Date   

Re: Help Needed Allstar Node running DVSwitch with DMR and Echolink Bridge Adding P25

Jeff Wood
 

Yes...

[DMR]
Enable=1
ColorCode=1
EmbeddedLCOnly=1
DumpTAData=0
 
[System Fusion]
Enable=0
 
[P25]
Enable=1
NAC=293
 
[NXDN]
Enable=0
RAN=1
Id=12345
 
[D-Star Network]
Enable=0
GatewayAddress=127.0.0.1
GatewayPort=20010
LocalPort=20011
Debug=0
 
[DMR Network]
Enable=1
Address=3108.repeater.net
Port=62031
Jitter=750
Local=62032
Password=passw0rd
Slot1=1
Slot2=1
Debug=0
 
[System Fusion Network]
Enable=0
LocalAddress=0
LocalPort=3200
GatewayAddress=ysfreflector.dvswitch.org
GatewayPort=42166
Debug=0
 
[P25 Network]
Enable=1
GatewayAddress=127.0.0.1
GatewayPort=42020
LocalPort=32010
Debug=0
 
[NXDN Network]
Enable=0
#LocalAddress=127.0.0.1
Debug=0
LocalPort=14021
GatewayAddress=127.0.0.1
GatewayPort=14020
 


Re: Help Needed Allstar Node running DVSwitch with DMR and Echolink Bridge Adding P25

Steve N4IRS
 

Look at the P25 MMDVM_Bridge.ini Do you have DMR enabled?

On 7/28/19 10:24 AM, jeff@... wrote:
That fixed one problem, P25 transmission to the reflector audio passes to DMR but not to Allstar? also I am now a looping connects and disconnects to the DMR master server..

M: 2019-07-28 14:17:18.059 P25, network end of transmission, 5.0 seconds, 0% packet loss
M: 2019-07-28 14:17:28.370 P25, received network transmission from N8EMA to TG 31391
M: 2019-07-28 14:17:28.695 DMR, TX state = ON
I: 2019-07-28 14:17:28.695 DMR, Begin TX: src=1139114 rpt=113949106 dst=1139491 slot=2 cc=1 metadata=
M: 2019-07-28 14:17:30.883 P25, network end of transmission, 2.9 seconds, 0% packet loss
M: 2019-07-28 14:17:31.242 DMR, TX state = OFF
E: 2019-07-28 14:18:03.949 DMR, Connection to the master has timed out, retrying connection
M: 2019-07-28 14:18:03.951 DMR, Closing DMR Network
M: 2019-07-28 14:18:03.951 DMR, Opening DMR Network
D: 2019-07-28 14:18:13.972 DMR, Sending authorisation
D: 2019-07-28 14:18:13.998 DMR, Sending configuration
M: 2019-07-28 14:18:14.039 DMR, Logged into the master successfully
M: 2019-07-28 14:18:18.143 DMR Slot 2, received network voice header from N8EMA to TG N8EMA
M: 2019-07-28 14:18:18.910 DMR Talker Alias (Data Format 1, Received 6/22 char): 'N8EMA '
M: 2019-07-28 14:18:19.630 DMR Talker Alias (Data Format 1, Received 13/22 char): 'N8EMA P25 All'
M: 2019-07-28 14:18:20.351 DMR Talker Alias (Data Format 1, Received 20/22 char): 'N8EMA P25 Allstar 49'
M: 2019-07-28 14:18:21.070 DMR Talker Alias (Data Format 1, Received 22/22 char): 'N8EMA P25 Allstar 4905'
M: 2019-07-28 14:18:22.629 DMR Slot 2, received network end of voice transmission, 4.4 seconds, 0% packet loss, BER: 0.0%
M: 2019-07-28 14:18:25.884 P25, received network transmission from N8EMA to TG 31391
M: 2019-07-28 14:18:26.224 DMR, TX state = ON
I: 2019-07-28 14:18:26.225 DMR, Begin TX: src=1139114 rpt=113949106 dst=1139491 slot=2 cc=1 metadata=
M: 2019-07-28 14:18:29.846 DMR, TX state = OFF
M: 2019-07-28 14:18:29.846 P25, network end of transmission, 4.3 seconds, 0% packet loss
W: 2019-07-28 14:19:14.062 DMR, Login to the master has failed, retrying login ...
M: 2019-07-28 14:19:50.021 P25, received network transmission from N8EMA to TG 31391
M: 2019-07-28 14:19:50.337 DMR, TX state = ON
I: 2019-07-28 14:19:50.337 DMR, Begin TX: src=1139114 rpt=113949106 dst=1139491 slot=2 cc=1 metadata=
M: 2019-07-28 14:19:52.524 P25, network end of transmission, 2.9 seconds, 0% packet loss
M: 2019-07-28 14:19:52.828 DMR, TX state = OFF
E: 2019-07-28 14:20:14.064 DMR, Connection to the master has timed out, retrying connection
M: 2019-07-28 14:20:14.065 DMR, Closing DMR Network
M: 2019-07-28 14:20:14.065 DMR, Opening DMR Network
D: 2019-07-28 14:20:24.090 DMR, Sending authorisation
D: 2019-07-28 14:20:24.116 DMR, Sending configuration
M: 2019-07-28 14:20:24.142 DMR, Logged into the master successfully
W: 2019-07-28 14:21:24.176 DMR, Login to the master has failed, retrying login ...
E: 2019-07-28 14:22:24.176 DMR, Connection to the master has timed out, retrying connection
M: 2019-07-28 14:22:24.177 DMR, Closing DMR Network
M: 2019-07-28 14:22:24.177 DMR, Opening DMR Network
 


