Date   

Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge

Mike Zingman - N4IRR
 

SteveZ,

I see the XLX checkin on July 2.  The July 1 checkin was not working/complete.  


Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge

Steve KC1AWV
 

Sometimes, I like to live in the past. Here's the logs from XLX and MB Jul 1 2019 build - still no connection to module I

--- XLX log ---
Oct  3 14:02:41 xlx740 xlxd: DMRmmdvm connect packet from KC1AWV  B at 45.32.193.119
Oct  3 14:02:41 xlx740 xlxd: DMRmmdvm authentication packet from KC1AWV  B at 45.32.193.119
Oct  3 14:02:41 xlx740 xlxd: DMRmmdvm configuration packet from KC1AWV  B at 45.32.193.119
Oct  3 14:02:41 xlx740 xlxd: DMRmmdvm options packet from KC1AWV  B at 45.32.193.119

--- MB log ---
root@test:/opt/MMDVM_Bridge_2# ./MMDVM_Bridge MMDVM_Bridge.ini
I: 2019-10-03 18:02:31.326 MMDVM_Bridge:
I: 2019-10-03 18:02:31.326 Portions Copyright (C) 2018 DVSwitch, INAD.
I: 2019-10-03 18:02:31.326 Hacks by Mike N4IRR and Steve N4IRS
I: 2019-10-03 18:02:31.326 =
I: 2019-10-03 16:24:08.319 This software is for use on amateur radio networks only,
I: 2019-10-03 16:24:08.319 it is to be used for educational purposes only. Its use on
I: 2019-10-03 16:24:08.319 commercial networks is strictly prohibited.
I: 2019-10-03 16:24:08.319 Copyright(C) 2015-2018 by Jonathan Naylor, G4KLX and others
M: 2019-10-03 16:24:08.319 MMDVM_Bridge-20180423 is starting
M: 2019-10-03 16:24:08.319 Built 10:47:32 Jun 24 2019 (GitID #30648ec)
I: 2019-10-03 16:24:08.319 General Parameters
I: 2019-10-03 16:24:08.319     Callsign: KC1AWV
I: 2019-10-03 16:24:08.319     Id: 3122790
I: 2019-10-03 16:24:08.319     Duplex: no
I: 2019-10-03 16:24:08.320     Timeout: 180s
I: 2019-10-03 16:24:08.320     D-Star: disabled
I: 2019-10-03 16:24:08.320     DMR: enabled
I: 2019-10-03 16:24:08.320     YSF: disabled
I: 2019-10-03 16:24:08.320     P25: disabled
I: 2019-10-03 16:24:08.320     NXDN: disabled
I: 2019-10-03 16:24:08.320 Modem Parameters
I: 2019-10-03 16:24:08.320     Port: /dev/null
I: 2019-10-03 16:24:08.320     RX Invert: no
I: 2019-10-03 16:24:08.320     TX Invert: no
I: 2019-10-03 16:24:08.320     PTT Invert: no
I: 2019-10-03 16:24:08.320     TX Delay: 100ms
I: 2019-10-03 16:24:08.320     RX Offset: 0Hz
I: 2019-10-03 16:24:08.320     TX Offset: 0Hz
I: 2019-10-03 16:24:08.320     RX DC Offset: 0
I: 2019-10-03 16:24:08.320     TX DC Offset: 0
I: 2019-10-03 16:24:08.320     RF Level: 100.0%
I: 2019-10-03 16:24:08.320     DMR Delay: 0 (0.0ms)
I: 2019-10-03 16:24:08.320     RX Level: 50.0%
I: 2019-10-03 16:24:08.320     CW Id TX Level: 50.0%
I: 2019-10-03 16:24:08.320     D-Star TX Level: 50.0%
I: 2019-10-03 16:24:08.320     DMR TX Level: 50.0%
I: 2019-10-03 16:24:08.320     YSF TX Level: 50.0%
I: 2019-10-03 16:24:08.320     P25 TX Level: 50.0%
I: 2019-10-03 16:24:08.320     NXDN TX Level: 50.0%
I: 2019-10-03 16:24:08.320     RX Frequency: 0Hz (0Hz)
I: 2019-10-03 16:24:08.321     TX Frequency: 0Hz (0Hz)
M: 2019-10-03 16:24:08.321 Opening the MMDVM
I: 2019-10-03 16:24:08.321 Display Parameters
I: 2019-10-03 16:24:08.321     Type:
I: 2019-10-03 16:24:08.321 DMR Network Parameters
I: 2019-10-03 16:24:08.321     Address: 173.208.200.180
I: 2019-10-03 16:24:08.321     Port: 62030
I: 2019-10-03 16:24:08.321     Local: 62331
I: 2019-10-03 16:24:08.321     Jitter: 360ms
I: 2019-10-03 16:24:08.321     Slot 1: enabled
I: 2019-10-03 16:24:08.321     Slot 2: enabled
I: 2019-10-03 16:24:08.321     Mode Hang: 3s
I: 2019-10-03 16:24:08.321     Options: XLX:4009
I: 2019-10-03 16:24:08.321 Info Parameters
I: 2019-10-03 16:24:08.321     Callsign: KC1AWV
I: 2019-10-03 16:24:08.321     RX Frequency: 0Hz
I: 2019-10-03 16:24:08.321     TX Frequency: 0Hz
I: 2019-10-03 16:24:08.321     Power: 1W
I: 2019-10-03 16:24:08.321     Latitude: 41.733299deg N
I: 2019-10-03 16:24:08.321     Longitude: -50.399899deg E
I: 2019-10-03 16:24:08.321     Height: 0m
I: 2019-10-03 16:24:08.321     Location: "Test Bridge"
I: 2019-10-03 16:24:08.321     Description: "MMDVM_Bridge"
I: 2019-10-03 16:24:08.321     URL: "https://www.erdn.net"
M: 2019-10-03 16:24:08.321 DMR, Opening DMR Network
I: 2019-10-03 16:24:08.321 RSSI
I: 2019-10-03 16:24:08.322     Mapping File: RSSI.dat
W: 2019-10-03 16:24:08.322 Cannot open the RSSI data file - RSSI.dat
I: 2019-10-03 16:24:08.322 DMR Id Lookups
I: 2019-10-03 16:24:08.322     File: /var/lib/mmdvm/DMRIds.dat
I: 2019-10-03 16:24:08.322     Reload: 24 hours
I: 2019-10-03 16:24:08.425 Loaded 145176 Ids to the DMR callsign lookup table
I: 2019-10-03 16:24:08.425 DMR RF Parameters
I: 2019-10-03 16:24:08.425     Id: 3122790
I: 2019-10-03 16:24:08.425     Color Code: 1
I: 2019-10-03 16:24:08.425     Self Only: no
I: 2019-10-03 16:24:08.425     Embedded LC Only: yes
I: 2019-10-03 16:24:08.425     Dump Talker Alias Data: no
I: 2019-10-03 16:24:08.425     Prefixes: 0
I: 2019-10-03 16:24:08.425     Call Hang: 3s
I: 2019-10-03 16:24:08.425     TX Hang: 3s
I: 2019-10-03 16:24:08.425     Mode Hang: 10s
M: 2019-10-03 16:24:08.426 DMR, Opening INI file: DVSwitch.ini
M: 2019-10-03 16:24:08.426 DMR, Setting [DMR] Address -> 127.0.0.1
M: 2019-10-03 16:24:08.426 DMR, Setting [DMR] TXPort -> 33100
M: 2019-10-03 16:24:08.426 DMR, Setting [DMR] RXPort -> 33103
M: 2019-10-03 16:24:08.426 DMR, Setting [DMR] Slot -> 2
M: 2019-10-03 16:24:08.426 DMR, Transmitting on 127.0.0.1:33100 and listening on port 33103.  Result = 1
M: 2019-10-03 16:24:08.426 MMDVM_Bridge-20180423 is running
I: 2019-10-03 16:24:08.426 Started the DMR Id lookup reload thread
D: 2019-10-03 16:24:18.443 DMR, Sending authorisation
D: 2019-10-03 16:24:18.459 DMR, Sending configuration
D: 2019-10-03 16:24:18.474 DMR, Sending options
M: 2019-10-03 16:24:18.489 DMR, Logged into the master successfully

On Thu, Oct 3, 2019 at 12:11 PM Mike Zingman - N4IRR <mike.zingman@...> wrote:
Correct syntax for MB is

Options
=XLX:4009


--
Steve Miller
KC1AWV



--
Steve Miller
KC1AWV


Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge

Steve N4IRS
 

Steve, most current build on github is July 1 2019. You are Jun 24 2019.

Steve N4IRS

On 10/3/2019 12:30 PM, Steve KC1AWV wrote:
Testing now, but no connect to module with MB. I'm including the HBL log lines for comparison as well. Version issue? Maybe my MB is older...

