Date   

#dmrlink #dmrlink

SP2ONG Waldek
 

I am looking for some detailed description, tutorial on example IP adres/ DMR ID, example TG BM etc,  on how to configure DMRLink / IPSC_bridge / HB_Bridge / HBlink3 with repeater Motorola DR3000 drive connection which currently has a connection to Brandmesiter and we would like to connect it to the HBLink network as a backup network while maintaining connection with Brandmeister




We are pleased with the operation of local networks based on HBLink and because we have converters also Motorola, we want to connect them to this local network.


I must define MASTER for which will be connected our local repeater DR3000 and and PEER link to BM ? it DMRLink will be work simmilar like DMRGateway for MMDVM ? It wille be useful looking on examples config files for each program dmrlink.cfg etc

73 Waldek




Re: YSFReflector bridged to DMR - No callsign on YSF clients #mmdvm_bridge

Eric-K6KWB
 

Awesome! thanks Steve, will try that : )


Re: YSFReflector bridged to DMR - No callsign on YSF clients #mmdvm_bridge

Steve N4IRS
 

No,
We push the latest updates to github before I roll them up to the apt repository.
Go to <https://github.com/DVSwitch/MMDVM_Bridge/tree/master/bin> and find your version.
Then go to tmp and do this:
wget https://github.com/DVSwitch/MMDVM_Bridge/raw/master/bin/MMDVM_Bridge.what_is_your_hardware
mv MMDVM_Bridge.what_is_your_hardware to MMDVM_Bridge. Stop MMDVM_Bridge and replace the file.

Steve

On 8/13/19 7:26 PM, Eric Dayrit wrote:
Steve (N4IRS)

I had the same version of MB and same problem. If I re-install DVSwitch will pick up the update? or simply apt-get update will work?

Thanks,
Eric
I: 2019-08-01 22:10:22.030 This software is for use on amateur radio networks only,
I: 2019-08-01 22:10:22.030 it is to be used for educational purposes only. Its use on
I: 2019-08-01 22:10:22.030 commercial networks is strictly prohibited.
I: 2019-08-01 22:10:22.030 Copyright(C) 2015-2018 by Jonathan Naylor, G4KLX and others
M: 2019-08-01 22:10:22.030 MMDVM_Bridge-20180423 is starting
M: 2019-08-01 22:10:22.030 Built 15:47:01 May 30 2018 (GitID #9cdea41)
 


Re: YSFReflector bridged to DMR - No callsign on YSF clients #mmdvm_bridge

Eric-K6KWB
 

Steve (N4IRS)

I had the same version of MB and same problem. If I re-install DVSwitch will pick up the update? or simply apt-get update will work?

Thanks,
Eric
I: 2019-08-01 22:10:22.030 This software is for use on amateur radio networks only,
I: 2019-08-01 22:10:22.030 it is to be used for educational purposes only. Its use on
I: 2019-08-01 22:10:22.030 commercial networks is strictly prohibited.
I: 2019-08-01 22:10:22.030 Copyright(C) 2015-2018 by Jonathan Naylor, G4KLX and others
M: 2019-08-01 22:10:22.030 MMDVM_Bridge-20180423 is starting
M: 2019-08-01 22:10:22.030 Built 15:47:01 May 30 2018 (GitID #9cdea41)
 


Re: YSFReflector bridged to DMR - No callsign on YSF clients #mmdvm_bridge

Steve N4IRS
 

They are, we just have been pushing to github for testing before they get packaged up for Debian.

Steve N4IRS

On 8/13/19 5:54 PM, Andrew Lynch wrote:
Appears to work with latest MMDVM_Bridge.

Are the dvswitch packages for Debian (this was Debian 10 "Buster") no longer the preferred method? 

Thanks,
-Andy


Re: YSFReflector bridged to DMR - No callsign on YSF clients #mmdvm_bridge

Andrew Lynch
 

Appears to work with latest MMDVM_Bridge.

Are the dvswitch packages for Debian (this was Debian 10 "Buster") no longer the preferred method? 

