M: 2019-01-26 00:48:46.570 Setting [AMBE_AUDIO] ambeMode -> DMR
M: 2019-01-26 00:48:46.570 Setting [AMBE_AUDIO] minTxTimeMS -> 2000
M: 2019-01-26 00:48:46.570 Setting [AMBE_AUDIO] gatewayDmrId -> 3116280
M: 2019-01-26 00:48:46.570 Setting [AMBE_AUDIO] repeaterID -> 1234567
M: 2019-01-26 00:48:46.570 Setting [AMBE_AUDIO] txTg -> 310286
M: 2019-01-26 00:48:46.570 Setting [AMBE_AUDIO] txTs -> 2
M: 2019-01-26 00:48:46.570 Setting [AMBE_AUDIO] colorCode -> 1
M: 2019-01-26 00:48:46.571 Setting [USRP] address -> 127.0.0.1
M: 2019-01-26 00:48:46.571 Setting [USRP] txPort -> 32001
M: 2019-01-26 00:48:46.571 Setting [USRP] rxPort -> 34001
M: 2019-01-26 00:48:46.571 Setting [USRP] aslAudio -> AUDIO_UNITY
M: 2019-01-26 00:48:46.571 Setting [USRP] agcGain -> -20
M: 2019-01-26 00:48:46.571 Setting [USRP] dmrAudio -> AUDIO_UNITY
M: 2019-01-26 00:48:46.571 Setting [USRP] dmrGain -> 0.35
W: 2019-01-26 00:48:46.571 Using deprecated option "server"
M: 2019-01-26 00:48:46.571 Setting [DV3000] server -> 127.0.0.1
W: 2019-01-26 00:48:46.571 Using deprecated option "port"
M: 2019-01-26 00:48:46.571 Setting [DV3000] port -> 2460
W: 2019-01-26 00:48:46.571 ioctl reset error
W: 2019-01-26 00:48:46.571 ioctl speed error
W: 2019-01-26 00:48:46.571 ioctl stereo error
W: 2019-01-26 00:48:46.571 ioctl setfmt error
M: 2019-01-26 00:48:46.571 Audio In/Out Device: /dev/null
I: 2019-01-26 00:48:46.571 Open UDP listener on 127.0.0.1:31100
I: 2019-01-26 00:48:46.571 Open USRP on 127.0.0.1:32001
M: 2019-01-26 00:48:46.571 Connecting to DV3000 hardware......
W: 2019-01-26 00:48:47.578 DV3000 not found at 127.0.0.1:2460
Project 25 IMBE Encoder/Decoder Fixed-Point implementation
Developed by Pavel Yazev E-mail: pyazev@...
Version 1.0 (c) Copyright 2009
This program comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it
under certain conditions; see the file ``LICENSE'' for details.
I: 2019-01-26 00:48:47.805 Subscriber IDs loaded: 120102
I: 2019-01-26 00:48:47.805 Default extended metadata <K4VL>
W: 2019-01-26 00:48:47.805 Using software MBE decoder version 1.2.3
W: 2019-01-26 00:48:47.805 Using software OP25 IMBE/AMBE vocoder
I: 2019-01-26 00:48:47.805 Starting Analog_Bridge --> USRP thread
I: 2019-01-26 00:48:47.805 Open UDP listener on 127.0.0.1:34001
I: 2019-01-26 00:48:47.805 Starting USRP --> HB_Bridge thread

