Date   
Re: MMDVM_Bridge : connect with suffix other than -B ?

EA4GAX - Sergio
 

Ok, thank you for the answerd.

Re: Blog with P25<->DMR Info

 

Has anyone had any luck getting this type of bridge setup?

I can't seem to get working. I think my analog_bridge_p25 is the problem it never shows any traffic after it's running.

I've gone by the 927 blog without any luck.


On Thu, Jan 31, 2019 at 3:07 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
i did.

I made another change here are the current logs and ini's it actually looks like everything is working but the p25 dashboard does not show traffice and the nxdn dashboard do not show i'm keying up from allstar.



On Thu, Jan 31, 2019 at 2:36 PM Steve N4IRS <szingman@...> wrote:
 Russell,
Have you started at one end and tested each program one at a time in the foreground?
BTW, you can include a zip file with your message. That way someone does not have to go to an external site just to get the zip file.

Steve

On 1/31/2019 3:26 PM, Russell, KV4S wrote:
Well, I got the P25 bridge uniquely named.
hmm it still doesn't appear to be bridged?

Lates logs and inis: https://we.tl/t-wIx3y9gFLe

not sure what i'm missing?

On Wed, Jan 30, 2019 at 4:38 PM <mike@...> wrote:
OK - a couple of things... your Analog Bridges need to be uniquely named, and have uniquely named .ini files. The .ini files are different for each as well. Review the Build and Configure sections on blog.927.org for how to create the needed files and tweak the ini files. 

Also - In the log snippet you just posted, P25 is the indicated mode, but you're supplying DMR-ID info. No need to do that for the P25 ini file. 
Also v2.0: The DMR-ID in your log has an extra digit in it - 313666507 - which might be causing the BM master connection issues if that's what you're using elsewhere in the setup. 

On Wed, Jan 30, 2019 at 2:28 PM Russell, KV4S <russelljthomas@...> wrote:
I: 2019-01-30 22:25:57.822 Analog Bridge is starting
M: 2019-01-30 22:25:57.823 Setting [GENERAL] logLevel -> 2
M: 2019-01-30 22:25:57.823 Setting [GENERAL] exportMetadata -> true
M: 2019-01-30 22:25:57.823 Setting [GENERAL] subscriberFile -> /var/lib/dvswitch/subscriber_ids.csv
M: 2019-01-30 22:25:57.823 Setting [GENERAL] decoderFallBack -> true
M: 2019-01-30 22:25:57.823 Setting [GENERAL] useEmulator -> true
M: 2019-01-30 22:25:57.824 Setting [GENERAL] emulatorAddress -> 127.0.0.1:2470
M: 2019-01-30 22:25:57.824 Setting [GENERAL] outputAudioDevice -> /dev/null
M: 2019-01-30 22:25:57.824 Setting [GENERAL] inputAudioDevice -> /dev/null
M: 2019-01-30 22:25:57.824 Setting [GENERAL] useMicrophone -> false
M: 2019-01-30 22:25:57.824 Setting [GENERAL] useVox -> false
M: 2019-01-30 22:25:57.824 Setting [GENERAL] voxDecay -> 2
M: 2019-01-30 22:25:57.824 Setting [GENERAL] voxTrigger -> 200
W: 2019-01-30 22:25:57.824 Using deprecated option "server"
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] server -> 127.0.0.1
W: 2019-01-30 22:25:57.824 Using deprecated option "fromDMRPort"
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] fromDMRPort -> 34100
W: 2019-01-30 22:25:57.824 Using deprecated option "toDMRPort"
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] toDMRPort -> 34103
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] ambeMode -> P25
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] minTxTimeMS -> 2000
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] gatewayDmrId -> 3136665
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] repeaterID -> 313666507
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] txTg -> 31777
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] txTs -> 2
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] colorCode -> 1
W: 2019-01-30 22:25:57.824 Using deprecated option "server"
M: 2019-01-30 22:25:57.824 Setting [USRP] server -> 127.0.0.1
W: 2019-01-30 22:25:57.824 Using deprecated option "toASLPort"
M: 2019-01-30 22:25:57.824 Setting [USRP] toASLPort -> 34001
W: 2019-01-30 22:25:57.824 Using deprecated option "fromASLPort"
M: 2019-01-30 22:25:57.824 Setting [USRP] fromASLPort -> 32001
M: 2019-01-30 22:25:57.824 Setting [USRP] aslAudio -> AUDIO_USE_GAIN
M: 2019-01-30 22:25:57.824 Setting [USRP] agcGain -> 5.0
M: 2019-01-30 22:25:57.824 Setting [USRP] dmrAudio -> AUDIO_USE_GAIN
M: 2019-01-30 22:25:57.824 Setting [USRP] dmrGain -> 0.17
W: 2019-01-30 22:25:57.824 Using deprecated option "server"
M: 2019-01-30 22:25:57.824 Setting [DV3000] server -> 127.0.0.1
W: 2019-01-30 22:25:57.824 Using deprecated option "port"
M: 2019-01-30 22:25:57.824 Setting [DV3000] port -> 2460
W: 2019-01-30 22:25:57.824 ioctl reset error 
W: 2019-01-30 22:25:57.824 ioctl speed error 
W: 2019-01-30 22:25:57.824 ioctl stereo error 
W: 2019-01-30 22:25:57.824 ioctl setfmt error 
M: 2019-01-30 22:25:57.824 Audio In/Out Device: /dev/null
I: 2019-01-30 22:25:57.824 Open UDP listener on 127.0.0.1:34100
I: 2019-01-30 22:25:57.824 Open USRP on 127.0.0.1:34001
M: 2019-01-30 22:25:57.824 Connecting to DV3000 hardware......
W: 2019-01-30 22:25:58.845 DV3000 not found at 127.0.0.1:2460
I: 2019-01-30 22:25:59.455 Subscriber IDs loaded: 120633
I: 2019-01-30 22:25:59.455 Default extended metadata <K2HZE>
I: 2019-01-30 22:25:59.455 Connecting to emulator on host 127.0.0.1:2470
W: 2019-01-30 22:25:59.455 Using software MBE decoder version 1.2.3
W: 2019-01-30 22:25:59.455 Using software OP25 IMBE/AMBE vocoder
I: 2019-01-30 22:25:59.456 Starting Analog_Bridge --> USRP thread
I: 2019-01-30 22:25:59.459 Open UDP listener on 127.0.0.1:32001
I: 2019-01-30 22:25:59.459 Starting USRP --> IPSC_Bridge thread

On Wed, Jan 30, 2019 at 4:27 PM Russell Thomas <russelljthomas@...> wrote:
never mind, i think I fixed that. 

let me keep testing and see if i get further.

On Wed, Jan 30, 2019 at 4:21 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
great catch i had got interrupted and did not finish setting up the second analog bridge's service file to make it start.
I started it in the foreground and it's getting this?:  2019-01-30 22:16:18.817 Repeater ID can not be the same as subscriber ID

where can i find the P25Hosts.txt and what should it be set to?


On Wed, Jan 30, 2019 at 3:49 PM <mike@...> wrote:
According the logs, you only have one instance of Analog_Bridge running. You need 2. One for DMR and one for P25 (or perhaps didn't include that log)

I also see that you're loading 17 P25 Reflectors. While probably not critical, your P25Hosts.txt only needs the localhost reflector information, as it isn't meant to connect to others... 

Network Access Control (NAC) is analogous to CTCSS for P25. 

On Wed, Jan 30, 2019 at 1:12 PM Russell, KV4S <russelljthomas@...> wrote:
I have been following the blog working on a Bridge for a fellow in NY and I don't think somethings is linked up correctly but nothing is jumping out at me in the logs.

Logs are located here for review: https://we.tl/t-LYRjUm1WpC 

let me know what i'm missing.

Also, what is NAC? 

On Tue, Jan 29, 2019 at 11:30 AM Steve N4IRS <szingman@...> wrote:
Make these both true.

On 1/29/2019 12:19 PM, Kevin N9OIG wrote:
> M: 2019-01-29 17:11:35.760 Setting [GENERAL] decoderFallBack -> false
> M: 2019-01-29 17:11:35.760 Setting [GENERAL] useEmulator -> false





Re: Blog with P25<->DMR Info

Steve N4IRS
 

I hate to say it, I have built a few. They work. Same concept as all the rest. Enable the mode in MMDVM_Bridge and Analog_Bridge and match the ports.

On 2/12/2019 1:16 PM, Russell, KV4S wrote:
Has anyone had any luck getting this type of bridge setup?

I can't seem to get working. I think my analog_bridge_p25 is the problem it never shows any traffic after it's running.

I've gone by the 927 blog without any luck.

On Thu, Jan 31, 2019 at 3:07 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
i did.

I made another change here are the current logs and ini's it actually looks like everything is working but the p25 dashboard does not show traffice and the nxdn dashboard do not show i'm keying up from allstar.



On Thu, Jan 31, 2019 at 2:36 PM Steve N4IRS <szingman@...> wrote:
 Russell,
Have you started at one end and tested each program one at a time in the foreground?
BTW, you can include a zip file with your message. That way someone does not have to go to an external site just to get the zip file.

Steve

On 1/31/2019 3:26 PM, Russell, KV4S wrote:
Well, I got the P25 bridge uniquely named.
hmm it still doesn't appear to be bridged?

Lates logs and inis: https://we.tl/t-wIx3y9gFLe

not sure what i'm missing?

On Wed, Jan 30, 2019 at 4:38 PM <mike@...> wrote:
OK - a couple of things... your Analog Bridges need to be uniquely named, and have uniquely named .ini files. The .ini files are different for each as well. Review the Build and Configure sections on blog.927.org for how to create the needed files and tweak the ini files. 

Also - In the log snippet you just posted, P25 is the indicated mode, but you're supplying DMR-ID info. No need to do that for the P25 ini file. 
Also v2.0: The DMR-ID in your log has an extra digit in it - 313666507 - which might be causing the BM master connection issues if that's what you're using elsewhere in the setup. 

On Wed, Jan 30, 2019 at 2:28 PM Russell, KV4S <russelljthomas@...> wrote:
I: 2019-01-30 22:25:57.822 Analog Bridge is starting
M: 2019-01-30 22:25:57.823 Setting [GENERAL] logLevel -> 2
M: 2019-01-30 22:25:57.823 Setting [GENERAL] exportMetadata -> true
M: 2019-01-30 22:25:57.823 Setting [GENERAL] subscriberFile -> /var/lib/dvswitch/subscriber_ids.csv
M: 2019-01-30 22:25:57.823 Setting [GENERAL] decoderFallBack -> true
M: 2019-01-30 22:25:57.823 Setting [GENERAL] useEmulator -> true
M: 2019-01-30 22:25:57.824 Setting [GENERAL] emulatorAddress -> 127.0.0.1:2470
M: 2019-01-30 22:25:57.824 Setting [GENERAL] outputAudioDevice -> /dev/null
M: 2019-01-30 22:25:57.824 Setting [GENERAL] inputAudioDevice -> /dev/null
M: 2019-01-30 22:25:57.824 Setting [GENERAL] useMicrophone -> false
M: 2019-01-30 22:25:57.824 Setting [GENERAL] useVox -> false
M: 2019-01-30 22:25:57.824 Setting [GENERAL] voxDecay -> 2
M: 2019-01-30 22:25:57.824 Setting [GENERAL] voxTrigger -> 200
W: 2019-01-30 22:25:57.824 Using deprecated option "server"
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] server -> 127.0.0.1
W: 2019-01-30 22:25:57.824 Using deprecated option "fromDMRPort"
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] fromDMRPort -> 34100
W: 2019-01-30 22:25:57.824 Using deprecated option "toDMRPort"
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] toDMRPort -> 34103
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] ambeMode -> P25
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] minTxTimeMS -> 2000
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] gatewayDmrId -> 3136665
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] repeaterID -> 313666507
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] txTg -> 31777
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] txTs -> 2
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] colorCode -> 1
W: 2019-01-30 22:25:57.824 Using deprecated option "server"
M: 2019-01-30 22:25:57.824 Setting [USRP] server -> 127.0.0.1
W: 2019-01-30 22:25:57.824 Using deprecated option "toASLPort"
M: 2019-01-30 22:25:57.824 Setting [USRP] toASLPort -> 34001
W: 2019-01-30 22:25:57.824 Using deprecated option "fromASLPort"
M: 2019-01-30 22:25:57.824 Setting [USRP] fromASLPort -> 32001
M: 2019-01-30 22:25:57.824 Setting [USRP] aslAudio -> AUDIO_USE_GAIN
M: 2019-01-30 22:25:57.824 Setting [USRP] agcGain -> 5.0
M: 2019-01-30 22:25:57.824 Setting [USRP] dmrAudio -> AUDIO_USE_GAIN
M: 2019-01-30 22:25:57.824 Setting [USRP] dmrGain -> 0.17
W: 2019-01-30 22:25:57.824 Using deprecated option "server"
M: 2019-01-30 22:25:57.824 Setting [DV3000] server -> 127.0.0.1
W: 2019-01-30 22:25:57.824 Using deprecated option "port"
M: 2019-01-30 22:25:57.824 Setting [DV3000] port -> 2460
W: 2019-01-30 22:25:57.824 ioctl reset error 
W: 2019-01-30 22:25:57.824 ioctl speed error 
W: 2019-01-30 22:25:57.824 ioctl stereo error 
W: 2019-01-30 22:25:57.824 ioctl setfmt error 
M: 2019-01-30 22:25:57.824 Audio In/Out Device: /dev/null
I: 2019-01-30 22:25:57.824 Open UDP listener on 127.0.0.1:34100
I: 2019-01-30 22:25:57.824 Open USRP on 127.0.0.1:34001
M: 2019-01-30 22:25:57.824 Connecting to DV3000 hardware......
W: 2019-01-30 22:25:58.845 DV3000 not found at 127.0.0.1:2460
I: 2019-01-30 22:25:59.455 Subscriber IDs loaded: 120633
I: 2019-01-30 22:25:59.455 Default extended metadata <K2HZE>
I: 2019-01-30 22:25:59.455 Connecting to emulator on host 127.0.0.1:2470
W: 2019-01-30 22:25:59.455 Using software MBE decoder version 1.2.3
W: 2019-01-30 22:25:59.455 Using software OP25 IMBE/AMBE vocoder
I: 2019-01-30 22:25:59.456 Starting Analog_Bridge --> USRP thread
I: 2019-01-30 22:25:59.459 Open UDP listener on 127.0.0.1:32001
I: 2019-01-30 22:25:59.459 Starting USRP --> IPSC_Bridge thread

On Wed, Jan 30, 2019 at 4:27 PM Russell Thomas <russelljthomas@...> wrote:
never mind, i think I fixed that. 

let me keep testing and see if i get further.