--- HBlink connect to XLX ---
Oct  3 12:23:56 xlx740 xlxd: DMRmmdvm connect packet from KC1AWV  B at 45.32.193.119
Oct  3 12:23:56 xlx740 xlxd: DMRmmdvm authentication packet from KC1AWV  B at 45.32.193.119
Oct  3 12:23:56 xlx740 xlxd: DMRmmdvm login from KC1AWV  B at 45.32.193.119
Oct  3 12:23:56 xlx740 xlxd: New client KC1AWV  B at 45.32.193.119 added with protocol DMRMmdvm
Oct  3 12:23:56 xlx740 xlxd: DMRmmdvm configuration packet from KC1AWV  B at 45.32.193.119
Oct  3 12:23:56 xlx740 xlxd: DMRmmdvm client KC1AWV  B linking on module H

--- MB connect to XLX ---
Oct  3 12:24:18 xlx740 xlxd: DMRmmdvm connect packet from KC1AWV  B at 45.32.193.119
Oct  3 12:24:18 xlx740 xlxd: DMRmmdvm authentication packet from KC1AWV  B at 45.32.193.119
Oct  3 12:24:18 xlx740 xlxd: DMRmmdvm login from KC1AWV  B at 45.32.193.119
Oct  3 12:24:18 xlx740 xlxd: New client KC1AWV  B at 45.32.193.119 added with protocol DMRMmdvm
Oct  3 12:24:18 xlx740 xlxd: DMRmmdvm configuration packet from KC1AWV  B at 45.32.193.119
Oct  3 12:24:18 xlx740 xlxd: DMRmmdvm options packet from KC1AWV  B at 45.32.193.119


--- MB log ---
root@test:/opt/MMDVM_Bridge_2# ./MMDVM_Bridge MMDVM_Bridge.ini
I: 2019-10-03 16:24:08.319 MMDVM_Bridge:
I: 2019-10-03 16:24:08.319 Portions Copyright (C) 2018 DVSwitch, INAD.
I: 2019-10-03 16:24:08.319 Hacks by Mike N4IRR and Steve N4IRS
I: 2019-10-03 16:24:08.319 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
I: 2019-10-03 16:24:08.319 This software is for use on amateur radio networks only,
I: 2019-10-03 16:24:08.319 it is to be used for educational purposes only. Its use on
I: 2019-10-03 16:24:08.319 commercial networks is strictly prohibited.
I: 2019-10-03 16:24:08.319 Copyright(C) 2015-2018 by Jonathan Naylor, G4KLX and others
M: 2019-10-03 16:24:08.319 MMDVM_Bridge-20180423 is starting
M: 2019-10-03 16:24:08.319 Built 10:47:32 Jun 24 2019 (GitID #30648ec)
I: 2019-10-03 16:24:08.319 General Parameters
I: 2019-10-03 16:24:08.319     Callsign: KC1AWV
I: 2019-10-03 16:24:08.319     Id: 3122790
I: 2019-10-03 16:24:08.319     Duplex: no
I: 2019-10-03 16:24:08.320     Timeout: 180s
I: 2019-10-03 16:24:08.320     D-Star: disabled
I: 2019-10-03 16:24:08.320     DMR: enabled
I: 2019-10-03 16:24:08.320     YSF: disabled
I: 2019-10-03 16:24:08.320     P25: disabled
I: 2019-10-03 16:24:08.320     NXDN: disabled
I: 2019-10-03 16:24:08.320 Modem Parameters
I: 2019-10-03 16:24:08.320     Port: /dev/null
I: 2019-10-03 16:24:08.320     RX Invert: no
I: 2019-10-03 16:24:08.320     TX Invert: no
I: 2019-10-03 16:24:08.320     PTT Invert: no
I: 2019-10-03 16:24:08.320     TX Delay: 100ms
I: 2019-10-03 16:24:08.320     RX Offset: 0Hz
I: 2019-10-03 16:24:08.320     TX Offset: 0Hz
I: 2019-10-03 16:24:08.320     RX DC Offset: 0
I: 2019-10-03 16:24:08.320     TX DC Offset: 0
I: 2019-10-03 16:24:08.320     RF Level: 100.0%
I: 2019-10-03 16:24:08.320     DMR Delay: 0 (0.0ms)
I: 2019-10-03 16:24:08.320     RX Level: 50.0%
I: 2019-10-03 16:24:08.320     CW Id TX Level: 50.0%
I: 2019-10-03 16:24:08.320     D-Star TX Level: 50.0%
I: 2019-10-03 16:24:08.320     DMR TX Level: 50.0%
I: 2019-10-03 16:24:08.320     YSF TX Level: 50.0%
I: 2019-10-03 16:24:08.320     P25 TX Level: 50.0%
I: 2019-10-03 16:24:08.320     NXDN TX Level: 50.0%
I: 2019-10-03 16:24:08.320     RX Frequency: 0Hz (0Hz)
I: 2019-10-03 16:24:08.321     TX Frequency: 0Hz (0Hz)
M: 2019-10-03 16:24:08.321 Opening the MMDVM
I: 2019-10-03 16:24:08.321 Display Parameters
I: 2019-10-03 16:24:08.321     Type:
I: 2019-10-03 16:24:08.321 DMR Network Parameters
I: 2019-10-03 16:24:08.321     Address: 173.208.200.180
I: 2019-10-03 16:24:08.321     Port: 62030
I: 2019-10-03 16:24:08.321     Local: 62331
I: 2019-10-03 16:24:08.321     Jitter: 360ms
I: 2019-10-03 16:24:08.321     Slot 1: enabled
I: 2019-10-03 16:24:08.321     Slot 2: enabled
I: 2019-10-03 16:24:08.321     Mode Hang: 3s
I: 2019-10-03 16:24:08.321     Options: XLX:4009
I: 2019-10-03 16:24:08.321 Info Parameters
I: 2019-10-03 16:24:08.321     Callsign: KC1AWV
I: 2019-10-03 16:24:08.321     RX Frequency: 0Hz
I: 2019-10-03 16:24:08.321     TX Frequency: 0Hz
I: 2019-10-03 16:24:08.321     Power: 1W
I: 2019-10-03 16:24:08.321     Latitude: 41.733299deg N
I: 2019-10-03 16:24:08.321     Longitude: -50.399899deg E
I: 2019-10-03 16:24:08.321     Height: 0m
I: 2019-10-03 16:24:08.321     Location: "Test Bridge"
I: 2019-10-03 16:24:08.321     Description: "MMDVM_Bridge"
I: 2019-10-03 16:24:08.321     URL: "https://www.erdn.net"
M: 2019-10-03 16:24:08.321 DMR, Opening DMR Network
I: 2019-10-03 16:24:08.321 RSSI
I: 2019-10-03 16:24:08.322     Mapping File: RSSI.dat
W: 2019-10-03 16:24:08.322 Cannot open the RSSI data file - RSSI.dat
I: 2019-10-03 16:24:08.322 DMR Id Lookups
I: 2019-10-03 16:24:08.322     File: /var/lib/mmdvm/DMRIds.dat
I: 2019-10-03 16:24:08.322     Reload: 24 hours
I: 2019-10-03 16:24:08.425 Loaded 145176 Ids to the DMR callsign lookup table
I: 2019-10-03 16:24:08.425 DMR RF Parameters
I: 2019-10-03 16:24:08.425     Id: 3122790
I: 2019-10-03 16:24:08.425     Color Code: 1
I: 2019-10-03 16:24:08.425     Self Only: no
I: 2019-10-03 16:24:08.425     Embedded LC Only: yes
I: 2019-10-03 16:24:08.425     Dump Talker Alias Data: no
I: 2019-10-03 16:24:08.425     Prefixes: 0
I: 2019-10-03 16:24:08.425     Call Hang: 3s
I: 2019-10-03 16:24:08.425     TX Hang: 3s
I: 2019-10-03 16:24:08.425     Mode Hang: 10s
M: 2019-10-03 16:24:08.426 DMR, Opening INI file: DVSwitch.ini
M: 2019-10-03 16:24:08.426 DMR, Setting [DMR] Address -> 127.0.0.1
M: 2019-10-03 16:24:08.426 DMR, Setting [DMR] TXPort -> 33100
M: 2019-10-03 16:24:08.426 DMR, Setting [DMR] RXPort -> 33103
M: 2019-10-03 16:24:08.426 DMR, Setting [DMR] Slot -> 2
M: 2019-10-03 16:24:08.426 DMR, Transmitting on 127.0.0.1:33100 and listening on port 33103.  Result = 1
M: 2019-10-03 16:24:08.426 MMDVM_Bridge-20180423 is running
I: 2019-10-03 16:24:08.426 Started the DMR Id lookup reload thread
D: 2019-10-03 16:24:18.443 DMR, Sending authorisation
D: 2019-10-03 16:24:18.459 DMR, Sending configuration
D: 2019-10-03 16:24:18.474 DMR, Sending options
M: 2019-10-03 16:24:18.489 DMR, Logged into the master successfully

On Thu, Oct 3, 2019 at 12:11 PM Mike Zingman - N4IRR <mike.zingman@...> wrote:
Correct syntax for MB is

Options
=XLX:4009


--
Steve Miller
KC1AWV


Re: user blocked

Roland W9HPX
 

This is an older post, but it the same thing I am experiencing on the Carolina Link bridge between C4FM and BM TG 31374.  The answers to the post do not exactly apply to our configuration.  The Carolina Link bridge is a single instance of MMDVM_Bridge between YSFreflector #79602 and BM TG 31374.  I understand the User Blocked message is BM's automatic Loop Detection and blocks the TG for an hour before being lifted.  Here is a log excerpt from today where a user on a FT-2D keyed more than 5 times in a row for about a second, triggering the block.  This has occurred a few times over last month, but otherwise the bridge seems to work OK.  

