Home Messages Hashtags Subgroups Wiki

Welcome to DVSwitch

DVSwitch is a set of tools and programs related to provisioning and operating Amateur Radio digital voice networks.

Purpose

The purpose of DVSwitch is as follows:

1) Allows “local” networking during an outage of the regional national/international network server.
2) Allows a local network operator to “blend” upstream feeds from different Networks (capital N on purpose). These Networks can’t get their act together and learn how to play nice with each other (everyone guilty as far as we are concerned). They may not like people doing this, but the solution is to grow up and work with each other, and not keep trying to force people to take sides.
3) Allows local segregation of localized traffic with more flexibility.
4) Allows experimentation with linking and how it’s done (part 97 specifies experimentation and advancement of the radio art are a core part of amateur radio).

Mission Statement/Position

Our stated position is:

WHEREAS the Networks continue to be largely islands and are not working together to create a unified network of Networks.
WHEREAS no firm reason has been given by any of the Networks why a *competent* local network operator cannot make this work effectively.

(US ONLY)
WHEREAS 47 CFR 97 (Amateur Radio Service) specifies that a core component of amateur radio is experimentation and advancement of the radio art [97.1(b)].

BE IT RESOLVED the core group of US amateur radio operators and experimenters organized around the DVSwitch project, and in the spirit of USA 47 CFR 97 and its intentions, support the *responsible* and *thoughtful* use of digital voice networking tools to create localized networks that will interconnect to the national/international Networks, and will support users of its tools in order to do this in the most effective and sustainable way possible.