MMDVM_Bridge

I: 2019-01-26 00:46:57.746 MMDVM_Bridge:
I: 2019-01-26 00:46:57.746 Portions Copyright (C) 2018 DVSwitch, INAD.
I: 2019-01-26 00:46:57.746 Hacks by Mike N4IRR and Steve N4IRS
I: 2019-01-26 00:46:57.746 =
I: 2019-01-26 00:24:42.340 This software is for use on amateur radio networks only,
I: 2019-01-26 00:24:42.340 it is to be used for educational purposes only. Its use on
I: 2019-01-26 00:24:42.340 commercial networks is strictly prohibited.
I: 2019-01-26 00:24:42.340 Copyright(C) 2015-2018 by Jonathan Naylor, G4KLX and others
M: 2019-01-26 00:24:42.340 MMDVM_Bridge-20180423 is starting
M: 2019-01-26 00:24:42.340 Built 13:54:43 May 30 2018 (GitID #9cdea41)
I: 2019-01-26 00:24:42.340 General Parameters
I: 2019-01-26 00:24:42.340     Callsign: K4VL
I: 2019-01-26 00:24:42.340     Id: 3116280
I: 2019-01-26 00:24:42.340     Duplex: no
I: 2019-01-26 00:24:42.340     Timeout: 180s
I: 2019-01-26 00:24:42.340     D-Star: disabled
I: 2019-01-26 00:24:42.340     DMR: enabled
I: 2019-01-26 00:24:42.340     YSF: disabled
I: 2019-01-26 00:24:42.340     P25: disabled
I: 2019-01-26 00:24:42.340     NXDN: disabled
I: 2019-01-26 00:24:42.340 Modem Parameters
I: 2019-01-26 00:24:42.340     Port: /dev/null
I: 2019-01-26 00:24:42.340     RX Invert: no
I: 2019-01-26 00:24:42.340     TX Invert: no
I: 2019-01-26 00:24:42.340     PTT Invert: no
I: 2019-01-26 00:24:42.340     TX Delay: 100ms
I: 2019-01-26 00:24:42.340     RX Offset: 0Hz
I: 2019-01-26 00:24:42.340     TX Offset: 0Hz
I: 2019-01-26 00:24:42.341     RX DC Offset: 0
I: 2019-01-26 00:24:42.341     TX DC Offset: 0
I: 2019-01-26 00:24:42.341     RF Level: 100.0%
I: 2019-01-26 00:24:42.341     DMR Delay: 0 (0.0ms)
I: 2019-01-26 00:24:42.341     RX Level: 50.0%
I: 2019-01-26 00:24:42.341     CW Id TX Level: 50.0%
I: 2019-01-26 00:24:42.341     D-Star TX Level: 50.0%
I: 2019-01-26 00:24:42.341     DMR TX Level: 50.0%
I: 2019-01-26 00:24:42.341     YSF TX Level: 50.0%
I: 2019-01-26 00:24:42.341     P25 TX Level: 50.0%
I: 2019-01-26 00:24:42.341     NXDN TX Level: 50.0%
I: 2019-01-26 00:24:42.341     RX Frequency: 444Hz (444Hz)
I: 2019-01-26 00:24:42.341     TX Frequency: 444Hz (444Hz)
M: 2019-01-26 00:24:42.341 Opening the MMDVM
I: 2019-01-26 00:24:42.341 Display Parameters
I: 2019-01-26 00:24:42.341     Type:
I: 2019-01-26 00:24:42.341 DMR Network Parameters
I: 2019-01-26 00:24:42.341     Address: 3108.repeater.net
I: 2019-01-26 00:24:42.341     Port: 62031
I: 2019-01-26 00:24:42.341     Local: 62032
I: 2019-01-26 00:24:42.341     Jitter: 750ms
I: 2019-01-26 00:24:42.341     Slot 1: disabled
I: 2019-01-26 00:24:42.341     Slot 2: enabled
I: 2019-01-26 00:24:42.341     Mode Hang: 3s
I: 2019-01-26 00:24:42.375 Info Parameters
I: 2019-01-26 00:24:42.375     Callsign: K4VL
I: 2019-01-26 00:24:42.375     RX Frequency: 444Hz
I: 2019-01-26 00:24:42.375     TX Frequency: 444Hz
I: 2019-01-26 00:24:42.375     Power: 1W
I: 2019-01-26 00:24:42.375     Latitude: 36.529999deg N
I: 2019-01-26 00:24:42.375     Longitude: -57.500000deg E
I: 2019-01-26 00:24:42.375     Height: 0m
I: 2019-01-26 00:24:42.375     Location: "Woodlawn, TN"
I: 2019-01-26 00:24:42.375     Description: "MMDVM_Bridge"
I: 2019-01-26 00:24:42.375     URL: ""
M: 2019-01-26 00:24:42.376 DMR, Opening DMR Network
I: 2019-01-26 00:24:42.376 RSSI
I: 2019-01-26 00:24:42.376     Mapping File: RSSI.dat
W: 2019-01-26 00:24:42.376 Cannot open the RSSI data file - RSSI.dat
I: 2019-01-26 00:24:42.376 DMR Id Lookups
I: 2019-01-26 00:24:42.376     File: /var/lib/mmdvm/DMRIds.dat
I: 2019-01-26 00:24:42.376     Reload: 24 hours
I: 2019-01-26 00:24:42.601 Loaded 122585 Ids to the DMR callsign lookup table
I: 2019-01-26 00:24:42.601 DMR RF Parameters
I: 2019-01-26 00:24:42.601     Id: 3116280
I: 2019-01-26 00:24:42.601     Color Code: 1
I: 2019-01-26 00:24:42.601     Self Only: no
I: 2019-01-26 00:24:42.601     Embedded LC Only: yes
I: 2019-01-26 00:24:42.601     Dump Talker Alias Data: no
I: 2019-01-26 00:24:42.601     Prefixes: 0
I: 2019-01-26 00:24:42.601     Call Hang: 3s
I: 2019-01-26 00:24:42.601     TX Hang: 3s
I: 2019-01-26 00:24:42.601     Mode Hang: 10s
M: 2019-01-26 00:24:42.601 DMR, Opening INI file: DVSwitch.ini
I: 2019-01-26 00:24:42.601 Started the DMR Id lookup reload thread
M: 2019-01-26 00:24:42.601 DMR, Setting [DMR] Address -> 127.0.0.1
M: 2019-01-26 00:24:42.601 DMR, Setting [DMR] TXPort -> 31100
M: 2019-01-26 00:24:42.602 DMR, Setting [DMR] RXPort -> 31103
M: 2019-01-26 00:24:42.602 DMR, Setting [DMR] Slot -> 2
M: 2019-01-26 00:24:42.602 DMR, Transmitting on 127.0.0.1:31100 and listening on port 31103.  Result = 1
M: 2019-01-26 00:24:42.602 MMDVM_Bridge-20180423 is running
D: 2019-01-26 00:24:52.642 DMR, Sending authorisation
D: 2019-01-26 00:24:52.678 DMR, Sending configuration
M: 2019-01-26 00:24:52.709 DMR, Logged into the master successfully


On Fri, Jan 25, 2019 at 6:23 PM Steve N4IRS <szingman@...> wrote:
Show me the same thing for MMDVM_Bridge.