Thanks,
-Andy


Re: YSFReflector bridged to DMR - No callsign on YSF clients #mmdvm_bridge

Andrew Lynch
 

Will do, won't be until later since I don't have a YSF handy right now.

On Tue, Aug 13, 2019 at 2:52 PM Steve N4IRS <szingman@...> wrote:
grab the latest binary from the bin directory and retest.

On 8/13/2019 3:51 PM, Andrew Lynch wrote:
It's the repository version: MMDVM_Bridge version 20180423 git #9cdea41

Perhaps I should compile from source?



--
Andrew Lynch (KD0IOE)
lurch89@...


Re: YSFReflector bridged to DMR - No callsign on YSF clients #mmdvm_bridge

Steve N4IRS
 

grab the latest binary from the bin directory and retest.

On 8/13/2019 3:51 PM, Andrew Lynch wrote:
It's the repository version: MMDVM_Bridge version 20180423 git #9cdea41

Perhaps I should compile from source?


Re: YSFReflector bridged to DMR - No callsign on YSF clients #mmdvm_bridge

Andrew Lynch
 

It's the repository version: MMDVM_Bridge version 20180423 git #9cdea41

Perhaps I should compile from source?


Re: YSFReflector bridged to DMR - No callsign on YSF clients #mmdvm_bridge

Steve N4IRS
 

You are using the latest MMDVM_Bridge from here <https://github.com/DVSwitch/MMDVM_Bridge>?