M: 2019-10-03 14:52:38.712 Received data from BMF        to *****E5Itr at NC4CL    
M: 2019-10-03 14:52:40.114 Received end of transmission
M: 2019-10-03 14:52:43.110 Received data from BMF        to *****E5Itr at NC4CL    
M: 2019-10-03 14:52:44.013 Received end of transmission
M: 2019-10-03 14:52:50.817 Received data from BMF        to *****E5Itr at NC4CL    
M: 2019-10-03 14:52:52.413 Received end of transmission
M: 2019-10-03 14:53:02.226 Received data from BMF        to *****E5Itr at NC4CL    
M: 2019-10-03 14:53:03.628 Received end of transmission
M: 2019-10-03 14:53:11.170 Received data from BMF        to *****E5Itr at NC4CL    
M: 2019-10-03 14:53:12.572 Received end of transmission
M: 2019-10-03 14:53:15.971 Received data from BMF        to *****E5Itr at NC4CL    
M: 2019-10-03 14:53:16.873 Received end of transmission
M: 2019-10-03 14:53:18.715 Currently linked repeaters/gateways:
M: 2019-10-03 14:53:18.715     NC4CL     : 127.0.0.1:3200 3/60
M: 2019-10-03 14:53:18.715     KM4NMW    : 174.99.205.58:42000 3/60
M: 2019-10-03 14:53:18.715     AJ4RC     : 47.133.184.2:42000 0/60
M: 2019-10-03 14:53:18.715     KN4MGS    : 71.76.120.46:42000 0/60
M: 2019-10-03 14:53:18.715     K9VMY     : 67.184.245.24:1024 3/60
M: 2019-10-03 14:53:18.715     K4WSC     : 71.75.100.129:57352 4/60
M: 2019-10-03 14:53:18.715     NC4CL     : 208.104.55.181:22694 5/60
M: 2019-10-03 14:53:18.715     N8TA      : 71.194.103.93:44809 4/60
M: 2019-10-03 14:53:18.715     K2CPR     : 173.94.224.95:62831 3/60
M: 2019-10-03 14:53:18.715     AE9EE     : 69.245.172.148:42000 3/60
M: 2019-10-03 14:53:18.715     KD8AGO    : 72.11.7.43:49418 4/60
M: 2019-10-03 14:53:18.715     K4WSC     : 71.75.100.129:49554 4/60
M: 2019-10-03 14:53:18.715     KN4HND    : 174.80.206.103:42000 1/60
M: 2019-10-03 14:53:18.715     KD8AGO    : 72.11.7.43:63146 2/60
M: 2019-10-03 14:53:18.715     AE4BT     : 96.33.4.193:42000 1/60
M: 2019-10-03 14:53:18.715     KI4BWS    : 75.89.69.22:42000 1/60
M: 2019-10-03 14:53:20.149 Received data from      31374 to        ALL at NC4CL    
M: 2019-10-03 14:53:21.221 Received end of transmission
M: 2019-10-03 14:53:51.687 Received data from BMF        to *****E5Itr at NC4CL    
M: 2019-10-03 14:53:53.089 Received end of transmission
M: 2019-10-03 14:53:56.385 Received data from      31374 to        ALL at NC4CL    
M: 2019-10-03 14:53:57.466 Received end of transmission
M: 2019-10-03 14:55:18.727 Currently linked repeaters/gateways:
M: 2019-10-03 14:55:18.727     NC4CL     : 127.0.0.1:3200 3/60
M: 2019-10-03 14:55:18.727     KM4NMW    : 174.99.205.58:42000 3/60
M: 2019-10-03 14:55:18.728     AJ4RC     : 47.133.184.2:42000 0/60
M: 2019-10-03 14:55:18.728     KN4MGS    : 71.76.120.46:42000 0/60
M: 2019-10-03 14:55:18.728     K9VMY     : 67.184.245.24:1024 2/60
M: 2019-10-03 14:55:18.728     K4WSC     : 71.75.100.129:57352 4/60
M: 2019-10-03 14:55:18.728     NC4CL     : 208.104.55.181:22694 1/60
M: 2019-10-03 14:55:18.728     N8TA      : 71.194.103.93:44809 4/60
M: 2019-10-03 14:55:18.728     K2CPR     : 173.94.224.95:62831 3/60
M: 2019-10-03 14:55:18.728     AE9EE     : 69.245.172.148:42000 3/60
M: 2019-10-03 14:55:18.728     KD8AGO    : 72.11.7.43:49418 4/60
M: 2019-10-03 14:55:18.728     K4WSC     : 71.75.100.129:49554 3/60
M: 2019-10-03 14:55:18.728     KN4HND    : 174.80.206.103:42000 0/60
M: 2019-10-03 14:55:18.728     KD8AGO    : 72.11.7.43:63146 2/60
M: 2019-10-03 14:55:18.728     AE4BT     : 96.33.4.193:42000 1/60
M: 2019-10-03 14:55:18.728     KI4BWS    : 75.89.69.22:42000 11/60
M: 2019-10-03 14:56:38.706 Received data from BMF        to *****E5Itr at NC4CL    
M: 2019-10-03 14:56:40.108 Received end of transmission
M: 2019-10-03 14:56:43.367 Received data from      31374 to        ALL at NC4CL    
M: 2019-10-03 14:56:44.443 Received end of transmission

As can be seen, the user does not have a proper callsign entered into his radio.  What can be done to fix this somewhat infrequent blocking occurrence?

73, Roland Kraatz W9HPX
Manager for the NC4CL Carolina Link Bridge


Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge

Steve KC1AWV
 

Testing now, but no connect to module with MB. I'm including the HBL log lines for comparison as well. Version issue? Maybe my MB is older...

--- HBlink connect to XLX ---
Oct  3 12:23:56 xlx740 xlxd: DMRmmdvm connect packet from KC1AWV  B at 45.32.193.119
Oct  3 12:23:56 xlx740 xlxd: DMRmmdvm authentication packet from KC1AWV  B at 45.32.193.119
Oct  3 12:23:56 xlx740 xlxd: DMRmmdvm login from KC1AWV  B at 45.32.193.119
Oct  3 12:23:56 xlx740 xlxd: New client KC1AWV  B at 45.32.193.119 added with protocol DMRMmdvm
Oct  3 12:23:56 xlx740 xlxd: DMRmmdvm configuration packet from KC1AWV  B at 45.32.193.119
Oct  3 12:23:56 xlx740 xlxd: DMRmmdvm client KC1AWV  B linking on module H

--- MB connect to XLX ---
Oct  3 12:24:18 xlx740 xlxd: DMRmmdvm connect packet from KC1AWV  B at 45.32.193.119
Oct  3 12:24:18 xlx740 xlxd: DMRmmdvm authentication packet from KC1AWV  B at 45.32.193.119
Oct  3 12:24:18 xlx740 xlxd: DMRmmdvm login from KC1AWV  B at 45.32.193.119
Oct  3 12:24:18 xlx740 xlxd: New client KC1AWV  B at 45.32.193.119 added with protocol DMRMmdvm
Oct  3 12:24:18 xlx740 xlxd: DMRmmdvm configuration packet from KC1AWV  B at 45.32.193.119
Oct  3 12:24:18 xlx740 xlxd: DMRmmdvm options packet from KC1AWV  B at 45.32.193.119