Re: Help Needed Allstar Node running DVSwitch with DMR and Echolink Bridge Adding P25

Jeff Wood
 

That fixed one problem, P25 transmission to the reflector audio passes to DMR but not to Allstar? also I am now a looping connects and disconnects to the DMR master server..

M: 2019-07-28 14:17:18.059 P25, network end of transmission, 5.0 seconds, 0% packet loss
M: 2019-07-28 14:17:28.370 P25, received network transmission from N8EMA to TG 31391
M: 2019-07-28 14:17:28.695 DMR, TX state = ON
I: 2019-07-28 14:17:28.695 DMR, Begin TX: src=1139114 rpt=113949106 dst=1139491 slot=2 cc=1 metadata=
M: 2019-07-28 14:17:30.883 P25, network end of transmission, 2.9 seconds, 0% packet loss
M: 2019-07-28 14:17:31.242 DMR, TX state = OFF
E: 2019-07-28 14:18:03.949 DMR, Connection to the master has timed out, retrying connection
M: 2019-07-28 14:18:03.951 DMR, Closing DMR Network
M: 2019-07-28 14:18:03.951 DMR, Opening DMR Network
D: 2019-07-28 14:18:13.972 DMR, Sending authorisation
D: 2019-07-28 14:18:13.998 DMR, Sending configuration
M: 2019-07-28 14:18:14.039 DMR, Logged into the master successfully
M: 2019-07-28 14:18:18.143 DMR Slot 2, received network voice header from N8EMA to TG N8EMA
M: 2019-07-28 14:18:18.910 DMR Talker Alias (Data Format 1, Received 6/22 char): 'N8EMA '
M: 2019-07-28 14:18:19.630 DMR Talker Alias (Data Format 1, Received 13/22 char): 'N8EMA P25 All'
M: 2019-07-28 14:18:20.351 DMR Talker Alias (Data Format 1, Received 20/22 char): 'N8EMA P25 Allstar 49'
M: 2019-07-28 14:18:21.070 DMR Talker Alias (Data Format 1, Received 22/22 char): 'N8EMA P25 Allstar 4905'
M: 2019-07-28 14:18:22.629 DMR Slot 2, received network end of voice transmission, 4.4 seconds, 0% packet loss, BER: 0.0%
M: 2019-07-28 14:18:25.884 P25, received network transmission from N8EMA to TG 31391
M: 2019-07-28 14:18:26.224 DMR, TX state = ON
I: 2019-07-28 14:18:26.225 DMR, Begin TX: src=1139114 rpt=113949106 dst=1139491 slot=2 cc=1 metadata=
M: 2019-07-28 14:18:29.846 DMR, TX state = OFF
M: 2019-07-28 14:18:29.846 P25, network end of transmission, 4.3 seconds, 0% packet loss
W: 2019-07-28 14:19:14.062 DMR, Login to the master has failed, retrying login ...
M: 2019-07-28 14:19:50.021 P25, received network transmission from N8EMA to TG 31391
M: 2019-07-28 14:19:50.337 DMR, TX state = ON
I: 2019-07-28 14:19:50.337 DMR, Begin TX: src=1139114 rpt=113949106 dst=1139491 slot=2 cc=1 metadata=
M: 2019-07-28 14:19:52.524 P25, network end of transmission, 2.9 seconds, 0% packet loss
M: 2019-07-28 14:19:52.828 DMR, TX state = OFF
E: 2019-07-28 14:20:14.064 DMR, Connection to the master has timed out, retrying connection
M: 2019-07-28 14:20:14.065 DMR, Closing DMR Network
M: 2019-07-28 14:20:14.065 DMR, Opening DMR Network
D: 2019-07-28 14:20:24.090 DMR, Sending authorisation
D: 2019-07-28 14:20:24.116 DMR, Sending configuration
M: 2019-07-28 14:20:24.142 DMR, Logged into the master successfully
W: 2019-07-28 14:21:24.176 DMR, Login to the master has failed, retrying login ...
E: 2019-07-28 14:22:24.176 DMR, Connection to the master has timed out, retrying connection
M: 2019-07-28 14:22:24.177 DMR, Closing DMR Network
M: 2019-07-28 14:22:24.177 DMR, Opening DMR Network
 