On 1/25/19 7:19 PM, K4VL wrote:
I: 2019-01-26 00:19:21.009 Analog Bridge Version 1.1 Wed May 30 11:50:28 EDT 2018
I: 2019-01-26 00:19:21.009 Copyright (C) 2018 DVSwitch, INAD.
I: 2019-01-26 00:19:21.009 Created by Mike N4IRR and Steve N4IRS
I: 2019-01-26 00:19:21.009 Analog Bridge comes with ABSOLUTELY NO WARRANTY
I: 2019-01-26 00:19:21.010
I: 2019-01-26 00:19:21.010 This software is for use on amateur radio networks only,
I: 2019-01-26 00:19:21.010 it is to be used for educational purposes only. Its use on
I: 2019-01-26 00:19:21.010 commercial networks is strictly prohibited.
I: 2019-01-26 00:19:21.010
I: 2019-01-26 00:19:21.010 Analog Bridge is starting
M: 2019-01-26 00:19:21.010 Setting [GENERAL] logLevel -> 2
M: 2019-01-26 00:19:21.010 Setting [GENERAL] exportMetadata -> true
M: 2019-01-26 00:19:21.010 Setting [GENERAL] subscriberFile -> /var/lib/dvswitch/subscriber_ids.csv
M: 2019-01-26 00:19:21.010 Setting [GENERAL] decoderFallBack -> true
M: 2019-01-26 00:19:21.010 Setting [GENERAL] useEmulator -> false
M: 2019-01-26 00:19:21.010 Setting [GENERAL] emulatorAddress -> 127.0.0.1:2470
M: 2019-01-26 00:19:21.010 Setting [GENERAL] outputAudioDevice -> /dev/null
M: 2019-01-26 00:19:21.010 Setting [GENERAL] inputAudioDevice -> /dev/null
M: 2019-01-26 00:19:21.010 Setting [GENERAL] useMicrophone -> false
M: 2019-01-26 00:19:21.010 Setting [GENERAL] useVox -> false
M: 2019-01-26 00:19:21.010 Setting [GENERAL] voxDecay -> 2
M: 2019-01-26 00:19:21.010 Setting [GENERAL] voxTrigger -> 200
M: 2019-01-26 00:19:21.010 Setting [AMBE_AUDIO] address -> 127.0.0.1
M: 2019-01-26 00:19:21.010 Setting [AMBE_AUDIO] txPort -> 31103
M: 2019-01-26 00:19:21.010 Setting [AMBE_AUDIO] rxPort -> 31100
M: 2019-01-26 00:19:21.011 Setting [AMBE_AUDIO] ambeMode -> DMR
M: 2019-01-26 00:19:21.011 Setting [AMBE_AUDIO] minTxTimeMS -> 2000
M: 2019-01-26 00:19:21.011 Setting [AMBE_AUDIO] gatewayDmrId -> 3116280
M: 2019-01-26 00:19:21.011 Setting [AMBE_AUDIO] repeaterID -> 1234567
M: 2019-01-26 00:19:21.011 Setting [AMBE_AUDIO] txTg -> 310286
M: 2019-01-26 00:19:21.011 Setting [AMBE_AUDIO] txTs -> 2
M: 2019-01-26 00:19:21.011 Setting [AMBE_AUDIO] colorCode -> 1
M: 2019-01-26 00:19:21.011 Setting [USRP] address -> 127.0.0.1
M: 2019-01-26 00:19:21.011 Setting [USRP] txPort -> 32001
M: 2019-01-26 00:19:21.011 Setting [USRP] rxPort -> 34001
M: 2019-01-26 00:19:21.011 Setting [USRP] aslAudio -> AUDIO_UNITY
M: 2019-01-26 00:19:21.011 Setting [USRP] agcGain -> -20
M: 2019-01-26 00:19:21.011 Setting [USRP] dmrAudio -> AUDIO_UNITY
M: 2019-01-26 00:19:21.011 Setting [USRP] dmrGain -> 0.35
W: 2019-01-26 00:19:21.011 Using deprecated option "server"
M: 2019-01-26 00:19:21.011 Setting [DV3000] server -> 127.0.0.1
W: 2019-01-26 00:19:21.011 Using deprecated option "port"
M: 2019-01-26 00:19:21.011 Setting [DV3000] port -> 2460
W: 2019-01-26 00:19:21.012 ioctl reset error
W: 2019-01-26 00:19:21.012 ioctl speed error
W: 2019-01-26 00:19:21.012 ioctl stereo error
W: 2019-01-26 00:19:21.012 ioctl setfmt error
M: 2019-01-26 00:19:21.012 Audio In/Out Device: /dev/null
I: 2019-01-26 00:19:21.012 Open UDP listener on 127.0.0.1:31100
I: 2019-01-26 00:19:21.012 Open USRP on 127.0.0.1:32001
M: 2019-01-26 00:19:21.012 Connecting to DV3000 hardware......
W: 2019-01-26 00:19:22.019 DV3000 not found at 127.0.0.1:2460
Project 25 IMBE Encoder/Decoder Fixed-Point implementation
Developed by Pavel Yazev E-mail: pyazev@...
Version 1.0 (c) Copyright 2009
This program comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it
under certain conditions; see the file ``LICENSE'' for details.
I: 2019-01-26 00:19:22.245 Subscriber IDs loaded: 120102
I: 2019-01-26 00:19:22.245 Default extended metadata <K4VL>
W: 2019-01-26 00:19:22.245 Using software MBE decoder version 1.2.3
W: 2019-01-26 00:19:22.245 Using software OP25 IMBE/AMBE vocoder
I: 2019-01-26 00:19:22.245 Starting Analog_Bridge --> USRP thread
I: 2019-01-26 00:19:22.245 Open UDP listener on 127.0.0.1:34001
I: 2019-01-26 00:19:22.246 Starting USRP --> HB_Bridge thread