--- MB log ---
root@test:/opt/MMDVM_Bridge_2# ./MMDVM_Bridge MMDVM_Bridge.ini
I: 2019-10-03 16:24:08.319 MMDVM_Bridge:
I: 2019-10-03 16:24:08.319 Portions Copyright (C) 2018 DVSwitch, INAD.
I: 2019-10-03 16:24:08.319 Hacks by Mike N4IRR and Steve N4IRS
I: 2019-10-03 16:24:08.319 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
I: 2019-10-03 16:24:08.319 This software is for use on amateur radio networks only,
I: 2019-10-03 16:24:08.319 it is to be used for educational purposes only. Its use on
I: 2019-10-03 16:24:08.319 commercial networks is strictly prohibited.
I: 2019-10-03 16:24:08.319 Copyright(C) 2015-2018 by Jonathan Naylor, G4KLX and others
M: 2019-10-03 16:24:08.319 MMDVM_Bridge-20180423 is starting
M: 2019-10-03 16:24:08.319 Built 10:47:32 Jun 24 2019 (GitID #30648ec)
I: 2019-10-03 16:24:08.319 General Parameters
I: 2019-10-03 16:24:08.319     Callsign: KC1AWV
I: 2019-10-03 16:24:08.319     Id: 3122790
I: 2019-10-03 16:24:08.319     Duplex: no
I: 2019-10-03 16:24:08.320     Timeout: 180s
I: 2019-10-03 16:24:08.320     D-Star: disabled
I: 2019-10-03 16:24:08.320     DMR: enabled
I: 2019-10-03 16:24:08.320     YSF: disabled
I: 2019-10-03 16:24:08.320     P25: disabled
I: 2019-10-03 16:24:08.320     NXDN: disabled
I: 2019-10-03 16:24:08.320 Modem Parameters
I: 2019-10-03 16:24:08.320     Port: /dev/null
I: 2019-10-03 16:24:08.320     RX Invert: no
I: 2019-10-03 16:24:08.320     TX Invert: no
I: 2019-10-03 16:24:08.320     PTT Invert: no
I: 2019-10-03 16:24:08.320     TX Delay: 100ms
I: 2019-10-03 16:24:08.320     RX Offset: 0Hz
I: 2019-10-03 16:24:08.320     TX Offset: 0Hz
I: 2019-10-03 16:24:08.320     RX DC Offset: 0
I: 2019-10-03 16:24:08.320     TX DC Offset: 0
I: 2019-10-03 16:24:08.320     RF Level: 100.0%
I: 2019-10-03 16:24:08.320     DMR Delay: 0 (0.0ms)
I: 2019-10-03 16:24:08.320     RX Level: 50.0%
I: 2019-10-03 16:24:08.320     CW Id TX Level: 50.0%
I: 2019-10-03 16:24:08.320     D-Star TX Level: 50.0%
I: 2019-10-03 16:24:08.320     DMR TX Level: 50.0%
I: 2019-10-03 16:24:08.320     YSF TX Level: 50.0%
I: 2019-10-03 16:24:08.320     P25 TX Level: 50.0%
I: 2019-10-03 16:24:08.320     NXDN TX Level: 50.0%
I: 2019-10-03 16:24:08.320     RX Frequency: 0Hz (0Hz)
I: 2019-10-03 16:24:08.321     TX Frequency: 0Hz (0Hz)
M: 2019-10-03 16:24:08.321 Opening the MMDVM
I: 2019-10-03 16:24:08.321 Display Parameters
I: 2019-10-03 16:24:08.321     Type:
I: 2019-10-03 16:24:08.321 DMR Network Parameters
I: 2019-10-03 16:24:08.321     Address: 173.208.200.180
I: 2019-10-03 16:24:08.321     Port: 62030
I: 2019-10-03 16:24:08.321     Local: 62331
I: 2019-10-03 16:24:08.321     Jitter: 360ms
I: 2019-10-03 16:24:08.321     Slot 1: enabled
I: 2019-10-03 16:24:08.321     Slot 2: enabled
I: 2019-10-03 16:24:08.321     Mode Hang: 3s
I: 2019-10-03 16:24:08.321     Options: XLX:4009
I: 2019-10-03 16:24:08.321 Info Parameters
I: 2019-10-03 16:24:08.321     Callsign: KC1AWV
I: 2019-10-03 16:24:08.321     RX Frequency: 0Hz
I: 2019-10-03 16:24:08.321     TX Frequency: 0Hz
I: 2019-10-03 16:24:08.321     Power: 1W
I: 2019-10-03 16:24:08.321     Latitude: 41.733299deg N
I: 2019-10-03 16:24:08.321     Longitude: -50.399899deg E
I: 2019-10-03 16:24:08.321     Height: 0m
I: 2019-10-03 16:24:08.321     Location: "Test Bridge"
I: 2019-10-03 16:24:08.321     Description: "MMDVM_Bridge"
I: 2019-10-03 16:24:08.321     URL: "https://www.erdn.net"
M: 2019-10-03 16:24:08.321 DMR, Opening DMR Network
I: 2019-10-03 16:24:08.321 RSSI
I: 2019-10-03 16:24:08.322     Mapping File: RSSI.dat
W: 2019-10-03 16:24:08.322 Cannot open the RSSI data file - RSSI.dat
I: 2019-10-03 16:24:08.322 DMR Id Lookups
I: 2019-10-03 16:24:08.322     File: /var/lib/mmdvm/DMRIds.dat
I: 2019-10-03 16:24:08.322     Reload: 24 hours
I: 2019-10-03 16:24:08.425 Loaded 145176 Ids to the DMR callsign lookup table
I: 2019-10-03 16:24:08.425 DMR RF Parameters
I: 2019-10-03 16:24:08.425     Id: 3122790
I: 2019-10-03 16:24:08.425     Color Code: 1
I: 2019-10-03 16:24:08.425     Self Only: no
I: 2019-10-03 16:24:08.425     Embedded LC Only: yes
I: 2019-10-03 16:24:08.425     Dump Talker Alias Data: no
I: 2019-10-03 16:24:08.425     Prefixes: 0
I: 2019-10-03 16:24:08.425     Call Hang: 3s
I: 2019-10-03 16:24:08.425     TX Hang: 3s
I: 2019-10-03 16:24:08.425     Mode Hang: 10s
M: 2019-10-03 16:24:08.426 DMR, Opening INI file: DVSwitch.ini
M: 2019-10-03 16:24:08.426 DMR, Setting [DMR] Address -> 127.0.0.1
M: 2019-10-03 16:24:08.426 DMR, Setting [DMR] TXPort -> 33100
M: 2019-10-03 16:24:08.426 DMR, Setting [DMR] RXPort -> 33103
M: 2019-10-03 16:24:08.426 DMR, Setting [DMR] Slot -> 2
M: 2019-10-03 16:24:08.426 DMR, Transmitting on 127.0.0.1:33100 and listening on port 33103.  Result = 1
M: 2019-10-03 16:24:08.426 MMDVM_Bridge-20180423 is running
I: 2019-10-03 16:24:08.426 Started the DMR Id lookup reload thread
D: 2019-10-03 16:24:18.443 DMR, Sending authorisation
D: 2019-10-03 16:24:18.459 DMR, Sending configuration
D: 2019-10-03 16:24:18.474 DMR, Sending options
M: 2019-10-03 16:24:18.489 DMR, Logged into the master successfully

On Thu, Oct 3, 2019 at 12:11 PM Mike Zingman - N4IRR <mike.zingman@...> wrote:
Correct syntax for MB is

Options
=XLX:4009



--
Steve Miller
KC1AWV


Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge

Steve N4IRS
 

On 10/3/2019 12:11 PM, Mike Zingman - N4IRR wrote:
Correct syntax for MB is

Options
=XLX:4009


Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge

Mike Zingman - N4IRR
 

Correct syntax for MB is

Options
=XLX:4009


Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge

SP2ONG Waldek
 

Hi

On Wed, Oct 2, 2019 at 12:35 PM, Steve KC1AWV wrote:
Options=StartRef=4004
But if I understood from your previous posts now the option StarRef = 4004 does not work in MMDVM_Bridge to transfer for example to module D ???


Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge

Steve KC1AWV
 

Not with that configuration, the one you pasted is for DMRGateway. This is what I used for MB:

[DMR Network]
Enable=1
Address=[ip address of xlx server]
Port=62030
Jitter=360
Local=62031
Password=passw0rd
Options=StartRef=4004
Slot1=1
Slot2=1
Debug=1

On Wed, Oct 2, 2019 at 3:16 PM Waldek SP2ONG <sp2ong@...> wrote:
Steve KC1AWV

Did you try connect to XLX and slected Modlue via MMDVM_Bridge with your example  ?

[XLX Network]

Enabled=1

File=/var/lib/mmdvm/XLXHosts.txt

Port=62030

Password=passw0rd

ReloadTime=60

# Local=3351

Slot=1

TG=6

Base=64000

Startup=123

Relink=10

Debug=0

Module=D



--
Steve Miller
KC1AWV


Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge

SP2ONG Waldek
 

Steve KC1AWV

Did you try connect to XLX and slected Modlue via MMDVM_Bridge with your example  ?

[XLX Network]

Enabled=1

File=/var/lib/mmdvm/XLXHosts.txt

Port=62030

Password=passw0rd

ReloadTime=60

# Local=3351

Slot=1

TG=6

Base=64000

Startup=123

Relink=10

Debug=0

Module=D


Re: Image for Raspberry pi3 with Debian 10 Buster with DVSWICTH SERVER, HBLINK3 AND HBMONITOR.

 

lol thanks Steve, that was it!!

I saw my mistake after i sent the email.



On Wed, Oct 2, 2019 at 2:01 PM Steve KC1AWV <smiller@...> wrote:
Try en_US

On Wed, Oct 2, 2019 at 3:00 PM Russell, KV4S <russelljthomas@...> wrote:
well i did something wrong now i have no voice feedback....

What does the Language need to be set to for English?

On Wed, Oct 2, 2019 at 1:52 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
I may have found where to set the language for NXDN and P25:

Language=es_ES
change to
Language=es_US

sudo find / -name "P25Gateway.ini"
find: ‘/run/user/1000/gvfs’: Permission denied
/opt/P25Clients/P25Gateway/P25Gateway.ini


pi@dvswicth:/opt/NXDNClients/NXDNGateway $ sudo nano NXDNGateway.ini
pi@dvswicth:/opt/NXDNClients/NXDNGateway $ cd /opt/P25Clients/P25Gateway/
pi@dvswicth:/opt/P25Clients/P25Gateway $ sudo nano P25Gateway.ini

On Wed, Oct 2, 2019 at 1:14 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:

Adrian, Thank you! It had a KV4S C on the D-Plus screen. when I set it to just KV4S Saved and rebooted REFs started working for me on transmit!!


Joaquin, thanks for your note to Denny I was also able to set the ircDBBGateway to english in the Misc tab so, DStar responses are in English now!
To accomplish this use VNC Viewer to see the desktop then run this in a terminal window 
sudo ircddbgatewayconfig  
it took about 3-4 minutes for this to come up for me.
it wouldn't let me do it from an ssh window remotely.

I'm assuming there is something similar for the P25 & NXDN gateways on how to set the location/language. Are either of you able to point me in the right direction for that?

On Wed, Oct 2, 2019 at 3:01 AM Adrian Fewster <vk4tux@...> wrote:



On 2/10/19 11:20 am, Russell, KV4S wrote:
i registered a C terminal today, not sure if it takes time to propagate?
I noticed the mmdvm had the module set to C.
The module settings are irrelevant to dplus login, which is just your mycall .