Between

and

Re: NOOB Setup-Configuration Help #analog_bridge #dmrlink Chris K7AZ #4681 Hi Ernest, I tried the PW you suggested but only results in 100% failure. As for the IP address, 3103.repeater.net is the BM 3103 master server and pings every time. One thing of interest, since putting the PW back to passw0rd, I no longer get the reoccurring timeout error and retries... Maybe Murphy left the building? Sent from my Verizon, Samsung Galaxy smartphone toggle quoted messageShow quoted text -------- Original message -------- From: Ernest Pratt <erniepratt@...> Date: 7/30/19 22:43 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge Looks like you are trying to log into BM Dashboard. Put in the correct IP for whatever BM server you want to connect to. Also password should be passw1rd
More All Messages By This Member
Re: RF to RF bridge Steve N4IRS #4680 This could be done with out the internet on a single host. From waht I understand the Yaesu repeater is far enough away so that a low power hot spot will not make the distance. This does not require any internet connection. DMR User radio <-> Low power hotspot <-> MMDVMHost <-> HBlink <-> MMDVM_Bridge <-> YSFReflector <-> MMDVMHost <-> Hi power hotspot <-> Yaesu repeater As I said, all of this can be done on one host. It can also be split up amongst multiple hosts. If multiple hosts you can use Pi-Star the far ends. Steve N4IRS toggle quoted messageShow quoted text On 7/30/2019 3:24 PM, Neil k8it wrote: They just insulted a YSF wires x node called MICONNECT about one quarter mile away from me. Both my wife and I have DMR radios. When I tryed to use a hotspot the internet delays ranged from 5 to 8 seconds. This makes having a QSO convection almost impossible. Nobody waits that long between transmissions. You are lucky to get 5 seconds. What I want to do is to avoid the internet latency and create a RF to RF bridge. I know that these times were confirmed by others using hotspots. I also know that PiStar and the Openspot can crossmode. How can I do this without suffering the internet delays? The YSF repeater is least than a quarter mile away, and I want to have a local DMR connection in my hamshack. How do I do this? 73 Neil k8it On Jul 30, 2019, at 2:14 PM, Steve KC1AWV <smiller@...> wrote: If I am reading this right, I think what Neil is describing is a way for a DMR radio to talk with a Fusion radio, without needing to go to a reflector or other network. It's an interesting thought experiment, and here's what I think. Pi-Star to Pi-Star, probably not. Pi-Star is designed from the ground up to talk to existing networks, and from what I've seen there's no 'easy' way of making two Pi-Star hotspots talk to each other in that fashion. Even going from mode to mode on Pi-Star (say, DMR radio to a YSF reflector) uses the MMDVM_CM tools, if I recall correctly. Openspot has a hotspot-to-hotspot mode, but I believe it's limited to only passing same-mode traffic, like DMR to DMR. Having not done this myself, this is limited to speculation. If you've got two Pi-Star hotspots already, you could have both of them connect to a central 'server' locally, running something like HBlink3. Connect one as a DMR hotspot to the HBlink master and the other hotspot as a DMR2YSF hotspot to the HBlink master. Kind of like this: Pi-Star (DMR) <-> HBlink3 Master (Local) <-> Pi-Star (DMR2YSF) This kind of setup I would consider an 'advanced' configuration, but I think it could work. Going back on what Steve N4IRS said, where are you experiencing up to an 8 second delay on the Internet? Unless you're using dial-up or you're on the furthest reaches of a DSL line, I can't say I've seen latency that high in a long time. Steve KC1AWV
More All Messages By This Member
Re: NOOB Setup-Configuration Help #analog_bridge #dmrlink Ernie Gm7kbk #4679 Looks like you are trying to log into BM Dashboard. Put in the correct IP for whatever BM server you want to connect to. Also password should be passw1rd
More All Messages By This Member
Re: Connection To BrandMeister Timing/Dropping Out #mmdvm_bridge Chris K7AZ #4678 Should I start over from scratch? Sent from my Verizon, Samsung Galaxy smartphone toggle quoted messageShow quoted text -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/30/19 19:55 (GMT-08:00) To: main@dvswitch.groups.io Subject: Re: [DVSwitch] Connection To BrandMeister Timing/Dropping Out #mmdvm_bridge Yes top will show what is running. Then I have no idea why it is disconnecting. Sent via smoke signal (AT&T) From: main@... <main@DVSwitch.groups.io> on behalf of Chris K7AZ via Groups.Io <kilo7alphazulu@...> Sent: Tuesday, July 30, 2019 10:53:30 PM To: main@DVSwitch.groups.io <main@DVSwitch.groups.io> Subject: Re: [DVSwitch] Connection To BrandMeister Timing/Dropping Out #mmdvm_bridge Top shows one instance of MB running if that is the right place to look? Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/30/19 19:40 (GMT-08:00) To: main@dvswitch.groups.io Subject: Re: [DVSwitch] Connection To BrandMeister Timing/Dropping Out #mmdvm_bridge If I had to guess I would say you might have 2 instances of MB running. Sent via smoke signal (AT&T) From: main@... <main@DVSwitch.groups.io> on behalf of Chris K7AZ via Groups.Io <kilo7alphazulu@...> Sent: Tuesday, July 30, 2019 10:28:25 PM To: main@DVSwitch.groups.io <main@DVSwitch.groups.io> Subject: [DVSwitch] Connection To BrandMeister Timing/Dropping Out #mmdvm_bridge Sorry for the dumb question: Curious if getting reoccurring time/drop out messages on MMDVM_Bridge is normal? Seems to happen over a 2 minute period. W: 2019-07-31 02:20:49.689 DMR, Login to the master has failed, retrying login ... E: 2019-07-31 02:21:49.687 DMR, Connection to the master has timed out, retrying connection M: 2019-07-31 02:21:49.688 DMR, Closing DMR Network M: 2019-07-31 02:21:49.688 DMR, Opening DMR Network D: 2019-07-31 02:21:59.727 DMR, Sending authorisation D: 2019-07-31 02:21:59.753 DMR, Sending configuration M: 2019-07-31 02:21:59.784 DMR, Logged into the master successfully W: 2019-07-31 02:22:49.820 DMR, Login to the master has failed, retrying login ... Anyone else seeing this occur? Associated BrandMeister hotspot page appears normal. Thanks, Chris K7AZ
More All Messages By This Member