On 8/13/2019 3:45 PM, Andrew Lynch wrote:
MMDVM_Bridge Log:
E: 2019-08-13 07:28:34.630 DMR, Connection to the master has timed out, retrying connection
M: 2019-08-13 07:28:34.630 DMR, Closing DMR Network
M: 2019-08-13 07:28:34.631 DMR, Opening DMR Network
E: 2019-08-13 07:29:44.641 DMR, Connection to the master has timed out, retrying connection
M: 2019-08-13 07:29:44.641 DMR, Closing DMR Network
M: 2019-08-13 07:29:44.641 DMR, Opening DMR Network
E: 2019-08-13 07:30:54.654 DMR, Connection to the master has timed out, retrying connection
M: 2019-08-13 07:30:54.654 DMR, Closing DMR Network
M: 2019-08-13 07:30:54.654 DMR, Opening DMR Network
M: 2019-08-13 07:31:14.821 DMR, Logged into the master successfully
M: 2019-08-13 12:00:21.723 DMR Slot 2, received network voice header from K0CQW to TG 707
M: 2019-08-13 12:00:21.724 YSF, TX state = ON
I: 2019-08-13 12:00:21.724 YSF, Begin TX: src=3127285 rpt=0 dst=707 slot=2 cc=0 metadata=K0CQW
I: 2019-08-13 12:00:21.962 YSF, Narrow transmit (72 bit)
M: 2019-08-13 12:00:27.661 DMR Slot 2, received network end of voice transmission, 5.9 seconds, 0% packet loss, BER: 0.0%
M: 2019-08-13 12:00:27.661 YSF, TX state = OFF
M: 2019-08-13 12:26:25.812 DMR Slot 2, received network voice header from KD0IOE to TG 707
M: 2019-08-13 12:26:25.812 YSF, TX state = ON
I: 2019-08-13 12:26:25.812 YSF, Begin TX: src=3138002 rpt=0 dst=707 slot=2 cc=0 metadata=KD0IOE
I: 2019-08-13 12:26:25.834 YSF, Narrow transmit (72 bit)
M: 2019-08-13 12:26:27.838 DMR Slot 2, received network end of voice transmission, 2.8 seconds, 0% packet loss, BER: 10.1%
M: 2019-08-13 12:26:27.838 YSF, TX state = OFF
M: 2019-08-13 12:30:51.837 DMR Slot 2, received network voice header from KD0IOE to TG 707
M: 2019-08-13 12:30:51.837 YSF, TX state = ON
I: 2019-08-13 12:30:51.837 YSF, Begin TX: src=3138002 rpt=0 dst=707 slot=2 cc=0 metadata=KD0IOE
I: 2019-08-13 12:30:51.858 YSF, Narrow transmit (72 bit)
M: 2019-08-13 12:30:56.149 DMR Slot 2, received network end of voice transmission, 5.0 seconds, 0% packet loss, BER: 0.0%
M: 2019-08-13 12:30:56.150 YSF, TX state = OFF
M: 2019-08-13 12:37:35.674 DMR Slot 2, received network voice header from KD0IOE to TG 707
M: 2019-08-13 12:37:35.674 YSF, TX state = ON
I: 2019-08-13 12:37:35.674 YSF, Begin TX: src=3138002 rpt=0 dst=707 slot=2 cc=0 metadata=KD0IOE
I: 2019-08-13 12:37:35.695 YSF, Narrow transmit (72 bit)
M: 2019-08-13 12:37:37.691 DMR Slot 2, received network end of voice transmission, 2.4 seconds, 0% packet loss, BER: 11.7%
M: 2019-08-13 12:37:37.691 YSF, TX state = OFF
M: 2019-08-13 14:29:26.293 DMR Slot 2, received network voice header from W0JPJ to TG 707
M: 2019-08-13 14:29:26.293 YSF, TX state = ON
I: 2019-08-13 14:29:26.294 YSF, Begin TX: src=3127040 rpt=0 dst=707 slot=2 cc=0 metadata=W0JPJ
W: 2019-08-13 14:29:26.446 DMR Slot 2, unhandled network data type - 0x0F
I: 2019-08-13 14:29:26.578 YSF, Narrow transmit (72 bit)
M: 2019-08-13 14:29:27.114 DMR Talker Alias (Data Format 1, Received 6/11 char): 'W0JPJ '
M: 2019-08-13 14:29:27.837 DMR Talker Alias (Data Format 1, Received 11/11 char): 'W0JPJ Jarod'
M: 2019-08-13 14:29:29.758 DMR Slot 2, received network end of voice transmission, 3.4 seconds, 0% packet loss, BER: 0.0%
M: 2019-08-13 14:29:29.758 YSF, TX state = OFF
M: 2019-08-13 15:40:22.870 DMR Slot 2, received network voice header from W0JPJ to TG 707
M: 2019-08-13 15:40:22.871 YSF, TX state = ON
I: 2019-08-13 15:40:22.871 YSF, Begin TX: src=3127040 rpt=0 dst=707 slot=2 cc=0 metadata=W0JPJ
I: 2019-08-13 15:40:22.902 YSF, Narrow transmit (72 bit)
M: 2019-08-13 15:40:23.070 DMR Talker Alias (Data Format 1, Received 6/11 char): 'W0JPJ '
M: 2019-08-13 15:40:23.787 DMR Talker Alias (Data Format 1, Received 11/11 char): 'W0JPJ Jarod'
M: 2019-08-13 15:40:26.790 DMR Slot 2, received network end of voice transmission, 4.4 seconds, 0% packet loss, BER: 0.0%
M: 2019-08-13 15:40:26.790 YSF, TX state = OFF
M: 2019-08-13 19:31:26.996 DMR Slot 2, received network voice header from K0CQW to TG 707
M: 2019-08-13 19:31:26.996 YSF, TX state = ON
I: 2019-08-13 19:31:26.997 YSF, Begin TX: src=3127285 rpt=0 dst=707 slot=2 cc=0 metadata=K0CQW
I: 2019-08-13 19:31:27.232 YSF, Narrow transmit (72 bit)
M: 2019-08-13 19:31:28.611 DMR Slot 2, received network end of voice transmission, 1.6 seconds, 0% packet loss, BER: 0.0%
M: 2019-08-13 19:31:28.611 YSF, TX state = OFF


