Date   

Re: DMR Bridge ID

Valentino
 

Pues Carlos, no hay ningun modo. porque tu eres el nodo que haces los enlaces. Echolink es lo mismo. Cuando tu hablas por un nodo Echolink, sal siempre el indicatico del dueño del nodo y nunca el tuyo.

Well Carlos, there is no way. because you are the node that makes the links. Echolink is the same. When you speak for an Echolink node, always leave the indicative of the owner of the node and never yours.


DMR Bridge ID

Carlos Minguela
 

Hi, I currently have a DMR Bridge working very well. I have it linked with Allstar and Echolink. Excellent audio levels. The only problem I'm seeing is that when external users connect to my Allstar or Echolink node, my ID information comes to DMR. There will be some way to create an ID that is called <Call Sign> Bridge or <Call Sign> Multimode in this way when a user uses my Allstar node or Echolink node, does not use my DMR personal ID? Thanks for any help provided.


Re: Problems with DVswiitch installing

Steve N4IRS
 

What distribution? I'm guessing HAMVOIP.



From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Brett.williams via Groups.Io <Brett.williams@...>
Sent: Monday, May 13, 2019 10:32:49 PM
To: main@DVSwitch.groups.io
Subject: [DVSwitch] Problems with DVswiitch installing
 

[Edited Message Follows]

Group I'm trying to build a bridge from ALLSTAR to DMR using DVswitch. . I getting the following error: Can someone help? I'm very frustrated!


-bash: apt-get: command not found
[root@Aurora tmp]# chmod +x install-dvswitch-repo
[root@Aurora tmp]# ./install-dvswitch-repo
./install-dvswitch-repo: line 18: cd: /etc/apt/sources.list.d: No such file or directory
[root@Aurora tmp]# --2019-05-13 20:38:39--  http://dvswitch.org/install-dvswitch-repo
-bash: --2019-05-13: command not found
[root@Aurora tmp]# Resolving dvswitch.org... 44.103.32.18
-bash: Resolving: command not found
[root@Aurora tmp]# Connecting to dvswitch.org|44.103.32.18|:80... connected.
-bash: 44.103.32.18: command not found
-bash: :80...: command not found
-bash: Connecting: command not found
[root@Aurora tmp]# HTTP request sent, awaiting response... 200 OK
-bash: HTTP: command not found
[root@Aurora tmp]# Length: 782
-bash: Length:: command not found
[root@Aurora tmp]# Saving to: `install-dvswitch-repo'
>
> 100%[======================================>] 782         --.-K/s   in 0s
>
> 2019-05-13 20:38:39 (71.8 MB/s) - `install-dvswitch-repo' saved [782/782]
>
> [root@Aurora tmp]# chmod +x install-dvswitch-repo
> [root@Aurora tmp]# ./install-dvswitch-repo
> ./install-dvswitch-repo: line 18: cd: /etc/apt/sources.list.d: No such file or directory
> [root@Aurora tmp]# apt-get update
> -bash: apt-get: command not found
> [root@Aurora tmp]#
> [root@Aurora tmp]# apt-get install analog-bridge
> -bash: apt-get: command not found
> [root@Aurora tmp]# apt-get install mmdvm-bridge
> -bash: apt-get: command not found
> [root@Aurora tmp]# apt-get install md380-emu


Problems with DVswiitch installing

Brett KB5YZB
 
Edited

Group I'm trying to build a bridge from ALLSTAR to DMR using DVswitch. . I getting the following error: Can someone help? I'm very frustrated!


-bash: apt-get: command not found
[root@Aurora tmp]# chmod +x install-dvswitch-repo
[root@Aurora tmp]# ./install-dvswitch-repo
./install-dvswitch-repo: line 18: cd: /etc/apt/sources.list.d: No such file or directory
[root@Aurora tmp]# --2019-05-13 20:38:39--  http://dvswitch.org/install-dvswitch-repo
-bash: --2019-05-13: command not found
[root@Aurora tmp]# Resolving dvswitch.org... 44.103.32.18
-bash: Resolving: command not found
[root@Aurora tmp]# Connecting to dvswitch.org|44.103.32.18|:80... connected.
-bash: 44.103.32.18: command not found
-bash: :80...: command not found
-bash: Connecting: command not found
[root@Aurora tmp]# HTTP request sent, awaiting response... 200 OK
-bash: HTTP: command not found
[root@Aurora tmp]# Length: 782
-bash: Length:: command not found
[root@Aurora tmp]# Saving to: `install-dvswitch-repo'
>
> 100%[======================================>] 782         --.-K/s   in 0s
>
> 2019-05-13 20:38:39 (71.8 MB/s) - `install-dvswitch-repo' saved [782/782]
>
> [root@Aurora tmp]# chmod +x install-dvswitch-repo
> [root@Aurora tmp]# ./install-dvswitch-repo
> ./install-dvswitch-repo: line 18: cd: /etc/apt/sources.list.d: No such file or directory
> [root@Aurora tmp]# apt-get update
> -bash: apt-get: command not found
> [root@Aurora tmp]#
> [root@Aurora tmp]# apt-get install analog-bridge
> -bash: apt-get: command not found
> [root@Aurora tmp]# apt-get install mmdvm-bridge
> -bash: apt-get: command not found
> [root@Aurora tmp]# apt-get install md380-emu


