Date   

Some digital gear FS

Bob N1XBM <N1XBM@...>
 

I have a pi zero with the mmdvm hat I used pi star with. I also have a arduino with the mmdvm and the TXCO. Everything works I'm just not doing anything with it and would like to send the stuff down the road and put the money into current ham projects. Is there any interest? I can get more specifics if people want this stuff. I haven't even considered price yet, but I'd sell for what ever fair market value is.

N1XBM
Apparare Scientor
Paratus Communicare
www.n1xbm.com


Re: Just Moved server from Digital Ocean and now server won't run

N9UMJ
 

Hi Mike

Ubuntu 18.04


On Sun, Jun 16, 2019 at 12:20 PM Mike KB8JNM <groupio@...> wrote:

What OS and kernel version ?

On 6/16/2019 12:03 PM, N9UMJ wrote:
I just moved all of the DvSwitch files and server configurations away from Digital Ocean to a new VPS and can't get it to run, All of the ports have been configut=red on the firewall as the working version of DO, I was wondering if someone could give me some tips on what it might be or would be will to take a look see and see if I may have missed something

Thanks
Rick n9umj


Re: Just Moved server from Digital Ocean and now server won't run

N9UMJ
 

Hi Steve

Mainly the YSF Reflector, Everything else is pointed to Brandmeister for transcoding to our 31188 talkgroup.
It was originally setup for me by Alec N1AJW , But Alec has other irons in the fire now an commited to those prjects.
I need to get it running off of Digital Ocean so Brandmeister will accept my feed.

My utimate goal wthis fall when my work load slows down is to place it on our own server at a fiber hub and do all of our transcoding and routing through DV_Switch, as for now I have very limited time with work and travel, I just need to make it usable again at the new VPS until time allows, I'm also very interested in the DV mobile but that wil also be later when time allows.

I enjoyed talking to you at Hamvention,I found it very enlightening and exciting with all of the new features and looking forward to dedicating my time to learn more later this year

Rick n9umj


On Sun, Jun 16, 2019 at 12:04 PM Steve N4IRS <szingman@...> wrote:
What does not run?

On 6/16/19 12:03 PM, N9UMJ wrote:
I just moved all of the DvSwitch files and server configurations away from Digital Ocean to a new VPS and can't get it to run, All of the ports have been configut=red on the firewall as the working version of DO, I was wondering if someone could give me some tips on what it might be or would be will to take a look see and see if I may have missed something

Thanks
Rick n9umj


Re: Dummy Repeater and All Star Link

Ryan Collier
 

So i am pulling my hair out.

Is this normal?
Open network connection to USRP
setTransmit called but nothing done. state=0, ttp=0

Dummyrepeater config is pointing to the IP address of ASL
ASL is point to Dummyrepeater ip address


Re: Just Moved server from Digital Ocean and now server won't run

Mike KB8JNM
 

What OS and kernel version ?

On 6/16/2019 12:03 PM, N9UMJ wrote:
I just moved all of the DvSwitch files and server configurations away from Digital Ocean to a new VPS and can't get it to run, All of the ports have been configut=red on the firewall as the working version of DO, I was wondering if someone could give me some tips on what it might be or would be will to take a look see and see if I may have missed something

Thanks
Rick n9umj


Re: Just Moved server from Digital Ocean and now server won't run

Steve N4IRS
 

What does not run?

On 6/16/19 12:03 PM, N9UMJ wrote:
I just moved all of the DvSwitch files and server configurations away from Digital Ocean to a new VPS and can't get it to run, All of the ports have been configut=red on the firewall as the working version of DO, I was wondering if someone could give me some tips on what it might be or would be will to take a look see and see if I may have missed something

Thanks
Rick n9umj


Just Moved server from Digital Ocean and now server won't run

N9UMJ
 

I just moved all of the DvSwitch files and server configurations away from Digital Ocean to a new VPS and can't get it to run, All of the ports have been configut=red on the firewall as the working version of DO, I was wondering if someone could give me some tips on what it might be or would be will to take a look see and see if I may have missed something

Thanks
Rick n9umj


Re: code=exited, status=203/EXEC

Chris WB4ULK
 

That was the problem. My old installation must have been 32 bit. When I spun up the new server it is 64 bit.
I just copied over the entire folder for each instance to get the config files. The problem was, pulled over the executables as well.
Lesson learned. Hope this helps someone else in the future.