Re: YSFReflector bridged to DMR - No callsign on YSF clients #mmdvm_bridge

Andrew Lynch
 

MMDVM Log (this time with better HTML formatting)
E: 2019-08-13 07:28:34.630 DMR, Connection to the master has timed out, retrying connection
M: 2019-08-13 07:28:34.630 DMR, Closing DMR Network
M: 2019-08-13 07:28:34.631 DMR, Opening DMR Network
E: 2019-08-13 07:29:44.641 DMR, Connection to the master has timed out, retrying connection
M: 2019-08-13 07:29:44.641 DMR, Closing DMR Network
M: 2019-08-13 07:29:44.641 DMR, Opening DMR Network
E: 2019-08-13 07:30:54.654 DMR, Connection to the master has timed out, retrying connection
M: 2019-08-13 07:30:54.654 DMR, Closing DMR Network
M: 2019-08-13 07:30:54.654 DMR, Opening DMR Network
M: 2019-08-13 07:31:14.821 DMR, Logged into the master successfully
M: 2019-08-13 12:00:21.723 DMR Slot 2, received network voice header from K0CQW to TG 707
M: 2019-08-13 12:00:21.724 YSF, TX state = ON
I: 2019-08-13 12:00:21.724 YSF, Begin TX: src=3127285 rpt=0 dst=707 slot=2 cc=0 metadata=K0CQW

I: 2019-08-13 12:00:21.962 YSF, Narrow transmit (72 bit)
M: 2019-08-13 12:00:27.661 DMR Slot 2, received network end of voice transmission, 5.9 seconds, 0% packet loss, BER: 0.0%
M: 2019-08-13 12:00:27.661 YSF, TX state = OFF
M: 2019-08-13 12:26:25.812 DMR Slot 2, received network voice header from KD0IOE to TG 707
M: 2019-08-13 12:26:25.812 YSF, TX state = ON
I: 2019-08-13 12:26:25.812 YSF, Begin TX: src=3138002 rpt=0 dst=707 slot=2 cc=0 metadata=KD0IOE

I: 2019-08-13 12:26:25.834 YSF, Narrow transmit (72 bit)
M: 2019-08-13 12:26:27.838 DMR Slot 2, received network end of voice transmission, 2.8 seconds, 0% packet loss, BER: 10.1%
M: 2019-08-13 12:26:27.838 YSF, TX state = OFF
M: 2019-08-13 12:30:51.837 DMR Slot 2, received network voice header from KD0IOE to TG 707
M: 2019-08-13 12:30:51.837 YSF, TX state = ON
I: 2019-08-13 12:30:51.837 YSF, Begin TX: src=3138002 rpt=0 dst=707 slot=2 cc=0 metadata=KD0IOE

I: 2019-08-13 12:30:51.858 YSF, Narrow transmit (72 bit)
M: 2019-08-13 12:30:56.149 DMR Slot 2, received network end of voice transmission, 5.0 seconds, 0% packet loss, BER: 0.0%
M: 2019-08-13 12:30:56.150 YSF, TX state = OFF
M: 2019-08-13 12:37:35.674 DMR Slot 2, received network voice header from KD0IOE to TG 707
M: 2019-08-13 12:37:35.674 YSF, TX state = ON
I: 2019-08-13 12:37:35.674 YSF, Begin TX: src=3138002 rpt=0 dst=707 slot=2 cc=0 metadata=KD0IOE

I: 2019-08-13 12:37:35.695 YSF, Narrow transmit (72 bit)
M: 2019-08-13 12:37:37.691 DMR Slot 2, received network end of voice transmission, 2.4 seconds, 0% packet loss, BER: 11.7%
M: 2019-08-13 12:37:37.691 YSF, TX state = OFF
M: 2019-08-13 14:29:26.293 DMR Slot 2, received network voice header from W0JPJ to TG 707
M: 2019-08-13 14:29:26.293 YSF, TX state = ON
I: 2019-08-13 14:29:26.294 YSF, Begin TX: src=3127040 rpt=0 dst=707 slot=2 cc=0 metadata=W0JPJ