Re: Help Needed Allstar Node running DVSwitch with DMR and Echolink Bridge Adding P25

Steve N4IRS
 

Yes,
You have both AB and MB listening on 34103

On 7/28/19 10:09 AM, jeff@... wrote:
root@DMR_Bridge:/opt/MMDVM_Bridge# ps ax | grep MMDVM_Bridge
  475 ?        Ssl    0:09 /opt/MMDVM_Bridge/MMDVM_Bridge /opt/MMDVM_Bridge/MMDVM_Bridge.ini
 1007 pts/4    S+     0:00 grep MMDVM_Bridge

/opt/MMDVM_Bridge/MMDVM_Bridge.ini should be the Allstar-DMR side, the P25 should be running out of /etc/ ??

UDP ports, in which ini ? Analog_Bridge ?

This information is from the /etc/Analog_Bridge_P25.ini file

; Information for xx_Bridge (Where xx is MMDVM, Quantar, HB, IPSC)
[AMBE_AUDIO]
address = 127.0.0.1                     ; IP address of xx_Bridge
txPort = 34100                          ; Transmit TLV frames to partner on this port
rxPort = 34103                          ; Listen for TLV frames from partner on this port
ambeMode = P25                          ; DMR, DMR_IPSC, DSTAR, NXDN, P25, YSFN, YSFW (encode PCM to this format)
minTxTimeMS = 2500                      ; Minimum time in MS for hang delay (0-10000)
 
Flipped??
 


Re: Help Needed Allstar Node running DVSwitch with DMR and Echolink Bridge Adding P25

Jeff Wood
 

root@DMR_Bridge:/opt/MMDVM_Bridge# ps ax | grep MMDVM_Bridge
  475 ?        Ssl    0:09 /opt/MMDVM_Bridge/MMDVM_Bridge /opt/MMDVM_Bridge/MMDVM_Bridge.ini
 1007 pts/4    S+     0:00 grep MMDVM_Bridge

/opt/MMDVM_Bridge/MMDVM_Bridge.ini should be the Allstar-DMR side, the P25 should be running out of /etc/ ??

UDP ports, in which ini ? Analog_Bridge ?