Re: Invalid Syntax

Albert Lawson
 

I think I do….see attached for a screenshot of my OPT directory…

 

73’s

 

Albert

WB7AWL

 

 

From: main@dvswitch.groups.io [mailto:main@dvswitch.groups.io] On Behalf Of Corey Dean N3FE
Sent: Sunday, May 12, 2019 6:53 PM
To: main@dvswitch.groups.io
Subject: Re: [DVSwitch] Invalid Syntax

 

You have dmr_itils loaded?   Do a pip install dmr_utils

 

 

On Sun, May 12, 2019 at 9:05 PM Albert Lawson <wb7awl@...> wrote:

See attached….

 

I’m baffled….

 

73’s

 

Albert

WB7AWL

 

From: main@DVSwitch.groups.io [mailto:main@DVSwitch.groups.io] On Behalf Of Steve KC1AWV
Sent: Sunday, May 12, 2019 6:02 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] Invalid Syntax

 

I don't think so, the code base is still calling env python.

Try running dmrlink with python instead of python3. python is Python 2, python3 is Python 3.


Re: Invalid Syntax

Corey Dean N3FE <n3fe@...>
 

You have dmr_itils loaded?   Do a pip install dmr_utils


On Sun, May 12, 2019 at 9:05 PM Albert Lawson <wb7awl@...> wrote:

See attached….

 

I’m baffled….

 

73’s

 

Albert

WB7AWL

 

From: main@DVSwitch.groups.io [mailto:main@DVSwitch.groups.io] On Behalf Of Steve KC1AWV
Sent: Sunday, May 12, 2019 6:02 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] Invalid Syntax

 

I don't think so, the code base is still calling env python.

Try running dmrlink with python instead of python3. python is Python 2, python3 is Python 3.


Re: Invalid Syntax

Albert Lawson
 

Steve,

 

See the attached.  I think I’m about ready to roll back my VM to the original snapshot and try again.  I was looking to upgrade HBlink to HBlink3, and wanted to add an IPSC master at the same time.  It’s possible I got ahead of myself….!!!!

 

73’s

 

Albert

WB7AWL

 

 

From: main@DVSwitch.groups.io [mailto:main@DVSwitch.groups.io] On Behalf Of Steve KC1AWV
Sent: Sunday, May 12, 2019 6:09 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] Invalid Syntax

 

[Edited Message Follows]

No module named dmr_utils means that dmr_utils isn't installed. If you have pip installed, try pip install dmr_utils.

Better off yet, to make sure you have all modules that are required installed, run pip install -r requirements.txt


Re: Invalid Syntax

Steve KC1AWV
 
Edited

No module named dmr_utils means that dmr_utils isn't installed. If you have pip installed, try pip install dmr_utils.

Better off yet, to make sure you have all modules that are required installed, run pip install -r requirements.txt


Re: Invalid Syntax

Albert Lawson
 

See attached….

 

I’m baffled….

 

73’s

 

Albert

WB7AWL

 

From: main@DVSwitch.groups.io [mailto:main@DVSwitch.groups.io] On Behalf Of Steve KC1AWV
Sent: Sunday, May 12, 2019 6:02 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] Invalid Syntax

 

I don't think so, the code base is still calling env python.

Try running dmrlink with python instead of python3. python is Python 2, python3 is Python 3.


Re: Invalid Syntax

Steve KC1AWV
 

I don't think so, the code base is still calling env python.

Try running dmrlink with python instead of python3. python is Python 2, python3 is Python 3.


Re: Invalid Syntax

Corey Dean N3FE <n3fe@...>
 

Is dmrlink even potted over to python3?  It may have been and I just missed it.  What happens if you just run python instead of pyhon3?

On Sun, May 12, 2019 at 8:57 PM Albert Lawson <wb7awl@...> wrote:

Hi Guys,

 

See the attached screen shot.  This is what I’m getting when I try to run dmrlink…

 

Any thoughts…???

 

73’s

 

Albert

WB7AWL

 


Invalid Syntax

Albert Lawson
 

Hi Guys,

 

See the attached screen shot.  This is what I’m getting when I try to run dmrlink…

 

Any thoughts…???

 

73’s

 

Albert

WB7AWL

 


Re: Dv switch

Phil, G7OEA
 
Edited

Hi Mayfuse, 
As Steve said you need to set up an allstar node. 

To do this you first need to apply for a node number from allstar link. once you have that you need to create a server on the allstar link page and then associate your node number to that server. 

As this is your first node don't change the iax port that is suggested on the server setup page.  make a note of the iax port node number and node password.

to build the node you will need a raspberry pi, a SD card and an allstar image. Get the allstar image from hamvoip.org and follow the instructions on the download page. you will need win23disk imager to write the  image to the SD card. a link to this is on the hamvoip.org download page.