W: 2019-08-13 14:29:26.446 DMR Slot 2, unhandled network data type - 0x0F
I: 2019-08-13 14:29:26.578 YSF, Narrow transmit (72 bit)
M: 2019-08-13 14:29:27.114 DMR Talker Alias (Data Format 1, Received 6/11 char): 'W0JPJ '
M: 2019-08-13 14:29:27.837 DMR Talker Alias (Data Format 1, Received 11/11 char): 'W0JPJ Jarod'
M: 2019-08-13 14:29:29.758 DMR Slot 2, received network end of voice transmission, 3.4 seconds, 0% packet loss, BER: 0.0%
M: 2019-08-13 14:29:29.758 YSF, TX state = OFF
M: 2019-08-13 15:40:22.870 DMR Slot 2, received network voice header from W0JPJ to TG 707
M: 2019-08-13 15:40:22.871 YSF, TX state = ON
I: 2019-08-13 15:40:22.871 YSF, Begin TX: src=3127040 rpt=0 dst=707 slot=2 cc=0 metadata=W0JPJ

I: 2019-08-13 15:40:22.902 YSF, Narrow transmit (72 bit)
M: 2019-08-13 15:40:23.070 DMR Talker Alias (Data Format 1, Received 6/11 char): 'W0JPJ '
M: 2019-08-13 15:40:23.787 DMR Talker Alias (Data Format 1, Received 11/11 char): 'W0JPJ Jarod'
M: 2019-08-13 15:40:26.790 DMR Slot 2, received network end of voice transmission, 4.4 seconds, 0% packet loss, BER: 0.0%
M: 2019-08-13 15:40:26.790 YSF, TX state = OFF
M: 2019-08-13 19:31:26.996 DMR Slot 2, received network voice header from K0CQW to TG 707
M: 2019-08-13 19:31:26.996 YSF, TX state = ON
I: 2019-08-13 19:31:26.997 YSF, Begin TX: src=3127285 rpt=0 dst=707 slot=2 cc=0 metadata=K0CQW

I: 2019-08-13 19:31:27.232 YSF, Narrow transmit (72 bit)
M: 2019-08-13 19:31:28.611 DMR Slot 2, received network end of voice transmission, 1.6 seconds, 0% packet loss, BER: 0.0%
M: 2019-08-13 19:31:28.611 YSF, TX state = OFF


Re: YSFReflector bridged to DMR - No callsign on YSF clients #mmdvm_bridge

Steve N4IRS
 

OK,
Can you show me the log output when traffic is passing across the bridge?

On 8/13/2019 3:39 PM, Andrew Lynch wrote:
MMDVM_Bridge from YSF to DMR, no Analog_Bridge or anything in between.



On Tue, Aug 13, 2019 at 2:03 PM Steve N4IRS <szingman@...> wrote:
Andy,
What program are you using to line the reflector to the TG?

Steve N4IRS

On 8/13/2019 2:41 PM, Andrew Lynch wrote:
Nope, this is a specific TG on the TGIF network, not the main one.

On Tue, Aug 13, 2019 at 1:32 PM Alec-N1AJW <alec.wasserman@...> wrote:
the TGIF YSF2DMR bridge has mysteriously started working again.  update pistar and the host should be there.  I know that's not the answer to your question but you wont have to do this since its "mysteriously" started working.


Alec
N1AJW


--
Andrew Lynch (KD0IOE)
lurch89@...



--
Andrew Lynch (KD0IOE)
lurch89@...


Re: YSFReflector bridged to DMR - No callsign on YSF clients #mmdvm_bridge

Andrew Lynch
 

MMDVM_Bridge from YSF to DMR, no Analog_Bridge or anything in between.



On Tue, Aug 13, 2019 at 2:03 PM Steve N4IRS <szingman@...> wrote:
Andy,
What program are you using to line the reflector to the TG?

Steve N4IRS

On 8/13/2019 2:41 PM, Andrew Lynch wrote:
Nope, this is a specific TG on the TGIF network, not the main one.

On Tue, Aug 13, 2019 at 1:32 PM Alec-N1AJW <alec.wasserman@...> wrote:
the TGIF YSF2DMR bridge has mysteriously started working again.  update pistar and the host should be there.  I know that's not the answer to your question but you wont have to do this since its "mysteriously" started working.


Alec
N1AJW


--
Andrew Lynch (KD0IOE)
lurch89@...



