Date   

NOOB Setup-Configuration Help #analog_bridge #dmrlink

Chris K7AZ
 

Seeking assistance setting up an ASL to DMR interface.  Platform is a private VM server.   I have an ASL node set up 29837 and I'm about 70% into the DMR transcoder part when things started to not cooperate.  TeamViewer available.
Evenings 6-8 PM CA time is best for me.    

Thank you,
Chris K7AZ 


Re: Help Needed Allstar Node running DVSwitch with DMR and Echolink Bridge Adding P25

Jeff Wood
 

Thanks again Steve, 

  I have been looking around the files and did find the P25 side and and ASL were using the same ports (I flipped) the P25 ports 
[USRP]
address = 127.0.0.1                   
txPort = 34001                          
rxPort = 32001                          

Now I have P25 Transmissions from P25 to ASL and DMR, but still nothing from ASL or DMR back to P25...
I am sure its a port still looking....


HBmonitor and XLXPEERS support

Dan K2IE
 

It is a beauty.  My XLXPEER now displays as expected.

 

Thanks!

 

From: main@DVSwitch.groups.io [mailto:main@DVSwitch.groups.io] On Behalf Of Steve KC1AWV
Sent: Sunday, July 28, 2019 18:37
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] HBmonitor and XLXPEERS support

 

New PR on github to fix a typo I overlooked on line 213. Also removed a \t at the end of the same line.

Also, porting from python 2 to 3 is breaking. Twisted gives a 500 response, Request did not return bytes, and "Bad request" when trying to view the page. Still working on these issues.

Steve KC1AWV


Re: HBmonitor and XLXPEERS support

Cort N0MJS <n0mjs@...>
 

Bytes objects were the biggest issue porting untils and HBlink. They’re frustrating.


On Jul 28, 2019, at 5:36 PM, Steve KC1AWV <smiller@...> wrote:

New PR on github to fix a typo I overlooked on line 213. Also removed a \t at the end of the same line.

Also, porting from python 2 to 3 is breaking. Twisted gives a 500 response, Request did not return bytes, and "Bad request" when trying to view the page. Still working on these issues.

Steve KC1AWV


Re: HBmonitor and XLXPEERS support

Joe Hussey
 



On Sun, Jul 28, 2019 at 6:37 PM Steve KC1AWV <smiller@...> wrote:
New PR on github to fix a typo I overlooked on line 213. Also removed a \t at the end of the same line.

Also, porting from python 2 to 3 is breaking. Twisted gives a 500 response, Request did not return bytes, and "Bad request" when trying to view the page. Still working on these issues.

Steve KC1AWV


Re: HBmonitor and XLXPEERS support

Steve KC1AWV
 

New PR on github to fix a typo I overlooked on line 213. Also removed a \t at the end of the same line.

Also, porting from python 2 to 3 is breaking. Twisted gives a 500 response, Request did not return bytes, and "Bad request" when trying to view the page. Still working on these issues.

Steve KC1AWV


Re: Help Needed Allstar Node running DVSwitch with DMR and Echolink Bridge Adding P25

Steve N4IRS
 

Jeff,
I assume you are feeding 2 ASL nodes, one for DMR and one for P25.
I assume you are running these 2 nodes on a single ASL server.
I assume you have the 2 nodes in your rpt.conf. Each have a entry for USRP as: rxchannel = USRP/127.0.0.1:34001:32001
If you look at the [USRP] stanza for each mode, you will see you are using the same UDP ports.

Steve N4IRS




On 7/28/19 12:58 PM, jeff@... wrote:
I would guess some ini files...



                       


Re: NXDN Dashboard

Jeff - WA3PNY
 

Hi Michael,

I don’t have the file but:
If you go to the dashboard web directory, you should see a directory: config - inside is config.php, edit that file with the same information that setup asks for.  

Worked for me.

Jeff

Jeffrey V. Bauer
6381 Mulberry Ln.
Macungie, PA 18062
WA3PNY
CCS-7 3142263
NXDN 504
Wires-X 18394/28394

On Jul 28, 2019, at 3:17 PM, Michael KD5DFB <mhebert1975@...> wrote:

I downloaded the NXDN Dashboard from https://github.com/N4IRS/MMDVM-Install/tree/master/NXDN/NXDNReflector-Dashboard.

When I try to set it up, the setup.php is missing. Anyone have the setup.php?