This information is from the /etc/Analog_Bridge_P25.ini file

; Information for xx_Bridge (Where xx is MMDVM, Quantar, HB, IPSC)
[AMBE_AUDIO]
address = 127.0.0.1                     ; IP address of xx_Bridge
txPort = 34100                          ; Transmit TLV frames to partner on this port
rxPort = 34103                          ; Listen for TLV frames from partner on this port
ambeMode = P25                          ; DMR, DMR_IPSC, DSTAR, NXDN, P25, YSFN, YSFW (encode PCM to this format)
minTxTimeMS = 2500                      ; Minimum time in MS for hang delay (0-10000)
 
Flipped??
 


Re: Help Needed Allstar Node running DVSwitch with DMR and Echolink Bridge Adding P25

Steve N4IRS
 

UDP ports flipped?

On 7/28/19 9:54 AM, jeff@... wrote:
Thanks Steve,

  It is showing the Analog_Bridge..

Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name
udp        0      0 0.0.0.0:34103           0.0.0.0:*                           600/./Analog_Bridge
udp        0      0 0.0.0.0:46458           0.0.0.0:*                           476/Analog_Bridge
udp        0      0 0.0.0.0:31100           0.0.0.0:*                           476/Analog_Bridge
udp        0      0 0.0.0.0:31103           0.0.0.0:*                           475/MMDVM_Bridge
udp        0      0 0.0.0.0:2470            0.0.0.0:*                           474/qemu-arm-static
udp        0      0 0.0.0.0:48065           0.0.0.0:*                           476/Analog_Bridge
udp        0      0 0.0.0.0:4569            0.0.0.0:*                           421/asterisk
udp        0      0 0.0.0.0:54294           0.0.0.0:*                           475/MMDVM_Bridge
udp        0      0 0.0.0.0:42010           0.0.0.0:*                           548/./P25Gateway
udp        0      0 0.0.0.0:42020           0.0.0.0:*                           548/./P25Gateway
udp        0      0 0.0.0.0:41000           0.0.0.0:*                           520/./P25Reflector
udp        0      0 0.0.0.0:41000           0.0.0.0:*                           519/./P25Reflector
udp        0      0 0.0.0.0:68              0.0.0.0:*                           401/dhclient
udp        0      0 0.0.0.0:5198            0.0.0.0:*                           421/asterisk
udp        0      0 0.0.0.0:5199            0.0.0.0:*                           421/asterisk
udp        0      0 0.0.0.0:62032           0.0.0.0:*                           475/MMDVM_Bridge
udp        0      0 0.0.0.0:47781           0.0.0.0:*                           476/Analog_Bridge
udp        0      0 0.0.0.0:34001           0.0.0.0:*                           476/Analog_Bridge
udp        0      0 127.0.0.1:32001         0.0.0.0:*                           421/asterisk
 


Re: Help Needed Allstar Node running DVSwitch with DMR and Echolink Bridge Adding P25

Steve N4IRS
 

Also, You may already have MMDVM_Bridge running.
ps ax | grep MMDVM_Bridge

On 7/28/19 9:48 AM, jeff@... wrote:
I have a running Allstar Node using DVSwitch with DMR and Echolink Bridge, i am in the
process of adding a P25 Reflector, I am following the Blog.927.org instructions and help files...
I seem to have it all up and running with no error except for the last step...when i run 

cd /opt/MMDVM_Bridge
./MMDVM_Bridge /etc/MMDVM_Bridge.ini &

it all loads and looks good until the end, this is the error I am receiving.

M: 2019-07-28 13:37:50.289 DMR, Opening DMR Network
I: 2019-07-28 13:37:50.290 P25 Network Parameters
I: 2019-07-28 13:37:50.290     Gateway Address: 127.0.0.1
I: 2019-07-28 13:37:50.290     Gateway Port: 42020
I: 2019-07-28 13:37:50.290     Local Port: 32010
I: 2019-07-28 13:37:50.290     Mode Hang: 3s
M: 2019-07-28 13:37:50.291 P25, Opening INI file: DVSwitch.ini
M: 2019-07-28 13:37:50.291 P25, Setting [P25] Address -> 127.0.0.1
M: 2019-07-28 13:37:50.291 P25, Setting [P25] TXPort -> 34100
M: 2019-07-28 13:37:50.291 P25, Setting [P25] RXPort -> 34103
M: 2019-07-28 13:37:50.291 P25, Setting [P25] Slot -> 2
E: 2019-07-28 13:37:50.291 Cannot bind the UDP address, err: 98
F: 2019-07-28 13:37:50.292 P25, Can not open listener port 34103

any ideas??