--
Andrew Lynch (KD0IOE)
lurch89@...


Re: YSFReflector bridged to DMR - No callsign on YSF clients #mmdvm_bridge

Steve N4IRS
 

Andy,
What program are you using to line the reflector to the TG?

Steve N4IRS

On 8/13/2019 2:41 PM, Andrew Lynch wrote:
Nope, this is a specific TG on the TGIF network, not the main one.

On Tue, Aug 13, 2019 at 1:32 PM Alec-N1AJW <alec.wasserman@...> wrote:
the TGIF YSF2DMR bridge has mysteriously started working again.  update pistar and the host should be there.  I know that's not the answer to your question but you wont have to do this since its "mysteriously" started working.


Alec
N1AJW


--
Andrew Lynch (KD0IOE)
lurch89@...


Re: YSFReflector bridged to DMR - No callsign on YSF clients #mmdvm_bridge

Andrew Lynch
 

Nope, this is a specific TG on the TGIF network, not the main one.

On Tue, Aug 13, 2019 at 1:32 PM Alec-N1AJW <alec.wasserman@...> wrote:
the TGIF YSF2DMR bridge has mysteriously started working again.  update pistar and the host should be there.  I know that's not the answer to your question but you wont have to do this since its "mysteriously" started working.


Alec
N1AJW



--
Andrew Lynch (KD0IOE)
lurch89@...


Re: YSFReflector bridged to DMR - No callsign on YSF clients #mmdvm_bridge

Alec-N1AJW
 

the TGIF YSF2DMR bridge has mysteriously started working again.  update pistar and the host should be there.  I know that's not the answer to your question but you wont have to do this since its "mysteriously" started working.


Alec
N1AJW


YSFReflector bridged to DMR - No callsign on YSF clients #mmdvm_bridge

Andrew Lynch
 

I have successfully set up a YSFReflector, and linked to a TGIF DMR talkgroup. Audio passes between the two, and the DMR ID lookup based on the MYCALL in a given Yaesu radio is working (DMR side sees the proper DMR ID of the YSF user). However, I can't seem to get callsigns to display on the Yaesu radio. I am using a Pi-Star-powered hotspot (3.14.7 I think), and the Callsigns appear on both the OLED display and on the dashboard. That leads me to think it's my hotspot not sending it along with the voice. But, I don't remember this actually working anywhere on YSF. This is my first sysop experience with YSF - I've mostly just participated on DMR, but wanted to have the option of YSF as well.

Is this expected behavior (callsign doesn't make it to the radio) or am I missing a config somewhere? I don't have a second hotspot (...yet) that I can test (have 2 YSF clients on the YSFReflector) and haven't found a guinea pig yet.

Thanks!
-Andy, KDØIOE


Re: Setting up a remote base to DMR

Vince Vielhaber
 

In my case the antenna tuner is manual, so for now I have to go fixed freq. In the future I may be able to add an auto tuner (I have several).

Another feature in ASL's remote base stuff, it has memories. Go to a certain freq, PL Tone, Offset or Simplex, ...

Vince.

On 08/12/2019 06:25 PM, Steve KC1AWV wrote:
You know as I'm thinking about it, ASL has macros for controlling a base
station built into app_rpt already. So, using DVSwitch Mobile will give
you the ability to tune and such the remote base as if you were there at
the rig. This is giving me ideas... :)

Steve KC1AWV


Re: Setting up a remote base to DMR

Steve KC1AWV
 

You know as I'm thinking about it, ASL has macros for controlling a base station built into app_rpt already. So, using DVSwitch Mobile will give you the ability to tune and such the remote base as if you were there at the rig. This is giving me ideas... :)

Steve KC1AWV


Re: Setting up a remote base to DMR

Steve KC1AWV
 

DVSwitch Mobile is the Android/iPhone client used in lieu of needing a hotspot and digital radio, and it used to be called Android IAXRPT. Using DVSwitch Mobile, you can connect to ASL, DMR, DStar, YSF, NXDN, and P25 networks. It's quite a neat piece of software!

Steve KC1AWV