Re: Connection To BrandMeister Timing/Dropping Out #mmdvm_bridge Steve N4IRS #4677 Yes top will show what is running. Then I have no idea why it is disconnecting. Sent via smoke signal (AT&T) toggle quoted messageShow quoted text From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Chris K7AZ via Groups.Io <kilo7alphazulu@...> Sent: Tuesday, July 30, 2019 10:53:30 PM To: main@DVSwitch.groups.io <main@DVSwitch.groups.io> Subject: Re: [DVSwitch] Connection To BrandMeister Timing/Dropping Out #mmdvm_bridge Top shows one instance of MB running if that is the right place to look? Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/30/19 19:40 (GMT-08:00) To: main@dvswitch.groups.io Subject: Re: [DVSwitch] Connection To BrandMeister Timing/Dropping Out #mmdvm_bridge If I had to guess I would say you might have 2 instances of MB running. Sent via smoke signal (AT&T) From: main@... <main@DVSwitch.groups.io> on behalf of Chris K7AZ via Groups.Io <kilo7alphazulu@...> Sent: Tuesday, July 30, 2019 10:28:25 PM To: main@DVSwitch.groups.io <main@DVSwitch.groups.io> Subject: [DVSwitch] Connection To BrandMeister Timing/Dropping Out #mmdvm_bridge Sorry for the dumb question: Curious if getting reoccurring time/drop out messages on MMDVM_Bridge is normal? Seems to happen over a 2 minute period. W: 2019-07-31 02:20:49.689 DMR, Login to the master has failed, retrying login ... E: 2019-07-31 02:21:49.687 DMR, Connection to the master has timed out, retrying connection M: 2019-07-31 02:21:49.688 DMR, Closing DMR Network M: 2019-07-31 02:21:49.688 DMR, Opening DMR Network D: 2019-07-31 02:21:59.727 DMR, Sending authorisation D: 2019-07-31 02:21:59.753 DMR, Sending configuration M: 2019-07-31 02:21:59.784 DMR, Logged into the master successfully W: 2019-07-31 02:22:49.820 DMR, Login to the master has failed, retrying login ... Anyone else seeing this occur? Associated BrandMeister hotspot page appears normal. Thanks, Chris K7AZ
More All Messages By This Member
Re: Connection To BrandMeister Timing/Dropping Out #mmdvm_bridge Steve N4IRS #4676 Yes there is. Google the Linux command "ps" Sent via smoke signal (AT&T) toggle quoted messageShow quoted text From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Chris K7AZ via Groups.Io <kilo7alphazulu@...> Sent: Tuesday, July 30, 2019 10:46:43 PM To: main@DVSwitch.groups.io <main@DVSwitch.groups.io> Subject: Re: [DVSwitch] Connection To BrandMeister Timing/Dropping Out #mmdvm_bridge Hmmm, is there a way to look-see what is running? Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/30/19 19:40 (GMT-08:00) To: main@dvswitch.groups.io Subject: Re: [DVSwitch] Connection To BrandMeister Timing/Dropping Out #mmdvm_bridge If I had to guess I would say you might have 2 instances of MB running. Sent via smoke signal (AT&T) From: main@... <main@DVSwitch.groups.io> on behalf of Chris K7AZ via Groups.Io <kilo7alphazulu@...> Sent: Tuesday, July 30, 2019 10:28:25 PM To: main@DVSwitch.groups.io <main@DVSwitch.groups.io> Subject: [DVSwitch] Connection To BrandMeister Timing/Dropping Out #mmdvm_bridge Sorry for the dumb question: Curious if getting reoccurring time/drop out messages on MMDVM_Bridge is normal? Seems to happen over a 2 minute period. W: 2019-07-31 02:20:49.689 DMR, Login to the master has failed, retrying login ... E: 2019-07-31 02:21:49.687 DMR, Connection to the master has timed out, retrying connection M: 2019-07-31 02:21:49.688 DMR, Closing DMR Network M: 2019-07-31 02:21:49.688 DMR, Opening DMR Network D: 2019-07-31 02:21:59.727 DMR, Sending authorisation D: 2019-07-31 02:21:59.753 DMR, Sending configuration M: 2019-07-31 02:21:59.784 DMR, Logged into the master successfully W: 2019-07-31 02:22:49.820 DMR, Login to the master has failed, retrying login ... Anyone else seeing this occur? Associated BrandMeister hotspot page appears normal. Thanks, Chris K7AZ
More All Messages By This Member
Re: Connection To BrandMeister Timing/Dropping Out #mmdvm_bridge Chris K7AZ #4675 Top shows one instance of MB running if that is the right place to look? Sent from my Verizon, Samsung Galaxy smartphone toggle quoted messageShow quoted text -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/30/19 19:40 (GMT-08:00) To: main@dvswitch.groups.io Subject: Re: [DVSwitch] Connection To BrandMeister Timing/Dropping Out #mmdvm_bridge If I had to guess I would say you might have 2 instances of MB running. Sent via smoke signal (AT&T) From: main@... <main@DVSwitch.groups.io> on behalf of Chris K7AZ via Groups.Io <kilo7alphazulu@...> Sent: Tuesday, July 30, 2019 10:28:25 PM To: main@DVSwitch.groups.io <main@DVSwitch.groups.io> Subject: [DVSwitch] Connection To BrandMeister Timing/Dropping Out #mmdvm_bridge Sorry for the dumb question: Curious if getting reoccurring time/drop out messages on MMDVM_Bridge is normal? Seems to happen over a 2 minute period. W: 2019-07-31 02:20:49.689 DMR, Login to the master has failed, retrying login ... E: 2019-07-31 02:21:49.687 DMR, Connection to the master has timed out, retrying connection M: 2019-07-31 02:21:49.688 DMR, Closing DMR Network M: 2019-07-31 02:21:49.688 DMR, Opening DMR Network D: 2019-07-31 02:21:59.727 DMR, Sending authorisation D: 2019-07-31 02:21:59.753 DMR, Sending configuration M: 2019-07-31 02:21:59.784 DMR, Logged into the master successfully W: 2019-07-31 02:22:49.820 DMR, Login to the master has failed, retrying login ... Anyone else seeing this occur? Associated BrandMeister hotspot page appears normal. Thanks, Chris K7AZ
More All Messages By This Member
Re: Connection To BrandMeister Timing/Dropping Out #mmdvm_bridge Chris K7AZ #4674 Hmmm, is there a way to look-see what is running? Sent from my Verizon, Samsung Galaxy smartphone toggle quoted messageShow quoted text -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/30/19 19:40 (GMT-08:00) To: main@dvswitch.groups.io Subject: Re: [DVSwitch] Connection To BrandMeister Timing/Dropping Out #mmdvm_bridge If I had to guess I would say you might have 2 instances of MB running. Sent via smoke signal (AT&T) From: main@... <main@DVSwitch.groups.io> on behalf of Chris K7AZ via Groups.Io <kilo7alphazulu@...> Sent: Tuesday, July 30, 2019 10:28:25 PM To: main@DVSwitch.groups.io <main@DVSwitch.groups.io> Subject: [DVSwitch] Connection To BrandMeister Timing/Dropping Out #mmdvm_bridge Sorry for the dumb question: Curious if getting reoccurring time/drop out messages on MMDVM_Bridge is normal? Seems to happen over a 2 minute period. W: 2019-07-31 02:20:49.689 DMR, Login to the master has failed, retrying login ... E: 2019-07-31 02:21:49.687 DMR, Connection to the master has timed out, retrying connection M: 2019-07-31 02:21:49.688 DMR, Closing DMR Network M: 2019-07-31 02:21:49.688 DMR, Opening DMR Network D: 2019-07-31 02:21:59.727 DMR, Sending authorisation D: 2019-07-31 02:21:59.753 DMR, Sending configuration M: 2019-07-31 02:21:59.784 DMR, Logged into the master successfully W: 2019-07-31 02:22:49.820 DMR, Login to the master has failed, retrying login ... Anyone else seeing this occur? Associated BrandMeister hotspot page appears normal. Thanks, Chris K7AZ