Also, I have 2 DMR ids not sure if that matters. I tried on both and neither seem to work.
DMR id's also irrelevant to D-Star dplus login.

I don't see an ircdbb gateway folder on this image, any idea where it is or maybe he's using something else?

Usually it is in /etc/ircddbgateway if it is run as root, or otherwise in the home folder of your user, which may also be symlinked to /etc/ircddbgateway


example find ;

;

odroid@odroid-jessie:~$ sudo find / -name "ircddbgateway"

/usr/share/ircddbgateway

/usr/bin/ircddbgateway

/etc/ircddbgateway                                                                                                             <<<< config

/home/odroid/ircddbgateway                                                                                              <<<< config

odroid@odroid-jessie:~$

with gui ircddbgatewayconfig look here ;





On Tue, Oct 1, 2019 at 6:01 PM Adrian Fewster <vk4tux@...> wrote:

What is the dplus login call in ircddbgateway      ?

Your call shows (USTRUST)

[KV4S    ] [K4DSO  B]
[KV4S   B] [KV4S   B]

registered terminals, so those should work in dplus. Seems like a dplus auth issue.

Adrian ... vk4tux


On 2/10/19 7:02 am, Russell, KV4S wrote:
Joaquin,

I'm running your 2.0 image today. Very well done and easy to work with!
I need some D-star help.
on the REF reflectors i'm hearing traffic but my audio is not going over the reflector?
are there any logs i can look at to see what's going on? I've attached my analog and mmdvm logs but they look ok. maybe there is an ambe log or dstar specific log i can looking for?
I've tried some XRF reflectors and transmit appears to work fine over there. seems to be limited to REF.

On Mon, Sep 30, 2019 at 11:14 AM EA5GVK Joaquin <ea5gvk@...> wrote:
New Version 2.0 Image DVSwitch Server  ( format .img microsd 16gb).
English and Spanish Version
https://mega.nz/#!mwYREKia!AF6MPV3g3223dA1CPPc00HttVTAIjTDgTqzm4W3RHwE

English manual
https://mega.nz/#!uoBzBYBD!F9qFqZecQ_fQCrUzXqngSbGS1xoNQR0fEpbughtj1r4

More Info: http://ea5gvk-dmr.zigor.es/2019/09/30/nueva-version-2-0-imagen-server-dvswitch-actualizable-y-server-hblink/



--
Steve Miller
KC1AWV


Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge

Steve N4IRS
 

I could have sworn we tested this. I will look when I get a chance. My time is very limited because:
1: I am moving after 22 years to a temporary apartment. (Until the new house is ready)
2: I am replacing 2 fiber switches in my SAN
3: I am upgrading enterprise to O365. (upgrade?)



On 10/2/2019 2:58 PM, Steve KC1AWV wrote:
Sorry Steve, I can feel the frustration. I have tested with the Options line, and nothing happens on the XLX side.

root@test:/opt/MMDVM_Bridge_2# ./MMDVM_Bridge MMDVM_Bridge.ini
I: 2019-10-02 18:50:28.154 MMDVM_Bridge:
I: 2019-10-02 18:50:28.155 Portions Copyright (C) 2018 DVSwitch, INAD.
I: 2019-10-02 18:50:28.155 Hacks by Mike N4IRR and Steve N4IRS
I: 2019-10-02 18:50:28.155 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
I: 2019-10-02 18:50:28.155 This software is for use on amateur radio networks only,
I: 2019-10-02 18:50:28.155 it is to be used for educational purposes only. Its use on
I: 2019-10-02 18:50:28.155 commercial networks is strictly prohibited.
I: 2019-10-02 18:50:28.155 Copyright(C) 2015-2018 by Jonathan Naylor, G4KLX and others
M: 2019-10-02 18:50:28.155 MMDVM_Bridge-20180423 is starting
M: 2019-10-02 18:50:28.155 Built 10:47:32 Jun 24 2019 (GitID #30648ec)
I: 2019-10-02 18:50:28.155 General Parameters
I: 2019-10-02 18:50:28.155     Callsign: KC1AWV
I: 2019-10-02 18:50:28.155     Id: 3122790
I: 2019-10-02 18:50:28.155     Duplex: no
I: 2019-10-02 18:50:28.155     Timeout: 180s
I: 2019-10-02 18:50:28.155     D-Star: disabled
I: 2019-10-02 18:50:28.155     DMR: enabled
I: 2019-10-02 18:50:28.155     YSF: disabled
I: 2019-10-02 18:50:28.155     P25: disabled
I: 2019-10-02 18:50:28.155     NXDN: disabled
I: 2019-10-02 18:50:28.155 Modem Parameters
I: 2019-10-02 18:50:28.155     Port: /dev/null
I: 2019-10-02 18:50:28.156     RX Invert: no
I: 2019-10-02 18:50:28.156     TX Invert: no
I: 2019-10-02 18:50:28.156     PTT Invert: no
I: 2019-10-02 18:50:28.156     TX Delay: 100ms
I: 2019-10-02 18:50:28.156     RX Offset: 0Hz
I: 2019-10-02 18:50:28.156     TX Offset: 0Hz
I: 2019-10-02 18:50:28.156     RX DC Offset: 0
I: 2019-10-02 18:50:28.156     TX DC Offset: 0
I: 2019-10-02 18:50:28.156     RF Level: 100.0%
I: 2019-10-02 18:50:28.156     DMR Delay: 0 (0.0ms)
I: 2019-10-02 18:50:28.156     RX Level: 50.0%
I: 2019-10-02 18:50:28.156     CW Id TX Level: 50.0%
I: 2019-10-02 18:50:28.156     D-Star TX Level: 50.0%
I: 2019-10-02 18:50:28.156     DMR TX Level: 50.0%
I: 2019-10-02 18:50:28.156     YSF TX Level: 50.0%
I: 2019-10-02 18:50:28.156     P25 TX Level: 50.0%
I: 2019-10-02 18:50:28.156     NXDN TX Level: 50.0%
I: 2019-10-02 18:50:28.156     RX Frequency: 0Hz (0Hz)
I: 2019-10-02 18:50:28.156     TX Frequency: 0Hz (0Hz)
M: 2019-10-02 18:50:28.156 Opening the MMDVM
I: 2019-10-02 18:50:28.156 Display Parameters
I: 2019-10-02 18:50:28.156     Type:
I: 2019-10-02 18:50:28.156 DMR Network Parameters
I: 2019-10-02 18:50:28.156     Address: 173.208.200.180
I: 2019-10-02 18:50:28.156     Port: 62030
I: 2019-10-02 18:50:28.156     Local: 62331
I: 2019-10-02 18:50:28.157     Jitter: 360ms
I: 2019-10-02 18:50:28.157     Slot 1: enabled
I: 2019-10-02 18:50:28.157     Slot 2: enabled
I: 2019-10-02 18:50:28.157     Mode Hang: 3s
I: 2019-10-02 18:50:28.157     Options: StartRef=4004
I: 2019-10-02 18:50:28.157 Info Parameters
I: 2019-10-02 18:50:28.157     Callsign: KC1AWV
I: 2019-10-02 18:50:28.157     RX Frequency: 0Hz
I: 2019-10-02 18:50:28.157     TX Frequency: 0Hz
I: 2019-10-02 18:50:28.157     Power: 1W
I: 2019-10-02 18:50:28.157     Latitude: 41.733299deg N
I: 2019-10-02 18:50:28.157     Longitude: -50.399899deg E
I: 2019-10-02 18:50:28.157     Height: 0m
I: 2019-10-02 18:50:28.157     Location: "Test Bridge"
I: 2019-10-02 18:50:28.157     Description: "MMDVM_Bridge"
I: 2019-10-02 18:50:28.157     URL: "https://www.erdn.net"
M: 2019-10-02 18:50:28.157 DMR, Opening DMR Network
I: 2019-10-02 18:50:28.157 RSSI
I: 2019-10-02 18:50:28.157     Mapping File: RSSI.dat
W: 2019-10-02 18:50:28.157 Cannot open the RSSI data file - RSSI.dat
I: 2019-10-02 18:50:28.157 DMR Id Lookups
I: 2019-10-02 18:50:28.157     File: /var/lib/mmdvm/DMRIds.dat
I: 2019-10-02 18:50:28.157     Reload: 24 hours
I: 2019-10-02 18:50:28.259 Loaded 145028 Ids to the DMR callsign lookup table
I: 2019-10-02 18:50:28.259 DMR RF Parameters
I: 2019-10-02 18:50:28.259     Id: 3122790
I: 2019-10-02 18:50:28.259     Color Code: 1
I: 2019-10-02 18:50:28.259     Self Only: no
I: 2019-10-02 18:50:28.259     Embedded LC Only: yes
I: 2019-10-02 18:50:28.259     Dump Talker Alias Data: no
I: 2019-10-02 18:50:28.259     Prefixes: 0
I: 2019-10-02 18:50:28.259     Call Hang: 3s
I: 2019-10-02 18:50:28.259     TX Hang: 3s
I: 2019-10-02 18:50:28.259     Mode Hang: 10s
M: 2019-10-02 18:50:28.259 DMR, Opening INI file: DVSwitch.ini
M: 2019-10-02 18:50:28.260 DMR, Setting [DMR] Address -> 127.0.0.1
M: 2019-10-02 18:50:28.260 DMR, Setting [DMR] TXPort -> 33100
M: 2019-10-02 18:50:28.260 DMR, Setting [DMR] RXPort -> 33103
M: 2019-10-02 18:50:28.260 DMR, Setting [DMR] Slot -> 2
M: 2019-10-02 18:50:28.260 DMR, Transmitting on 127.0.0.1:33100 and listening on port 33103.  Result = 1
M: 2019-10-02 18:50:28.260 MMDVM_Bridge-20180423 is running
I: 2019-10-02 18:50:28.260 Started the DMR Id lookup reload thread
D: 2019-10-02 18:50:38.276 DMR, Sending authorisation
D: 2019-10-02 18:50:38.291 DMR, Sending configuration
D: 2019-10-02 18:50:38.306 DMR, Sending options
M: 2019-10-02 18:50:38.322 DMR, Logged into the master successfully

Once logged in, XLX does not move the client to the requested module.