Once the image is on the SD card  plug the raspberry pi into a monitor and add a keyboard an mouse. 

Follow the setup instructions. you can ignore the usb audio config as your not plugging in a radio. if you only have a Wi-Fi connection you can go back and configure the wi-fi once the wizard has finished.

I would advise you download a program called WinSCP. this will let you edit the config files more easily.  

To configure the raspberry pi to accept connections from DV switch go to https://dvswitch.groups.io/g/Mobile/wiki/AllStarLink-setup-for-DVSwitch-Mobile

You will ned to edit iax.conf and extensions.conf. everything in [iaxclient] goes in the iax.conf file. Add it to the bottom of the file. in extensions.conf you will see NODE=1999. change 1999 for your node number. next scroll to the bottom of extensions.conf and add everything under [iax-client]. save both of these files and restart.

to configure DV Switch enter the following. 

in accounts
host name - ip address of your raspberry pi. 
port - your iax port number
username - iaxclient
password - this is whaterver you set "secret" to in iax.conf
caller - ID your callsign
caller number leave blank
node - your node number

put a tick in autoload node

codec type - server selected.

in config if you want to user the up volume key for a ptt button enter the code 24. I you have the free version this wont save but the full app only costs $1.87

It is a great app that does work. I would suggest also reading through the wiki https://wiki.allstarlink.org/wiki/Main_Page

Phil


Re: Dv switch

Steve KC1AWV
 
Edited

What you're seeing is whether or not the DVSwitch mobile app is registered to an Allstar node. The app has nothing to do with the allstarlink.org website. You first need to set up an Allstar node or an Analog_Bridge, then enter the account information into the DVSwitch app. Once the account connects successfully to the node, then you will be 'registered'.

The Unregistered notification you're seeing only indicates whether or not the app is able to connect to a node, set up in the Accounts tab.

Steve KC1AWV


Dv switch

Mahefuze Moosa
 

Hello again I have registed on the all star web page which I received a validation email can someone show me how to activate it and start using the dvswitch on my Samsung s7 as when I click the app it still shows as unregistered sorry for being a pain are  there any setting i have to put in the config and account settings before use I am asking to be helped.
Thank you
Mayfuse 


Dvswitch

Mahefuze Moosa
 

Hello again I have registed on the all star web page which I received a validation email can someone show me how to activate it and start using the dvswitch on my Samsung s7 as when I click the app it still shows as unregistered sorry for being a pain are  there any setting i have to put in the config and account settings before use I am asking to be helped.
Thank you
Mayfuse 


Re: Dvswitch registration

Mahefuze Moosa
 

Ok thank you I have registed on the all-star web page now just waiting confirmation 


On Sat, 11 May 2019, 13:00 Steve N4IRS, <szingman@...> wrote:
The register button on the Dialer screen is used once you have a account setup. It is used to register the mobile app with your AllStar server.

73, Steve N4IRS

On 5/11/2019 6:34 AM, Mahefuze Moosa wrote:
Hello every one I have downloaded dvswitch from Google play installed it but when I click register nothing happens can anyone advise how to get it working 


Re: Dvswitch registration

Steve N4IRS
 

The register button on the Dialer screen is used once you have a account setup. It is used to register the mobile app with your AllStar server.

73, Steve N4IRS

On 5/11/2019 6:34 AM, Mahefuze Moosa wrote:
Hello every one I have downloaded dvswitch from Google play installed it but when I click register nothing happens can anyone advise how to get it working 


Dvswitch registration

Mahefuze Moosa
 

Hello every one I have downloaded dvswitch from Google play installed it but when I click register nothing happens can anyone advise how to get it working 


Re: additional questions around dvswitch

JJ Cummings
 

I run three instances of md380-emu and then also a hardware AMBE chip on a single raspi 3 without issue.. each instance is a single transcode channel pair.


On Fri, May 10, 2019 at 4:34 AM Heiko DL1BZ <dg2dra@...> wrote:

For a bigger project around digital voice in Germany and put them all together my part was the implementation of P25. All worked like a charm, here ist what I done:

P25reflector<->P25gateway<->mmdvm_bridge_1_PartP25<->analog_bridge_P25<->analog_bridge_DMR<->mmdvm_bridge_1_PartDMR<->hblink3_1<->ysf2dmr<->YSFreflector_1
                                                        |<-----> md380-emu<---->|               RPT & HS access area 1 <->|<-> OpenBridge between 2 hblink3_1 and hblink3_2
                                                                                                                      hblink3_2
                                                                                                RPT & HS access area 2 <->|<->ysf2dmr<->YSFreflector_2

The decision for transcoding was because I need YSF-N and DMR <->P25 at the same time. All works great and stable, no problems at the moment. I think I understand the whole concept and the configuration behind dvswitch.
Now my additional questions. How much "channels" can be used at the same time with the md380-emu ? Only one combination of 2 modes for one instance of md380-emu or is it possible to do more ? (I mean 2x2 analog_bridges). Or I need more instances of the md380-emu with different ports for this ? I'm not sure yet.

 

73 Heiko, DL1BZ

5901 - 5920 of 9814