More All Messages By This Member
Re: Connection To BrandMeister Timing/Dropping Out #mmdvm_bridge Steve N4IRS #4673 If I had to guess I would say you might have 2 instances of MB running. Sent via smoke signal (AT&T) toggle quoted messageShow quoted text From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Chris K7AZ via Groups.Io <kilo7alphazulu@...> Sent: Tuesday, July 30, 2019 10:28:25 PM To: main@DVSwitch.groups.io <main@DVSwitch.groups.io> Subject: [DVSwitch] Connection To BrandMeister Timing/Dropping Out #mmdvm_bridge Sorry for the dumb question: Curious if getting reoccurring time/drop out messages on MMDVM_Bridge is normal? Seems to happen over a 2 minute period. W: 2019-07-31 02:20:49.689 DMR, Login to the master has failed, retrying login ... E: 2019-07-31 02:21:49.687 DMR, Connection to the master has timed out, retrying connection M: 2019-07-31 02:21:49.688 DMR, Closing DMR Network M: 2019-07-31 02:21:49.688 DMR, Opening DMR Network D: 2019-07-31 02:21:59.727 DMR, Sending authorisation D: 2019-07-31 02:21:59.753 DMR, Sending configuration M: 2019-07-31 02:21:59.784 DMR, Logged into the master successfully W: 2019-07-31 02:22:49.820 DMR, Login to the master has failed, retrying login ... Anyone else seeing this occur? Associated BrandMeister hotspot page appears normal. Thanks, Chris K7AZ
More All Messages By This Member
Connection To BrandMeister Timing/Dropping Out #mmdvm_bridge Chris K7AZ #4672 Sorry for the dumb question: Curious if getting reoccurring time/drop out messages on MMDVM_Bridge is normal? Seems to happen over a 2 minute period. W: 2019-07-31 02:20:49.689 DMR, Login to the master has failed, retrying login ... E: 2019-07-31 02:21:49.687 DMR, Connection to the master has timed out, retrying connection M: 2019-07-31 02:21:49.688 DMR, Closing DMR Network M: 2019-07-31 02:21:49.688 DMR, Opening DMR Network D: 2019-07-31 02:21:59.727 DMR, Sending authorisation D: 2019-07-31 02:21:59.753 DMR, Sending configuration M: 2019-07-31 02:21:59.784 DMR, Logged into the master successfully W: 2019-07-31 02:22:49.820 DMR, Login to the master has failed, retrying login ... Anyone else seeing this occur? Associated BrandMeister hotspot page appears normal. Thanks, Chris K7AZ
More All Messages By This Member
Re: RF to RF bridge Neil k8it #4671 Ernest Can you please send me your contact information off list to k8it@... I have lots of questions and are willing to call you to decuss. 73 Neil k8it toggle quoted messageShow quoted text On Jul 30, 2019, at 6:25 PM, Ernest Pratt <erniepratt@...> wrote: I run a Dmr repeater and Wires-x Gateway from my location. its possible for me to talk back and forth without going out on the internet. I have also P25, NXDN and Teamspeak Connected. Most of the work can be done on one Pc running Debian but I have several Pc's PI's etc. Use XLX as your Dmr repeater. A GM340 radio with MMDVM Board to XLX to Openspot. There are lots of different options. Via Internet I have Zello, Peanut ,Dmr and Wiresx. I use dvswitch to go from ysf to P25., and Dmr to Dmr. Never had an 8 second delay going out on the internet. A couple of seconds is about normal.
More All Messages By This Member
Re: RF to RF bridge Ernie Gm7kbk #4670 I run a Dmr repeater and Wires-x Gateway from my location. its possible for me to talk back and forth without going out on the internet. I have also P25, NXDN and Teamspeak Connected. Most of the work can be done on one Pc running Debian but I have several Pc's PI's etc. Use XLX as your Dmr repeater. A GM340 radio with MMDVM Board to XLX to Openspot. There are lots of different options. Via Internet I have Zello, Peanut ,Dmr and Wiresx. I use dvswitch to go from ysf to P25., and Dmr to Dmr. Never had an 8 second delay going out on the internet. A couple of seconds is about normal.
More All Messages By This Member
Re: NOOB Setup-Configuration Help #analog_bridge #dmrlink Chris K7AZ #4669 My first DMR traffic. :) Still getting master time out msg.. Sent from my Verizon, Samsung Galaxy smartphone toggle quoted messageShow quoted text -------- Original message -------- From: "Chris K7AZ via Groups.Io" <kilo7alphazulu@...> Date: 7/30/19 14:11 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge I am pretty sure the problem was BM HotSpot Security. I disabled that and now getting successful log-in's but a minute later it says Log-on has failed.... screen shot attached. Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: "Chris K7AZ via Groups.Io" <kilo7alphazulu@...> Date: 7/30/19 13:14 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/30/19 12:54 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge OK, So can you copy and paste the log where MMDVM_Bridge is trying to log in? On 7/30/2019 3:53 PM, Chris K7AZ via Groups.Io wrote: Hi Steve, I read that wiki before I even started and just now read again. I really appreciate your help and hope to mentor others achieve success once it's all working. Yes, it can ping 3103.repeater.net with 18.5 ms avg response. Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/30/19 12:38 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge Looks OK. can you ping 3103.repeater.net? Chris, Before you reply please read this: <https://dvswitch.groups.io/g/main/wiki/Help%21> Steve N4IRS On 7/30/2019 3:33 PM, Chris K7AZ via Groups.Io wrote: See attached images. I also have TeamView if that helps. Chris Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/30/19 12:22 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge Chris, Since I can't look over your sholder, please post your [DMR] and [DMR Network] stanzas from MMDVM_Bridge.ini On 7/30/2019 3:13 PM, Chris K7AZ via Groups.Io wrote: I'm now able to see the foreground running of MMDVM_Bridge. It appears log-in to Master Failed. BM does not show 310689107. I set it to connect to 3103.repeater.net. Open to further hints :) Thank you, Chris K7AZ Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/30/19 06:26 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge The howto is a step by step. You should follow each step. The document had you CD to the directory before editing the .ini file. From: Chris K7AZ via Groups.Io Sent: Tuesday, July 30, 2019 9:22 AM To: main@... Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge I kinda knew I was missing something simple... that was it.. thank you. :) Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/30/19 06:11 (GMT-08:00) To: main@dvswitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge You should be in /opt/MMDVM_Bridge directory. Sent via smoke signal (AT&T) From: main@... <main@DVSwitch.groups.io> on behalf of Chris K7AZ via Groups.Io <kilo7alphazulu@...> Sent: Tuesday, July 30, 2019 9:09:35 AM To: main@DVSwitch.groups.io <main@DVSwitch.groups.io> Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge I'm entering that at the root level and it just says: bash: ./MMDVM_Bridge: No such file or directory. Maybe I'm at the wrong level? Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/30/19 02:32 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge It is the netx line in the document. Time to test Run MMDVM_Bridge in the foreground ./MMDVM_Bridge MMDVM_Bridge.ini No, the ports do not need to be forwarded. On 7/29/19 11:47 PM, Chris K7AZ via Groups.Io wrote: I'm stuck at: Time to test Run MMDVM_Bridge in the foreground. HOW? Also, do ports 62031 and 62032 need to be forwarded? Thanks, Chris K7AZ Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: "Chris K7AZ via Groups.Io" <kilo7alphazulu@...> Date: 7/29/19 08:45 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge Thanks Steve :) Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/29/19 08:42 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge <https://docs.google.com/document/d/1eN50Csr29eAprBu7eKA0Bfa2XUcsXw5iktY1Ey-Qjkg/edit?usp=sharing> Steve N4IRS On 7/29/2019 11:34 AM, Chris K7AZ via Groups.Io wrote: Seeking assistance setting up an ASL to DMR interface. Platform is a private VM server. I have an ASL node set up 29837 and I'm about 70% into the DMR transcoder part when things started to not cooperate. TeamViewer available. Evenings 6-8 PM CA time is best for me. Thank you, Chris K7AZ
More All Messages By This Member
Re: NOOB Setup-Configuration Help #analog_bridge #dmrlink Chris K7AZ #4668 I am pretty sure the problem was BM HotSpot Security. I disabled that and now getting successful log-in's but a minute later it says Log-on has failed.... screen shot attached. Sent from my Verizon, Samsung Galaxy smartphone toggle quoted messageShow quoted text -------- Original message -------- From: "Chris K7AZ via Groups.Io" <kilo7alphazulu@...> Date: 7/30/19 13:14 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/30/19 12:54 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge OK, So can you copy and paste the log where MMDVM_Bridge is trying to log in? On 7/30/2019 3:53 PM, Chris K7AZ via Groups.Io wrote: Hi Steve, I read that wiki before I even started and just now read again. I really appreciate your help and hope to mentor others achieve success once it's all working. Yes, it can ping 3103.repeater.net with 18.5 ms avg response. Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/30/19 12:38 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge Looks OK. can you ping 3103.repeater.net? Chris, Before you reply please read this: <https://dvswitch.groups.io/g/main/wiki/Help%21> Steve N4IRS On 7/30/2019 3:33 PM, Chris K7AZ via Groups.Io wrote: See attached images. I also have TeamView if that helps. Chris Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/30/19 12:22 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge Chris, Since I can't look over your sholder, please post your [DMR] and [DMR Network] stanzas from MMDVM_Bridge.ini On 7/30/2019 3:13 PM, Chris K7AZ via Groups.Io wrote: I'm now able to see the foreground running of MMDVM_Bridge. It appears log-in to Master Failed. BM does not show 310689107. I set it to connect to 3103.repeater.net. Open to further hints :) Thank you, Chris K7AZ Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/30/19 06:26 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge The howto is a step by step. You should follow each step. The document had you CD to the directory before editing the .ini file. From: Chris K7AZ via Groups.Io Sent: Tuesday, July 30, 2019 9:22 AM To: main@... Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge I kinda knew I was missing something simple... that was it.. thank you. :) Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/30/19 06:11 (GMT-08:00) To: main@dvswitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge You should be in /opt/MMDVM_Bridge directory. Sent via smoke signal (AT&T) From: main@... <main@DVSwitch.groups.io> on behalf of Chris K7AZ via Groups.Io <kilo7alphazulu@...> Sent: Tuesday, July 30, 2019 9:09:35 AM To: main@DVSwitch.groups.io <main@DVSwitch.groups.io> Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge I'm entering that at the root level and it just says: bash: ./MMDVM_Bridge: No such file or directory. Maybe I'm at the wrong level? Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/30/19 02:32 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge It is the netx line in the document. Time to test Run MMDVM_Bridge in the foreground ./MMDVM_Bridge MMDVM_Bridge.ini No, the ports do not need to be forwarded. On 7/29/19 11:47 PM, Chris K7AZ via Groups.Io wrote: I'm stuck at: Time to test Run MMDVM_Bridge in the foreground. HOW? Also, do ports 62031 and 62032 need to be forwarded? Thanks, Chris K7AZ Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: "Chris K7AZ via Groups.Io" <kilo7alphazulu@...> Date: 7/29/19 08:45 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge Thanks Steve :) Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/29/19 08:42 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge <https://docs.google.com/document/d/1eN50Csr29eAprBu7eKA0Bfa2XUcsXw5iktY1Ey-Qjkg/edit?usp=sharing> Steve N4IRS On 7/29/2019 11:34 AM, Chris K7AZ via Groups.Io wrote: Seeking assistance setting up an ASL to DMR interface. Platform is a private VM server. I have an ASL node set up 29837 and I'm about 70% into the DMR transcoder part when things started to not cooperate. TeamViewer available. Evenings 6-8 PM CA time is best for me. Thank you, Chris K7AZ
More All Messages By This Member
