Date   

Re: HBmonitor and XLXPEERS support

SP2ONG Waldek
 

but still is not solved problem with one frame send from XLX to HBLink after finish transmission users 

https://dvswitch.groups.io/g/HBlink/topic/32158218#442

This problem with the last UDP frame from XLX will remain a red background on the XLX status link in HBmon.

I try to understand xlx sources with mmdvm protocol where we can disable send this but at current it is for me is to the difficult task
https://github.com/LX3JL/xlxd/blob/master/src/cdmrmmdvmprotocol.cpp

According to my personal opinion, hbmonitor is a very important and useful tool for monitoring HBlink, for people who do not know HBlink well internally and are not able to analyze hblink logs


Re: HBmonitor and XLXPEERS support

Steve N4IRS
 

You won't know until you try submitting the patch.

On 7/26/19 6:10 AM, Waldek SP2ONG wrote:
Steve,

I have put this info in the generall discussion because HBmonitor is always controversial ;-)

I am not an advanced programmer and I don't know that Cort will accept this patch.

I have put patched HBMonitor in my fork:

https://github.com/sp2ong/HBmonitor



Re: HBmonitor and XLXPEERS support

SP2ONG Waldek
 

Steve,

I have put this info in the generall discussion because HBmonitor is always controversial ;-)

I am not an advanced programmer and I don't know that Cort will accept this patch.

I have put patched HBMonitor in my fork:

https://github.com/sp2ong/HBmonitor


Re: HBmonitor and XLXPEERS support

Steve N4IRS
 

Would this not be better as a pull request and in the HBlink subgroup?

On 7/26/19 4:33 AM, Waldek SP2ONG wrote:
Hi,

As an attachment, you can find my simple patch to original HBmonitor  which allow display XLXPEERS link in HBmonitor

73 Waldek


Re: HBmonitor and XLXPEERS support

EA4GAX - Sergio
 

Great!! Good job. It interesting, I'll test It.
Thank you.


Re: HBmonitor and XLXPEERS support

EA5GVK Joaquin
 

Ok, well work. Fantastic.
Many thanks

El vie., 26 jul. 2019 a las 10:33, Waldek SP2ONG (<sp2ong@...>) escribió:
Hi,

As an attachment, you can find my simple patch to original HBmonitor  which allow display XLXPEERS link in HBmonitor

73 Waldek


HBmonitor and XLXPEERS support

SP2ONG Waldek
 

Hi,

As an attachment, you can find my simple patch to original HBmonitor  which allow display XLXPEERS link in HBmonitor

73 Waldek


Re: HBlink rules.py

Carlos Minguela
 

Hi Corey:

I just submit a ticket making the request.

Thanks


Re: DMR Master Disconnects

John - WB5NFC <wb5nfc@...>
 

Helps immensely. Thank you.


On Jul 24, 2019, at 4:44 PM, Steve N4IRS <szingman@...> wrote:

John,
As Curt explained the install set up MMDVM_Bridge (and others) to start at boot. There will be times when you need to run in the foreground and all you need to do is make sure you are the only running copy unless you are running a more complex bridge.

systemctl has 6 commands you will want to know off the top of your head and quite a few more that -h or man systemctl will show you.

systemctl start mmdvm_bridge    # Start the mmdvm_bridge service
systemctl status mmdvm_bridge  # check the status of the mmdvm_bridge service. Is it running? is it enabled? any errors?
systemctl stop mmdvm_bridge     # stop the service IF it is running
systemctl restart mmdvm_bridge # restart the service (will also start it if not running) good for re-reading the config files.
systemctl enable mmdvm_bridge # setup the service to start at boot
systemctl disable mmdvm_bridge # stop the service from running at boot.

The 3 big ones for you with a running bridge are stop, start and status. Always check the status before running in the foreground.

Hope this helps,
Steve N4IRS 

On 7/24/19 5:03 PM, John - WB5NFC wrote:
Gentleman, thank you for identifying the source of my self-inflicted headache! Now that only one instance is running, there are no login/logout errors.

In trying to remember when or how I got into this twofer mess, I remember seeing the list of useful commands at the end of the setup document and trying them out. I just "assumed" anything started would reset after a boot. That little word sure gets people in trouble... thanks again, guys.