On Fri, Jan 25, 2019 at 5:57 PM Steve N4IRS <szingman@...> wrote:
No.
Stop the analog_bridge service if it's running.
Make sure it is not running.
ps ax | grep Analog_Bridge

now cd to the Analog_Bridge directory
./Analog_Bridge Analog_Bridge.ini

Copy and paste the COMPLETE output.

Steve

On 1/25/19 6:52 PM, K4VL wrote:
This is from the MMDVM_Bridge

[General]
Callsign=K4VL
Id=3116280
Timeout=180
Duplex=0

Th ID in here is the same as the GatewayDmrID in the Analog_Bridge. Is this the problem?

On Fri, Jan 25, 2019 at 5:46 PM K4VL via Groups.Io <73dek4vl=gmail.com@groups.io> wrote:
This is what I have in the Analog_Bridge.ini file

[AMBE_AUDIO]
address = 127.0.0.1                      ; IP address of xx_Bridge.py
txPort = 31103                           ; AMBE frames from xx_Bridge (should m$
rxPort = 31100                           ; AMBE frames from xx_Bridge (should m$
ambeMode = DMR                          ; DMR, DMR_IPSC, DSTAR, NXDN, P25, YSFN$
minTxTimeMS = 2000                      ; Minimum time in MS for hang delay
gatewayDmrId = 3116280                  ; ID to use when transmitting from Anal$
repeaterID = 311628005                     ; ID of source repeater
txTg = 310286                           ; TG to use for all frames received fro$
                                 [ Cancelled ]


On Fri, Jan 25, 2019 at 5:32 PM Steve N4IRS <szingman@...> wrote:
repeaterID can not be the same as gatewayDmrId

On 1/25/19 6:25 PM, K4VL wrote:
> I: 2019-01-25 23:24:10.846 Analog Bridge is starting
> F: 2019-01-25 23:24:10.846 Repeater ID can not be the same as
> subscriber ID
>












Re: System test

K4VL <73dek4vl@...>
 

Is it something you can remote in and look at for me sometime?

On Fri, Jan 25, 2019 at 6:59 PM Steve N4IRS <szingman@...> wrote:
No clue.

On 1/25/19 7:58 PM, K4VL wrote:

This is what I get from MMDVM_Bridge. I get no change on Analog_Bridge

M: 2019-01-26 00:56:59.166 DMR Slot 2, received network voice header from K4VL to TG 310286
M: 2019-01-26 00:56:59.881 DMR Talker Alias (Data Format 1, Received 6/20 char): 'K4VL D'
M: 2019-01-26 00:57:00.597 DMR Talker Alias (Data Format 1, Received 13/20 char): 'K4VL DMR ID: '
M: 2019-01-26 00:57:01.077 DMR Slot 2, received network end of voice transmission, 1.9 seconds, 0% packet loss, BER: 0.3%



On Fri, Jan 25, 2019 at 6:55 PM Steve N4IRS <szingman@...> wrote:
OK, with both programs running send traffic through BM. Show me the traffic at MMDVM_Bridge and show me the output from Analog_Bridge at the same time stamp.