Re: Help Needed Allstar Node running DVSwitch with DMR and Echolink Bridge Adding P25

Jeff Wood
 

Thanks Steve,

  It is showing the Analog_Bridge..

Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name
udp        0      0 0.0.0.0:34103           0.0.0.0:*                           600/./Analog_Bridge
udp        0      0 0.0.0.0:46458           0.0.0.0:*                           476/Analog_Bridge
udp        0      0 0.0.0.0:31100           0.0.0.0:*                           476/Analog_Bridge
udp        0      0 0.0.0.0:31103           0.0.0.0:*                           475/MMDVM_Bridge
udp        0      0 0.0.0.0:2470            0.0.0.0:*                           474/qemu-arm-static
udp        0      0 0.0.0.0:48065           0.0.0.0:*                           476/Analog_Bridge
udp        0      0 0.0.0.0:4569            0.0.0.0:*                           421/asterisk
udp        0      0 0.0.0.0:54294           0.0.0.0:*                           475/MMDVM_Bridge
udp        0      0 0.0.0.0:42010           0.0.0.0:*                           548/./P25Gateway
udp        0      0 0.0.0.0:42020           0.0.0.0:*                           548/./P25Gateway
udp        0      0 0.0.0.0:41000           0.0.0.0:*                           520/./P25Reflector
udp        0      0 0.0.0.0:41000           0.0.0.0:*                           519/./P25Reflector
udp        0      0 0.0.0.0:68              0.0.0.0:*                           401/dhclient
udp        0      0 0.0.0.0:5198            0.0.0.0:*                           421/asterisk
udp        0      0 0.0.0.0:5199            0.0.0.0:*                           421/asterisk
udp        0      0 0.0.0.0:62032           0.0.0.0:*                           475/MMDVM_Bridge
udp        0      0 0.0.0.0:47781           0.0.0.0:*                           476/Analog_Bridge
udp        0      0 0.0.0.0:34001           0.0.0.0:*                           476/Analog_Bridge
udp        0      0 127.0.0.1:32001         0.0.0.0:*                           421/asterisk
 


Re: Help Needed Allstar Node running DVSwitch with DMR and Echolink Bridge Adding P25

Steve N4IRS
 

I would say, you already have something else listening on 34103. To check:
As root
netstat -unap

Steve N4IRS

On 7/28/19 9:48 AM, jeff@... wrote:
I have a running Allstar Node using DVSwitch with DMR and Echolink Bridge, i am in the
process of adding a P25 Reflector, I am following the Blog.927.org instructions and help files...
I seem to have it all up and running with no error except for the last step...when i run 

cd /opt/MMDVM_Bridge
./MMDVM_Bridge /etc/MMDVM_Bridge.ini &

it all loads and looks good until the end, this is the error I am receiving.

M: 2019-07-28 13:37:50.289 DMR, Opening DMR Network
I: 2019-07-28 13:37:50.290 P25 Network Parameters
I: 2019-07-28 13:37:50.290     Gateway Address: 127.0.0.1
I: 2019-07-28 13:37:50.290     Gateway Port: 42020
I: 2019-07-28 13:37:50.290     Local Port: 32010
I: 2019-07-28 13:37:50.290     Mode Hang: 3s
M: 2019-07-28 13:37:50.291 P25, Opening INI file: DVSwitch.ini
M: 2019-07-28 13:37:50.291 P25, Setting [P25] Address -> 127.0.0.1
M: 2019-07-28 13:37:50.291 P25, Setting [P25] TXPort -> 34100
M: 2019-07-28 13:37:50.291 P25, Setting [P25] RXPort -> 34103
M: 2019-07-28 13:37:50.291 P25, Setting [P25] Slot -> 2
E: 2019-07-28 13:37:50.291 Cannot bind the UDP address, err: 98
F: 2019-07-28 13:37:50.292 P25, Can not open listener port 34103

any ideas??