I think the reason I am confused was that a few months ago, I switched to hblink - which can take a XLX module in the 4000s.

On Wed, Oct 2, 2019 at 2:36 PM Steve N4IRS <szingman@...> wrote:
Has anyone tried Options=StartRef=4004 in the [DMR Network] stanza?

On 10/2/2019 2:25 PM, Adrian Fewster wrote:

Yes that was my point with the test example question below, however XLX is mentioned on the

commit for some reason, being a bridge of course we don't need a choice of networks.

Hopefully some talented coder can do for MMDVM_BRIDGE  as was done for HBlink peers re XLX module option.



On 3/10/19 2:45 am, Waldek SP2ONG wrote:

> Options=StartRef=4004  << will this work with XLX from  MMDVM_BRIDGE dmr network config to link module D ? This would be great if it works, if not could it be enabled ?


The documnet:

https://github.com/DVSwitch/MMDVM_Bridge/blob/master/DOC/DMRplus_startup_options.md

it is for DMRPlus not for XLX Network





--
Steve Miller
KC1AWV


Re: Image for Raspberry pi3 with Debian 10 Buster with DVSWICTH SERVER, HBLINK3 AND HBMONITOR.

Steve KC1AWV
 

Try en_US

On Wed, Oct 2, 2019 at 3:00 PM Russell, KV4S <russelljthomas@...> wrote:
well i did something wrong now i have no voice feedback....

What does the Language need to be set to for English?

On Wed, Oct 2, 2019 at 1:52 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
I may have found where to set the language for NXDN and P25:

Language=es_ES
change to
Language=es_US

sudo find / -name "P25Gateway.ini"
find: ‘/run/user/1000/gvfs’: Permission denied
/opt/P25Clients/P25Gateway/P25Gateway.ini


pi@dvswicth:/opt/NXDNClients/NXDNGateway $ sudo nano NXDNGateway.ini
pi@dvswicth:/opt/NXDNClients/NXDNGateway $ cd /opt/P25Clients/P25Gateway/
pi@dvswicth:/opt/P25Clients/P25Gateway $ sudo nano P25Gateway.ini

On Wed, Oct 2, 2019 at 1:14 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:

Adrian, Thank you! It had a KV4S C on the D-Plus screen. when I set it to just KV4S Saved and rebooted REFs started working for me on transmit!!


Joaquin, thanks for your note to Denny I was also able to set the ircDBBGateway to english in the Misc tab so, DStar responses are in English now!
To accomplish this use VNC Viewer to see the desktop then run this in a terminal window 
sudo ircddbgatewayconfig  
it took about 3-4 minutes for this to come up for me.
it wouldn't let me do it from an ssh window remotely.

I'm assuming there is something similar for the P25 & NXDN gateways on how to set the location/language. Are either of you able to point me in the right direction for that?

On Wed, Oct 2, 2019 at 3:01 AM Adrian Fewster <vk4tux@...> wrote:



On 2/10/19 11:20 am, Russell, KV4S wrote:
i registered a C terminal today, not sure if it takes time to propagate?
I noticed the mmdvm had the module set to C.
The module settings are irrelevant to dplus login, which is just your mycall .

Also, I have 2 DMR ids not sure if that matters. I tried on both and neither seem to work.
DMR id's also irrelevant to D-Star dplus login.

I don't see an ircdbb gateway folder on this image, any idea where it is or maybe he's using something else?

Usually it is in /etc/ircddbgateway if it is run as root, or otherwise in the home folder of your user, which may also be symlinked to /etc/ircddbgateway


example find ;

;

odroid@odroid-jessie:~$ sudo find / -name "ircddbgateway"

/usr/share/ircddbgateway

/usr/bin/ircddbgateway

/etc/ircddbgateway                                                                                                             <<<< config

/home/odroid/ircddbgateway                                                                                              <<<< config

odroid@odroid-jessie:~$

with gui ircddbgatewayconfig look here ;





On Tue, Oct 1, 2019 at 6:01 PM Adrian Fewster <vk4tux@...> wrote:

What is the dplus login call in ircddbgateway      ?

Your call shows (USTRUST)

[KV4S    ] [K4DSO  B]
[KV4S   B] [KV4S   B]

registered terminals, so those should work in dplus. Seems like a dplus auth issue.

Adrian ... vk4tux


On 2/10/19 7:02 am, Russell, KV4S wrote:
Joaquin,

I'm running your 2.0 image today. Very well done and easy to work with!
I need some D-star help.
on the REF reflectors i'm hearing traffic but my audio is not going over the reflector?
are there any logs i can look at to see what's going on? I've attached my analog and mmdvm logs but they look ok. maybe there is an ambe log or dstar specific log i can looking for?
I've tried some XRF reflectors and transmit appears to work fine over there. seems to be limited to REF.

On Mon, Sep 30, 2019 at 11:14 AM EA5GVK Joaquin <ea5gvk@...> wrote:
New Version 2.0 Image DVSwitch Server  ( format .img microsd 16gb).
English and Spanish Version
https://mega.nz/#!mwYREKia!AF6MPV3g3223dA1CPPc00HttVTAIjTDgTqzm4W3RHwE

English manual
https://mega.nz/#!uoBzBYBD!F9qFqZecQ_fQCrUzXqngSbGS1xoNQR0fEpbughtj1r4

More Info: http://ea5gvk-dmr.zigor.es/2019/09/30/nueva-version-2-0-imagen-server-dvswitch-actualizable-y-server-hblink/



--
Steve Miller
KC1AWV


Re: Image for Raspberry pi3 with Debian 10 Buster with DVSWICTH SERVER, HBLINK3 AND HBMONITOR.

 

well i did something wrong now i have no voice feedback....

What does the Language need to be set to for English?

On Wed, Oct 2, 2019 at 1:52 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
I may have found where to set the language for NXDN and P25:

Language=es_ES
change to
Language=es_US

sudo find / -name "P25Gateway.ini"
find: ‘/run/user/1000/gvfs’: Permission denied
/opt/P25Clients/P25Gateway/P25Gateway.ini


pi@dvswicth:/opt/NXDNClients/NXDNGateway $ sudo nano NXDNGateway.ini
pi@dvswicth:/opt/NXDNClients/NXDNGateway $ cd /opt/P25Clients/P25Gateway/
pi@dvswicth:/opt/P25Clients/P25Gateway $ sudo nano P25Gateway.ini

On Wed, Oct 2, 2019 at 1:14 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:

Adrian, Thank you! It had a KV4S C on the D-Plus screen. when I set it to just KV4S Saved and rebooted REFs started working for me on transmit!!


Joaquin, thanks for your note to Denny I was also able to set the ircDBBGateway to english in the Misc tab so, DStar responses are in English now!
To accomplish this use VNC Viewer to see the desktop then run this in a terminal window 
sudo ircddbgatewayconfig  
it took about 3-4 minutes for this to come up for me.
it wouldn't let me do it from an ssh window remotely.

I'm assuming there is something similar for the P25 & NXDN gateways on how to set the location/language. Are either of you able to point me in the right direction for that?

On Wed, Oct 2, 2019 at 3:01 AM Adrian Fewster <vk4tux@...> wrote:



On 2/10/19 11:20 am, Russell, KV4S wrote:
i registered a C terminal today, not sure if it takes time to propagate?
I noticed the mmdvm had the module set to C.
The module settings are irrelevant to dplus login, which is just your mycall .

Also, I have 2 DMR ids not sure if that matters. I tried on both and neither seem to work.
DMR id's also irrelevant to D-Star dplus login.

I don't see an ircdbb gateway folder on this image, any idea where it is or maybe he's using something else?

Usually it is in /etc/ircddbgateway if it is run as root, or otherwise in the home folder of your user, which may also be symlinked to /etc/ircddbgateway


example find ;

;

odroid@odroid-jessie:~$ sudo find / -name "ircddbgateway"

/usr/share/ircddbgateway

/usr/bin/ircddbgateway

/etc/ircddbgateway                                                                                                             <<<< config

/home/odroid/ircddbgateway                                                                                              <<<< config

odroid@odroid-jessie:~$

with gui ircddbgatewayconfig look here ;





On Tue, Oct 1, 2019 at 6:01 PM Adrian Fewster <vk4tux@...> wrote:

What is the dplus login call in ircddbgateway      ?

Your call shows (USTRUST)

[KV4S    ] [K4DSO  B]
[KV4S   B] [KV4S   B]

registered terminals, so those should work in dplus. Seems like a dplus auth issue.