Re: NXDN Reflector

Jeff - WA3PNY
 

Hi Michael,

It is usually a directory permission error:

You might want to use:
ls -l
To see who owns the directory & permissions for the directory you are trying to write your log files.

I have routinely chown mmdvm:mmdvm filespec
and chmod 755 or something reasonable, and the error goes away. Hope this helps.

Jeff

Jeffrey V. Bauer
6381 Mulberry Ln.
Macungie, PA 18062
WA3PNY
CCS-7 3142263
NXDN 504
Wires-X 18394/28394

On Jul 28, 2019, at 3:14 PM, Michael KD5DFB <mhebert1975@...> wrote:

I am having problems trying to run NXDN Reflector. When I try to run it I keep getting the error "unable to open the log file"

In the ini file I have the following:

[Log]
# Logging levels, 0=No logging
DisplayLevel=1
FileLevel=0
FilePath= .
FileRoot=NXDNReflector

I can only get it to run with FileLevel=0
I have also changed Daemon=0


NXDN Dashboard

Michael KD5DFB
 

I downloaded the NXDN Dashboard from https://github.com/N4IRS/MMDVM-Install/tree/master/NXDN/NXDNReflector-Dashboard.

When I try to set it up, the setup.php is missing. Anyone have the setup.php?


NXDN Reflector

Michael KD5DFB
 

I am having problems trying to run NXDN Reflector. When I try to run it I keep getting the error "unable to open the log file"

In the ini file I have the following:

[Log]
# Logging levels, 0=No logging
DisplayLevel=1
FileLevel=0
FilePath= .
FileRoot=NXDNReflector

I can only get it to run with FileLevel=0
I have also changed Daemon=0


Re: Help Needed Allstar Node running DVSwitch with DMR and Echolink Bridge Adding P25

Jeff Wood
 
Edited

I would guess some ini files...

I have looked over these files, still not seeing where the issue is, P25 from the radio to the reflector shows on the screen as it is being received and it passes audio just normal to DMR ONLY not to Allstar.

DMR does not show on the screen that it is even being received on the P25 system side but does tx out to all-star and dmr but not P25....


Re: Help Needed Allstar Node running DVSwitch with DMR and Echolink Bridge Adding P25

Steve N4IRS
 

I wonder what you should post to troubleshoot.

On 7/28/19 12:51 PM, jeff@... wrote:
I do have it running on one instance of the MMDVM.ini, but still have the same issue
P25 to DMR works fine...nothing from DMR to P25


Re: Help Needed Allstar Node running DVSwitch with DMR and Echolink Bridge Adding P25

Jeff Wood
 

I do have it running on one instance of the MMDVM.ini, but still have the same issue
P25 to DMR works fine...nothing from DMR to P25


Re: Help Needed Allstar Node running DVSwitch with DMR and Echolink Bridge Adding P25

Steve N4IRS
 

If you think about it, you can do both DMR and P25 in one instance of MMDVM_Bridge.
Good to hear you have it running.

Steve N4IRS

On 7/28/19 11:30 AM, jeff@... wrote:
Thank You for your help Steve,  

I currently have P25 to DMR TX audio working perfect...

M: 2019-07-28 15:18:42.540 MMDVM_Bridge-20180423 is running
I: 2019-07-28 15:18:42.540 Started the DMR Id lookup reload thread
M: 2019-07-28 15:18:51.159 P25, received network transmission from N8EMA to TG 31391
M: 2019-07-28 15:18:53.154 P25, network end of transmission, 2.3 seconds, 0% packet loss
M: 2019-07-28 15:18:59.079 P25, received network transmission from N8EMA to TG 31391
M: 2019-07-28 15:19:01.958 P25, network end of transmission, 3.2 seconds, 0% packet loss
M: 2019-07-28 15:20:28.837 P25, received network transmission from N8EMA to TG 31391
M: 2019-07-28 15:20:31.724 P25, network end of transmission, 3.2 seconds, 0% packet loss
M: 2019-07-28 15:20:51.472 P25, received network transmission from N8EMA to TG 31391
M: 2019-07-28 15:20:55.053 P25, network end of transmission, 4.0 seconds, 0% packet loss
M: 2019-07-28 15:21:31.814 P25, received network transmission from N8EMA to TG 31391
M: 2019-07-28 15:21:34.147 P25, network end of transmission, 2.7 seconds, 0% packet loss
 
but nothing from the DMR to P25 side..Do i need to enable the P25 settings in the /opt/MMDVM_Bridge.ini ??