Help Needed Allstar Node running DVSwitch with DMR and Echolink Bridge Adding P25

Jeff Wood
 

I have a running Allstar Node using DVSwitch with DMR and Echolink Bridge, i am in the
process of adding a P25 Reflector, I am following the Blog.927.org instructions and help files...
I seem to have it all up and running with no error except for the last step...when i run 

cd /opt/MMDVM_Bridge
./MMDVM_Bridge /etc/MMDVM_Bridge.ini &

it all loads and looks good until the end, this is the error I am receiving.

M: 2019-07-28 13:37:50.289 DMR, Opening DMR Network
I: 2019-07-28 13:37:50.290 P25 Network Parameters
I: 2019-07-28 13:37:50.290     Gateway Address: 127.0.0.1
I: 2019-07-28 13:37:50.290     Gateway Port: 42020
I: 2019-07-28 13:37:50.290     Local Port: 32010
I: 2019-07-28 13:37:50.290     Mode Hang: 3s
M: 2019-07-28 13:37:50.291 P25, Opening INI file: DVSwitch.ini
M: 2019-07-28 13:37:50.291 P25, Setting [P25] Address -> 127.0.0.1
M: 2019-07-28 13:37:50.291 P25, Setting [P25] TXPort -> 34100
M: 2019-07-28 13:37:50.291 P25, Setting [P25] RXPort -> 34103
M: 2019-07-28 13:37:50.291 P25, Setting [P25] Slot -> 2
E: 2019-07-28 13:37:50.291 Cannot bind the UDP address, err: 98
F: 2019-07-28 13:37:50.292 P25, Can not open listener port 34103

any ideas??


Re: HBmonitor sometimes breaks

SP2ONG Waldek
 

I forgot to add what message is displayed when appearing this problem:


Reason: [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionDone'>: Connection was closed cleanly.


HBmonitor sometimes breaks

SP2ONG Waldek
 

Hi,

I will share with one solution which I have investigated with one HBmonitor which have a lot of defined rules. After a short time, HBmonitor is broken working. I have found that default value  NetstringReceiver in the twisted.protocols python is to short when we have many rules.
We need put in web_tables.py

NetstringReceiver.MAX_LENGTH = 500000
 
before code:

OPCODE
= {.....
# Opcodes for reporting protocol to HBlink
The value of NetstringReceiver.MAX_LENGTH  your are need test to find when HBmointor will be work without broken

73 Waldek


Re: Callsigns Change When Going Across Bridge

Steve N4IRS
 

Actually the DMR ID is used if available. We are checking if there is a call sign without a DMR ID, what does and what should happen.

Steve N4IRS

On 7/26/19 6:42 PM, Adrian Fewster wrote:

Ok, on that, I am probably thinking of the CA6JAU method of using a DMR database file for callsign lookup and number transfer from one system to another, I guess this is different.

YSFReflector

On 27/7/19 8:33 am, David wrote:

Thanks Adrian, but this is a YSF-only setup.  No DMR is being used at all.

 

AK2L

 

 

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> On Behalf Of Adrian Fewster
Sent: Friday, July 26, 2019 14:59
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] Callsigns Change When Going Across Bridge

 

Check the system DMR database file to see if it has that Id ? If not & added, then it should report to dashboard correctly.

On 27/7/19 5:01 am, David wrote:

Here are the corresponding log entries from the destination reflector:

M: 2019-07-26 00:05:27.781 Received data from ?????????? to ?????????? at BRIDGE   
M: 2019-07-26 00:05:27.781 Received end of transmission

M: 2019-07-26 01:22:33.760 Received data from      W5ZIT to        ALL at BRIDGE   
M: 2019-07-26 01:22:34.547 Received end of transmission

M: 2019-07-26 10:25:50.470 Received data from      KF4LL to        ALL at BRIDGE   
M: 2019-07-26 10:25:51.271 Received end of transmission

AK2L



Re: Callsigns Change When Going Across Bridge

Adrian Fewster <vk4tux@...>
 

Ok, on that, I am probably thinking of the CA6JAU method of using a DMR database file for callsign lookup and number transfer from one system to another, I guess this is different.

