Date   

Re: DVMega AMBE3000

Steve N4IRS
 

I just had a idea I want to check before we call it a no go.

On 8/25/2017 9:46 AM, Matthew 2E0SIP wrote:

Hi Guys,

If it doesn't work out the box it's probably not worth spending more time on it, I was just curious as the DVMEGA AMBE 3000 is about the same cost as the ThumbDV.

I will grab a ThumbDV instead.

Thanks for investigating.



Re: DVMega AMBE3000

Matthew 2E0SIP
 

Hi Guys,

If it doesn't work out the box it's probably not worth spending more time on it, I was just curious as the DVMEGA AMBE 3000 is about the same cost as the ThumbDV.

I will grab a ThumbDV instead.

Thanks for investigating.


Re: Bug fix and other changes.

Will - N7DUD
 

Thanks for your work on this project and the bug fix!

I just wanted to let you know that your work is helping a (very active) search & rescue group communicate when outside of the range of RF sites.
It also helps one of our dispatchers (me) stay active even after moving out of the state.

Openspot (AK) -> DCI PNW C-Bridge (Thanks Mike! NO7RF) -> N-Oregon DMR Repeater System 

Thanks again!
Will - N7DUD - www.MWave.org


Re: DVMega AMBE3000

G7RPG - Peter Kendall
 

Hi Steve,

Did it turn out to be a case of "Computers Says No" ?


Peter


On 24/08/2017 18:09, Steve N4IRS wrote:
Well,
At least I'm getting data back from the AMBE3000 but it's not right. looking at the log.

Steve

On 8/24/2017 12:20 PM, G7RPG - Peter Kendall wrote:

Steve,

Just plugged it in now.


Peter


On 24/08/2017 17:14, Steve N4IRS wrote:
Peter,
I am at my desk today. If you want to put the AMBE3000 on a carrier board, I'll give it another try.

Steve




Re: DVMega AMBE3000

Steve N4IRS
 

Well,
At least I'm getting data back from the AMBE3000 but it's not right. looking at the log.

Steve

On 8/24/2017 12:20 PM, G7RPG - Peter Kendall wrote:

Steve,

Just plugged it in now.


Peter


On 24/08/2017 17:14, Steve N4IRS wrote:
Peter,
I am at my desk today. If you want to put the AMBE3000 on a carrier board, I'll give it another try.

Steve



Re: DVMega AMBE3000

G7RPG - Peter Kendall
 

Steve,

Just plugged it in now.


Peter


On 24/08/2017 17:14, Steve N4IRS wrote:
Peter,
I am at my desk today. If you want to put the AMBE3000 on a carrier board, I'll give it another try.

Steve


Re: DVMega AMBE3000

Steve N4IRS
 

Peter,
I am at my desk today. If you want to put the AMBE3000 on a carrier board, I'll give it another try.

Steve


Bug fix and other changes.

Steve N4IRS
 
Edited

Over the last few days, Cort identified a bug when OpenSpot was communicating with HBlink / HB_Bridge. Mike created a fix that has been tested and looks like it solves the issue. I have uploaded the change to the dmr_utils repository.
I suggest people do a git pull on the dmr_utils repository and then run the install.sh script. Please report here any issues you encounter. We would rather not have to chase down people experiencing a problem without reporting it to us.

Cort has decided a simplification of the repositories are in order. We will be moving some of the older, unused or superseded applications into a separate directories. This should alleviate some of the confusion new users are experiencing.
We will be making some changes in HBlink to better align it with the structure of DMRlink. In simple terms, reducing the number of small sub applications (my term) required to bring up a HBlink application. As we move forward there will be a effort to create a more unified environment.

Mike and I spoke about the issue that require people to use DMRGateway as a "shim" between HB_Bridge and XLX. We think this can be resolved with a pull request to the XLX repository. Stay tuned.

73, Steve N4IRS 
.


Re: DVMega AMBE3000

G7RPG - Peter Kendall
 

Matthew, this is the carrier board if you've not seen one, its a USB to serial converter.

http://www.combitronics.nl/index.php?route=product/product&path=61&product_id=90


On 23/08/2017 15:02, Matthew 2E0SIP wrote:

Steve - The DVMega AMBE3000 initially came out as a 'shield' that would sit on an Arduino, with an additional audio board so you could plug in a mic / speaker and hold a QSO over a D-Star(?) network via a PC without any local RF.

The next evolution was the 'carrier board' which  removed the requirement for the Arduino , and meant you could plug it directly into a PC and use the PC sound card rather than the additional audio board + Arduino.


Peter - does it look like the carrier board is doing anything other than converting USB to serial?  If not, then hopefully Analog_Bridge can interface with it directly. If there is an additional microcontroller it might be best going straight into the AMBE3000 with a serial adapter

Cheers all for taking an interest in this, much appreciated.



Re: DVMega AMBE3000

Matthew 2E0SIP
 

Steve - The DVMega AMBE3000 initially came out as a 'shield' that would sit on an Arduino, with an additional audio board so you could plug in a mic / speaker and hold a QSO over a D-Star(?) network via a PC without any local RF.

The next evolution was the 'carrier board' which  removed the requirement for the Arduino , and meant you could plug it directly into a PC and use the PC sound card rather than the additional audio board + Arduino.