Re: NOOB Setup-Configuration Help #analog_bridge #dmrlink Chris K7AZ #4667 Sent from my Verizon, Samsung Galaxy smartphone toggle quoted messageShow quoted text -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/30/19 12:54 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge OK, So can you copy and paste the log where MMDVM_Bridge is trying to log in? On 7/30/2019 3:53 PM, Chris K7AZ via Groups.Io wrote: Hi Steve, I read that wiki before I even started and just now read again. I really appreciate your help and hope to mentor others achieve success once it's all working. Yes, it can ping 3103.repeater.net with 18.5 ms avg response. Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/30/19 12:38 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge Looks OK. can you ping 3103.repeater.net? Chris, Before you reply please read this: <https://dvswitch.groups.io/g/main/wiki/Help%21> Steve N4IRS On 7/30/2019 3:33 PM, Chris K7AZ via Groups.Io wrote: See attached images. I also have TeamView if that helps. Chris Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/30/19 12:22 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge Chris, Since I can't look over your sholder, please post your [DMR] and [DMR Network] stanzas from MMDVM_Bridge.ini On 7/30/2019 3:13 PM, Chris K7AZ via Groups.Io wrote: I'm now able to see the foreground running of MMDVM_Bridge. It appears log-in to Master Failed. BM does not show 310689107. I set it to connect to 3103.repeater.net. Open to further hints :) Thank you, Chris K7AZ Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/30/19 06:26 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge The howto is a step by step. You should follow each step. The document had you CD to the directory before editing the .ini file. From: Chris K7AZ via Groups.Io Sent: Tuesday, July 30, 2019 9:22 AM To: main@... Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge I kinda knew I was missing something simple... that was it.. thank you. :) Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/30/19 06:11 (GMT-08:00) To: main@dvswitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge You should be in /opt/MMDVM_Bridge directory. Sent via smoke signal (AT&T) From: main@... <main@DVSwitch.groups.io> on behalf of Chris K7AZ via Groups.Io <kilo7alphazulu@...> Sent: Tuesday, July 30, 2019 9:09:35 AM To: main@DVSwitch.groups.io <main@DVSwitch.groups.io> Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge I'm entering that at the root level and it just says: bash: ./MMDVM_Bridge: No such file or directory. Maybe I'm at the wrong level? Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/30/19 02:32 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge It is the netx line in the document. Time to test Run MMDVM_Bridge in the foreground ./MMDVM_Bridge MMDVM_Bridge.ini No, the ports do not need to be forwarded. On 7/29/19 11:47 PM, Chris K7AZ via Groups.Io wrote: I'm stuck at: Time to test Run MMDVM_Bridge in the foreground. HOW? Also, do ports 62031 and 62032 need to be forwarded? Thanks, Chris K7AZ Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: "Chris K7AZ via Groups.Io" <kilo7alphazulu@...> Date: 7/29/19 08:45 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge Thanks Steve :) Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/29/19 08:42 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge <https://docs.google.com/document/d/1eN50Csr29eAprBu7eKA0Bfa2XUcsXw5iktY1Ey-Qjkg/edit?usp=sharing> Steve N4IRS On 7/29/2019 11:34 AM, Chris K7AZ via Groups.Io wrote: Seeking assistance setting up an ASL to DMR interface. Platform is a private VM server. I have an ASL node set up 29837 and I'm about 70% into the DMR transcoder part when things started to not cooperate. TeamViewer available. Evenings 6-8 PM CA time is best for me. Thank you, Chris K7AZ
More All Messages By This Member
Re: NOOB Setup-Configuration Help #analog_bridge #dmrlink Steve N4IRS #4666 OK, So can you copy and paste the log where MMDVM_Bridge is trying to log in? toggle quoted messageShow quoted text On 7/30/2019 3:53 PM, Chris K7AZ via Groups.Io wrote: Hi Steve, I read that wiki before I even started and just now read again. I really appreciate your help and hope to mentor others achieve success once it's all working. Yes, it can ping 3103.repeater.net with 18.5 ms avg response. Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/30/19 12:38 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge Looks OK. can you ping 3103.repeater.net? Chris, Before you reply please read this: <https://dvswitch.groups.io/g/main/wiki/Help%21> Steve N4IRS On 7/30/2019 3:33 PM, Chris K7AZ via Groups.Io wrote: See attached images. I also have TeamView if that helps. Chris Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/30/19 12:22 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge Chris, Since I can't look over your sholder, please post your [DMR] and [DMR Network] stanzas from MMDVM_Bridge.ini On 7/30/2019 3:13 PM, Chris K7AZ via Groups.Io wrote: I'm now able to see the foreground running of MMDVM_Bridge. It appears log-in to Master Failed. BM does not show 310689107. I set it to connect to 3103.repeater.net. Open to further hints :) Thank you, Chris K7AZ Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/30/19 06:26 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge The howto is a step by step. You should follow each step. The document had you CD to the directory before editing the .ini file. From: Chris K7AZ via Groups.Io Sent: Tuesday, July 30, 2019 9:22 AM To: main@... Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge I kinda knew I was missing something simple... that was it.. thank you. :) Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/30/19 06:11 (GMT-08:00) To: main@dvswitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge You should be in /opt/MMDVM_Bridge directory. Sent via smoke signal (AT&T) From: main@... <main@DVSwitch.groups.io> on behalf of Chris K7AZ via Groups.Io <kilo7alphazulu@...> Sent: Tuesday, July 30, 2019 9:09:35 AM To: main@DVSwitch.groups.io <main@DVSwitch.groups.io> Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge I'm entering that at the root level and it just says: bash: ./MMDVM_Bridge: No such file or directory. Maybe I'm at the wrong level? Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/30/19 02:32 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge It is the netx line in the document. Time to test Run MMDVM_Bridge in the foreground ./MMDVM_Bridge MMDVM_Bridge.ini No, the ports do not need to be forwarded. On 7/29/19 11:47 PM, Chris K7AZ via Groups.Io wrote: I'm stuck at: Time to test Run MMDVM_Bridge in the foreground. HOW? Also, do ports 62031 and 62032 need to be forwarded? Thanks, Chris K7AZ Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: "Chris K7AZ via Groups.Io" <kilo7alphazulu@...> Date: 7/29/19 08:45 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge Thanks Steve :) Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/29/19 08:42 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge <https://docs.google.com/document/d/1eN50Csr29eAprBu7eKA0Bfa2XUcsXw5iktY1Ey-Qjkg/edit?usp=sharing> Steve N4IRS On 7/29/2019 11:34 AM, Chris K7AZ via Groups.Io wrote: Seeking assistance setting up an ASL to DMR interface. Platform is a private VM server. I have an ASL node set up 29837 and I'm about 70% into the DMR transcoder part when things started to not cooperate. TeamViewer available. Evenings 6-8 PM CA time is best for me. Thank you, Chris K7AZ