YSFReflector

On 27/7/19 8:33 am, David wrote:

Thanks Adrian, but this is a YSF-only setup.  No DMR is being used at all.

 

AK2L

 

 

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> On Behalf Of Adrian Fewster
Sent: Friday, July 26, 2019 14:59
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] Callsigns Change When Going Across Bridge

 

Check the system DMR database file to see if it has that Id ? If not & added, then it should report to dashboard correctly.

On 27/7/19 5:01 am, David wrote:

Here are the corresponding log entries from the destination reflector:

M: 2019-07-26 00:05:27.781 Received data from ?????????? to ?????????? at BRIDGE   
M: 2019-07-26 00:05:27.781 Received end of transmission

M: 2019-07-26 01:22:33.760 Received data from      W5ZIT to        ALL at BRIDGE   
M: 2019-07-26 01:22:34.547 Received end of transmission

M: 2019-07-26 10:25:50.470 Received data from      KF4LL to        ALL at BRIDGE   
M: 2019-07-26 10:25:51.271 Received end of transmission

AK2L


Re: Callsigns Change When Going Across Bridge

David - AK2L
 

Thanks Adrian, but this is a YSF-only setup.  No DMR is being used at all.

 

AK2L

 

 

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> On Behalf Of Adrian Fewster
Sent: Friday, July 26, 2019 14:59
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] Callsigns Change When Going Across Bridge

 

Check the system DMR database file to see if it has that Id ? If not & added, then it should report to dashboard correctly.

On 27/7/19 5:01 am, David wrote:

Here are the corresponding log entries from the destination reflector:

M: 2019-07-26 00:05:27.781 Received data from ?????????? to ?????????? at BRIDGE   
M: 2019-07-26 00:05:27.781 Received end of transmission

M: 2019-07-26 01:22:33.760 Received data from      W5ZIT to        ALL at BRIDGE   
M: 2019-07-26 01:22:34.547 Received end of transmission

M: 2019-07-26 10:25:50.470 Received data from      KF4LL to        ALL at BRIDGE   
M: 2019-07-26 10:25:51.271 Received end of transmission

AK2L


Re: Callsigns Change When Going Across Bridge

Adrian Fewster <vk4tux@...>
 

Check the system DMR database file to see if it has that Id ? If not & added, then it should report to dashboard correctly.

On 27/7/19 5:01 am, David wrote:
Here are the corresponding log entries from the destination reflector:

M: 2019-07-26 00:05:27.781 Received data from ?????????? to ?????????? at BRIDGE   
M: 2019-07-26 00:05:27.781 Received end of transmission

M: 2019-07-26 01:22:33.760 Received data from      W5ZIT to        ALL at BRIDGE   
M: 2019-07-26 01:22:34.547 Received end of transmission

M: 2019-07-26 10:25:50.470 Received data from      KF4LL to        ALL at BRIDGE   
M: 2019-07-26 10:25:51.271 Received end of transmission

AK2L



Re: Export from online server to SD card

Steve N4IRS
 

Aaron,
As the name implies, this group was created to discuss the family of DVSwitch (and it's close cousins DMRlink and HBlink) programs. There is some cross over since DVSwitch connects to some of the MMDVM software and XLX software. Since Analog_Bridge can connect to ASL, support for ASL <-> AB is supported.

73, Steve N4IRS

On 7/26/19 4:26 PM, Aaron Groover wrote:
No.... your not reading anything wrong. I was simply asking a simple question about how to do it. “the product” is also configured with HBLink. Which, if I am reading into this wrong, is part of the group.

That’s correct it is his software. However this is a Linux based group isn’t it?

Aaron K3ALG





Respectfully,

Aaron Groover
(610) 379-6148

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Corey Dean N3FE <n3fe@...>
Sent: Friday, July 26, 2019 4:01:38 PM
To: main@dvswitch.groups.io <main@dvswitch.groups.io>
Subject: Re: [DVSwitch] Export from online server to SD card
 
Why not just install it on your PI and copy the configs over?  It really should be that easy.  I thought the YSF Reflector was G4KLX piece of software, Not a dvswitch product.  Am I reading into this wrong?