Re: DMR Master Disconnects

Steve N4IRS
 

John,
As Curt explained the install set up MMDVM_Bridge (and others) to start at boot. There will be times when you need to run in the foreground and all you need to do is make sure you are the only running copy unless you are running a more complex bridge.

systemctl has 6 commands you will want to know off the top of your head and quite a few more that -h or man systemctl will show you.

systemctl start mmdvm_bridge    # Start the mmdvm_bridge service
systemctl status mmdvm_bridge  # check the status of the mmdvm_bridge service. Is it running? is it enabled? any errors?
systemctl stop mmdvm_bridge     # stop the service IF it is running
systemctl restart mmdvm_bridge # restart the service (will also start it if not running) good for re-reading the config files.
systemctl enable mmdvm_bridge # setup the service to start at boot
systemctl disable mmdvm_bridge # stop the service from running at boot.

The 3 big ones for you with a running bridge are stop, start and status. Always check the status before running in the foreground.

Hope this helps,
Steve N4IRS 

On 7/24/19 5:03 PM, John - WB5NFC wrote:
Gentleman, thank you for identifying the source of my self-inflicted headache! Now that only one instance is running, there are no login/logout errors.

In trying to remember when or how I got into this twofer mess, I remember seeing the list of useful commands at the end of the setup document and trying them out. I just "assumed" anything started would reset after a boot. That little word sure gets people in trouble... thanks again, guys.


Re: DMR Master Disconnects

John - WB5NFC <wb5nfc@...>
 

Gentleman, thank you for identifying the source of my self-inflicted headache! Now that only one instance is running, there are no login/logout errors.

In trying to remember when or how I got into this twofer mess, I remember seeing the list of useful commands at the end of the setup document and trying them out. I just "assumed" anything started would reset after a boot. That little word sure gets people in trouble... thanks again, guys.


Re: DMR Master Disconnects

Curt Hart <curtg49@...>
 

John,
it's starting at boot because the service is enabled. if you don't want it to start at boot systemctl disable mmdvm_bridge or after you've made changes systemctl restart mmdvm_bridge.
See systemctl --help
Hope this helps,
Curtis - N9INK

On Wednesday, July 24, 2019, 3:14:10 PM CDT, John - WB5NFC <wb5nfc@...> wrote:


I believe you're right on target, as usual! Time permitting,  educate me a little (or a LOT), please...

I didn't understand what I was seeing with the ps ax | grep MMDVM command.

root@WB5NFC-2186:/opt/MMDVM_Bridge#  ps ax | grep MMDVM
  668 ?        Ss     0:01 /opt/MMDVM_Bridge/MMDVM_Bridge /opt/MMDVM_Bridge/MMDVM_Bridge.ini
 1265 pts/0    S+     0:00 grep MMDVM

So I ran systemctl status mmdvm_bridge

● mmdvm_bridge.service - MMDVM_Bridge Service
   Loaded: loaded (/lib/systemd/system/mmdvm_bridge.service; enabled; vendor preset: enabled
   Active: active (running) since Wed 2019-07-24 13:51:14 CDT; 34min ago
 Main PID: 661 (MMDVM_Bridge)
   CGroup: /system.slice/mmdvm_bridge.service
           └─661 /opt/MMDVM_Bridge/MMDVM_Bridge /opt/MMDVM_Bridge/MMDVM_Bridge.ini

Which I think... tells me, yes dummy, it's already running and there's your problem.  How I started it at boot and now how I keep it from starting at every boot (while testing) are questions I can't answer.....


Re: DMR Master Disconnects

John - WB5NFC <wb5nfc@...>
 

I believe you're right on target, as usual! Time permitting,  educate me a little (or a LOT), please...