On Wed, Jan 30, 2019 at 4:21 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
great catch i had got interrupted and did not finish setting up the second analog bridge's service file to make it start.
I started it in the foreground and it's getting this?:  2019-01-30 22:16:18.817 Repeater ID can not be the same as subscriber ID

where can i find the P25Hosts.txt and what should it be set to?


On Wed, Jan 30, 2019 at 3:49 PM <mike@...> wrote:
According the logs, you only have one instance of Analog_Bridge running. You need 2. One for DMR and one for P25 (or perhaps didn't include that log)

I also see that you're loading 17 P25 Reflectors. While probably not critical, your P25Hosts.txt only needs the localhost reflector information, as it isn't meant to connect to others... 

Network Access Control (NAC) is analogous to CTCSS for P25. 

On Wed, Jan 30, 2019 at 1:12 PM Russell, KV4S <russelljthomas@...> wrote:
I have been following the blog working on a Bridge for a fellow in NY and I don't think somethings is linked up correctly but nothing is jumping out at me in the logs.

Logs are located here for review: https://we.tl/t-LYRjUm1WpC 

let me know what i'm missing.

Also, what is NAC? 

On Tue, Jan 29, 2019 at 11:30 AM Steve N4IRS <szingman@...> wrote:
Make these both true.

On 1/29/2019 12:19 PM, Kevin N9OIG wrote:
> M: 2019-01-29 17:11:35.760 Setting [GENERAL] decoderFallBack -> false
> M: 2019-01-29 17:11:35.760 Setting [GENERAL] useEmulator -> false






Re: Blog with P25<->DMR Info

 

Steve,
I have build the simple YSF to DMR successfully like this guide shows:

can the same be done with P25?
I'm just curious as the blog said i needed P25Gateway to make it work? 


On Tue, Feb 12, 2019 at 12:19 PM Steve N4IRS <szingman@...> wrote:
I hate to say it, I have built a few. They work. Same concept as all the rest. Enable the mode in MMDVM_Bridge and Analog_Bridge and match the ports.

On 2/12/2019 1:16 PM, Russell, KV4S wrote:
Has anyone had any luck getting this type of bridge setup?

I can't seem to get working. I think my analog_bridge_p25 is the problem it never shows any traffic after it's running.

I've gone by the 927 blog without any luck.

On Thu, Jan 31, 2019 at 3:07 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
i did.

I made another change here are the current logs and ini's it actually looks like everything is working but the p25 dashboard does not show traffice and the nxdn dashboard do not show i'm keying up from allstar.



On Thu, Jan 31, 2019 at 2:36 PM Steve N4IRS <szingman@...> wrote:
 Russell,
Have you started at one end and tested each program one at a time in the foreground?
BTW, you can include a zip file with your message. That way someone does not have to go to an external site just to get the zip file.

Steve

On 1/31/2019 3:26 PM, Russell, KV4S wrote:
Well, I got the P25 bridge uniquely named.
hmm it still doesn't appear to be bridged?

Lates logs and inis: https://we.tl/t-wIx3y9gFLe

not sure what i'm missing?

On Wed, Jan 30, 2019 at 4:38 PM <mike@...> wrote:
OK - a couple of things... your Analog Bridges need to be uniquely named, and have uniquely named .ini files. The .ini files are different for each as well. Review the Build and Configure sections on blog.927.org for how to create the needed files and tweak the ini files. 

Also - In the log snippet you just posted, P25 is the indicated mode, but you're supplying DMR-ID info. No need to do that for the P25 ini file. 
Also v2.0: The DMR-ID in your log has an extra digit in it - 313666507 - which might be causing the BM master connection issues if that's what you're using elsewhere in the setup. 

On Wed, Jan 30, 2019 at 2:28 PM Russell, KV4S <russelljthomas@...> wrote:
I: 2019-01-30 22:25:57.822 Analog Bridge is starting
M: 2019-01-30 22:25:57.823 Setting [GENERAL] logLevel -> 2
M: 2019-01-30 22:25:57.823 Setting [GENERAL] exportMetadata -> true
M: 2019-01-30 22:25:57.823 Setting [GENERAL] subscriberFile -> /var/lib/dvswitch/subscriber_ids.csv
M: 2019-01-30 22:25:57.823 Setting [GENERAL] decoderFallBack -> true
M: 2019-01-30 22:25:57.823 Setting [GENERAL] useEmulator -> true
M: 2019-01-30 22:25:57.824 Setting [GENERAL] emulatorAddress -> 127.0.0.1:2470
M: 2019-01-30 22:25:57.824 Setting [GENERAL] outputAudioDevice -> /dev/null
M: 2019-01-30 22:25:57.824 Setting [GENERAL] inputAudioDevice -> /dev/null
M: 2019-01-30 22:25:57.824 Setting [GENERAL] useMicrophone -> false
M: 2019-01-30 22:25:57.824 Setting [GENERAL] useVox -> false
M: 2019-01-30 22:25:57.824 Setting [GENERAL] voxDecay -> 2
M: 2019-01-30 22:25:57.824 Setting [GENERAL] voxTrigger -> 200
W: 2019-01-30 22:25:57.824 Using deprecated option "server"
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] server -> 127.0.0.1
W: 2019-01-30 22:25:57.824 Using deprecated option "fromDMRPort"
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] fromDMRPort -> 34100
W: 2019-01-30 22:25:57.824 Using deprecated option "toDMRPort"
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] toDMRPort -> 34103
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] ambeMode -> P25
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] minTxTimeMS -> 2000
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] gatewayDmrId -> 3136665
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] repeaterID -> 313666507
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] txTg -> 31777
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] txTs -> 2
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] colorCode -> 1
W: 2019-01-30 22:25:57.824 Using deprecated option "server"
M: 2019-01-30 22:25:57.824 Setting [USRP] server -> 127.0.0.1
W: 2019-01-30 22:25:57.824 Using deprecated option "toASLPort"
M: 2019-01-30 22:25:57.824 Setting [USRP] toASLPort -> 34001
W: 2019-01-30 22:25:57.824 Using deprecated option "fromASLPort"
M: 2019-01-30 22:25:57.824 Setting [USRP] fromASLPort -> 32001
M: 2019-01-30 22:25:57.824 Setting [USRP] aslAudio -> AUDIO_USE_GAIN
M: 2019-01-30 22:25:57.824 Setting [USRP] agcGain -> 5.0
M: 2019-01-30 22:25:57.824 Setting [USRP] dmrAudio -> AUDIO_USE_GAIN
M: 2019-01-30 22:25:57.824 Setting [USRP] dmrGain -> 0.17
W: 2019-01-30 22:25:57.824 Using deprecated option "server"
M: 2019-01-30 22:25:57.824 Setting [DV3000] server -> 127.0.0.1
W: 2019-01-30 22:25:57.824 Using deprecated option "port"
M: 2019-01-30 22:25:57.824 Setting [DV3000] port -> 2460
W: 2019-01-30 22:25:57.824 ioctl reset error 
W: 2019-01-30 22:25:57.824 ioctl speed error 
W: 2019-01-30 22:25:57.824 ioctl stereo error 
W: 2019-01-30 22:25:57.824 ioctl setfmt error 
M: 2019-01-30 22:25:57.824 Audio In/Out Device: /dev/null
I: 2019-01-30 22:25:57.824 Open UDP listener on 127.0.0.1:34100
I: 2019-01-30 22:25:57.824 Open USRP on 127.0.0.1:34001
M: 2019-01-30 22:25:57.824 Connecting to DV3000 hardware......
W: 2019-01-30 22:25:58.845 DV3000 not found at 127.0.0.1:2460
I: 2019-01-30 22:25:59.455 Subscriber IDs loaded: 120633
I: 2019-01-30 22:25:59.455 Default extended metadata <K2HZE>
I: 2019-01-30 22:25:59.455 Connecting to emulator on host 127.0.0.1:2470
W: 2019-01-30 22:25:59.455 Using software MBE decoder version 1.2.3
W: 2019-01-30 22:25:59.455 Using software OP25 IMBE/AMBE vocoder
I: 2019-01-30 22:25:59.456 Starting Analog_Bridge --> USRP thread
I: 2019-01-30 22:25:59.459 Open UDP listener on 127.0.0.1:32001
I: 2019-01-30 22:25:59.459 Starting USRP --> IPSC_Bridge thread

On Wed, Jan 30, 2019 at 4:27 PM Russell Thomas <russelljthomas@...> wrote:
never mind, i think I fixed that. 

let me keep testing and see if i get further.

On Wed, Jan 30, 2019 at 4:21 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
great catch i had got interrupted and did not finish setting up the second analog bridge's service file to make it start.
I started it in the foreground and it's getting this?:  2019-01-30 22:16:18.817 Repeater ID can not be the same as subscriber ID

where can i find the P25Hosts.txt and what should it be set to?


On Wed, Jan 30, 2019 at 3:49 PM <mike@...> wrote:
According the logs, you only have one instance of Analog_Bridge running. You need 2. One for DMR and one for P25 (or perhaps didn't include that log)

I also see that you're loading 17 P25 Reflectors. While probably not critical, your P25Hosts.txt only needs the localhost reflector information, as it isn't meant to connect to others... 

Network Access Control (NAC) is analogous to CTCSS for P25. 

On Wed, Jan 30, 2019 at 1:12 PM Russell, KV4S <russelljthomas@...> wrote:
I have been following the blog working on a Bridge for a fellow in NY and I don't think somethings is linked up correctly but nothing is jumping out at me in the logs.

Logs are located here for review: https://we.tl/t-LYRjUm1WpC 

let me know what i'm missing.

Also, what is NAC? 

On Tue, Jan 29, 2019 at 11:30 AM Steve N4IRS <szingman@...> wrote:
Make these both true.

On 1/29/2019 12:19 PM, Kevin N9OIG wrote:
> M: 2019-01-29 17:11:35.760 Setting [GENERAL] decoderFallBack -> false
> M: 2019-01-29 17:11:35.760 Setting [GENERAL] useEmulator -> false






Re: Blog with P25<->DMR Info

 

Or can you zip and send files from a working system I can compare to?
I must be missing something really silly.

On Tue, Feb 12, 2019, 12:26 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io wrote:
Steve,
I have build the simple YSF to DMR successfully like this guide shows:

can the same be done with P25?
I'm just curious as the blog said i needed P25Gateway to make it work? 

On Tue, Feb 12, 2019 at 12:19 PM Steve N4IRS <szingman@...> wrote:
I hate to say it, I have built a few. They work. Same concept as all the rest. Enable the mode in MMDVM_Bridge and Analog_Bridge and match the ports.

On 2/12/2019 1:16 PM, Russell, KV4S wrote:
Has anyone had any luck getting this type of bridge setup?

I can't seem to get working. I think my analog_bridge_p25 is the problem it never shows any traffic after it's running.

I've gone by the 927 blog without any luck.

On Thu, Jan 31, 2019 at 3:07 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
i did.

I made another change here are the current logs and ini's it actually looks like everything is working but the p25 dashboard does not show traffice and the nxdn dashboard do not show i'm keying up from allstar.



On Thu, Jan 31, 2019 at 2:36 PM Steve N4IRS <szingman@...> wrote:
 Russell,
Have you started at one end and tested each program one at a time in the foreground?
BTW, you can include a zip file with your message. That way someone does not have to go to an external site just to get the zip file.

Steve

On 1/31/2019 3:26 PM, Russell, KV4S wrote:
Well, I got the P25 bridge uniquely named.
hmm it still doesn't appear to be bridged?

Lates logs and inis: https://we.tl/t-wIx3y9gFLe

not sure what i'm missing?

On Wed, Jan 30, 2019 at 4:38 PM <mike@...> wrote:
OK - a couple of things... your Analog Bridges need to be uniquely named, and have uniquely named .ini files. The .ini files are different for each as well. Review the Build and Configure sections on blog.927.org for how to create the needed files and tweak the ini files. 

Also - In the log snippet you just posted, P25 is the indicated mode, but you're supplying DMR-ID info. No need to do that for the P25 ini file. 
Also v2.0: The DMR-ID in your log has an extra digit in it - 313666507 - which might be causing the BM master connection issues if that's what you're using elsewhere in the setup. 