Adrian ... vk4tux


On 2/10/19 7:02 am, Russell, KV4S wrote:
Joaquin,

I'm running your 2.0 image today. Very well done and easy to work with!
I need some D-star help.
on the REF reflectors i'm hearing traffic but my audio is not going over the reflector?
are there any logs i can look at to see what's going on? I've attached my analog and mmdvm logs but they look ok. maybe there is an ambe log or dstar specific log i can looking for?
I've tried some XRF reflectors and transmit appears to work fine over there. seems to be limited to REF.

On Mon, Sep 30, 2019 at 11:14 AM EA5GVK Joaquin <ea5gvk@...> wrote:
New Version 2.0 Image DVSwitch Server  ( format .img microsd 16gb).
English and Spanish Version
https://mega.nz/#!mwYREKia!AF6MPV3g3223dA1CPPc00HttVTAIjTDgTqzm4W3RHwE

English manual
https://mega.nz/#!uoBzBYBD!F9qFqZecQ_fQCrUzXqngSbGS1xoNQR0fEpbughtj1r4

More Info: http://ea5gvk-dmr.zigor.es/2019/09/30/nueva-version-2-0-imagen-server-dvswitch-actualizable-y-server-hblink/


Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge

Steve KC1AWV
 

Sorry Steve, I can feel the frustration. I have tested with the Options line, and nothing happens on the XLX side.

root@test:/opt/MMDVM_Bridge_2# ./MMDVM_Bridge MMDVM_Bridge.ini
I: 2019-10-02 18:50:28.154 MMDVM_Bridge:
I: 2019-10-02 18:50:28.155 Portions Copyright (C) 2018 DVSwitch, INAD.
I: 2019-10-02 18:50:28.155 Hacks by Mike N4IRR and Steve N4IRS
I: 2019-10-02 18:50:28.155 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
I: 2019-10-02 18:50:28.155 This software is for use on amateur radio networks only,
I: 2019-10-02 18:50:28.155 it is to be used for educational purposes only. Its use on
I: 2019-10-02 18:50:28.155 commercial networks is strictly prohibited.
I: 2019-10-02 18:50:28.155 Copyright(C) 2015-2018 by Jonathan Naylor, G4KLX and others
M: 2019-10-02 18:50:28.155 MMDVM_Bridge-20180423 is starting
M: 2019-10-02 18:50:28.155 Built 10:47:32 Jun 24 2019 (GitID #30648ec)
I: 2019-10-02 18:50:28.155 General Parameters
I: 2019-10-02 18:50:28.155     Callsign: KC1AWV
I: 2019-10-02 18:50:28.155     Id: 3122790
I: 2019-10-02 18:50:28.155     Duplex: no
I: 2019-10-02 18:50:28.155     Timeout: 180s
I: 2019-10-02 18:50:28.155     D-Star: disabled
I: 2019-10-02 18:50:28.155     DMR: enabled
I: 2019-10-02 18:50:28.155     YSF: disabled
I: 2019-10-02 18:50:28.155     P25: disabled
I: 2019-10-02 18:50:28.155     NXDN: disabled
I: 2019-10-02 18:50:28.155 Modem Parameters
I: 2019-10-02 18:50:28.155     Port: /dev/null
I: 2019-10-02 18:50:28.156     RX Invert: no
I: 2019-10-02 18:50:28.156     TX Invert: no
I: 2019-10-02 18:50:28.156     PTT Invert: no
I: 2019-10-02 18:50:28.156     TX Delay: 100ms
I: 2019-10-02 18:50:28.156     RX Offset: 0Hz
I: 2019-10-02 18:50:28.156     TX Offset: 0Hz
I: 2019-10-02 18:50:28.156     RX DC Offset: 0
I: 2019-10-02 18:50:28.156     TX DC Offset: 0
I: 2019-10-02 18:50:28.156     RF Level: 100.0%
I: 2019-10-02 18:50:28.156     DMR Delay: 0 (0.0ms)
I: 2019-10-02 18:50:28.156     RX Level: 50.0%
I: 2019-10-02 18:50:28.156     CW Id TX Level: 50.0%
I: 2019-10-02 18:50:28.156     D-Star TX Level: 50.0%
I: 2019-10-02 18:50:28.156     DMR TX Level: 50.0%
I: 2019-10-02 18:50:28.156     YSF TX Level: 50.0%
I: 2019-10-02 18:50:28.156     P25 TX Level: 50.0%
I: 2019-10-02 18:50:28.156     NXDN TX Level: 50.0%
I: 2019-10-02 18:50:28.156     RX Frequency: 0Hz (0Hz)
I: 2019-10-02 18:50:28.156     TX Frequency: 0Hz (0Hz)
M: 2019-10-02 18:50:28.156 Opening the MMDVM
I: 2019-10-02 18:50:28.156 Display Parameters
I: 2019-10-02 18:50:28.156     Type:
I: 2019-10-02 18:50:28.156 DMR Network Parameters
I: 2019-10-02 18:50:28.156     Address: 173.208.200.180
I: 2019-10-02 18:50:28.156     Port: 62030
I: 2019-10-02 18:50:28.156     Local: 62331
I: 2019-10-02 18:50:28.157     Jitter: 360ms
I: 2019-10-02 18:50:28.157     Slot 1: enabled
I: 2019-10-02 18:50:28.157     Slot 2: enabled
I: 2019-10-02 18:50:28.157     Mode Hang: 3s
I: 2019-10-02 18:50:28.157     Options: StartRef=4004
I: 2019-10-02 18:50:28.157 Info Parameters
I: 2019-10-02 18:50:28.157     Callsign: KC1AWV
I: 2019-10-02 18:50:28.157     RX Frequency: 0Hz
I: 2019-10-02 18:50:28.157     TX Frequency: 0Hz
I: 2019-10-02 18:50:28.157     Power: 1W
I: 2019-10-02 18:50:28.157     Latitude: 41.733299deg N
I: 2019-10-02 18:50:28.157     Longitude: -50.399899deg E
I: 2019-10-02 18:50:28.157     Height: 0m
I: 2019-10-02 18:50:28.157     Location: "Test Bridge"
I: 2019-10-02 18:50:28.157     Description: "MMDVM_Bridge"
I: 2019-10-02 18:50:28.157     URL: "https://www.erdn.net"
M: 2019-10-02 18:50:28.157 DMR, Opening DMR Network
I: 2019-10-02 18:50:28.157 RSSI
I: 2019-10-02 18:50:28.157     Mapping File: RSSI.dat
W: 2019-10-02 18:50:28.157 Cannot open the RSSI data file - RSSI.dat
I: 2019-10-02 18:50:28.157 DMR Id Lookups
I: 2019-10-02 18:50:28.157     File: /var/lib/mmdvm/DMRIds.dat
I: 2019-10-02 18:50:28.157     Reload: 24 hours
I: 2019-10-02 18:50:28.259 Loaded 145028 Ids to the DMR callsign lookup table
I: 2019-10-02 18:50:28.259 DMR RF Parameters
I: 2019-10-02 18:50:28.259     Id: 3122790
I: 2019-10-02 18:50:28.259     Color Code: 1
I: 2019-10-02 18:50:28.259     Self Only: no
I: 2019-10-02 18:50:28.259     Embedded LC Only: yes
I: 2019-10-02 18:50:28.259     Dump Talker Alias Data: no
I: 2019-10-02 18:50:28.259     Prefixes: 0
I: 2019-10-02 18:50:28.259     Call Hang: 3s
I: 2019-10-02 18:50:28.259     TX Hang: 3s
I: 2019-10-02 18:50:28.259     Mode Hang: 10s
M: 2019-10-02 18:50:28.259 DMR, Opening INI file: DVSwitch.ini
M: 2019-10-02 18:50:28.260 DMR, Setting [DMR] Address -> 127.0.0.1
M: 2019-10-02 18:50:28.260 DMR, Setting [DMR] TXPort -> 33100
M: 2019-10-02 18:50:28.260 DMR, Setting [DMR] RXPort -> 33103
M: 2019-10-02 18:50:28.260 DMR, Setting [DMR] Slot -> 2
M: 2019-10-02 18:50:28.260 DMR, Transmitting on 127.0.0.1:33100 and listening on port 33103.  Result = 1
M: 2019-10-02 18:50:28.260 MMDVM_Bridge-20180423 is running
I: 2019-10-02 18:50:28.260 Started the DMR Id lookup reload thread
D: 2019-10-02 18:50:38.276 DMR, Sending authorisation
D: 2019-10-02 18:50:38.291 DMR, Sending configuration
D: 2019-10-02 18:50:38.306 DMR, Sending options
M: 2019-10-02 18:50:38.322 DMR, Logged into the master successfully

Once logged in, XLX does not move the client to the requested module.

I think the reason I am confused was that a few months ago, I switched to hblink - which can take a XLX module in the 4000s.

On Wed, Oct 2, 2019 at 2:36 PM Steve N4IRS <szingman@...> wrote:
Has anyone tried Options=StartRef=4004 in the [DMR Network] stanza?

On 10/2/2019 2:25 PM, Adrian Fewster wrote:

Yes that was my point with the test example question below, however XLX is mentioned on the

commit for some reason, being a bridge of course we don't need a choice of networks.

Hopefully some talented coder can do for MMDVM_BRIDGE  as was done for HBlink peers re XLX module option.



On 3/10/19 2:45 am, Waldek SP2ONG wrote:

> Options=StartRef=4004  << will this work with XLX from  MMDVM_BRIDGE dmr network config to link module D ? This would be great if it works, if not could it be enabled ?