Re: Help Needed Allstar Node running DVSwitch with DMR and Echolink Bridge Adding P25

Jeff Wood
 

Thank You for your help Steve,  

I currently have P25 to DMR TX audio working perfect...

M: 2019-07-28 15:18:42.540 MMDVM_Bridge-20180423 is running
I: 2019-07-28 15:18:42.540 Started the DMR Id lookup reload thread
M: 2019-07-28 15:18:51.159 P25, received network transmission from N8EMA to TG 31391
M: 2019-07-28 15:18:53.154 P25, network end of transmission, 2.3 seconds, 0% packet loss
M: 2019-07-28 15:18:59.079 P25, received network transmission from N8EMA to TG 31391
M: 2019-07-28 15:19:01.958 P25, network end of transmission, 3.2 seconds, 0% packet loss
M: 2019-07-28 15:20:28.837 P25, received network transmission from N8EMA to TG 31391
M: 2019-07-28 15:20:31.724 P25, network end of transmission, 3.2 seconds, 0% packet loss
M: 2019-07-28 15:20:51.472 P25, received network transmission from N8EMA to TG 31391
M: 2019-07-28 15:20:55.053 P25, network end of transmission, 4.0 seconds, 0% packet loss
M: 2019-07-28 15:21:31.814 P25, received network transmission from N8EMA to TG 31391
M: 2019-07-28 15:21:34.147 P25, network end of transmission, 2.7 seconds, 0% packet loss
 
but nothing from the DMR to P25 side..Do i need to enable the P25 settings in the /opt/MMDVM_Bridge.ini ??


Re: Help Needed Allstar Node running DVSwitch with DMR and Echolink Bridge Adding P25

Steve N4IRS
 

You actually do not need to be running 2 copies of MB since it will do bothe modes at the same time but that is for later.

On 7/28/19 10:55 AM, jeff@... wrote:
I have two, one in /opt/MMDVM_Bridge/MMDVM_Bridge,ini used for Allstar-->DMR and vice versa

and the P25 MMDM_Bridge.ini located in /etc/MMDVM_Bridge.ini as instructed in the blog.927 information...


Re: Help Needed Allstar Node running DVSwitch with DMR and Echolink Bridge Adding P25

Steve N4IRS
 

You do not need DMR enabled in the P25 MMDVM_Bridge

On 7/28/19 10:55 AM, jeff@... wrote:
I have two, one in /opt/MMDVM_Bridge/MMDVM_Bridge,ini used for Allstar-->DMR and vice versa

and the P25 MMDM_Bridge.ini located in /etc/MMDVM_Bridge.ini as instructed in the blog.927 information...


Re: Help Needed Allstar Node running DVSwitch with DMR and Echolink Bridge Adding P25

Jeff Wood
 

I have two, one in /opt/MMDVM_Bridge/MMDVM_Bridge,ini used for Allstar-->DMR and vice versa

and the P25 MMDM_Bridge.ini located in /etc/MMDVM_Bridge.ini as instructed in the blog.927 information...


Re: Help Needed Allstar Node running DVSwitch with DMR and Echolink Bridge Adding P25

Steve N4IRS
 

How many copies of MMDVM_Bridge are you running?

On 7/28/19 10:46 AM, jeff@... wrote:
Yes...

[DMR]
Enable=1
ColorCode=1
EmbeddedLCOnly=1
DumpTAData=0
 
[System Fusion]
Enable=0
 
[P25]
Enable=1
NAC=293
 
[NXDN]
Enable=0
RAN=1
Id=12345
 
[D-Star Network]
Enable=0
GatewayAddress=127.0.0.1
GatewayPort=20010
LocalPort=20011
Debug=0
 
[DMR Network]
Enable=1
Address=3108.repeater.net
Port=62031
Jitter=750
Local=62032
Password=passw0rd
Slot1=1
Slot2=1
Debug=0
 
[System Fusion Network]
Enable=0
LocalAddress=0
LocalPort=3200
GatewayAddress=ysfreflector.dvswitch.org
GatewayPort=42166
Debug=0
 
[P25 Network]
Enable=1
GatewayAddress=127.0.0.1
GatewayPort=42020
LocalPort=32010
Debug=0
 
[NXDN Network]
Enable=0
#LocalAddress=127.0.0.1
Debug=0
LocalPort=14021
GatewayAddress=127.0.0.1
GatewayPort=14020
 

5281 - 5300 of 9820