On Wed, Jan 30, 2019 at 2:28 PM Russell, KV4S <russelljthomas@...> wrote:
I: 2019-01-30 22:25:57.822 Analog Bridge is starting
M: 2019-01-30 22:25:57.823 Setting [GENERAL] logLevel -> 2
M: 2019-01-30 22:25:57.823 Setting [GENERAL] exportMetadata -> true
M: 2019-01-30 22:25:57.823 Setting [GENERAL] subscriberFile -> /var/lib/dvswitch/subscriber_ids.csv
M: 2019-01-30 22:25:57.823 Setting [GENERAL] decoderFallBack -> true
M: 2019-01-30 22:25:57.823 Setting [GENERAL] useEmulator -> true
M: 2019-01-30 22:25:57.824 Setting [GENERAL] emulatorAddress -> 127.0.0.1:2470
M: 2019-01-30 22:25:57.824 Setting [GENERAL] outputAudioDevice -> /dev/null
M: 2019-01-30 22:25:57.824 Setting [GENERAL] inputAudioDevice -> /dev/null
M: 2019-01-30 22:25:57.824 Setting [GENERAL] useMicrophone -> false
M: 2019-01-30 22:25:57.824 Setting [GENERAL] useVox -> false
M: 2019-01-30 22:25:57.824 Setting [GENERAL] voxDecay -> 2
M: 2019-01-30 22:25:57.824 Setting [GENERAL] voxTrigger -> 200
W: 2019-01-30 22:25:57.824 Using deprecated option "server"
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] server -> 127.0.0.1
W: 2019-01-30 22:25:57.824 Using deprecated option "fromDMRPort"
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] fromDMRPort -> 34100
W: 2019-01-30 22:25:57.824 Using deprecated option "toDMRPort"
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] toDMRPort -> 34103
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] ambeMode -> P25
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] minTxTimeMS -> 2000
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] gatewayDmrId -> 3136665
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] repeaterID -> 313666507
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] txTg -> 31777
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] txTs -> 2
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] colorCode -> 1
W: 2019-01-30 22:25:57.824 Using deprecated option "server"
M: 2019-01-30 22:25:57.824 Setting [USRP] server -> 127.0.0.1
W: 2019-01-30 22:25:57.824 Using deprecated option "toASLPort"
M: 2019-01-30 22:25:57.824 Setting [USRP] toASLPort -> 34001
W: 2019-01-30 22:25:57.824 Using deprecated option "fromASLPort"
M: 2019-01-30 22:25:57.824 Setting [USRP] fromASLPort -> 32001
M: 2019-01-30 22:25:57.824 Setting [USRP] aslAudio -> AUDIO_USE_GAIN
M: 2019-01-30 22:25:57.824 Setting [USRP] agcGain -> 5.0
M: 2019-01-30 22:25:57.824 Setting [USRP] dmrAudio -> AUDIO_USE_GAIN
M: 2019-01-30 22:25:57.824 Setting [USRP] dmrGain -> 0.17
W: 2019-01-30 22:25:57.824 Using deprecated option "server"
M: 2019-01-30 22:25:57.824 Setting [DV3000] server -> 127.0.0.1
W: 2019-01-30 22:25:57.824 Using deprecated option "port"
M: 2019-01-30 22:25:57.824 Setting [DV3000] port -> 2460
W: 2019-01-30 22:25:57.824 ioctl reset error 
W: 2019-01-30 22:25:57.824 ioctl speed error 
W: 2019-01-30 22:25:57.824 ioctl stereo error 
W: 2019-01-30 22:25:57.824 ioctl setfmt error 
M: 2019-01-30 22:25:57.824 Audio In/Out Device: /dev/null
I: 2019-01-30 22:25:57.824 Open UDP listener on 127.0.0.1:34100
I: 2019-01-30 22:25:57.824 Open USRP on 127.0.0.1:34001
M: 2019-01-30 22:25:57.824 Connecting to DV3000 hardware......
W: 2019-01-30 22:25:58.845 DV3000 not found at 127.0.0.1:2460
I: 2019-01-30 22:25:59.455 Subscriber IDs loaded: 120633
I: 2019-01-30 22:25:59.455 Default extended metadata <K2HZE>
I: 2019-01-30 22:25:59.455 Connecting to emulator on host 127.0.0.1:2470
W: 2019-01-30 22:25:59.455 Using software MBE decoder version 1.2.3
W: 2019-01-30 22:25:59.455 Using software OP25 IMBE/AMBE vocoder
I: 2019-01-30 22:25:59.456 Starting Analog_Bridge --> USRP thread
I: 2019-01-30 22:25:59.459 Open UDP listener on 127.0.0.1:32001
I: 2019-01-30 22:25:59.459 Starting USRP --> IPSC_Bridge thread

On Wed, Jan 30, 2019 at 4:27 PM Russell Thomas <russelljthomas@...> wrote:
never mind, i think I fixed that. 

let me keep testing and see if i get further.

On Wed, Jan 30, 2019 at 4:21 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
great catch i had got interrupted and did not finish setting up the second analog bridge's service file to make it start.
I started it in the foreground and it's getting this?:  2019-01-30 22:16:18.817 Repeater ID can not be the same as subscriber ID

where can i find the P25Hosts.txt and what should it be set to?


On Wed, Jan 30, 2019 at 3:49 PM <mike@...> wrote:
According the logs, you only have one instance of Analog_Bridge running. You need 2. One for DMR and one for P25 (or perhaps didn't include that log)

I also see that you're loading 17 P25 Reflectors. While probably not critical, your P25Hosts.txt only needs the localhost reflector information, as it isn't meant to connect to others... 

Network Access Control (NAC) is analogous to CTCSS for P25. 

On Wed, Jan 30, 2019 at 1:12 PM Russell, KV4S <russelljthomas@...> wrote:
I have been following the blog working on a Bridge for a fellow in NY and I don't think somethings is linked up correctly but nothing is jumping out at me in the logs.

Logs are located here for review: https://we.tl/t-LYRjUm1WpC 

let me know what i'm missing.

Also, what is NAC? 

On Tue, Jan 29, 2019 at 11:30 AM Steve N4IRS <szingman@...> wrote:
Make these both true.

On 1/29/2019 12:19 PM, Kevin N9OIG wrote:
> M: 2019-01-29 17:11:35.760 Setting [GENERAL] decoderFallBack -> false
> M: 2019-01-29 17:11:35.760 Setting [GENERAL] useEmulator -> false






Re: Blog with P25<->DMR Info

Steve N4IRS
 

The reason YSFn to P25 is so simple is because they are both AMBE. No transcode required.
Yes, Any P25 connection requires P25Gateway.
DMR to P25 requires a transcoder. (AMBE <-> IMBE)

BM <-> MB <-> AB <-> AB <-> MB <-> P25Gateway <-> Outside P25 Reflector that you want to connect to.

The above is one instance of MB with both DMR and P25 enabled.
One AB is configured for DMR. Point to the DMR ports in DVSwitch.ini
One AB is configured for P25.  Point to the P25 ports in DVSwitch.ini
Cross the USRP ports between the two copies of AB.
TX port to RX port. Rinse repeat.
Build from one end towards the middle.
Make sure the traffic is flowing before continuing.

Steve

On 2/12/2019 1:26 PM, Russell, KV4S wrote:
Steve,
I have build the simple YSF to DMR successfully like this guide shows:

can the same be done with P25?
I'm just curious as the blog said i needed P25Gateway to make it work? 

On Tue, Feb 12, 2019 at 12:19 PM Steve N4IRS <szingman@...> wrote:
I hate to say it, I have built a few. They work. Same concept as all the rest. Enable the mode in MMDVM_Bridge and Analog_Bridge and match the ports.

On 2/12/2019 1:16 PM, Russell, KV4S wrote:
Has anyone had any luck getting this type of bridge setup?

I can't seem to get working. I think my analog_bridge_p25 is the problem it never shows any traffic after it's running.

I've gone by the 927 blog without any luck.

On Thu, Jan 31, 2019 at 3:07 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
i did.

I made another change here are the current logs and ini's it actually looks like everything is working but the p25 dashboard does not show traffice and the nxdn dashboard do not show i'm keying up from allstar.



On Thu, Jan 31, 2019 at 2:36 PM Steve N4IRS <szingman@...> wrote:
 Russell,
Have you started at one end and tested each program one at a time in the foreground?
BTW, you can include a zip file with your message. That way someone does not have to go to an external site just to get the zip file.

Steve

On 1/31/2019 3:26 PM, Russell, KV4S wrote:
Well, I got the P25 bridge uniquely named.
hmm it still doesn't appear to be bridged?

Lates logs and inis: https://we.tl/t-wIx3y9gFLe

not sure what i'm missing?

On Wed, Jan 30, 2019 at 4:38 PM <mike@...> wrote:
OK - a couple of things... your Analog Bridges need to be uniquely named, and have uniquely named .ini files. The .ini files are different for each as well. Review the Build and Configure sections on blog.927.org for how to create the needed files and tweak the ini files. 

Also - In the log snippet you just posted, P25 is the indicated mode, but you're supplying DMR-ID info. No need to do that for the P25 ini file. 
Also v2.0: The DMR-ID in your log has an extra digit in it - 313666507 - which might be causing the BM master connection issues if that's what you're using elsewhere in the setup. 

On Wed, Jan 30, 2019 at 2:28 PM Russell, KV4S <russelljthomas@...> wrote:
I: 2019-01-30 22:25:57.822 Analog Bridge is starting
M: 2019-01-30 22:25:57.823 Setting [GENERAL] logLevel -> 2
M: 2019-01-30 22:25:57.823 Setting [GENERAL] exportMetadata -> true
M: 2019-01-30 22:25:57.823 Setting [GENERAL] subscriberFile -> /var/lib/dvswitch/subscriber_ids.csv
M: 2019-01-30 22:25:57.823 Setting [GENERAL] decoderFallBack -> true
M: 2019-01-30 22:25:57.823 Setting [GENERAL] useEmulator -> true
M: 2019-01-30 22:25:57.824 Setting [GENERAL] emulatorAddress -> 127.0.0.1:2470
M: 2019-01-30 22:25:57.824 Setting [GENERAL] outputAudioDevice -> /dev/null
M: 2019-01-30 22:25:57.824 Setting [GENERAL] inputAudioDevice -> /dev/null
M: 2019-01-30 22:25:57.824 Setting [GENERAL] useMicrophone -> false
M: 2019-01-30 22:25:57.824 Setting [GENERAL] useVox -> false
M: 2019-01-30 22:25:57.824 Setting [GENERAL] voxDecay -> 2
M: 2019-01-30 22:25:57.824 Setting [GENERAL] voxTrigger -> 200
W: 2019-01-30 22:25:57.824 Using deprecated option "server"
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] server -> 127.0.0.1
W: 2019-01-30 22:25:57.824 Using deprecated option "fromDMRPort"
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] fromDMRPort -> 34100
W: 2019-01-30 22:25:57.824 Using deprecated option "toDMRPort"
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] toDMRPort -> 34103
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] ambeMode -> P25
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] minTxTimeMS -> 2000
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] gatewayDmrId -> 3136665
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] repeaterID -> 313666507
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] txTg -> 31777
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] txTs -> 2
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] colorCode -> 1
W: 2019-01-30 22:25:57.824 Using deprecated option "server"
M: 2019-01-30 22:25:57.824 Setting [USRP] server -> 127.0.0.1
W: 2019-01-30 22:25:57.824 Using deprecated option "toASLPort"
M: 2019-01-30 22:25:57.824 Setting [USRP] toASLPort -> 34001
W: 2019-01-30 22:25:57.824 Using deprecated option "fromASLPort"
M: 2019-01-30 22:25:57.824 Setting [USRP] fromASLPort -> 32001
M: 2019-01-30 22:25:57.824 Setting [USRP] aslAudio -> AUDIO_USE_GAIN
M: 2019-01-30 22:25:57.824 Setting [USRP] agcGain -> 5.0
M: 2019-01-30 22:25:57.824 Setting [USRP] dmrAudio -> AUDIO_USE_GAIN
M: 2019-01-30 22:25:57.824 Setting [USRP] dmrGain -> 0.17
W: 2019-01-30 22:25:57.824 Using deprecated option "server"
M: 2019-01-30 22:25:57.824 Setting [DV3000] server -> 127.0.0.1
W: 2019-01-30 22:25:57.824 Using deprecated option "port"
M: 2019-01-30 22:25:57.824 Setting [DV3000] port -> 2460
W: 2019-01-30 22:25:57.824 ioctl reset error 
W: 2019-01-30 22:25:57.824 ioctl speed error 
W: 2019-01-30 22:25:57.824 ioctl stereo error 
W: 2019-01-30 22:25:57.824 ioctl setfmt error 
M: 2019-01-30 22:25:57.824 Audio In/Out Device: /dev/null
I: 2019-01-30 22:25:57.824 Open UDP listener on 127.0.0.1:34100
I: 2019-01-30 22:25:57.824 Open USRP on 127.0.0.1:34001
M: 2019-01-30 22:25:57.824 Connecting to DV3000 hardware......
W: 2019-01-30 22:25:58.845 DV3000 not found at 127.0.0.1:2460
I: 2019-01-30 22:25:59.455 Subscriber IDs loaded: 120633
I: 2019-01-30 22:25:59.455 Default extended metadata <K2HZE>
I: 2019-01-30 22:25:59.455 Connecting to emulator on host 127.0.0.1:2470
W: 2019-01-30 22:25:59.455 Using software MBE decoder version 1.2.3
W: 2019-01-30 22:25:59.455 Using software OP25 IMBE/AMBE vocoder
I: 2019-01-30 22:25:59.456 Starting Analog_Bridge --> USRP thread
I: 2019-01-30 22:25:59.459 Open UDP listener on 127.0.0.1:32001
I: 2019-01-30 22:25:59.459 Starting USRP --> IPSC_Bridge thread

On Wed, Jan 30, 2019 at 4:27 PM Russell Thomas <russelljthomas@...> wrote:
never mind, i think I fixed that. 

let me keep testing and see if i get further.

On Wed, Jan 30, 2019 at 4:21 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
great catch i had got interrupted and did not finish setting up the second analog bridge's service file to make it start.
I started it in the foreground and it's getting this?:  2019-01-30 22:16:18.817 Repeater ID can not be the same as subscriber ID

where can i find the P25Hosts.txt and what should it be set to?


On Wed, Jan 30, 2019 at 3:49 PM <mike@...> wrote:
According the logs, you only have one instance of Analog_Bridge running. You need 2. One for DMR and one for P25 (or perhaps didn't include that log)

I also see that you're loading 17 P25 Reflectors. While probably not critical, your P25Hosts.txt only needs the localhost reflector information, as it isn't meant to connect to others... 

Network Access Control (NAC) is analogous to CTCSS for P25. 

On Wed, Jan 30, 2019 at 1:12 PM Russell, KV4S <russelljthomas@...> wrote:
I have been following the blog working on a Bridge for a fellow in NY and I don't think somethings is linked up correctly but nothing is jumping out at me in the logs.

Logs are located here for review: https://we.tl/t-LYRjUm1WpC 

let me know what i'm missing.

Also, what is NAC? 

On Tue, Jan 29, 2019 at 11:30 AM Steve N4IRS <szingman@...> wrote:
Make these both true.

On 1/29/2019 12:19 PM, Kevin N9OIG wrote:
> M: 2019-01-29 17:11:35.760 Setting [GENERAL] decoderFallBack -> false
> M: 2019-01-29 17:11:35.760 Setting [GENERAL] useEmulator -> false







Re: Blog with P25<->DMR Info

Steve N4IRS
 

I no longer have access to those bridges.
The method is to build slowly and test. Do not continue until you have data flowing.
That way, all you have to troubleshoot is where the data stops. (2 modules)

On 2/12/2019 1:36 PM, Russell, KV4S wrote:
Or can you zip and send files from a working system I can compare to?
I must be missing something really silly.

On Tue, Feb 12, 2019, 12:26 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io wrote:
Steve,
I have build the simple YSF to DMR successfully like this guide shows:

can the same be done with P25?
I'm just curious as the blog said i needed P25Gateway to make it work? 

On Tue, Feb 12, 2019 at 12:19 PM Steve N4IRS <szingman@...> wrote:
I hate to say it, I have built a few. They work. Same concept as all the rest. Enable the mode in MMDVM_Bridge and Analog_Bridge and match the ports.