On 1/25/19 7:51 PM, K4VL wrote:
Analog_Bridge

I: 2019-01-26 00:48:46.569 Analog Bridge Version 1.1 Wed May 30 11:50:28 EDT 2018
I: 2019-01-26 00:48:46.569 Copyright (C) 2018 DVSwitch, INAD.
I: 2019-01-26 00:48:46.569 Created by Mike N4IRR and Steve N4IRS
I: 2019-01-26 00:48:46.569 Analog Bridge comes with ABSOLUTELY NO WARRANTY
I: 2019-01-26 00:48:46.569
I: 2019-01-26 00:48:46.569 This software is for use on amateur radio networks only,
I: 2019-01-26 00:48:46.569 it is to be used for educational purposes only. Its use on
I: 2019-01-26 00:48:46.569 commercial networks is strictly prohibited.
I: 2019-01-26 00:48:46.569
I: 2019-01-26 00:48:46.569 Analog Bridge is starting
M: 2019-01-26 00:48:46.570 Setting [GENERAL] logLevel -> 2
M: 2019-01-26 00:48:46.570 Setting [GENERAL] exportMetadata -> true
M: 2019-01-26 00:48:46.570 Setting [GENERAL] subscriberFile -> /var/lib/dvswitch/subscriber_ids.csv
M: 2019-01-26 00:48:46.570 Setting [GENERAL] decoderFallBack -> true
M: 2019-01-26 00:48:46.570 Setting [GENERAL] useEmulator -> false
M: 2019-01-26 00:48:46.570 Setting [GENERAL] emulatorAddress -> 127.0.0.1:2470
M: 2019-01-26 00:48:46.570 Setting [GENERAL] outputAudioDevice -> /dev/null
M: 2019-01-26 00:48:46.570 Setting [GENERAL] inputAudioDevice -> /dev/null
M: 2019-01-26 00:48:46.570 Setting [GENERAL] useMicrophone -> false
M: 2019-01-26 00:48:46.570 Setting [GENERAL] useVox -> false
M: 2019-01-26 00:48:46.570 Setting [GENERAL] voxDecay -> 2
M: 2019-01-26 00:48:46.570 Setting [GENERAL] voxTrigger -> 200
M: 2019-01-26 00:48:46.570 Setting [AMBE_AUDIO] address -> 127.0.0.1
M: 2019-01-26 00:48:46.570 Setting [AMBE_AUDIO] txPort -> 31103
M: 2019-01-26 00:48:46.570 Setting [AMBE_AUDIO] rxPort -> 31100
M: 2019-01-26 00:48:46.570 Setting [AMBE_AUDIO] ambeMode -> DMR
M: 2019-01-26 00:48:46.570 Setting [AMBE_AUDIO] minTxTimeMS -> 2000
M: 2019-01-26 00:48:46.570 Setting [AMBE_AUDIO] gatewayDmrId -> 3116280
M: 2019-01-26 00:48:46.570 Setting [AMBE_AUDIO] repeaterID -> 1234567
M: 2019-01-26 00:48:46.570 Setting [AMBE_AUDIO] txTg -> 310286
M: 2019-01-26 00:48:46.570 Setting [AMBE_AUDIO] txTs -> 2
M: 2019-01-26 00:48:46.570 Setting [AMBE_AUDIO] colorCode -> 1
M: 2019-01-26 00:48:46.571 Setting [USRP] address -> 127.0.0.1
M: 2019-01-26 00:48:46.571 Setting [USRP] txPort -> 32001
M: 2019-01-26 00:48:46.571 Setting [USRP] rxPort -> 34001
M: 2019-01-26 00:48:46.571 Setting [USRP] aslAudio -> AUDIO_UNITY
M: 2019-01-26 00:48:46.571 Setting [USRP] agcGain -> -20
M: 2019-01-26 00:48:46.571 Setting [USRP] dmrAudio -> AUDIO_UNITY
M: 2019-01-26 00:48:46.571 Setting [USRP] dmrGain -> 0.35
W: 2019-01-26 00:48:46.571 Using deprecated option "server"
M: 2019-01-26 00:48:46.571 Setting [DV3000] server -> 127.0.0.1
W: 2019-01-26 00:48:46.571 Using deprecated option "port"
M: 2019-01-26 00:48:46.571 Setting [DV3000] port -> 2460
W: 2019-01-26 00:48:46.571 ioctl reset error
W: 2019-01-26 00:48:46.571 ioctl speed error
W: 2019-01-26 00:48:46.571 ioctl stereo error
W: 2019-01-26 00:48:46.571 ioctl setfmt error
M: 2019-01-26 00:48:46.571 Audio In/Out Device: /dev/null
I: 2019-01-26 00:48:46.571 Open UDP listener on 127.0.0.1:31100
I: 2019-01-26 00:48:46.571 Open USRP on 127.0.0.1:32001
M: 2019-01-26 00:48:46.571 Connecting to DV3000 hardware......
W: 2019-01-26 00:48:47.578 DV3000 not found at 127.0.0.1:2460
Project 25 IMBE Encoder/Decoder Fixed-Point implementation
Developed by Pavel Yazev E-mail: pyazev@...
Version 1.0 (c) Copyright 2009
This program comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it
under certain conditions; see the file ``LICENSE'' for details.
I: 2019-01-26 00:48:47.805 Subscriber IDs loaded: 120102
I: 2019-01-26 00:48:47.805 Default extended metadata <K4VL>
W: 2019-01-26 00:48:47.805 Using software MBE decoder version 1.2.3
W: 2019-01-26 00:48:47.805 Using software OP25 IMBE/AMBE vocoder
I: 2019-01-26 00:48:47.805 Starting Analog_Bridge --> USRP thread
I: 2019-01-26 00:48:47.805 Open UDP listener on 127.0.0.1:34001
I: 2019-01-26 00:48:47.805 Starting USRP --> HB_Bridge thread