Peter - does it look like the carrier board is doing anything other than converting USB to serial?  If not, then hopefully Analog_Bridge can interface with it directly. If there is an additional microcontroller it might be best going straight into the AMBE3000 with a serial adapter

Cheers all for taking an interest in this, much appreciated.


Re: DVMega AMBE3000

G7RPG - Peter Kendall
 

Steve, do you want to try with it on the carrier board ?

On 23/08/2017 13:41, Steve N4IRS wrote:
Can anyone point me to the information on the differences between on a
DVMega vs a carrier board?

Steve


Re: DVMega AMBE3000

Steve N4IRS
 

Can anyone point me to the information on the differences between on a DVMega vs a carrier board?

Steve

--
"What are HB_bridge, IPSC_bridge and Analog_bridge?"


Re: DVMega AMBE3000

Mike Zingman - N4IRR
 

What is the port name for the serial device?  /dev/ttyUSBx, /dev/ttyAMA0, something else?


Re: DVMega AMBE3000

G7RPG - Peter Kendall
 

It was sitting on an Arduino MEGA, I also have the carrier board.


On 22/08/2017 15:03, Matthew 2E0SIP wrote:
Hi All,
Guss got back to me and confirmed-
The ambe board is designed to communicate accordingly to the DVSI spec.
So hopefully it can be made to work. 

Out of curiosity Peter, were you interfacing with the AMBE directly via serial, or via the carrier board? 

Cheers
Matthew 


Re: DVMega AMBE3000

Steve N4IRS
 

I did try yesterday to communicate with Peter's install at both 115200 and 230400. I was unable to communicate. I "assume" since it was on USB1 it was the carrier board.
We need to do more looking at DummyRepeater since it supports both the ThumDV and Guus board.

Steve

On 8/22/2017 10:03 AM, Matthew 2E0SIP wrote:
Hi All,
Guss got back to me and confirmed-
The ambe board is designed to communicate accordingly to the DVSI spec.
So hopefully it can be made to work. 

Out of curiosity Peter, were you interfacing with the AMBE directly via serial, or via the carrier board? 

Cheers
Matthew 


Re: DVMega AMBE3000

Matthew 2E0SIP
 

Hi All,
Guss got back to me and confirmed-
The ambe board is designed to communicate accordingly to the DVSI spec.
So hopefully it can be made to work. 

Out of curiosity Peter, were you interfacing with the AMBE directly via serial, or via the carrier board? 

Cheers
Matthew 


Re: DVMega AMBE3000

G7RPG - Peter Kendall
 

Steve,

Yes no problem, I can plug it into the same box as the the current 3000USB >asl.

I'll set it up and send you the details for you to have play tomorrow.

Peter



On 20/08/2017 21:54, Steve N4IRS wrote:
I would love to trouble shoot it. Any possibility I could log into the machine with the hardware installed?

Steve

On 08/20/2017 04:53 PM, G7RPG - Peter Kendall wrote:

Matt & Steve, I've tried it and it doesn't work.


On 20/08/2017 20:39, Steve N4IRS wrote:
Matthew,
I do not know of anyone that has tried it. Yes, you should be OK if you can talk to the the AMBE chip. AMBEtest4.py should work.

Steve

On 08/20/2017 03:34 PM, Matthew 2E0SIP wrote:

Hi All,

Does anyone know if the DVMEGA AMBE3000 boards will work with Analog_Bridge?

If it's untested, what does the AMBE3000 board need to expose to Analog_Bridge in order to work? The raw serial interface from the AMBE chip? 

Thanks

Matthew
2E0SIP






Re: DVMega AMBE3000

Matthew 2E0SIP
 

Thanks for confirmation Peter. 

You never know, Guss might be interested in putting in an analog_bridge mode if only minimal software changes are required.

Cheers both


Re: DVMega AMBE3000

Steve N4IRS
 

I would love to trouble shoot it. Any possibility I could log into the machine with the hardware installed?

Steve

On 08/20/2017 04:53 PM, G7RPG - Peter Kendall wrote:

Matt & Steve, I've tried it and it doesn't work.


On 20/08/2017 20:39, Steve N4IRS wrote:
Matthew,
I do not know of anyone that has tried it. Yes, you should be OK if you can talk to the the AMBE chip. AMBEtest4.py should work.

Steve

On 08/20/2017 03:34 PM, Matthew 2E0SIP wrote:

Hi All,

Does anyone know if the DVMEGA AMBE3000 boards will work with Analog_Bridge?

If it's untested, what does the AMBE3000 board need to expose to Analog_Bridge in order to work? The raw serial interface from the AMBE chip? 

Thanks

Matthew
2E0SIP





Re: DVMega AMBE3000

G7RPG - Peter Kendall
 

Matt & Steve, I've tried it and it doesn't work.


On 20/08/2017 20:39, Steve N4IRS wrote:
Matthew,
I do not know of anyone that has tried it. Yes, you should be OK if you can talk to the the AMBE chip. AMBEtest4.py should work.

Steve

On 08/20/2017 03:34 PM, Matthew 2E0SIP wrote:

Hi All,

Does anyone know if the DVMEGA AMBE3000 boards will work with Analog_Bridge?

If it's untested, what does the AMBE3000 board need to expose to Analog_Bridge in order to work? The raw serial interface from the AMBE chip? 

Thanks

Matthew
2E0SIP



9761 - 9780 of 10158