On 2/12/2019 1:16 PM, Russell, KV4S wrote:
Has anyone had any luck getting this type of bridge setup?

I can't seem to get working. I think my analog_bridge_p25 is the problem it never shows any traffic after it's running.

I've gone by the 927 blog without any luck.

On Thu, Jan 31, 2019 at 3:07 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
i did.

I made another change here are the current logs and ini's it actually looks like everything is working but the p25 dashboard does not show traffice and the nxdn dashboard do not show i'm keying up from allstar.



On Thu, Jan 31, 2019 at 2:36 PM Steve N4IRS <szingman@...> wrote:
 Russell,
Have you started at one end and tested each program one at a time in the foreground?
BTW, you can include a zip file with your message. That way someone does not have to go to an external site just to get the zip file.

Steve

On 1/31/2019 3:26 PM, Russell, KV4S wrote:
Well, I got the P25 bridge uniquely named.
hmm it still doesn't appear to be bridged?

Lates logs and inis: https://we.tl/t-wIx3y9gFLe

not sure what i'm missing?

On Wed, Jan 30, 2019 at 4:38 PM <mike@...> wrote:
OK - a couple of things... your Analog Bridges need to be uniquely named, and have uniquely named .ini files. The .ini files are different for each as well. Review the Build and Configure sections on blog.927.org for how to create the needed files and tweak the ini files. 

Also - In the log snippet you just posted, P25 is the indicated mode, but you're supplying DMR-ID info. No need to do that for the P25 ini file. 
Also v2.0: The DMR-ID in your log has an extra digit in it - 313666507 - which might be causing the BM master connection issues if that's what you're using elsewhere in the setup. 

On Wed, Jan 30, 2019 at 2:28 PM Russell, KV4S <russelljthomas@...> wrote:
I: 2019-01-30 22:25:57.822 Analog Bridge is starting
M: 2019-01-30 22:25:57.823 Setting [GENERAL] logLevel -> 2
M: 2019-01-30 22:25:57.823 Setting [GENERAL] exportMetadata -> true
M: 2019-01-30 22:25:57.823 Setting [GENERAL] subscriberFile -> /var/lib/dvswitch/subscriber_ids.csv
M: 2019-01-30 22:25:57.823 Setting [GENERAL] decoderFallBack -> true
M: 2019-01-30 22:25:57.823 Setting [GENERAL] useEmulator -> true
M: 2019-01-30 22:25:57.824 Setting [GENERAL] emulatorAddress -> 127.0.0.1:2470
M: 2019-01-30 22:25:57.824 Setting [GENERAL] outputAudioDevice -> /dev/null
M: 2019-01-30 22:25:57.824 Setting [GENERAL] inputAudioDevice -> /dev/null
M: 2019-01-30 22:25:57.824 Setting [GENERAL] useMicrophone -> false
M: 2019-01-30 22:25:57.824 Setting [GENERAL] useVox -> false
M: 2019-01-30 22:25:57.824 Setting [GENERAL] voxDecay -> 2
M: 2019-01-30 22:25:57.824 Setting [GENERAL] voxTrigger -> 200
W: 2019-01-30 22:25:57.824 Using deprecated option "server"
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] server -> 127.0.0.1
W: 2019-01-30 22:25:57.824 Using deprecated option "fromDMRPort"
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] fromDMRPort -> 34100
W: 2019-01-30 22:25:57.824 Using deprecated option "toDMRPort"
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] toDMRPort -> 34103
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] ambeMode -> P25
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] minTxTimeMS -> 2000
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] gatewayDmrId -> 3136665
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] repeaterID -> 313666507
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] txTg -> 31777
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] txTs -> 2
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] colorCode -> 1
W: 2019-01-30 22:25:57.824 Using deprecated option "server"
M: 2019-01-30 22:25:57.824 Setting [USRP] server -> 127.0.0.1
W: 2019-01-30 22:25:57.824 Using deprecated option "toASLPort"
M: 2019-01-30 22:25:57.824 Setting [USRP] toASLPort -> 34001
W: 2019-01-30 22:25:57.824 Using deprecated option "fromASLPort"
M: 2019-01-30 22:25:57.824 Setting [USRP] fromASLPort -> 32001
M: 2019-01-30 22:25:57.824 Setting [USRP] aslAudio -> AUDIO_USE_GAIN
M: 2019-01-30 22:25:57.824 Setting [USRP] agcGain -> 5.0
M: 2019-01-30 22:25:57.824 Setting [USRP] dmrAudio -> AUDIO_USE_GAIN
M: 2019-01-30 22:25:57.824 Setting [USRP] dmrGain -> 0.17
W: 2019-01-30 22:25:57.824 Using deprecated option "server"
M: 2019-01-30 22:25:57.824 Setting [DV3000] server -> 127.0.0.1
W: 2019-01-30 22:25:57.824 Using deprecated option "port"
M: 2019-01-30 22:25:57.824 Setting [DV3000] port -> 2460
W: 2019-01-30 22:25:57.824 ioctl reset error 
W: 2019-01-30 22:25:57.824 ioctl speed error 
W: 2019-01-30 22:25:57.824 ioctl stereo error 
W: 2019-01-30 22:25:57.824 ioctl setfmt error 
M: 2019-01-30 22:25:57.824 Audio In/Out Device: /dev/null
I: 2019-01-30 22:25:57.824 Open UDP listener on 127.0.0.1:34100
I: 2019-01-30 22:25:57.824 Open USRP on 127.0.0.1:34001
M: 2019-01-30 22:25:57.824 Connecting to DV3000 hardware......
W: 2019-01-30 22:25:58.845 DV3000 not found at 127.0.0.1:2460
I: 2019-01-30 22:25:59.455 Subscriber IDs loaded: 120633
I: 2019-01-30 22:25:59.455 Default extended metadata <K2HZE>
I: 2019-01-30 22:25:59.455 Connecting to emulator on host 127.0.0.1:2470
W: 2019-01-30 22:25:59.455 Using software MBE decoder version 1.2.3
W: 2019-01-30 22:25:59.455 Using software OP25 IMBE/AMBE vocoder
I: 2019-01-30 22:25:59.456 Starting Analog_Bridge --> USRP thread
I: 2019-01-30 22:25:59.459 Open UDP listener on 127.0.0.1:32001
I: 2019-01-30 22:25:59.459 Starting USRP --> IPSC_Bridge thread

On Wed, Jan 30, 2019 at 4:27 PM Russell Thomas <russelljthomas@...> wrote:
never mind, i think I fixed that. 

let me keep testing and see if i get further.

On Wed, Jan 30, 2019 at 4:21 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
great catch i had got interrupted and did not finish setting up the second analog bridge's service file to make it start.
I started it in the foreground and it's getting this?:  2019-01-30 22:16:18.817 Repeater ID can not be the same as subscriber ID

where can i find the P25Hosts.txt and what should it be set to?


On Wed, Jan 30, 2019 at 3:49 PM <mike@...> wrote:
According the logs, you only have one instance of Analog_Bridge running. You need 2. One for DMR and one for P25 (or perhaps didn't include that log)

I also see that you're loading 17 P25 Reflectors. While probably not critical, your P25Hosts.txt only needs the localhost reflector information, as it isn't meant to connect to others... 

Network Access Control (NAC) is analogous to CTCSS for P25. 

On Wed, Jan 30, 2019 at 1:12 PM Russell, KV4S <russelljthomas@...> wrote:
I have been following the blog working on a Bridge for a fellow in NY and I don't think somethings is linked up correctly but nothing is jumping out at me in the logs.

Logs are located here for review: https://we.tl/t-LYRjUm1WpC 

let me know what i'm missing.

Also, what is NAC? 

On Tue, Jan 29, 2019 at 11:30 AM Steve N4IRS <szingman@...> wrote:
Make these both true.

On 1/29/2019 12:19 PM, Kevin N9OIG wrote:
> M: 2019-01-29 17:11:35.760 Setting [GENERAL] decoderFallBack -> false
> M: 2019-01-29 17:11:35.760 Setting [GENERAL] useEmulator -> false







Re: Blog with P25<->DMR Info

Steve N4IRS
 

I change as little as possible when it comes to port numbers in DVSwitch.ini Point AB at the stock port numbers.
Run each program in the foreground. That's how you can watch for errors and see traffic.
netstat -unap is your friend. As is grep.

On 2/12/2019 1:36 PM, Russell, KV4S wrote:
Or can you zip and send files from a working system I can compare to?
I must be missing something really silly.

On Tue, Feb 12, 2019, 12:26 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io wrote:
Steve,
I have build the simple YSF to DMR successfully like this guide shows:

can the same be done with P25?
I'm just curious as the blog said i needed P25Gateway to make it work? 

On Tue, Feb 12, 2019 at 12:19 PM Steve N4IRS <szingman@...> wrote:
I hate to say it, I have built a few. They work. Same concept as all the rest. Enable the mode in MMDVM_Bridge and Analog_Bridge and match the ports.

On 2/12/2019 1:16 PM, Russell, KV4S wrote:
Has anyone had any luck getting this type of bridge setup?

I can't seem to get working. I think my analog_bridge_p25 is the problem it never shows any traffic after it's running.

I've gone by the 927 blog without any luck.

On Thu, Jan 31, 2019 at 3:07 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
i did.

I made another change here are the current logs and ini's it actually looks like everything is working but the p25 dashboard does not show traffice and the nxdn dashboard do not show i'm keying up from allstar.



On Thu, Jan 31, 2019 at 2:36 PM Steve N4IRS <szingman@...> wrote:
 Russell,
Have you started at one end and tested each program one at a time in the foreground?
BTW, you can include a zip file with your message. That way someone does not have to go to an external site just to get the zip file.

Steve

On 1/31/2019 3:26 PM, Russell, KV4S wrote:
Well, I got the P25 bridge uniquely named.
hmm it still doesn't appear to be bridged?

Lates logs and inis: https://we.tl/t-wIx3y9gFLe

not sure what i'm missing?

On Wed, Jan 30, 2019 at 4:38 PM <mike@...> wrote:
OK - a couple of things... your Analog Bridges need to be uniquely named, and have uniquely named .ini files. The .ini files are different for each as well. Review the Build and Configure sections on blog.927.org for how to create the needed files and tweak the ini files. 

Also - In the log snippet you just posted, P25 is the indicated mode, but you're supplying DMR-ID info. No need to do that for the P25 ini file. 
Also v2.0: The DMR-ID in your log has an extra digit in it - 313666507 - which might be causing the BM master connection issues if that's what you're using elsewhere in the setup. 

On Wed, Jan 30, 2019 at 2:28 PM Russell, KV4S <russelljthomas@...> wrote:
I: 2019-01-30 22:25:57.822 Analog Bridge is starting
M: 2019-01-30 22:25:57.823 Setting [GENERAL] logLevel -> 2
M: 2019-01-30 22:25:57.823 Setting [GENERAL] exportMetadata -> true
M: 2019-01-30 22:25:57.823 Setting [GENERAL] subscriberFile -> /var/lib/dvswitch/subscriber_ids.csv
M: 2019-01-30 22:25:57.823 Setting [GENERAL] decoderFallBack -> true
M: 2019-01-30 22:25:57.823 Setting [GENERAL] useEmulator -> true
M: 2019-01-30 22:25:57.824 Setting [GENERAL] emulatorAddress -> 127.0.0.1:2470
M: 2019-01-30 22:25:57.824 Setting [GENERAL] outputAudioDevice -> /dev/null
M: 2019-01-30 22:25:57.824 Setting [GENERAL] inputAudioDevice -> /dev/null
M: 2019-01-30 22:25:57.824 Setting [GENERAL] useMicrophone -> false
M: 2019-01-30 22:25:57.824 Setting [GENERAL] useVox -> false
M: 2019-01-30 22:25:57.824 Setting [GENERAL] voxDecay -> 2
M: 2019-01-30 22:25:57.824 Setting [GENERAL] voxTrigger -> 200
W: 2019-01-30 22:25:57.824 Using deprecated option "server"
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] server -> 127.0.0.1
W: 2019-01-30 22:25:57.824 Using deprecated option "fromDMRPort"
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] fromDMRPort -> 34100
W: 2019-01-30 22:25:57.824 Using deprecated option "toDMRPort"
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] toDMRPort -> 34103
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] ambeMode -> P25
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] minTxTimeMS -> 2000
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] gatewayDmrId -> 3136665
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] repeaterID -> 313666507
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] txTg -> 31777
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] txTs -> 2
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] colorCode -> 1
W: 2019-01-30 22:25:57.824 Using deprecated option "server"
M: 2019-01-30 22:25:57.824 Setting [USRP] server -> 127.0.0.1
W: 2019-01-30 22:25:57.824 Using deprecated option "toASLPort"
M: 2019-01-30 22:25:57.824 Setting [USRP] toASLPort -> 34001
W: 2019-01-30 22:25:57.824 Using deprecated option "fromASLPort"
M: 2019-01-30 22:25:57.824 Setting [USRP] fromASLPort -> 32001
M: 2019-01-30 22:25:57.824 Setting [USRP] aslAudio -> AUDIO_USE_GAIN
M: 2019-01-30 22:25:57.824 Setting [USRP] agcGain -> 5.0
M: 2019-01-30 22:25:57.824 Setting [USRP] dmrAudio -> AUDIO_USE_GAIN
M: 2019-01-30 22:25:57.824 Setting [USRP] dmrGain -> 0.17
W: 2019-01-30 22:25:57.824 Using deprecated option "server"
M: 2019-01-30 22:25:57.824 Setting [DV3000] server -> 127.0.0.1
W: 2019-01-30 22:25:57.824 Using deprecated option "port"
M: 2019-01-30 22:25:57.824 Setting [DV3000] port -> 2460
W: 2019-01-30 22:25:57.824 ioctl reset error 
W: 2019-01-30 22:25:57.824 ioctl speed error 
W: 2019-01-30 22:25:57.824 ioctl stereo error 
W: 2019-01-30 22:25:57.824 ioctl setfmt error 
M: 2019-01-30 22:25:57.824 Audio In/Out Device: /dev/null
I: 2019-01-30 22:25:57.824 Open UDP listener on 127.0.0.1:34100
I: 2019-01-30 22:25:57.824 Open USRP on 127.0.0.1:34001
M: 2019-01-30 22:25:57.824 Connecting to DV3000 hardware......
W: 2019-01-30 22:25:58.845 DV3000 not found at 127.0.0.1:2460
I: 2019-01-30 22:25:59.455 Subscriber IDs loaded: 120633
I: 2019-01-30 22:25:59.455 Default extended metadata <K2HZE>
I: 2019-01-30 22:25:59.455 Connecting to emulator on host 127.0.0.1:2470
W: 2019-01-30 22:25:59.455 Using software MBE decoder version 1.2.3
W: 2019-01-30 22:25:59.455 Using software OP25 IMBE/AMBE vocoder
I: 2019-01-30 22:25:59.456 Starting Analog_Bridge --> USRP thread
I: 2019-01-30 22:25:59.459 Open UDP listener on 127.0.0.1:32001
I: 2019-01-30 22:25:59.459 Starting USRP --> IPSC_Bridge thread

On Wed, Jan 30, 2019 at 4:27 PM Russell Thomas <russelljthomas@...> wrote:
never mind, i think I fixed that. 

let me keep testing and see if i get further.