MMDVM_Bridge

I: 2019-01-26 00:46:57.746 MMDVM_Bridge:
I: 2019-01-26 00:46:57.746 Portions Copyright (C) 2018 DVSwitch, INAD.
I: 2019-01-26 00:46:57.746 Hacks by Mike N4IRR and Steve N4IRS
I: 2019-01-26 00:46:57.746 =
I: 2019-01-26 00:24:42.340 This software is for use on amateur radio networks only,
I: 2019-01-26 00:24:42.340 it is to be used for educational purposes only. Its use on
I: 2019-01-26 00:24:42.340 commercial networks is strictly prohibited.
I: 2019-01-26 00:24:42.340 Copyright(C) 2015-2018 by Jonathan Naylor, G4KLX and others
M: 2019-01-26 00:24:42.340 MMDVM_Bridge-20180423 is starting
M: 2019-01-26 00:24:42.340 Built 13:54:43 May 30 2018 (GitID #9cdea41)
I: 2019-01-26 00:24:42.340 General Parameters
I: 2019-01-26 00:24:42.340     Callsign: K4VL
I: 2019-01-26 00:24:42.340     Id: 3116280
I: 2019-01-26 00:24:42.340     Duplex: no
I: 2019-01-26 00:24:42.340     Timeout: 180s
I: 2019-01-26 00:24:42.340     D-Star: disabled
I: 2019-01-26 00:24:42.340     DMR: enabled
I: 2019-01-26 00:24:42.340     YSF: disabled
I: 2019-01-26 00:24:42.340     P25: disabled
I: 2019-01-26 00:24:42.340     NXDN: disabled
I: 2019-01-26 00:24:42.340 Modem Parameters
I: 2019-01-26 00:24:42.340     Port: /dev/null
I: 2019-01-26 00:24:42.340     RX Invert: no
I: 2019-01-26 00:24:42.340     TX Invert: no
I: 2019-01-26 00:24:42.340     PTT Invert: no
I: 2019-01-26 00:24:42.340     TX Delay: 100ms
I: 2019-01-26 00:24:42.340     RX Offset: 0Hz
I: 2019-01-26 00:24:42.340     TX Offset: 0Hz
I: 2019-01-26 00:24:42.341     RX DC Offset: 0
I: 2019-01-26 00:24:42.341     TX DC Offset: 0
I: 2019-01-26 00:24:42.341     RF Level: 100.0%
I: 2019-01-26 00:24:42.341     DMR Delay: 0 (0.0ms)
I: 2019-01-26 00:24:42.341     RX Level: 50.0%
I: 2019-01-26 00:24:42.341     CW Id TX Level: 50.0%
I: 2019-01-26 00:24:42.341     D-Star TX Level: 50.0%
I: 2019-01-26 00:24:42.341     DMR TX Level: 50.0%
I: 2019-01-26 00:24:42.341     YSF TX Level: 50.0%
I: 2019-01-26 00:24:42.341     P25 TX Level: 50.0%
I: 2019-01-26 00:24:42.341     NXDN TX Level: 50.0%
I: 2019-01-26 00:24:42.341     RX Frequency: 444Hz (444Hz)
I: 2019-01-26 00:24:42.341     TX Frequency: 444Hz (444Hz)
M: 2019-01-26 00:24:42.341 Opening the MMDVM
I: 2019-01-26 00:24:42.341 Display Parameters
I: 2019-01-26 00:24:42.341     Type:
I: 2019-01-26 00:24:42.341 DMR Network Parameters
I: 2019-01-26 00:24:42.341     Address: 3108.repeater.net
I: 2019-01-26 00:24:42.341     Port: 62031
I: 2019-01-26 00:24:42.341     Local: 62032
I: 2019-01-26 00:24:42.341     Jitter: 750ms
I: 2019-01-26 00:24:42.341     Slot 1: disabled
I: 2019-01-26 00:24:42.341     Slot 2: enabled
I: 2019-01-26 00:24:42.341     Mode Hang: 3s
I: 2019-01-26 00:24:42.375 Info Parameters
I: 2019-01-26 00:24:42.375     Callsign: K4VL
I: 2019-01-26 00:24:42.375     RX Frequency: 444Hz
I: 2019-01-26 00:24:42.375     TX Frequency: 444Hz
I: 2019-01-26 00:24:42.375     Power: 1W
I: 2019-01-26 00:24:42.375     Latitude: 36.529999deg N
I: 2019-01-26 00:24:42.375     Longitude: -57.500000deg E
I: 2019-01-26 00:24:42.375     Height: 0m
I: 2019-01-26 00:24:42.375     Location: "Woodlawn, TN"
I: 2019-01-26 00:24:42.375     Description: "MMDVM_Bridge"
I: 2019-01-26 00:24:42.375     URL: ""
M: 2019-01-26 00:24:42.376 DMR, Opening DMR Network
I: 2019-01-26 00:24:42.376 RSSI
I: 2019-01-26 00:24:42.376     Mapping File: RSSI.dat
W: 2019-01-26 00:24:42.376 Cannot open the RSSI data file - RSSI.dat
I: 2019-01-26 00:24:42.376 DMR Id Lookups
I: 2019-01-26 00:24:42.376     File: /var/lib/mmdvm/DMRIds.dat
I: 2019-01-26 00:24:42.376     Reload: 24 hours
I: 2019-01-26 00:24:42.601 Loaded 122585 Ids to the DMR callsign lookup table
I: 2019-01-26 00:24:42.601 DMR RF Parameters
I: 2019-01-26 00:24:42.601     Id: 3116280
I: 2019-01-26 00:24:42.601     Color Code: 1
I: 2019-01-26 00:24:42.601     Self Only: no
I: 2019-01-26 00:24:42.601     Embedded LC Only: yes
I: 2019-01-26 00:24:42.601     Dump Talker Alias Data: no
I: 2019-01-26 00:24:42.601     Prefixes: 0
I: 2019-01-26 00:24:42.601     Call Hang: 3s
I: 2019-01-26 00:24:42.601     TX Hang: 3s
I: 2019-01-26 00:24:42.601     Mode Hang: 10s
M: 2019-01-26 00:24:42.601 DMR, Opening INI file: DVSwitch.ini
I: 2019-01-26 00:24:42.601 Started the DMR Id lookup reload thread
M: 2019-01-26 00:24:42.601 DMR, Setting [DMR] Address -> 127.0.0.1
M: 2019-01-26 00:24:42.601 DMR, Setting [DMR] TXPort -> 31100
M: 2019-01-26 00:24:42.602 DMR, Setting [DMR] RXPort -> 31103
M: 2019-01-26 00:24:42.602 DMR, Setting [DMR] Slot -> 2
M: 2019-01-26 00:24:42.602 DMR, Transmitting on 127.0.0.1:31100 and listening on port 31103.  Result = 1
M: 2019-01-26 00:24:42.602 MMDVM_Bridge-20180423 is running
D: 2019-01-26 00:24:52.642 DMR, Sending authorisation
D: 2019-01-26 00:24:52.678 DMR, Sending configuration
M: 2019-01-26 00:24:52.709 DMR, Logged into the master successfully