More All Messages By This Member
Re: NOOB Setup-Configuration Help #analog_bridge #dmrlink Chris K7AZ #4665 Hi Steve, I read that wiki before I even started and just now read again. I really appreciate your help and hope to mentor others achieve success once it's all working. Yes, it can ping 3103.repeater.net with 18.5 ms avg response. Sent from my Verizon, Samsung Galaxy smartphone toggle quoted messageShow quoted text -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/30/19 12:38 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge Looks OK. can you ping 3103.repeater.net? Chris, Before you reply please read this: <https://dvswitch.groups.io/g/main/wiki/Help%21> Steve N4IRS On 7/30/2019 3:33 PM, Chris K7AZ via Groups.Io wrote: See attached images. I also have TeamView if that helps. Chris Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/30/19 12:22 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge Chris, Since I can't look over your sholder, please post your [DMR] and [DMR Network] stanzas from MMDVM_Bridge.ini On 7/30/2019 3:13 PM, Chris K7AZ via Groups.Io wrote: I'm now able to see the foreground running of MMDVM_Bridge. It appears log-in to Master Failed. BM does not show 310689107. I set it to connect to 3103.repeater.net. Open to further hints :) Thank you, Chris K7AZ Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/30/19 06:26 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge The howto is a step by step. You should follow each step. The document had you CD to the directory before editing the .ini file. From: Chris K7AZ via Groups.Io Sent: Tuesday, July 30, 2019 9:22 AM To: main@... Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge I kinda knew I was missing something simple... that was it.. thank you. :) Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/30/19 06:11 (GMT-08:00) To: main@dvswitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge You should be in /opt/MMDVM_Bridge directory. Sent via smoke signal (AT&T) From: main@... <main@DVSwitch.groups.io> on behalf of Chris K7AZ via Groups.Io <kilo7alphazulu@...> Sent: Tuesday, July 30, 2019 9:09:35 AM To: main@DVSwitch.groups.io <main@DVSwitch.groups.io> Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge I'm entering that at the root level and it just says: bash: ./MMDVM_Bridge: No such file or directory. Maybe I'm at the wrong level? Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/30/19 02:32 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge It is the netx line in the document. Time to test Run MMDVM_Bridge in the foreground ./MMDVM_Bridge MMDVM_Bridge.ini No, the ports do not need to be forwarded. On 7/29/19 11:47 PM, Chris K7AZ via Groups.Io wrote: I'm stuck at: Time to test Run MMDVM_Bridge in the foreground. HOW? Also, do ports 62031 and 62032 need to be forwarded? Thanks, Chris K7AZ Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: "Chris K7AZ via Groups.Io" <kilo7alphazulu@...> Date: 7/29/19 08:45 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge Thanks Steve :) Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/29/19 08:42 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge <https://docs.google.com/document/d/1eN50Csr29eAprBu7eKA0Bfa2XUcsXw5iktY1Ey-Qjkg/edit?usp=sharing> Steve N4IRS On 7/29/2019 11:34 AM, Chris K7AZ via Groups.Io wrote: Seeking assistance setting up an ASL to DMR interface. Platform is a private VM server. I have an ASL node set up 29837 and I'm about 70% into the DMR transcoder part when things started to not cooperate. TeamViewer available. Evenings 6-8 PM CA time is best for me. Thank you, Chris K7AZ
More All Messages By This Member
Re: NOOB Setup-Configuration Help #analog_bridge #dmrlink Steve N4IRS #4664 Looks OK. can you ping 3103.repeater.net? Chris, Before you reply please read this: <https://dvswitch.groups.io/g/main/wiki/Help%21> Steve N4IRS toggle quoted messageShow quoted text On 7/30/2019 3:33 PM, Chris K7AZ via Groups.Io wrote: See attached images. I also have TeamView if that helps. Chris Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/30/19 12:22 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge Chris, Since I can't look over your sholder, please post your [DMR] and [DMR Network] stanzas from MMDVM_Bridge.ini On 7/30/2019 3:13 PM, Chris K7AZ via Groups.Io wrote: I'm now able to see the foreground running of MMDVM_Bridge. It appears log-in to Master Failed. BM does not show 310689107. I set it to connect to 3103.repeater.net. Open to further hints :) Thank you, Chris K7AZ Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/30/19 06:26 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge The howto is a step by step. You should follow each step. The document had you CD to the directory before editing the .ini file. From: Chris K7AZ via Groups.Io Sent: Tuesday, July 30, 2019 9:22 AM To: main@... Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge I kinda knew I was missing something simple... that was it.. thank you. :) Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/30/19 06:11 (GMT-08:00) To: main@dvswitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge You should be in /opt/MMDVM_Bridge directory. Sent via smoke signal (AT&T) From: main@... <main@DVSwitch.groups.io> on behalf of Chris K7AZ via Groups.Io <kilo7alphazulu@...> Sent: Tuesday, July 30, 2019 9:09:35 AM To: main@DVSwitch.groups.io <main@DVSwitch.groups.io> Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge I'm entering that at the root level and it just says: bash: ./MMDVM_Bridge: No such file or directory. Maybe I'm at the wrong level? Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/30/19 02:32 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge It is the netx line in the document. Time to test Run MMDVM_Bridge in the foreground ./MMDVM_Bridge MMDVM_Bridge.ini No, the ports do not need to be forwarded. On 7/29/19 11:47 PM, Chris K7AZ via Groups.Io wrote: I'm stuck at: Time to test Run MMDVM_Bridge in the foreground. HOW? Also, do ports 62031 and 62032 need to be forwarded? Thanks, Chris K7AZ Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: "Chris K7AZ via Groups.Io" <kilo7alphazulu@...> Date: 7/29/19 08:45 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge Thanks Steve :) Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/29/19 08:42 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge <https://docs.google.com/document/d/1eN50Csr29eAprBu7eKA0Bfa2XUcsXw5iktY1Ey-Qjkg/edit?usp=sharing> Steve N4IRS On 7/29/2019 11:34 AM, Chris K7AZ via Groups.Io wrote: Seeking assistance setting up an ASL to DMR interface. Platform is a private VM server. I have an ASL node set up 29837 and I'm about 70% into the DMR transcoder part when things started to not cooperate. TeamViewer available. Evenings 6-8 PM CA time is best for me. Thank you, Chris K7AZ