On Wed, Jan 30, 2019 at 4:21 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
great catch i had got interrupted and did not finish setting up the second analog bridge's service file to make it start.
I started it in the foreground and it's getting this?:  2019-01-30 22:16:18.817 Repeater ID can not be the same as subscriber ID

where can i find the P25Hosts.txt and what should it be set to?


On Wed, Jan 30, 2019 at 3:49 PM <mike@...> wrote:
According the logs, you only have one instance of Analog_Bridge running. You need 2. One for DMR and one for P25 (or perhaps didn't include that log)

I also see that you're loading 17 P25 Reflectors. While probably not critical, your P25Hosts.txt only needs the localhost reflector information, as it isn't meant to connect to others... 

Network Access Control (NAC) is analogous to CTCSS for P25. 

On Wed, Jan 30, 2019 at 1:12 PM Russell, KV4S <russelljthomas@...> wrote:
I have been following the blog working on a Bridge for a fellow in NY and I don't think somethings is linked up correctly but nothing is jumping out at me in the logs.

Logs are located here for review: https://we.tl/t-LYRjUm1WpC 

let me know what i'm missing.

Also, what is NAC? 

On Tue, Jan 29, 2019 at 11:30 AM Steve N4IRS <szingman@...> wrote:
Make these both true.

On 1/29/2019 12:19 PM, Kevin N9OIG wrote:
> M: 2019-01-29 17:11:35.760 Setting [GENERAL] decoderFallBack -> false
> M: 2019-01-29 17:11:35.760 Setting [GENERAL] useEmulator -> false







Re: Blog with P25<->DMR Info

Steve N4IRS
 

If you have an ASL node on the same machine, use it with 2 different private nodes to troubleshoot.

On 2/12/2019 1:36 PM, Russell, KV4S wrote:
Or can you zip and send files from a working system I can compare to?
I must be missing something really silly.

On Tue, Feb 12, 2019, 12:26 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io wrote:
Steve,
I have build the simple YSF to DMR successfully like this guide shows:

can the same be done with P25?
I'm just curious as the blog said i needed P25Gateway to make it work? 

On Tue, Feb 12, 2019 at 12:19 PM Steve N4IRS <szingman@...> wrote:
I hate to say it, I have built a few. They work. Same concept as all the rest. Enable the mode in MMDVM_Bridge and Analog_Bridge and match the ports.

On 2/12/2019 1:16 PM, Russell, KV4S wrote:
Has anyone had any luck getting this type of bridge setup?

I can't seem to get working. I think my analog_bridge_p25 is the problem it never shows any traffic after it's running.

I've gone by the 927 blog without any luck.

On Thu, Jan 31, 2019 at 3:07 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
i did.

I made another change here are the current logs and ini's it actually looks like everything is working but the p25 dashboard does not show traffice and the nxdn dashboard do not show i'm keying up from allstar.



On Thu, Jan 31, 2019 at 2:36 PM Steve N4IRS <szingman@...> wrote:
 Russell,
Have you started at one end and tested each program one at a time in the foreground?
BTW, you can include a zip file with your message. That way someone does not have to go to an external site just to get the zip file.

Steve

On 1/31/2019 3:26 PM, Russell, KV4S wrote:
Well, I got the P25 bridge uniquely named.
hmm it still doesn't appear to be bridged?

Lates logs and inis: https://we.tl/t-wIx3y9gFLe

not sure what i'm missing?

On Wed, Jan 30, 2019 at 4:38 PM <mike@...> wrote:
OK - a couple of things... your Analog Bridges need to be uniquely named, and have uniquely named .ini files. The .ini files are different for each as well. Review the Build and Configure sections on blog.927.org for how to create the needed files and tweak the ini files. 

Also - In the log snippet you just posted, P25 is the indicated mode, but you're supplying DMR-ID info. No need to do that for the P25 ini file. 
Also v2.0: The DMR-ID in your log has an extra digit in it - 313666507 - which might be causing the BM master connection issues if that's what you're using elsewhere in the setup. 

On Wed, Jan 30, 2019 at 2:28 PM Russell, KV4S <russelljthomas@...> wrote:
I: 2019-01-30 22:25:57.822 Analog Bridge is starting
M: 2019-01-30 22:25:57.823 Setting [GENERAL] logLevel -> 2
M: 2019-01-30 22:25:57.823 Setting [GENERAL] exportMetadata -> true
M: 2019-01-30 22:25:57.823 Setting [GENERAL] subscriberFile -> /var/lib/dvswitch/subscriber_ids.csv
M: 2019-01-30 22:25:57.823 Setting [GENERAL] decoderFallBack -> true
M: 2019-01-30 22:25:57.823 Setting [GENERAL] useEmulator -> true
M: 2019-01-30 22:25:57.824 Setting [GENERAL] emulatorAddress -> 127.0.0.1:2470
M: 2019-01-30 22:25:57.824 Setting [GENERAL] outputAudioDevice -> /dev/null
M: 2019-01-30 22:25:57.824 Setting [GENERAL] inputAudioDevice -> /dev/null
M: 2019-01-30 22:25:57.824 Setting [GENERAL] useMicrophone -> false
M: 2019-01-30 22:25:57.824 Setting [GENERAL] useVox -> false
M: 2019-01-30 22:25:57.824 Setting [GENERAL] voxDecay -> 2
M: 2019-01-30 22:25:57.824 Setting [GENERAL] voxTrigger -> 200
W: 2019-01-30 22:25:57.824 Using deprecated option "server"
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] server -> 127.0.0.1
W: 2019-01-30 22:25:57.824 Using deprecated option "fromDMRPort"
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] fromDMRPort -> 34100
W: 2019-01-30 22:25:57.824 Using deprecated option "toDMRPort"
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] toDMRPort -> 34103
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] ambeMode -> P25
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] minTxTimeMS -> 2000
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] gatewayDmrId -> 3136665
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] repeaterID -> 313666507
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] txTg -> 31777
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] txTs -> 2
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] colorCode -> 1
W: 2019-01-30 22:25:57.824 Using deprecated option "server"
M: 2019-01-30 22:25:57.824 Setting [USRP] server -> 127.0.0.1
W: 2019-01-30 22:25:57.824 Using deprecated option "toASLPort"
M: 2019-01-30 22:25:57.824 Setting [USRP] toASLPort -> 34001
W: 2019-01-30 22:25:57.824 Using deprecated option "fromASLPort"
M: 2019-01-30 22:25:57.824 Setting [USRP] fromASLPort -> 32001
M: 2019-01-30 22:25:57.824 Setting [USRP] aslAudio -> AUDIO_USE_GAIN
M: 2019-01-30 22:25:57.824 Setting [USRP] agcGain -> 5.0
M: 2019-01-30 22:25:57.824 Setting [USRP] dmrAudio -> AUDIO_USE_GAIN
M: 2019-01-30 22:25:57.824 Setting [USRP] dmrGain -> 0.17
W: 2019-01-30 22:25:57.824 Using deprecated option "server"
M: 2019-01-30 22:25:57.824 Setting [DV3000] server -> 127.0.0.1
W: 2019-01-30 22:25:57.824 Using deprecated option "port"
M: 2019-01-30 22:25:57.824 Setting [DV3000] port -> 2460
W: 2019-01-30 22:25:57.824 ioctl reset error 
W: 2019-01-30 22:25:57.824 ioctl speed error 
W: 2019-01-30 22:25:57.824 ioctl stereo error 
W: 2019-01-30 22:25:57.824 ioctl setfmt error 
M: 2019-01-30 22:25:57.824 Audio In/Out Device: /dev/null
I: 2019-01-30 22:25:57.824 Open UDP listener on 127.0.0.1:34100
I: 2019-01-30 22:25:57.824 Open USRP on 127.0.0.1:34001
M: 2019-01-30 22:25:57.824 Connecting to DV3000 hardware......
W: 2019-01-30 22:25:58.845 DV3000 not found at 127.0.0.1:2460
I: 2019-01-30 22:25:59.455 Subscriber IDs loaded: 120633
I: 2019-01-30 22:25:59.455 Default extended metadata <K2HZE>
I: 2019-01-30 22:25:59.455 Connecting to emulator on host 127.0.0.1:2470
W: 2019-01-30 22:25:59.455 Using software MBE decoder version 1.2.3
W: 2019-01-30 22:25:59.455 Using software OP25 IMBE/AMBE vocoder
I: 2019-01-30 22:25:59.456 Starting Analog_Bridge --> USRP thread
I: 2019-01-30 22:25:59.459 Open UDP listener on 127.0.0.1:32001
I: 2019-01-30 22:25:59.459 Starting USRP --> IPSC_Bridge thread

On Wed, Jan 30, 2019 at 4:27 PM Russell Thomas <russelljthomas@...> wrote:
never mind, i think I fixed that. 

let me keep testing and see if i get further.

On Wed, Jan 30, 2019 at 4:21 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
great catch i had got interrupted and did not finish setting up the second analog bridge's service file to make it start.
I started it in the foreground and it's getting this?:  2019-01-30 22:16:18.817 Repeater ID can not be the same as subscriber ID

where can i find the P25Hosts.txt and what should it be set to?


On Wed, Jan 30, 2019 at 3:49 PM <mike@...> wrote:
According the logs, you only have one instance of Analog_Bridge running. You need 2. One for DMR and one for P25 (or perhaps didn't include that log)

I also see that you're loading 17 P25 Reflectors. While probably not critical, your P25Hosts.txt only needs the localhost reflector information, as it isn't meant to connect to others... 

Network Access Control (NAC) is analogous to CTCSS for P25. 

On Wed, Jan 30, 2019 at 1:12 PM Russell, KV4S <russelljthomas@...> wrote:
I have been following the blog working on a Bridge for a fellow in NY and I don't think somethings is linked up correctly but nothing is jumping out at me in the logs.

Logs are located here for review: https://we.tl/t-LYRjUm1WpC 

let me know what i'm missing.

Also, what is NAC? 

On Tue, Jan 29, 2019 at 11:30 AM Steve N4IRS <szingman@...> wrote:
Make these both true.

On 1/29/2019 12:19 PM, Kevin N9OIG wrote:
> M: 2019-01-29 17:11:35.760 Setting [GENERAL] decoderFallBack -> false
> M: 2019-01-29 17:11:35.760 Setting [GENERAL] useEmulator -> false







Re: Blog with P25<->DMR Info

 

I do have ASL, I'll give that a try.


On Tue, Feb 12, 2019, 12:45 PM Steve N4IRS <szingman@... wrote:
If you have an ASL node on the same machine, use it with 2 different private nodes to troubleshoot.

On 2/12/2019 1:36 PM, Russell, KV4S wrote:
Or can you zip and send files from a working system I can compare to?
I must be missing something really silly.

On Tue, Feb 12, 2019, 12:26 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io wrote:
Steve,
I have build the simple YSF to DMR successfully like this guide shows:

can the same be done with P25?
I'm just curious as the blog said i needed P25Gateway to make it work? 

On Tue, Feb 12, 2019 at 12:19 PM Steve N4IRS <szingman@...> wrote:
I hate to say it, I have built a few. They work. Same concept as all the rest. Enable the mode in MMDVM_Bridge and Analog_Bridge and match the ports.

On 2/12/2019 1:16 PM, Russell, KV4S wrote:
Has anyone had any luck getting this type of bridge setup?

I can't seem to get working. I think my analog_bridge_p25 is the problem it never shows any traffic after it's running.

I've gone by the 927 blog without any luck.

On Thu, Jan 31, 2019 at 3:07 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
i did.

I made another change here are the current logs and ini's it actually looks like everything is working but the p25 dashboard does not show traffice and the nxdn dashboard do not show i'm keying up from allstar.



On Thu, Jan 31, 2019 at 2:36 PM Steve N4IRS <szingman@...> wrote:
 Russell,
Have you started at one end and tested each program one at a time in the foreground?
BTW, you can include a zip file with your message. That way someone does not have to go to an external site just to get the zip file.

Steve

On 1/31/2019 3:26 PM, Russell, KV4S wrote:
Well, I got the P25 bridge uniquely named.
hmm it still doesn't appear to be bridged?

Lates logs and inis: https://we.tl/t-wIx3y9gFLe

not sure what i'm missing?

On Wed, Jan 30, 2019 at 4:38 PM <mike@...> wrote:
OK - a couple of things... your Analog Bridges need to be uniquely named, and have uniquely named .ini files. The .ini files are different for each as well. Review the Build and Configure sections on blog.927.org for how to create the needed files and tweak the ini files. 

Also - In the log snippet you just posted, P25 is the indicated mode, but you're supplying DMR-ID info. No need to do that for the P25 ini file. 
Also v2.0: The DMR-ID in your log has an extra digit in it - 313666507 - which might be causing the BM master connection issues if that's what you're using elsewhere in the setup. 