I didn't understand what I was seeing with the ps ax | grep MMDVM command.

root@WB5NFC-2186:/opt/MMDVM_Bridge#  ps ax | grep MMDVM
  668 ?        Ss     0:01 /opt/MMDVM_Bridge/MMDVM_Bridge /opt/MMDVM_Bridge/MMDVM_Bridge.ini
 1265 pts/0    S+     0:00 grep MMDVM

So I ran systemctl status mmdvm_bridge

● mmdvm_bridge.service - MMDVM_Bridge Service
   Loaded: loaded (/lib/systemd/system/mmdvm_bridge.service; enabled; vendor preset: enabled
   Active: active (running) since Wed 2019-07-24 13:51:14 CDT; 34min ago
 Main PID: 661 (MMDVM_Bridge)
   CGroup: /system.slice/mmdvm_bridge.service
           └─661 /opt/MMDVM_Bridge/MMDVM_Bridge /opt/MMDVM_Bridge/MMDVM_Bridge.ini

Which I think... tells me, yes dummy, it's already running and there's your problem.  How I started it at boot and now how I keep it from starting at every boot (while testing) are questions I can't answer.....


Re: #hblink #hblink

Aaron Groover
 

I’ve heard nothing out of BM about the link. So if BM approves it I won’t do TGIF




Respectfully,

Aaron Groover
(610) 379-6148
K3ALG@...


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Corey Dean N3FE <n3fe@...>
Sent: Wednesday, July 24, 2019 3:16:55 PM
To: main@dvswitch.groups.io <main@dvswitch.groups.io>
Subject: Re: [DVSwitch] #hblink
 
I really hope this isn’t the ysf reflector link you submitted to the bm support team!  We do not and will not crosslink to TGIF from BM.

Corey n3fe

On Wed, Jul 24, 2019 at 2:43 PM <k3alg@...> wrote:
So new to this whole hblink thing. However i Have a YSF Reflector that i want to bridge to TGIF. Can someone please tell me the command prompts and how to set it up? Thanks!


Re: #hblink #hblink

Corey Dean N3FE <n3fe@...>
 

I really hope this isn’t the ysf reflector link you submitted to the bm support team!  We do not and will not crosslink to TGIF from BM.

Corey n3fe

On Wed, Jul 24, 2019 at 2:43 PM <k3alg@...> wrote:
So new to this whole hblink thing. However i Have a YSF Reflector that i want to bridge to TGIF. Can someone please tell me the command prompts and how to set it up? Thanks!


Re: #hblink #hblink

Steve N4IRS
 

Aaron,
YSF2DMR is not part of the DVSwitch family. You should go here: <https://github.com/juribeparada/MMDVM_CM>

73, Steve N4IRS

On 7/24/2019 2:53 PM, Aaron Groover wrote:
Sorry Alec lol Ill try to make it more not confusing. I already created the YSF reflector its already up and running "PA 6 County" so now i want to bridge it with a TGIF TG with YSF2DMR. However i do not know the command prompts how to get it started. So if you know them step by step that would be great

Aaron


#hblink #hblink

Aaron Groover
 

Sorry Alec lol Ill try to make it more not confusing. I already created the YSF reflector its already up and running "PA 6 County" so now i want to bridge it with a TGIF TG with YSF2DMR. However i do not know the command prompts how to get it started. So if you know them step by step that would be great

Aaron


Re: #hblink #hblink

Aaron Groover
 

The reflector is up on YSF I want to bridge it to TGIF




Respectfully,

Aaron Groover
(610) 379-6148
K3ALG@...


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Alec-N1AJW <alec.wasserman@...>
Sent: Wednesday, July 24, 2019 2:46:47 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] #hblink
 
https://register.ysfreflector.de/installation


make sure not to bridge it to 31665.  outside bridges arent allowed per Robert.

Alec
N1AJW


Re: #hblink #hblink

Alec-N1AJW
 

https://register.ysfreflector.de/installation


make sure not to bridge it to 31665.  outside bridges arent allowed per Robert.

Alec
N1AJW


Re: DMR Master Disconnects

Steve N4IRS
 

John,
Thanks for that. I don't see any issue. Thinking about your description, if you are running MMDVM_Bridge in the foreground, are you sure it's not ALSO running in background?
Before you start MB in the foreground:
ps ax | grep MMDVM

Steve

On 7/24/2019 1:47 PM, John - WB5NFC wrote:
[DMR Network]
Enable=1
Address=3102.repeater.net
Port=62031
Jitter=360
Local=62032
Password=passw0rd
Slot1=1
Slot2=1
Debug=0

[DMR]
Enable=1
ColorCode=1
EmbeddedLCOnly=1
DumpTAData=0

5701 - 5720 of 10184