Corey  N3FE

On Fri, Jul 26, 2019 at 3:57 PM Aaron Groover <k3alg@...> wrote:
Basically built a YSF on the Ubuntu server and I want to remove it from the “online” server and put it on a pi and run it off my static IP at my house




Respectfully,

Aaron Groover
(610) 379-6148

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Friday, July 26, 2019 2:44:16 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] Export from online server to SD card
 

What is it you are trying to export?

 

From: Aaron Groover
Sent: Friday, July 26, 2019 2:32 PM
To: main@DVSwitch.groups.io
Subject: [DVSwitch] Export from online server to SD card

 

Is there a way to export from an online server of ubuntu and flash it to my SD card and run it off the pi3? 

So export and flash

 



Re: Export from online server to SD card

Aaron Groover
 

No.... your not reading anything wrong. I was simply asking a simple question about how to do it. “the product” is also configured with HBLink. Which, if I am reading into this wrong, is part of the group.

That’s correct it is his software. However this is a Linux based group isn’t it?

Aaron K3ALG





Respectfully,

Aaron Groover
(610) 379-6148
K3ALG@...


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Corey Dean N3FE <n3fe@...>
Sent: Friday, July 26, 2019 4:01:38 PM
To: main@dvswitch.groups.io <main@dvswitch.groups.io>
Subject: Re: [DVSwitch] Export from online server to SD card
 
Why not just install it on your PI and copy the configs over?  It really should be that easy.  I thought the YSF Reflector was G4KLX piece of software, Not a dvswitch product.  Am I reading into this wrong?

Corey  N3FE

On Fri, Jul 26, 2019 at 3:57 PM Aaron Groover <k3alg@...> wrote:
Basically built a YSF on the Ubuntu server and I want to remove it from the “online” server and put it on a pi and run it off my static IP at my house




Respectfully,

Aaron Groover
(610) 379-6148

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Friday, July 26, 2019 2:44:16 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] Export from online server to SD card
 

What is it you are trying to export?

 

From: Aaron Groover
Sent: Friday, July 26, 2019 2:32 PM
To: main@DVSwitch.groups.io
Subject: [DVSwitch] Export from online server to SD card

 

Is there a way to export from an online server of ubuntu and flash it to my SD card and run it off the pi3? 

So export and flash

 


Re: Export from online server to SD card

Corey Dean N3FE <n3fe@...>
 

Why not just install it on your PI and copy the configs over?  It really should be that easy.  I thought the YSF Reflector was G4KLX piece of software, Not a dvswitch product.  Am I reading into this wrong?

Corey  N3FE


On Fri, Jul 26, 2019 at 3:57 PM Aaron Groover <k3alg@...> wrote:
Basically built a YSF on the Ubuntu server and I want to remove it from the “online” server and put it on a pi and run it off my static IP at my house




Respectfully,

Aaron Groover
(610) 379-6148

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Friday, July 26, 2019 2:44:16 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] Export from online server to SD card
 

What is it you are trying to export?

 

From: Aaron Groover
Sent: Friday, July 26, 2019 2:32 PM
To: main@DVSwitch.groups.io
Subject: [DVSwitch] Export from online server to SD card

 

Is there a way to export from an online server of ubuntu and flash it to my SD card and run it off the pi3? 

So export and flash

 


Re: Export from online server to SD card

Aaron Groover
 

Basically built a YSF on the Ubuntu server and I want to remove it from the “online” server and put it on a pi and run it off my static IP at my house




Respectfully,

Aaron Groover
(610) 379-6148
K3ALG@...


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Friday, July 26, 2019 2:44:16 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] Export from online server to SD card
 

What is it you are trying to export?

 

From: Aaron Groover
Sent: Friday, July 26, 2019 2:32 PM
To: main@DVSwitch.groups.io
Subject: [DVSwitch] Export from online server to SD card

 

Is there a way to export from an online server of ubuntu and flash it to my SD card and run it off the pi3? 

So export and flash

 

5301 - 5320 of 9820