On Wed, Jan 30, 2019 at 2:28 PM Russell, KV4S <russelljthomas@...> wrote:
I: 2019-01-30 22:25:57.822 Analog Bridge is starting
M: 2019-01-30 22:25:57.823 Setting [GENERAL] logLevel -> 2
M: 2019-01-30 22:25:57.823 Setting [GENERAL] exportMetadata -> true
M: 2019-01-30 22:25:57.823 Setting [GENERAL] subscriberFile -> /var/lib/dvswitch/subscriber_ids.csv
M: 2019-01-30 22:25:57.823 Setting [GENERAL] decoderFallBack -> true
M: 2019-01-30 22:25:57.823 Setting [GENERAL] useEmulator -> true
M: 2019-01-30 22:25:57.824 Setting [GENERAL] emulatorAddress -> 127.0.0.1:2470
M: 2019-01-30 22:25:57.824 Setting [GENERAL] outputAudioDevice -> /dev/null
M: 2019-01-30 22:25:57.824 Setting [GENERAL] inputAudioDevice -> /dev/null
M: 2019-01-30 22:25:57.824 Setting [GENERAL] useMicrophone -> false
M: 2019-01-30 22:25:57.824 Setting [GENERAL] useVox -> false
M: 2019-01-30 22:25:57.824 Setting [GENERAL] voxDecay -> 2
M: 2019-01-30 22:25:57.824 Setting [GENERAL] voxTrigger -> 200
W: 2019-01-30 22:25:57.824 Using deprecated option "server"
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] server -> 127.0.0.1
W: 2019-01-30 22:25:57.824 Using deprecated option "fromDMRPort"
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] fromDMRPort -> 34100
W: 2019-01-30 22:25:57.824 Using deprecated option "toDMRPort"
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] toDMRPort -> 34103
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] ambeMode -> P25
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] minTxTimeMS -> 2000
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] gatewayDmrId -> 3136665
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] repeaterID -> 313666507
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] txTg -> 31777
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] txTs -> 2
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] colorCode -> 1
W: 2019-01-30 22:25:57.824 Using deprecated option "server"
M: 2019-01-30 22:25:57.824 Setting [USRP] server -> 127.0.0.1
W: 2019-01-30 22:25:57.824 Using deprecated option "toASLPort"
M: 2019-01-30 22:25:57.824 Setting [USRP] toASLPort -> 34001
W: 2019-01-30 22:25:57.824 Using deprecated option "fromASLPort"
M: 2019-01-30 22:25:57.824 Setting [USRP] fromASLPort -> 32001
M: 2019-01-30 22:25:57.824 Setting [USRP] aslAudio -> AUDIO_USE_GAIN
M: 2019-01-30 22:25:57.824 Setting [USRP] agcGain -> 5.0
M: 2019-01-30 22:25:57.824 Setting [USRP] dmrAudio -> AUDIO_USE_GAIN
M: 2019-01-30 22:25:57.824 Setting [USRP] dmrGain -> 0.17
W: 2019-01-30 22:25:57.824 Using deprecated option "server"
M: 2019-01-30 22:25:57.824 Setting [DV3000] server -> 127.0.0.1
W: 2019-01-30 22:25:57.824 Using deprecated option "port"
M: 2019-01-30 22:25:57.824 Setting [DV3000] port -> 2460
W: 2019-01-30 22:25:57.824 ioctl reset error 
W: 2019-01-30 22:25:57.824 ioctl speed error 
W: 2019-01-30 22:25:57.824 ioctl stereo error 
W: 2019-01-30 22:25:57.824 ioctl setfmt error 
M: 2019-01-30 22:25:57.824 Audio In/Out Device: /dev/null
I: 2019-01-30 22:25:57.824 Open UDP listener on 127.0.0.1:34100
I: 2019-01-30 22:25:57.824 Open USRP on 127.0.0.1:34001
M: 2019-01-30 22:25:57.824 Connecting to DV3000 hardware......
W: 2019-01-30 22:25:58.845 DV3000 not found at 127.0.0.1:2460
I: 2019-01-30 22:25:59.455 Subscriber IDs loaded: 120633
I: 2019-01-30 22:25:59.455 Default extended metadata <K2HZE>
I: 2019-01-30 22:25:59.455 Connecting to emulator on host 127.0.0.1:2470
W: 2019-01-30 22:25:59.455 Using software MBE decoder version 1.2.3
W: 2019-01-30 22:25:59.455 Using software OP25 IMBE/AMBE vocoder
I: 2019-01-30 22:25:59.456 Starting Analog_Bridge --> USRP thread
I: 2019-01-30 22:25:59.459 Open UDP listener on 127.0.0.1:32001
I: 2019-01-30 22:25:59.459 Starting USRP --> IPSC_Bridge thread

On Wed, Jan 30, 2019 at 4:27 PM Russell Thomas <russelljthomas@...> wrote:
never mind, i think I fixed that. 

let me keep testing and see if i get further.

On Wed, Jan 30, 2019 at 4:21 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
great catch i had got interrupted and did not finish setting up the second analog bridge's service file to make it start.
I started it in the foreground and it's getting this?:  2019-01-30 22:16:18.817 Repeater ID can not be the same as subscriber ID

where can i find the P25Hosts.txt and what should it be set to?


On Wed, Jan 30, 2019 at 3:49 PM <mike@...> wrote:
According the logs, you only have one instance of Analog_Bridge running. You need 2. One for DMR and one for P25 (or perhaps didn't include that log)

I also see that you're loading 17 P25 Reflectors. While probably not critical, your P25Hosts.txt only needs the localhost reflector information, as it isn't meant to connect to others... 

Network Access Control (NAC) is analogous to CTCSS for P25. 

On Wed, Jan 30, 2019 at 1:12 PM Russell, KV4S <russelljthomas@...> wrote:
I have been following the blog working on a Bridge for a fellow in NY and I don't think somethings is linked up correctly but nothing is jumping out at me in the logs.

Logs are located here for review: https://we.tl/t-LYRjUm1WpC 

let me know what i'm missing.

Also, what is NAC? 

On Tue, Jan 29, 2019 at 11:30 AM Steve N4IRS <szingman@...> wrote:
Make these both true.

On 1/29/2019 12:19 PM, Kevin N9OIG wrote:
> M: 2019-01-29 17:11:35.760 Setting [GENERAL] decoderFallBack -> false
> M: 2019-01-29 17:11:35.760 Setting [GENERAL] useEmulator -> false







Re: Blog with P25<->DMR Info

Steve N4IRS
 

MMDVM_Bridge plays by the same rules as MMDVM_Host:
DMR: No gateway required for BM
NXDN: Gateway required
YSF: No gateway required for YSF reflectors
P25: Gateway required
D-Star: Gateway required

On 2/12/2019 1:36 PM, Russell, KV4S wrote:
Or can you zip and send files from a working system I can compare to?
I must be missing something really silly.

On Tue, Feb 12, 2019, 12:26 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io wrote:
Steve,
I have build the simple YSF to DMR successfully like this guide shows:

can the same be done with P25?
I'm just curious as the blog said i needed P25Gateway to make it work? 

On Tue, Feb 12, 2019 at 12:19 PM Steve N4IRS <szingman@...> wrote:
I hate to say it, I have built a few. They work. Same concept as all the rest. Enable the mode in MMDVM_Bridge and Analog_Bridge and match the ports.

On 2/12/2019 1:16 PM, Russell, KV4S wrote:
Has anyone had any luck getting this type of bridge setup?

I can't seem to get working. I think my analog_bridge_p25 is the problem it never shows any traffic after it's running.

I've gone by the 927 blog without any luck.

On Thu, Jan 31, 2019 at 3:07 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
i did.

I made another change here are the current logs and ini's it actually looks like everything is working but the p25 dashboard does not show traffice and the nxdn dashboard do not show i'm keying up from allstar.



On Thu, Jan 31, 2019 at 2:36 PM Steve N4IRS <szingman@...> wrote:
 Russell,
Have you started at one end and tested each program one at a time in the foreground?
BTW, you can include a zip file with your message. That way someone does not have to go to an external site just to get the zip file.

Steve

On 1/31/2019 3:26 PM, Russell, KV4S wrote:
Well, I got the P25 bridge uniquely named.
hmm it still doesn't appear to be bridged?

Lates logs and inis: https://we.tl/t-wIx3y9gFLe

not sure what i'm missing?

On Wed, Jan 30, 2019 at 4:38 PM <mike@...> wrote:
OK - a couple of things... your Analog Bridges need to be uniquely named, and have uniquely named .ini files. The .ini files are different for each as well. Review the Build and Configure sections on blog.927.org for how to create the needed files and tweak the ini files. 

Also - In the log snippet you just posted, P25 is the indicated mode, but you're supplying DMR-ID info. No need to do that for the P25 ini file. 
Also v2.0: The DMR-ID in your log has an extra digit in it - 313666507 - which might be causing the BM master connection issues if that's what you're using elsewhere in the setup. 

On Wed, Jan 30, 2019 at 2:28 PM Russell, KV4S <russelljthomas@...> wrote:
I: 2019-01-30 22:25:57.822 Analog Bridge is starting
M: 2019-01-30 22:25:57.823 Setting [GENERAL] logLevel -> 2
M: 2019-01-30 22:25:57.823 Setting [GENERAL] exportMetadata -> true
M: 2019-01-30 22:25:57.823 Setting [GENERAL] subscriberFile -> /var/lib/dvswitch/subscriber_ids.csv
M: 2019-01-30 22:25:57.823 Setting [GENERAL] decoderFallBack -> true
M: 2019-01-30 22:25:57.823 Setting [GENERAL] useEmulator -> true
M: 2019-01-30 22:25:57.824 Setting [GENERAL] emulatorAddress -> 127.0.0.1:2470
M: 2019-01-30 22:25:57.824 Setting [GENERAL] outputAudioDevice -> /dev/null
M: 2019-01-30 22:25:57.824 Setting [GENERAL] inputAudioDevice -> /dev/null
M: 2019-01-30 22:25:57.824 Setting [GENERAL] useMicrophone -> false
M: 2019-01-30 22:25:57.824 Setting [GENERAL] useVox -> false
M: 2019-01-30 22:25:57.824 Setting [GENERAL] voxDecay -> 2
M: 2019-01-30 22:25:57.824 Setting [GENERAL] voxTrigger -> 200
W: 2019-01-30 22:25:57.824 Using deprecated option "server"
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] server -> 127.0.0.1
W: 2019-01-30 22:25:57.824 Using deprecated option "fromDMRPort"
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] fromDMRPort -> 34100
W: 2019-01-30 22:25:57.824 Using deprecated option "toDMRPort"
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] toDMRPort -> 34103
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] ambeMode -> P25
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] minTxTimeMS -> 2000
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] gatewayDmrId -> 3136665
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] repeaterID -> 313666507
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] txTg -> 31777
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] txTs -> 2
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] colorCode -> 1
W: 2019-01-30 22:25:57.824 Using deprecated option "server"
M: 2019-01-30 22:25:57.824 Setting [USRP] server -> 127.0.0.1
W: 2019-01-30 22:25:57.824 Using deprecated option "toASLPort"
M: 2019-01-30 22:25:57.824 Setting [USRP] toASLPort -> 34001
W: 2019-01-30 22:25:57.824 Using deprecated option "fromASLPort"
M: 2019-01-30 22:25:57.824 Setting [USRP] fromASLPort -> 32001
M: 2019-01-30 22:25:57.824 Setting [USRP] aslAudio -> AUDIO_USE_GAIN
M: 2019-01-30 22:25:57.824 Setting [USRP] agcGain -> 5.0
M: 2019-01-30 22:25:57.824 Setting [USRP] dmrAudio -> AUDIO_USE_GAIN
M: 2019-01-30 22:25:57.824 Setting [USRP] dmrGain -> 0.17
W: 2019-01-30 22:25:57.824 Using deprecated option "server"
M: 2019-01-30 22:25:57.824 Setting [DV3000] server -> 127.0.0.1
W: 2019-01-30 22:25:57.824 Using deprecated option "port"
M: 2019-01-30 22:25:57.824 Setting [DV3000] port -> 2460
W: 2019-01-30 22:25:57.824 ioctl reset error 
W: 2019-01-30 22:25:57.824 ioctl speed error 
W: 2019-01-30 22:25:57.824 ioctl stereo error 
W: 2019-01-30 22:25:57.824 ioctl setfmt error 
M: 2019-01-30 22:25:57.824 Audio In/Out Device: /dev/null
I: 2019-01-30 22:25:57.824 Open UDP listener on 127.0.0.1:34100
I: 2019-01-30 22:25:57.824 Open USRP on 127.0.0.1:34001
M: 2019-01-30 22:25:57.824 Connecting to DV3000 hardware......
W: 2019-01-30 22:25:58.845 DV3000 not found at 127.0.0.1:2460
I: 2019-01-30 22:25:59.455 Subscriber IDs loaded: 120633
I: 2019-01-30 22:25:59.455 Default extended metadata <K2HZE>
I: 2019-01-30 22:25:59.455 Connecting to emulator on host 127.0.0.1:2470
W: 2019-01-30 22:25:59.455 Using software MBE decoder version 1.2.3
W: 2019-01-30 22:25:59.455 Using software OP25 IMBE/AMBE vocoder
I: 2019-01-30 22:25:59.456 Starting Analog_Bridge --> USRP thread
I: 2019-01-30 22:25:59.459 Open UDP listener on 127.0.0.1:32001
I: 2019-01-30 22:25:59.459 Starting USRP --> IPSC_Bridge thread

On Wed, Jan 30, 2019 at 4:27 PM Russell Thomas <russelljthomas@...> wrote:
never mind, i think I fixed that. 

let me keep testing and see if i get further.

On Wed, Jan 30, 2019 at 4:21 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
great catch i had got interrupted and did not finish setting up the second analog bridge's service file to make it start.
I started it in the foreground and it's getting this?:  2019-01-30 22:16:18.817 Repeater ID can not be the same as subscriber ID

where can i find the P25Hosts.txt and what should it be set to?


On Wed, Jan 30, 2019 at 3:49 PM <mike@...> wrote:
According the logs, you only have one instance of Analog_Bridge running. You need 2. One for DMR and one for P25 (or perhaps didn't include that log)

I also see that you're loading 17 P25 Reflectors. While probably not critical, your P25Hosts.txt only needs the localhost reflector information, as it isn't meant to connect to others... 

Network Access Control (NAC) is analogous to CTCSS for P25. 

On Wed, Jan 30, 2019 at 1:12 PM Russell, KV4S <russelljthomas@...> wrote:
I have been following the blog working on a Bridge for a fellow in NY and I don't think somethings is linked up correctly but nothing is jumping out at me in the logs.

Logs are located here for review: https://we.tl/t-LYRjUm1WpC 

let me know what i'm missing.

Also, what is NAC? 

On Tue, Jan 29, 2019 at 11:30 AM Steve N4IRS <szingman@...> wrote:
Make these both true.