Thanks Steve!


Re: code=exited, status=203/EXEC

Chris WB4ULK
 

Derp DE DER!


Re: code=exited, status=203/EXEC

Chris WB4ULK
 

Ok. Let me start fresh and I will only copy over the INI's. I just copied the entire folders for Analog_Bridge, md380 and MMDVM_Bridge from my old server last time.


Re: code=exited, status=203/EXEC

Steve N4IRS
 

In general, when building a new system, you should install fresh from apt and ONLY overwrite config files.

On 6/15/19 3:15 PM, Chris WB4ULK via Groups.Io wrote:
So I should rebuild and then only bring over the INI files and leave the EXE as is?


Re: code=exited, status=203/EXEC

Steve N4IRS
 

If you overwrote the 64 bit executables with 32 bit executables, that is your problem.

On 6/15/19 3:15 PM, Chris WB4ULK via Groups.Io wrote:
So I should rebuild and then only bring over the INI files and leave the EXE as is?


Re: code=exited, status=203/EXEC

Steve N4IRS
 

It looks like you installed the 32 bit binaries on a 64 bit system.

On 6/15/19 3:12 PM, Chris WB4ULK via Groups.Io wrote:
Other words,
Do I need to build from scratch and enter my configs manually instead of just dropping the existing configs over from the old box?


Re: code=exited, status=203/EXEC

Chris WB4ULK
 

So I should rebuild and then only bring over the INI files and leave the EXE as is?


Re: code=exited, status=203/EXEC

Steve N4IRS
 

The config files do not care about 32 or 64. The executable is not running.

On 6/15/19 3:11 PM, Chris WB4ULK via Groups.Io wrote:
Did I download the wrong repo or something?

I just started a new box of Debian 9 Stretch on another service. Then I installed the repos and the packages.
Do my config files refer to x64 and x32?


Re: code=exited, status=203/EXEC

Chris WB4ULK
 

Other words,
Do I need to build from scratch and enter my configs manually instead of just dropping the existing configs over from the old box?


Re: code=exited, status=203/EXEC

Chris WB4ULK
 

Did I download the wrong repo or something?

I just started a new box of Debian 9 Stretch on another service. Then I installed the repos and the packages.
Do my config files refer to x64 and x32?


Re: code=exited, status=203/EXEC

Steve N4IRS
 

Looks like you went from 32 bit Linux to 64 bit.

On 6/15/19 3:07 PM, Chris WB4ULK via Groups.Io wrote:
root@dmrbridge:/opt/Analog_Bridge# file Analog_Bridge
Analog_Bridge: ELF 32-bit LSB executable, Intel 80386, version 1 (GNU/Linux), dynamically linked, interpreter /lib/ld-linux.so.2, for GNU/Linux 2.6.32, BuildID[sha1]=c629e5ca13f841ceae4a682d947fd0ece3d83d8d, not stripped
root@dmrbridge:/opt/Analog_Bridge# uname -a
Linux dmrbridge 4.9.0-9-amd64 #1 SMP Debian 4.9.168-1+deb9u2 (2019-05-13) x86_64 GNU/Linux
root@dmrbridge:/opt/Analog_Bridge#




Re: code=exited, status=203/EXEC

Chris WB4ULK
 

root@dmrbridge:/opt/Analog_Bridge# file Analog_Bridge
Analog_Bridge: ELF 32-bit LSB executable, Intel 80386, version 1 (GNU/Linux), dynamically linked, interpreter /lib/ld-linux.so.2, for GNU/Linux 2.6.32, BuildID[sha1]=c629e5ca13f841ceae4a682d947fd0ece3d83d8d, not stripped
root@dmrbridge:/opt/Analog_Bridge# uname -a
Linux dmrbridge 4.9.0-9-amd64 #1 SMP Debian 4.9.168-1+deb9u2 (2019-05-13) x86_64 GNU/Linux
root@dmrbridge:/opt/Analog_Bridge#



Re: code=exited, status=203/EXEC

Chris WB4ULK
 

WAIT! I did chmod 777 on those, instead of 755.
Permissions could be my issue?

5781 - 5800 of 9882