On Fri, Jan 25, 2019 at 6:23 PM Steve N4IRS <szingman@...> wrote:
Show me the same thing for MMDVM_Bridge.

On 1/25/19 7:19 PM, K4VL wrote:
I: 2019-01-26 00:19:21.009 Analog Bridge Version 1.1 Wed May 30 11:50:28 EDT 2018
I: 2019-01-26 00:19:21.009 Copyright (C) 2018 DVSwitch, INAD.
I: 2019-01-26 00:19:21.009 Created by Mike N4IRR and Steve N4IRS
I: 2019-01-26 00:19:21.009 Analog Bridge comes with ABSOLUTELY NO WARRANTY
I: 2019-01-26 00:19:21.010
I: 2019-01-26 00:19:21.010 This software is for use on amateur radio networks only,
I: 2019-01-26 00:19:21.010 it is to be used for educational purposes only. Its use on
I: 2019-01-26 00:19:21.010 commercial networks is strictly prohibited.
I: 2019-01-26 00:19:21.010
I: 2019-01-26 00:19:21.010 Analog Bridge is starting
M: 2019-01-26 00:19:21.010 Setting [GENERAL] logLevel -> 2
M: 2019-01-26 00:19:21.010 Setting [GENERAL] exportMetadata -> true
M: 2019-01-26 00:19:21.010 Setting [GENERAL] subscriberFile -> /var/lib/dvswitch/subscriber_ids.csv
M: 2019-01-26 00:19:21.010 Setting [GENERAL] decoderFallBack -> true
M: 2019-01-26 00:19:21.010 Setting [GENERAL] useEmulator -> false
M: 2019-01-26 00:19:21.010 Setting [GENERAL] emulatorAddress -> 127.0.0.1:2470
M: 2019-01-26 00:19:21.010 Setting [GENERAL] outputAudioDevice -> /dev/null
M: 2019-01-26 00:19:21.010 Setting [GENERAL] inputAudioDevice -> /dev/null
M: 2019-01-26 00:19:21.010 Setting [GENERAL] useMicrophone -> false
M: 2019-01-26 00:19:21.010 Setting [GENERAL] useVox -> false
M: 2019-01-26 00:19:21.010 Setting [GENERAL] voxDecay -> 2
M: 2019-01-26 00:19:21.010 Setting [GENERAL] voxTrigger -> 200
M: 2019-01-26 00:19:21.010 Setting [AMBE_AUDIO] address -> 127.0.0.1
M: 2019-01-26 00:19:21.010 Setting [AMBE_AUDIO] txPort -> 31103
M: 2019-01-26 00:19:21.010 Setting [AMBE_AUDIO] rxPort -> 31100
M: 2019-01-26 00:19:21.011 Setting [AMBE_AUDIO] ambeMode -> DMR
M: 2019-01-26 00:19:21.011 Setting [AMBE_AUDIO] minTxTimeMS -> 2000
M: 2019-01-26 00:19:21.011 Setting [AMBE_AUDIO] gatewayDmrId -> 3116280
M: 2019-01-26 00:19:21.011 Setting [AMBE_AUDIO] repeaterID -> 1234567
M: 2019-01-26 00:19:21.011 Setting [AMBE_AUDIO] txTg -> 310286
M: 2019-01-26 00:19:21.011 Setting [AMBE_AUDIO] txTs -> 2
M: 2019-01-26 00:19:21.011 Setting [AMBE_AUDIO] colorCode -> 1
M: 2019-01-26 00:19:21.011 Setting [USRP] address -> 127.0.0.1
M: 2019-01-26 00:19:21.011 Setting [USRP] txPort -> 32001
M: 2019-01-26 00:19:21.011 Setting [USRP] rxPort -> 34001
M: 2019-01-26 00:19:21.011 Setting [USRP] aslAudio -> AUDIO_UNITY
M: 2019-01-26 00:19:21.011 Setting [USRP] agcGain -> -20
M: 2019-01-26 00:19:21.011 Setting [USRP] dmrAudio -> AUDIO_UNITY
M: 2019-01-26 00:19:21.011 Setting [USRP] dmrGain -> 0.35
W: 2019-01-26 00:19:21.011 Using deprecated option "server"
M: 2019-01-26 00:19:21.011 Setting [DV3000] server -> 127.0.0.1
W: 2019-01-26 00:19:21.011 Using deprecated option "port"