On 1/29/2019 12:19 PM, Kevin N9OIG wrote:
> M: 2019-01-29 17:11:35.760 Setting [GENERAL] decoderFallBack -> false
> M: 2019-01-29 17:11:35.760 Setting [GENERAL] useEmulator -> false







Re: Blog with P25<->DMR Info

mike@...
 

Russell, 

In your Analog Bridge P25.ini change the TxTS number to 2, to match all the other occurrences of that . 
More changes likely as I go through the .zip you sent over. There look to be a lot of changes since we last traded emails and .ini files. 



On Tue, Feb 12, 2019 at 10:16 AM Russell, KV4S <russelljthomas@...> wrote:
Has anyone had any luck getting this type of bridge setup?

I can't seem to get working. I think my analog_bridge_p25 is the problem it never shows any traffic after it's running.

I've gone by the 927 blog without any luck.

On Thu, Jan 31, 2019 at 3:07 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
i did.

I made another change here are the current logs and ini's it actually looks like everything is working but the p25 dashboard does not show traffice and the nxdn dashboard do not show i'm keying up from allstar.



On Thu, Jan 31, 2019 at 2:36 PM Steve N4IRS <szingman@...> wrote:
 Russell,
Have you started at one end and tested each program one at a time in the foreground?
BTW, you can include a zip file with your message. That way someone does not have to go to an external site just to get the zip file.

Steve

On 1/31/2019 3:26 PM, Russell, KV4S wrote:
Well, I got the P25 bridge uniquely named.
hmm it still doesn't appear to be bridged?

Lates logs and inis: https://we.tl/t-wIx3y9gFLe

not sure what i'm missing?

On Wed, Jan 30, 2019 at 4:38 PM <mike@...> wrote:
OK - a couple of things... your Analog Bridges need to be uniquely named, and have uniquely named .ini files. The .ini files are different for each as well. Review the Build and Configure sections on blog.927.org for how to create the needed files and tweak the ini files. 

Also - In the log snippet you just posted, P25 is the indicated mode, but you're supplying DMR-ID info. No need to do that for the P25 ini file. 
Also v2.0: The DMR-ID in your log has an extra digit in it - 313666507 - which might be causing the BM master connection issues if that's what you're using elsewhere in the setup. 

On Wed, Jan 30, 2019 at 2:28 PM Russell, KV4S <russelljthomas@...> wrote:
I: 2019-01-30 22:25:57.822 Analog Bridge is starting
M: 2019-01-30 22:25:57.823 Setting [GENERAL] logLevel -> 2
M: 2019-01-30 22:25:57.823 Setting [GENERAL] exportMetadata -> true
M: 2019-01-30 22:25:57.823 Setting [GENERAL] subscriberFile -> /var/lib/dvswitch/subscriber_ids.csv
M: 2019-01-30 22:25:57.823 Setting [GENERAL] decoderFallBack -> true
M: 2019-01-30 22:25:57.823 Setting [GENERAL] useEmulator -> true
M: 2019-01-30 22:25:57.824 Setting [GENERAL] emulatorAddress -> 127.0.0.1:2470
M: 2019-01-30 22:25:57.824 Setting [GENERAL] outputAudioDevice -> /dev/null
M: 2019-01-30 22:25:57.824 Setting [GENERAL] inputAudioDevice -> /dev/null
M: 2019-01-30 22:25:57.824 Setting [GENERAL] useMicrophone -> false
M: 2019-01-30 22:25:57.824 Setting [GENERAL] useVox -> false
M: 2019-01-30 22:25:57.824 Setting [GENERAL] voxDecay -> 2
M: 2019-01-30 22:25:57.824 Setting [GENERAL] voxTrigger -> 200
W: 2019-01-30 22:25:57.824 Using deprecated option "server"
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] server -> 127.0.0.1
W: 2019-01-30 22:25:57.824 Using deprecated option "fromDMRPort"
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] fromDMRPort -> 34100
W: 2019-01-30 22:25:57.824 Using deprecated option "toDMRPort"
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] toDMRPort -> 34103
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] ambeMode -> P25
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] minTxTimeMS -> 2000
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] gatewayDmrId -> 3136665
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] repeaterID -> 313666507
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] txTg -> 31777
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] txTs -> 2
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] colorCode -> 1
W: 2019-01-30 22:25:57.824 Using deprecated option "server"
M: 2019-01-30 22:25:57.824 Setting [USRP] server -> 127.0.0.1
W: 2019-01-30 22:25:57.824 Using deprecated option "toASLPort"
M: 2019-01-30 22:25:57.824 Setting [USRP] toASLPort -> 34001
W: 2019-01-30 22:25:57.824 Using deprecated option "fromASLPort"
M: 2019-01-30 22:25:57.824 Setting [USRP] fromASLPort -> 32001
M: 2019-01-30 22:25:57.824 Setting [USRP] aslAudio -> AUDIO_USE_GAIN
M: 2019-01-30 22:25:57.824 Setting [USRP] agcGain -> 5.0
M: 2019-01-30 22:25:57.824 Setting [USRP] dmrAudio -> AUDIO_USE_GAIN
M: 2019-01-30 22:25:57.824 Setting [USRP] dmrGain -> 0.17
W: 2019-01-30 22:25:57.824 Using deprecated option "server"
M: 2019-01-30 22:25:57.824 Setting [DV3000] server -> 127.0.0.1
W: 2019-01-30 22:25:57.824 Using deprecated option "port"
M: 2019-01-30 22:25:57.824 Setting [DV3000] port -> 2460
W: 2019-01-30 22:25:57.824 ioctl reset error 
W: 2019-01-30 22:25:57.824 ioctl speed error 
W: 2019-01-30 22:25:57.824 ioctl stereo error 
W: 2019-01-30 22:25:57.824 ioctl setfmt error 
M: 2019-01-30 22:25:57.824 Audio In/Out Device: /dev/null
I: 2019-01-30 22:25:57.824 Open UDP listener on 127.0.0.1:34100
I: 2019-01-30 22:25:57.824 Open USRP on 127.0.0.1:34001
M: 2019-01-30 22:25:57.824 Connecting to DV3000 hardware......
W: 2019-01-30 22:25:58.845 DV3000 not found at 127.0.0.1:2460
I: 2019-01-30 22:25:59.455 Subscriber IDs loaded: 120633
I: 2019-01-30 22:25:59.455 Default extended metadata <K2HZE>
I: 2019-01-30 22:25:59.455 Connecting to emulator on host 127.0.0.1:2470
W: 2019-01-30 22:25:59.455 Using software MBE decoder version 1.2.3
W: 2019-01-30 22:25:59.455 Using software OP25 IMBE/AMBE vocoder
I: 2019-01-30 22:25:59.456 Starting Analog_Bridge --> USRP thread
I: 2019-01-30 22:25:59.459 Open UDP listener on 127.0.0.1:32001
I: 2019-01-30 22:25:59.459 Starting USRP --> IPSC_Bridge thread

On Wed, Jan 30, 2019 at 4:27 PM Russell Thomas <russelljthomas@...> wrote:
never mind, i think I fixed that. 

let me keep testing and see if i get further.

On Wed, Jan 30, 2019 at 4:21 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
great catch i had got interrupted and did not finish setting up the second analog bridge's service file to make it start.
I started it in the foreground and it's getting this?:  2019-01-30 22:16:18.817 Repeater ID can not be the same as subscriber ID

where can i find the P25Hosts.txt and what should it be set to?


On Wed, Jan 30, 2019 at 3:49 PM <mike@...> wrote:
According the logs, you only have one instance of Analog_Bridge running. You need 2. One for DMR and one for P25 (or perhaps didn't include that log)

I also see that you're loading 17 P25 Reflectors. While probably not critical, your P25Hosts.txt only needs the localhost reflector information, as it isn't meant to connect to others... 

Network Access Control (NAC) is analogous to CTCSS for P25. 

On Wed, Jan 30, 2019 at 1:12 PM Russell, KV4S <russelljthomas@...> wrote:
I have been following the blog working on a Bridge for a fellow in NY and I don't think somethings is linked up correctly but nothing is jumping out at me in the logs.

Logs are located here for review: https://we.tl/t-LYRjUm1WpC 

let me know what i'm missing.

Also, what is NAC? 

On Tue, Jan 29, 2019 at 11:30 AM Steve N4IRS <szingman@...> wrote:
Make these both true.

On 1/29/2019 12:19 PM, Kevin N9OIG wrote:
> M: 2019-01-29 17:11:35.760 Setting [GENERAL] decoderFallBack -> false
> M: 2019-01-29 17:11:35.760 Setting [GENERAL] useEmulator -> false





Re: Blog with P25<->DMR Info

 

awesome thanks Mike, I'll get started shortly.


On Tue, Feb 12, 2019 at 12:49 PM <mike@...> wrote:
Russell, 

In your Analog Bridge P25.ini change the TxTS number to 2, to match all the other occurrences of that . 
More changes likely as I go through the .zip you sent over. There look to be a lot of changes since we last traded emails and .ini files. 



On Tue, Feb 12, 2019 at 10:16 AM Russell, KV4S <russelljthomas@...> wrote:
Has anyone had any luck getting this type of bridge setup?

I can't seem to get working. I think my analog_bridge_p25 is the problem it never shows any traffic after it's running.

I've gone by the 927 blog without any luck.

On Thu, Jan 31, 2019 at 3:07 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
i did.

I made another change here are the current logs and ini's it actually looks like everything is working but the p25 dashboard does not show traffice and the nxdn dashboard do not show i'm keying up from allstar.



On Thu, Jan 31, 2019 at 2:36 PM Steve N4IRS <szingman@...> wrote:
 Russell,
Have you started at one end and tested each program one at a time in the foreground?
BTW, you can include a zip file with your message. That way someone does not have to go to an external site just to get the zip file.

Steve

On 1/31/2019 3:26 PM, Russell, KV4S wrote:
Well, I got the P25 bridge uniquely named.
hmm it still doesn't appear to be bridged?

Lates logs and inis: https://we.tl/t-wIx3y9gFLe

not sure what i'm missing?

On Wed, Jan 30, 2019 at 4:38 PM <mike@...> wrote:
OK - a couple of things... your Analog Bridges need to be uniquely named, and have uniquely named .ini files. The .ini files are different for each as well. Review the Build and Configure sections on blog.927.org for how to create the needed files and tweak the ini files. 

Also - In the log snippet you just posted, P25 is the indicated mode, but you're supplying DMR-ID info. No need to do that for the P25 ini file. 
Also v2.0: The DMR-ID in your log has an extra digit in it - 313666507 - which might be causing the BM master connection issues if that's what you're using elsewhere in the setup. 

On Wed, Jan 30, 2019 at 2:28 PM Russell, KV4S <russelljthomas@...> wrote:
I: 2019-01-30 22:25:57.822 Analog Bridge is starting
M: 2019-01-30 22:25:57.823 Setting [GENERAL] logLevel -> 2
M: 2019-01-30 22:25:57.823 Setting [GENERAL] exportMetadata -> true
M: 2019-01-30 22:25:57.823 Setting [GENERAL] subscriberFile -> /var/lib/dvswitch/subscriber_ids.csv
M: 2019-01-30 22:25:57.823 Setting [GENERAL] decoderFallBack -> true
M: 2019-01-30 22:25:57.823 Setting [GENERAL] useEmulator -> true
M: 2019-01-30 22:25:57.824 Setting [GENERAL] emulatorAddress -> 127.0.0.1:2470
M: 2019-01-30 22:25:57.824 Setting [GENERAL] outputAudioDevice -> /dev/null
M: 2019-01-30 22:25:57.824 Setting [GENERAL] inputAudioDevice -> /dev/null
M: 2019-01-30 22:25:57.824 Setting [GENERAL] useMicrophone -> false
M: 2019-01-30 22:25:57.824 Setting [GENERAL] useVox -> false
M: 2019-01-30 22:25:57.824 Setting [GENERAL] voxDecay -> 2
M: 2019-01-30 22:25:57.824 Setting [GENERAL] voxTrigger -> 200
W: 2019-01-30 22:25:57.824 Using deprecated option "server"
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] server -> 127.0.0.1
W: 2019-01-30 22:25:57.824 Using deprecated option "fromDMRPort"
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] fromDMRPort -> 34100
W: 2019-01-30 22:25:57.824 Using deprecated option "toDMRPort"
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] toDMRPort -> 34103
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] ambeMode -> P25
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] minTxTimeMS -> 2000
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] gatewayDmrId -> 3136665
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] repeaterID -> 313666507
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] txTg -> 31777
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] txTs -> 2
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] colorCode -> 1
W: 2019-01-30 22:25:57.824 Using deprecated option "server"
M: 2019-01-30 22:25:57.824 Setting [USRP] server -> 127.0.0.1
W: 2019-01-30 22:25:57.824 Using deprecated option "toASLPort"
M: 2019-01-30 22:25:57.824 Setting [USRP] toASLPort -> 34001
W: 2019-01-30 22:25:57.824 Using deprecated option "fromASLPort"
M: 2019-01-30 22:25:57.824 Setting [USRP] fromASLPort -> 32001
M: 2019-01-30 22:25:57.824 Setting [USRP] aslAudio -> AUDIO_USE_GAIN
M: 2019-01-30 22:25:57.824 Setting [USRP] agcGain -> 5.0
M: 2019-01-30 22:25:57.824 Setting [USRP] dmrAudio -> AUDIO_USE_GAIN
M: 2019-01-30 22:25:57.824 Setting [USRP] dmrGain -> 0.17
W: 2019-01-30 22:25:57.824 Using deprecated option "server"
M: 2019-01-30 22:25:57.824 Setting [DV3000] server -> 127.0.0.1
W: 2019-01-30 22:25:57.824 Using deprecated option "port"
M: 2019-01-30 22:25:57.824 Setting [DV3000] port -> 2460
W: 2019-01-30 22:25:57.824 ioctl reset error 
W: 2019-01-30 22:25:57.824 ioctl speed error 
W: 2019-01-30 22:25:57.824 ioctl stereo error 
W: 2019-01-30 22:25:57.824 ioctl setfmt error 
M: 2019-01-30 22:25:57.824 Audio In/Out Device: /dev/null
I: 2019-01-30 22:25:57.824 Open UDP listener on 127.0.0.1:34100
I: 2019-01-30 22:25:57.824 Open USRP on 127.0.0.1:34001
M: 2019-01-30 22:25:57.824 Connecting to DV3000 hardware......
W: 2019-01-30 22:25:58.845 DV3000 not found at 127.0.0.1:2460
I: 2019-01-30 22:25:59.455 Subscriber IDs loaded: 120633
I: 2019-01-30 22:25:59.455 Default extended metadata <K2HZE>
I: 2019-01-30 22:25:59.455 Connecting to emulator on host 127.0.0.1:2470
W: 2019-01-30 22:25:59.455 Using software MBE decoder version 1.2.3
W: 2019-01-30 22:25:59.455 Using software OP25 IMBE/AMBE vocoder
I: 2019-01-30 22:25:59.456 Starting Analog_Bridge --> USRP thread
I: 2019-01-30 22:25:59.459 Open UDP listener on 127.0.0.1:32001
I: 2019-01-30 22:25:59.459 Starting USRP --> IPSC_Bridge thread

On Wed, Jan 30, 2019 at 4:27 PM Russell Thomas <russelljthomas@...> wrote:
never mind, i think I fixed that. 

let me keep testing and see if i get further.