The documnet:

https://github.com/DVSwitch/MMDVM_Bridge/blob/master/DOC/DMRplus_startup_options.md

it is for DMRPlus not for XLX Network





--
Steve Miller
KC1AWV


Re: Image for Raspberry pi3 with Debian 10 Buster with DVSWICTH SERVER, HBLINK3 AND HBMONITOR.

 

I may have found where to set the language for NXDN and P25:

Language=es_ES
change to
Language=es_US

sudo find / -name "P25Gateway.ini"
find: ‘/run/user/1000/gvfs’: Permission denied
/opt/P25Clients/P25Gateway/P25Gateway.ini


pi@dvswicth:/opt/NXDNClients/NXDNGateway $ sudo nano NXDNGateway.ini
pi@dvswicth:/opt/NXDNClients/NXDNGateway $ cd /opt/P25Clients/P25Gateway/
pi@dvswicth:/opt/P25Clients/P25Gateway $ sudo nano P25Gateway.ini


On Wed, Oct 2, 2019 at 1:14 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:

Adrian, Thank you! It had a KV4S C on the D-Plus screen. when I set it to just KV4S Saved and rebooted REFs started working for me on transmit!!


Joaquin, thanks for your note to Denny I was also able to set the ircDBBGateway to english in the Misc tab so, DStar responses are in English now!
To accomplish this use VNC Viewer to see the desktop then run this in a terminal window 
sudo ircddbgatewayconfig  
it took about 3-4 minutes for this to come up for me.
it wouldn't let me do it from an ssh window remotely.

I'm assuming there is something similar for the P25 & NXDN gateways on how to set the location/language. Are either of you able to point me in the right direction for that?

On Wed, Oct 2, 2019 at 3:01 AM Adrian Fewster <vk4tux@...> wrote:



On 2/10/19 11:20 am, Russell, KV4S wrote:
i registered a C terminal today, not sure if it takes time to propagate?
I noticed the mmdvm had the module set to C.
The module settings are irrelevant to dplus login, which is just your mycall .

Also, I have 2 DMR ids not sure if that matters. I tried on both and neither seem to work.
DMR id's also irrelevant to D-Star dplus login.

I don't see an ircdbb gateway folder on this image, any idea where it is or maybe he's using something else?

Usually it is in /etc/ircddbgateway if it is run as root, or otherwise in the home folder of your user, which may also be symlinked to /etc/ircddbgateway


example find ;

;

odroid@odroid-jessie:~$ sudo find / -name "ircddbgateway"

/usr/share/ircddbgateway

/usr/bin/ircddbgateway

/etc/ircddbgateway                                                                                                             <<<< config

/home/odroid/ircddbgateway                                                                                              <<<< config

odroid@odroid-jessie:~$

with gui ircddbgatewayconfig look here ;





On Tue, Oct 1, 2019 at 6:01 PM Adrian Fewster <vk4tux@...> wrote:

What is the dplus login call in ircddbgateway      ?

Your call shows (USTRUST)

[KV4S    ] [K4DSO  B]
[KV4S   B] [KV4S   B]

registered terminals, so those should work in dplus. Seems like a dplus auth issue.

Adrian ... vk4tux


On 2/10/19 7:02 am, Russell, KV4S wrote:
Joaquin,

I'm running your 2.0 image today. Very well done and easy to work with!
I need some D-star help.
on the REF reflectors i'm hearing traffic but my audio is not going over the reflector?
are there any logs i can look at to see what's going on? I've attached my analog and mmdvm logs but they look ok. maybe there is an ambe log or dstar specific log i can looking for?
I've tried some XRF reflectors and transmit appears to work fine over there. seems to be limited to REF.

On Mon, Sep 30, 2019 at 11:14 AM EA5GVK Joaquin <ea5gvk@...> wrote:
New Version 2.0 Image DVSwitch Server  ( format .img microsd 16gb).
English and Spanish Version
https://mega.nz/#!mwYREKia!AF6MPV3g3223dA1CPPc00HttVTAIjTDgTqzm4W3RHwE

English manual
https://mega.nz/#!uoBzBYBD!F9qFqZecQ_fQCrUzXqngSbGS1xoNQR0fEpbughtj1r4

More Info: http://ea5gvk-dmr.zigor.es/2019/09/30/nueva-version-2-0-imagen-server-dvswitch-actualizable-y-server-hblink/


Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge

Steve N4IRS
 

Has anyone tried Options=StartRef=4004 in the [DMR Network] stanza?

On 10/2/2019 2:25 PM, Adrian Fewster wrote:

Yes that was my point with the test example question below, however XLX is mentioned on the

commit for some reason, being a bridge of course we don't need a choice of networks.

Hopefully some talented coder can do for MMDVM_BRIDGE  as was done for HBlink peers re XLX module option.



On 3/10/19 2:45 am, Waldek SP2ONG wrote:

> Options=StartRef=4004  << will this work with XLX from  MMDVM_BRIDGE dmr network config to link module D ? This would be great if it works, if not could it be enabled ?


The documnet:

https://github.com/DVSwitch/MMDVM_Bridge/blob/master/DOC/DMRplus_startup_options.md

it is for DMRPlus not for XLX Network




Re: Image for Raspberry pi3 with Debian 10 Buster with DVSWICTH SERVER, HBLINK3 AND HBMONITOR.

 

Adrian, Thank you! It had a KV4S C on the D-Plus screen. when I set it to just KV4S Saved and rebooted REFs started working for me on transmit!!


Joaquin, thanks for your note to Denny I was also able to set the ircDBBGateway to english in the Misc tab so, DStar responses are in English now!
To accomplish this use VNC Viewer to see the desktop then run this in a terminal window 
sudo ircddbgatewayconfig  
it took about 3-4 minutes for this to come up for me.
it wouldn't let me do it from an ssh window remotely.

I'm assuming there is something similar for the P25 & NXDN gateways on how to set the location/language. Are either of you able to point me in the right direction for that?

On Wed, Oct 2, 2019 at 3:01 AM Adrian Fewster <vk4tux@...> wrote:



On 2/10/19 11:20 am, Russell, KV4S wrote:
i registered a C terminal today, not sure if it takes time to propagate?
I noticed the mmdvm had the module set to C.
The module settings are irrelevant to dplus login, which is just your mycall .

Also, I have 2 DMR ids not sure if that matters. I tried on both and neither seem to work.
DMR id's also irrelevant to D-Star dplus login.

I don't see an ircdbb gateway folder on this image, any idea where it is or maybe he's using something else?

Usually it is in /etc/ircddbgateway if it is run as root, or otherwise in the home folder of your user, which may also be symlinked to /etc/ircddbgateway


example find ;

;

odroid@odroid-jessie:~$ sudo find / -name "ircddbgateway"

/usr/share/ircddbgateway

/usr/bin/ircddbgateway

/etc/ircddbgateway                                                                                                             <<<< config

/home/odroid/ircddbgateway                                                                                              <<<< config

odroid@odroid-jessie:~$

with gui ircddbgatewayconfig look here ;





On Tue, Oct 1, 2019 at 6:01 PM Adrian Fewster <vk4tux@...> wrote:

What is the dplus login call in ircddbgateway      ?

Your call shows (USTRUST)

[KV4S    ] [K4DSO  B]
[KV4S   B] [KV4S   B]

registered terminals, so those should work in dplus. Seems like a dplus auth issue.

Adrian ... vk4tux


On 2/10/19 7:02 am, Russell, KV4S wrote:
Joaquin,

I'm running your 2.0 image today. Very well done and easy to work with!
I need some D-star help.
on the REF reflectors i'm hearing traffic but my audio is not going over the reflector?
are there any logs i can look at to see what's going on? I've attached my analog and mmdvm logs but they look ok. maybe there is an ambe log or dstar specific log i can looking for?
I've tried some XRF reflectors and transmit appears to work fine over there. seems to be limited to REF.

On Mon, Sep 30, 2019 at 11:14 AM EA5GVK Joaquin <ea5gvk@...> wrote:
New Version 2.0 Image DVSwitch Server  ( format .img microsd 16gb).
English and Spanish Version
https://mega.nz/#!mwYREKia!AF6MPV3g3223dA1CPPc00HttVTAIjTDgTqzm4W3RHwE

English manual
https://mega.nz/#!uoBzBYBD!F9qFqZecQ_fQCrUzXqngSbGS1xoNQR0fEpbughtj1r4

More Info: http://ea5gvk-dmr.zigor.es/2019/09/30/nueva-version-2-0-imagen-server-dvswitch-actualizable-y-server-hblink/


Re: bridging ASL, DMR and DSTAR

Patrick Perdue
 

Yes, I've also thought of high pass/low pass filtering into and out of ASL. Ideally, I'd use a chain that looks something like this:

DMR > hpf/lpf > limiter > AB > ASL

Throw an expander after the hpf/lpf when going the other way, and maybe not use a limiter.

Some of these digital radios are just unnecessarily hot (Radioddity GD77S, for example,) and I'd like to tame that on the way in to ASL without just attenuating the entire signal, since levels will be everywhere.


Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge

SP2ONG Waldek
 


> Options=StartRef=4004  << will this work with XLX from  MMDVM_BRIDGE dmr network config to link module D ? This would be great if it works, if not could it be enabled ?


The documnet:

https://github.com/DVSwitch/MMDVM_Bridge/blob/master/DOC/DMRplus_startup_options.md

it is for DMRPlus not for XLX Network


5241 - 5260 of 10139