M: 2019-01-26 00:19:21.011 Setting [DV3000] port -> 2460
W: 2019-01-26 00:19:21.012 ioctl reset error
W: 2019-01-26 00:19:21.012 ioctl speed error
W: 2019-01-26 00:19:21.012 ioctl stereo error
W: 2019-01-26 00:19:21.012 ioctl setfmt error
M: 2019-01-26 00:19:21.012 Audio In/Out Device: /dev/null
I: 2019-01-26 00:19:21.012 Open UDP listener on 127.0.0.1:31100
I: 2019-01-26 00:19:21.012 Open USRP on 127.0.0.1:32001
M: 2019-01-26 00:19:21.012 Connecting to DV3000 hardware......
W: 2019-01-26 00:19:22.019 DV3000 not found at 127.0.0.1:2460
Project 25 IMBE Encoder/Decoder Fixed-Point implementation
Developed by Pavel Yazev E-mail: pyazev@...
Version 1.0 (c) Copyright 2009
This program comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it
under certain conditions; see the file ``LICENSE'' for details.
I: 2019-01-26 00:19:22.245 Subscriber IDs loaded: 120102
I: 2019-01-26 00:19:22.245 Default extended metadata <K4VL>
W: 2019-01-26 00:19:22.245 Using software MBE decoder version 1.2.3
W: 2019-01-26 00:19:22.245 Using software OP25 IMBE/AMBE vocoder
I: 2019-01-26 00:19:22.245 Starting Analog_Bridge --> USRP thread
I: 2019-01-26 00:19:22.245 Open UDP listener on 127.0.0.1:34001
I: 2019-01-26 00:19:22.246 Starting USRP --> HB_Bridge thread


On Fri, Jan 25, 2019 at 5:57 PM Steve N4IRS <szingman@...> wrote:
No.
Stop the analog_bridge service if it's running.
Make sure it is not running.
ps ax | grep Analog_Bridge

now cd to the Analog_Bridge directory
./Analog_Bridge Analog_Bridge.ini

Copy and paste the COMPLETE output.

Steve

On 1/25/19 6:52 PM, K4VL wrote:
This is from the MMDVM_Bridge

[General]
Callsign=K4VL
Id=3116280
Timeout=180
Duplex=0

Th ID in here is the same as the GatewayDmrID in the Analog_Bridge. Is this the problem?

On Fri, Jan 25, 2019 at 5:46 PM K4VL via Groups.Io <73dek4vl=gmail.com@groups.io> wrote:
This is what I have in the Analog_Bridge.ini file

[AMBE_AUDIO]
address = 127.0.0.1                      ; IP address of xx_Bridge.py
txPort = 31103                           ; AMBE frames from xx_Bridge (should m$
rxPort = 31100                           ; AMBE frames from xx_Bridge (should m$
ambeMode = DMR                          ; DMR, DMR_IPSC, DSTAR, NXDN, P25, YSFN$
minTxTimeMS = 2000                      ; Minimum time in MS for hang delay
gatewayDmrId = 3116280                  ; ID to use when transmitting from Anal$
repeaterID = 311628005                     ; ID of source repeater
txTg = 310286                           ; TG to use for all frames received fro$
                                 [ Cancelled ]


On Fri, Jan 25, 2019 at 5:32 PM Steve N4IRS <szingman@...> wrote:
repeaterID can not be the same as gatewayDmrId

On 1/25/19 6:25 PM, K4VL wrote:
> I: 2019-01-25 23:24:10.846 Analog Bridge is starting
> F: 2019-01-25 23:24:10.846 Repeater ID can not be the same as
> subscriber ID
>










7481 - 7500 of 10557