On Wed, Jan 30, 2019 at 4:21 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
great catch i had got interrupted and did not finish setting up the second analog bridge's service file to make it start.
I started it in the foreground and it's getting this?:  2019-01-30 22:16:18.817 Repeater ID can not be the same as subscriber ID

where can i find the P25Hosts.txt and what should it be set to?


On Wed, Jan 30, 2019 at 3:49 PM <mike@...> wrote:
According the logs, you only have one instance of Analog_Bridge running. You need 2. One for DMR and one for P25 (or perhaps didn't include that log)

I also see that you're loading 17 P25 Reflectors. While probably not critical, your P25Hosts.txt only needs the localhost reflector information, as it isn't meant to connect to others... 

Network Access Control (NAC) is analogous to CTCSS for P25. 

On Wed, Jan 30, 2019 at 1:12 PM Russell, KV4S <russelljthomas@...> wrote:
I have been following the blog working on a Bridge for a fellow in NY and I don't think somethings is linked up correctly but nothing is jumping out at me in the logs.

Logs are located here for review: https://we.tl/t-LYRjUm1WpC 

let me know what i'm missing.

Also, what is NAC? 

On Tue, Jan 29, 2019 at 11:30 AM Steve N4IRS <szingman@...> wrote:
Make these both true.

On 1/29/2019 12:19 PM, Kevin N9OIG wrote:
> M: 2019-01-29 17:11:35.760 Setting [GENERAL] decoderFallBack -> false
> M: 2019-01-29 17:11:35.760 Setting [GENERAL] useEmulator -> false





Re: Blog with P25<->DMR Info

Steve N4IRS
 

This is a port diagram of the DMR <-> P25 bridge.

<https://dvswitch.groups.io/g/main/wiki/Port-Diagram>

On 2/12/2019 1:36 PM, Russell, KV4S wrote:
Or can you zip and send files from a working system I can compare to?
I must be missing something really silly.

On Tue, Feb 12, 2019, 12:26 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io wrote:
Steve,
I have build the simple YSF to DMR successfully like this guide shows:

can the same be done with P25?
I'm just curious as the blog said i needed P25Gateway to make it work? 

On Tue, Feb 12, 2019 at 12:19 PM Steve N4IRS <szingman@...> wrote:
I hate to say it, I have built a few. They work. Same concept as all the rest. Enable the mode in MMDVM_Bridge and Analog_Bridge and match the ports.

On 2/12/2019 1:16 PM, Russell, KV4S wrote:
Has anyone had any luck getting this type of bridge setup?

I can't seem to get working. I think my analog_bridge_p25 is the problem it never shows any traffic after it's running.

I've gone by the 927 blog without any luck.

On Thu, Jan 31, 2019 at 3:07 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
i did.

I made another change here are the current logs and ini's it actually looks like everything is working but the p25 dashboard does not show traffice and the nxdn dashboard do not show i'm keying up from allstar.



On Thu, Jan 31, 2019 at 2:36 PM Steve N4IRS <szingman@...> wrote:
 Russell,
Have you started at one end and tested each program one at a time in the foreground?
BTW, you can include a zip file with your message. That way someone does not have to go to an external site just to get the zip file.

Steve

On 1/31/2019 3:26 PM, Russell, KV4S wrote:
Well, I got the P25 bridge uniquely named.
hmm it still doesn't appear to be bridged?

Lates logs and inis: https://we.tl/t-wIx3y9gFLe

not sure what i'm missing?

On Wed, Jan 30, 2019 at 4:38 PM <mike@...> wrote:
OK - a couple of things... your Analog Bridges need to be uniquely named, and have uniquely named .ini files. The .ini files are different for each as well. Review the Build and Configure sections on blog.927.org for how to create the needed files and tweak the ini files. 

Also - In the log snippet you just posted, P25 is the indicated mode, but you're supplying DMR-ID info. No need to do that for the P25 ini file. 
Also v2.0: The DMR-ID in your log has an extra digit in it - 313666507 - which might be causing the BM master connection issues if that's what you're using elsewhere in the setup. 

On Wed, Jan 30, 2019 at 2:28 PM Russell, KV4S <russelljthomas@...> wrote:
I: 2019-01-30 22:25:57.822 Analog Bridge is starting
M: 2019-01-30 22:25:57.823 Setting [GENERAL] logLevel -> 2
M: 2019-01-30 22:25:57.823 Setting [GENERAL] exportMetadata -> true
M: 2019-01-30 22:25:57.823 Setting [GENERAL] subscriberFile -> /var/lib/dvswitch/subscriber_ids.csv
M: 2019-01-30 22:25:57.823 Setting [GENERAL] decoderFallBack -> true
M: 2019-01-30 22:25:57.823 Setting [GENERAL] useEmulator -> true
M: 2019-01-30 22:25:57.824 Setting [GENERAL] emulatorAddress -> 127.0.0.1:2470
M: 2019-01-30 22:25:57.824 Setting [GENERAL] outputAudioDevice -> /dev/null
M: 2019-01-30 22:25:57.824 Setting [GENERAL] inputAudioDevice -> /dev/null
M: 2019-01-30 22:25:57.824 Setting [GENERAL] useMicrophone -> false
M: 2019-01-30 22:25:57.824 Setting [GENERAL] useVox -> false
M: 2019-01-30 22:25:57.824 Setting [GENERAL] voxDecay -> 2
M: 2019-01-30 22:25:57.824 Setting [GENERAL] voxTrigger -> 200
W: 2019-01-30 22:25:57.824 Using deprecated option "server"
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] server -> 127.0.0.1
W: 2019-01-30 22:25:57.824 Using deprecated option "fromDMRPort"
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] fromDMRPort -> 34100
W: 2019-01-30 22:25:57.824 Using deprecated option "toDMRPort"
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] toDMRPort -> 34103
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] ambeMode -> P25
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] minTxTimeMS -> 2000
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] gatewayDmrId -> 3136665
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] repeaterID -> 313666507
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] txTg -> 31777
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] txTs -> 2
M: 2019-01-30 22:25:57.824 Setting [AMBE_AUDIO] colorCode -> 1
W: 2019-01-30 22:25:57.824 Using deprecated option "server"
M: 2019-01-30 22:25:57.824 Setting [USRP] server -> 127.0.0.1
W: 2019-01-30 22:25:57.824 Using deprecated option "toASLPort"
M: 2019-01-30 22:25:57.824 Setting [USRP] toASLPort -> 34001
W: 2019-01-30 22:25:57.824 Using deprecated option "fromASLPort"
M: 2019-01-30 22:25:57.824 Setting [USRP] fromASLPort -> 32001
M: 2019-01-30 22:25:57.824 Setting [USRP] aslAudio -> AUDIO_USE_GAIN
M: 2019-01-30 22:25:57.824 Setting [USRP] agcGain -> 5.0
M: 2019-01-30 22:25:57.824 Setting [USRP] dmrAudio -> AUDIO_USE_GAIN
M: 2019-01-30 22:25:57.824 Setting [USRP] dmrGain -> 0.17
W: 2019-01-30 22:25:57.824 Using deprecated option "server"
M: 2019-01-30 22:25:57.824 Setting [DV3000] server -> 127.0.0.1
W: 2019-01-30 22:25:57.824 Using deprecated option "port"
M: 2019-01-30 22:25:57.824 Setting [DV3000] port -> 2460
W: 2019-01-30 22:25:57.824 ioctl reset error 
W: 2019-01-30 22:25:57.824 ioctl speed error 
W: 2019-01-30 22:25:57.824 ioctl stereo error 
W: 2019-01-30 22:25:57.824 ioctl setfmt error 
M: 2019-01-30 22:25:57.824 Audio In/Out Device: /dev/null
I: 2019-01-30 22:25:57.824 Open UDP listener on 127.0.0.1:34100
I: 2019-01-30 22:25:57.824 Open USRP on 127.0.0.1:34001
M: 2019-01-30 22:25:57.824 Connecting to DV3000 hardware......
W: 2019-01-30 22:25:58.845 DV3000 not found at 127.0.0.1:2460
I: 2019-01-30 22:25:59.455 Subscriber IDs loaded: 120633
I: 2019-01-30 22:25:59.455 Default extended metadata <K2HZE>
I: 2019-01-30 22:25:59.455 Connecting to emulator on host 127.0.0.1:2470
W: 2019-01-30 22:25:59.455 Using software MBE decoder version 1.2.3
W: 2019-01-30 22:25:59.455 Using software OP25 IMBE/AMBE vocoder
I: 2019-01-30 22:25:59.456 Starting Analog_Bridge --> USRP thread
I: 2019-01-30 22:25:59.459 Open UDP listener on 127.0.0.1:32001
I: 2019-01-30 22:25:59.459 Starting USRP --> IPSC_Bridge thread

On Wed, Jan 30, 2019 at 4:27 PM Russell Thomas <russelljthomas@...> wrote:
never mind, i think I fixed that. 

let me keep testing and see if i get further.

On Wed, Jan 30, 2019 at 4:21 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
great catch i had got interrupted and did not finish setting up the second analog bridge's service file to make it start.
I started it in the foreground and it's getting this?:  2019-01-30 22:16:18.817 Repeater ID can not be the same as subscriber ID

where can i find the P25Hosts.txt and what should it be set to?


On Wed, Jan 30, 2019 at 3:49 PM <mike@...> wrote:
According the logs, you only have one instance of Analog_Bridge running. You need 2. One for DMR and one for P25 (or perhaps didn't include that log)

I also see that you're loading 17 P25 Reflectors. While probably not critical, your P25Hosts.txt only needs the localhost reflector information, as it isn't meant to connect to others... 

Network Access Control (NAC) is analogous to CTCSS for P25. 

On Wed, Jan 30, 2019 at 1:12 PM Russell, KV4S <russelljthomas@...> wrote:
I have been following the blog working on a Bridge for a fellow in NY and I don't think somethings is linked up correctly but nothing is jumping out at me in the logs.

Logs are located here for review: https://we.tl/t-LYRjUm1WpC 

let me know what i'm missing.

Also, what is NAC? 

On Tue, Jan 29, 2019 at 11:30 AM Steve N4IRS <szingman@...> wrote:
Make these both true.

On 1/29/2019 12:19 PM, Kevin N9OIG wrote:
> M: 2019-01-29 17:11:35.760 Setting [GENERAL] decoderFallBack -> false
> M: 2019-01-29 17:11:35.760 Setting [GENERAL] useEmulator -> false







Re: BrandMeister to XLX

Lito - WI6Y
 

Hi Steve, 

Reading through the thread here, would your scenario eliminate the need for an AMBE chip between them then?

Lito

Re: BrandMeister to XLX

Steve N4IRS
 

AMBE chip(s) is needed when bridging 2 unlike modes.
DMR, YSFn, NXDN no vocoder needed between these 3 modes. They are all AMBE
P25 YSFw  no vocoder needed between these 2 modes . They are IMBE
 D-Star needs a vocoder to go to any other mode. D-Star <-> D-Star does not need a vocoder.

Steve 

Re: BrandMeister to XLX

Lito - WI6Y
 

So two channels are required per transcoded module? Is there a way to maximize usage where if a transcoder is free, a module would be able to utilize it?

Re: BrandMeister to XLX

Steve N4IRS
 

Two channels? If you mean 2 instances of Analog_Bridge, yes you need to run an instance for each side of the transcode.
The transcoder above could be reused if the Partner programs (MMDVM_Bridge) disconnects from the transcoder, it could be reused.

All of the connectivity between Partner programs is pretty static due to the the port assignments. That is not to say that scripting could allow you to build up and tear down a connection at will.

Steve

On 2/12/19 7:28 PM, Roselito de los Reyes wrote:
So two channels are required per transcoded module? Is there a way to maximize usage where if a transcoder is free, a module would be able to utilize it?


Re: BrandMeister to XLX

Lito - WI6Y
 

Sorry for the misunderstanding, I’m trying to build bridges between an xlx module to a mode. Like so in the diagram:

Xlx module a <-> dmr


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Tuesday, February 12, 2019 4:39:18 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] BrandMeister to XLX
 
Two channels? If you mean 2 instances of Analog_Bridge, yes you need to run an instance for each side of the transcode.
The transcoder above could be reused if the Partner programs (MMDVM_Bridge) disconnects from the transcoder, it could be reused.

All of the connectivity between Partner programs is pretty static due to the the port assignments. That is not to say that scripting could allow you to build up and tear down a connection at will.

Steve

On 2/12/19 7:28 PM, Roselito de los Reyes wrote:
So two channels are required per transcoded module? Is there a way to maximize usage where if a transcoder is free, a module would be able to utilize it?


Re: BrandMeister to XLX

Steve N4IRS
 

OK,
So my turn for a clarification, is XLX mouule a D-Star or DMR?

On 2/12/19 7:42 PM, Roselito de los Reyes wrote:
Sorry for the misunderstanding, I’m trying to build bridges between an xlx module to a mode. Like so in the diagram:

Xlx module a <-> dmr


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Tuesday, February 12, 2019 4:39:18 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] BrandMeister to XLX
 
Two channels? If you mean 2 instances of Analog_Bridge, yes you need to run an instance for each side of the transcode.
The transcoder above could be reused if the Partner programs (MMDVM_Bridge) disconnects from the transcoder, it could be reused.

All of the connectivity between Partner programs is pretty static due to the the port assignments. That is not to say that scripting could allow you to build up and tear down a connection at will.

Steve

On 2/12/19 7:28 PM, Roselito de los Reyes wrote:
So two channels are required per transcoded module? Is there a way to maximize usage where if a transcoder is free, a module would be able to utilize it?