More All Messages By This Member
Re: NOOB Setup-Configuration Help #analog_bridge #dmrlink Chris K7AZ #4663 See attached images. I also have TeamView if that helps. Chris Sent from my Verizon, Samsung Galaxy smartphone toggle quoted messageShow quoted text -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/30/19 12:22 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge Chris, Since I can't look over your sholder, please post your [DMR] and [DMR Network] stanzas from MMDVM_Bridge.ini On 7/30/2019 3:13 PM, Chris K7AZ via Groups.Io wrote: I'm now able to see the foreground running of MMDVM_Bridge. It appears log-in to Master Failed. BM does not show 310689107. I set it to connect to 3103.repeater.net. Open to further hints :) Thank you, Chris K7AZ Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/30/19 06:26 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge The howto is a step by step. You should follow each step. The document had you CD to the directory before editing the .ini file. From: Chris K7AZ via Groups.Io Sent: Tuesday, July 30, 2019 9:22 AM To: main@... Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge I kinda knew I was missing something simple... that was it.. thank you. :) Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/30/19 06:11 (GMT-08:00) To: main@dvswitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge You should be in /opt/MMDVM_Bridge directory. Sent via smoke signal (AT&T) From: main@... <main@DVSwitch.groups.io> on behalf of Chris K7AZ via Groups.Io <kilo7alphazulu@...> Sent: Tuesday, July 30, 2019 9:09:35 AM To: main@DVSwitch.groups.io <main@DVSwitch.groups.io> Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge I'm entering that at the root level and it just says: bash: ./MMDVM_Bridge: No such file or directory. Maybe I'm at the wrong level? Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/30/19 02:32 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge It is the netx line in the document. Time to test Run MMDVM_Bridge in the foreground ./MMDVM_Bridge MMDVM_Bridge.ini No, the ports do not need to be forwarded. On 7/29/19 11:47 PM, Chris K7AZ via Groups.Io wrote: I'm stuck at: Time to test Run MMDVM_Bridge in the foreground. HOW? Also, do ports 62031 and 62032 need to be forwarded? Thanks, Chris K7AZ Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: "Chris K7AZ via Groups.Io" <kilo7alphazulu@...> Date: 7/29/19 08:45 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge Thanks Steve :) Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Steve N4IRS <szingman@...> Date: 7/29/19 08:42 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] NOOB Setup-Configuration Help #dmrlink #analog_bridge <https://docs.google.com/document/d/1eN50Csr29eAprBu7eKA0Bfa2XUcsXw5iktY1Ey-Qjkg/edit?usp=sharing> Steve N4IRS On 7/29/2019 11:34 AM, Chris K7AZ via Groups.Io wrote: Seeking assistance setting up an ASL to DMR interface. Platform is a private VM server. I have an ASL node set up 29837 and I'm about 70% into the DMR transcoder part when things started to not cooperate. TeamViewer available. Evenings 6-8 PM CA time is best for me. Thank you, Chris K7AZ
More All Messages By This Member
Re: RF to RF bridge Steve N4IRS #4662 We just installed a WiresX <-> DMR <-> YSF bridge here in FL and we have no delay. Don't know what to tell ya. But I'm kinda new at this. Only thing I can suggest is a back to back radio connection. Take the recovered audio from the DMR Radio and feed the Yaesu radio transmitter and vice versa. I don't how you would do the COS/PTT Steve N4IRS toggle quoted messageShow quoted text On 7/30/2019 3:24 PM, Neil k8it wrote: They just insulted a YSF wires x node called MICONNECT about one quarter mile away from me. Both my wife and I have DMR radios. When I tryed to use a hotspot the internet delays ranged from 5 to 8 seconds. This makes having a QSO convection almost impossible. Nobody waits that long between transmissions. You are lucky to get 5 seconds. What I want to do is to avoid the internet latency and create a RF to RF bridge. I know that these times were confirmed by others using hotspots. I also know that PiStar and the Openspot can crossmode. How can I do this without suffering the internet delays? The YSF repeater is least than a quarter mile away, and I want to have a local DMR connection in my hamshack. How do I do this? 73 Neil k8it On Jul 30, 2019, at 2:14 PM, Steve KC1AWV <smiller@...> wrote: If I am reading this right, I think what Neil is describing is a way for a DMR radio to talk with a Fusion radio, without needing to go to a reflector or other network. It's an interesting thought experiment, and here's what I think. Pi-Star to Pi-Star, probably not. Pi-Star is designed from the ground up to talk to existing networks, and from what I've seen there's no 'easy' way of making two Pi-Star hotspots talk to each other in that fashion. Even going from mode to mode on Pi-Star (say, DMR radio to a YSF reflector) uses the MMDVM_CM tools, if I recall correctly. Openspot has a hotspot-to-hotspot mode, but I believe it's limited to only passing same-mode traffic, like DMR to DMR. Having not done this myself, this is limited to speculation. If you've got two Pi-Star hotspots already, you could have both of them connect to a central 'server' locally, running something like HBlink3. Connect one as a DMR hotspot to the HBlink master and the other hotspot as a DMR2YSF hotspot to the HBlink master. Kind of like this: Pi-Star (DMR) <-> HBlink3 Master (Local) <-> Pi-Star (DMR2YSF) This kind of setup I would consider an 'advanced' configuration, but I think it could work. Going back on what Steve N4IRS said, where are you experiencing up to an 8 second delay on the Internet? Unless you're using dial-up or you're on the furthest reaches of a DSL line, I can't say I've seen latency that high in a long time. Steve KC1AWV
More All Messages By This Member

4521 - 4540 of 9096

Home Messages Hashtags Subgroups Wiki About Features Pricing Updates Terms Help Twitter