Date   

Re: Bridging a P25Reflector and a YSFReflector?

Steve N4IRS
 

So,
I see no traffic.

From your MB.ini I assume your YSF reflector is listening on 42000 on the same machine:
[System Fusion Network]
Enable=1
LocalAddress=0
LocalPort=3200
GatewayAddress=127.0.0.1 <------ localhost
GatewayPort=42000 <----- port MB expects the YSF reflector is listening on.
Debug=0

For P25 you need to be running P25Gateway. You will want to set the startup to point at your P25Reflector.
Your flow diagram will look like this:

P25User <-> P25Reflector <-> P25Gateway <-> MMDVM_Bridge <-> YSFReflector <-> YSFUser

Steve N4IRS



On 10/10/2019 1:33 PM, litwinjwi@... wrote:
Hi Steve. I attached the log from the mmdvm bridge and also the p25 reflector so you can see at the timestamps Thanks :)


Re: Bridging a P25Reflector and a YSFReflector?

Jake Litwin
 

Hi Steve. I attached the log from the mmdvm bridge and also the p25 reflector so you can see at the timestamps Thanks :)


Re: Bridging a P25Reflector and a YSFReflector?

Steve N4IRS
 

Jake,
It would help to see the MMDVM_Bridge log WHEN the native traffic appears on reflectors. I usually clear the log start MMDVM_Bridge and send traffic to one of the reflectors. I capture the startup of MB and the traffic. I then stop MB. This keep the log clean and easier to troubleshoot.

Steve N4IRS

On 10/10/2019 10:30 AM, litwinjwi@... wrote:
Sorry to reopen this thread. Need a little guidance. So initially I set up A YSF Reflector. On that same server I have an MMDVM Bridge setup to bridge YSF to DMR. I have installed the P25 Reflector using the apt-get repository. I installed another instance of the MMDVM_Bridge. Named it's instance directory MMDVM_Bridge2. The P25 reflector is up and shows in the log when someone connect to it. However, I can't get it to bridge over to the YSF Reflector. I have attached the configs for DVSwitch.ini and MMDVM_Bridge.ini for that second instance. Also the config for P25Reflector.ini

Any thoughts? My first instinct is maybe because YSF is already bridged to DMR that there is a port issue because YSF is already bridged over. I'm fairly new to this but catching on.


Re: Bridging a P25Reflector and a YSFReflector?

Jake Litwin
 

Sorry to reopen this thread. Need a little guidance. So initially I set up A YSF Reflector. On that same server I have an MMDVM Bridge setup to bridge YSF to DMR. I have installed the P25 Reflector using the apt-get repository. I installed another instance of the MMDVM_Bridge. Named it's instance directory MMDVM_Bridge2. The P25 reflector is up and shows in the log when someone connect to it. However, I can't get it to bridge over to the YSF Reflector. I have attached the configs for DVSwitch.ini and MMDVM_Bridge.ini for that second instance. Also the config for P25Reflector.ini

Any thoughts? My first instinct is maybe because YSF is already bridged to DMR that there is a port issue because YSF is already bridged over. I'm fairly new to this but catching on.


Re: ASL BeagleBone Black

Mike/K5JR
 

Thanks. And I’m signed up there, so will look for your next email. 

I’ve got a few of these BBB’s laying around from the “before RPi” days. Too small/light for a doorstop. 


tnx
Mike / W5JR
Alpharetta GA


On Oct 9, 2019, at 9:24 PM, Steve N4IRS <szingman@...> wrote:

I tested the updated image and you can login as repeater via ssh.
To be clear, I no longer "support ASL" I have turned that over to the ASL board and dev team. I doubt they will create a new BBB image (not even sure they knew it existed) Since I did build the images I do feel responsible for them at least working.

Mike N4IRR and I had a conversation this afternoon and we remember the BBB may exibit a problem inherent in all the ASL images. We have been made aware of a possible fix and the BBB may be a good place to test it. Stay tuned.

I would ask that we move this to the DVSwitch | allstarlink subgroup.

Steve N4IRS

On 10/9/19 9:15 PM, Mike/W5JR wrote:
Great!!!

I’ll try it. Thanks for the quick turnaround. I have an old laptop that I’ve been thinking would make a perfect Linux computer for things just as you were describing. 


tnx
Mike / W5JR
Alpharetta GA


On Oct 9, 2019, at 8:41 PM, Steve N4IRS <szingman@...> wrote:

Mike,
I have modified (and not yet verified) the .img file on dvswitch.org The file is <http://dvswitch.org/files/ASL_Images/BeagleBoard/Beagle_Bone_Black/Stretch/ASL_1.01-20191009-armhf-bbb-stretch-image.img>

Steve N4IRS


Re: ASL BeagleBone Black

Steve N4IRS
 

I tested the updated image and you can login as repeater via ssh.
To be clear, I no longer "support ASL" I have turned that over to the ASL board and dev team. I doubt they will create a new BBB image (not even sure they knew it existed) Since I did build the images I do feel responsible for them at least working.

Mike N4IRR and I had a conversation this afternoon and we remember the BBB may exibit a problem inherent in all the ASL images. We have been made aware of a possible fix and the BBB may be a good place to test it. Stay tuned.

I would ask that we move this to the DVSwitch | allstarlink subgroup.

Steve N4IRS

On 10/9/19 9:15 PM, Mike/W5JR wrote:
Great!!!

I’ll try it. Thanks for the quick turnaround. I have an old laptop that I’ve been thinking would make a perfect Linux computer for things just as you were describing. 


tnx
Mike / W5JR
Alpharetta GA


On Oct 9, 2019, at 8:41 PM, Steve N4IRS <szingman@...> wrote:

Mike,
I have modified (and not yet verified) the .img file on dvswitch.org The file is <http://dvswitch.org/files/ASL_Images/BeagleBoard/Beagle_Bone_Black/Stretch/ASL_1.01-20191009-armhf-bbb-stretch-image.img>

Steve N4IRS


Re: ASL BeagleBone Black

Mike/K5JR
 

Great!!!

I’ll try it. Thanks for the quick turnaround. I have an old laptop that I’ve been thinking would make a perfect Linux computer for things just as you were describing. 


tnx
Mike / W5JR
Alpharetta GA


On Oct 9, 2019, at 8:41 PM, Steve N4IRS <szingman@...> wrote:

Mike,
I have modified (and not yet verified) the .img file on dvswitch.org The file is <http://dvswitch.org/files/ASL_Images/BeagleBoard/Beagle_Bone_Black/Stretch/ASL_1.01-20191009-armhf-bbb-stretch-image.img>

Steve N4IRS


Re: ASL BeagleBone Black

Steve N4IRS
 

Mike,
I have modified (and not yet verified) the .img file on dvswitch.org The file is <http://dvswitch.org/files/ASL_Images/BeagleBoard/Beagle_Bone_Black/Stretch/ASL_1.01-20191009-armhf-bbb-stretch-image.img>

Steve N4IRS


Re: ASL BeagleBone Black

Steve N4IRS
 

Mike,
I was able to dig out my BBB and I burned the image. As you report, you can not ssh in as repeater with a password of allstarlink. I have no idea how I missed this.
It turns out the issue is not the password, the problem is ssh. I can't test it right now but I believe you could login via the console (HDMI and USB keyboard) or via a serial connection.

I do have a way to allow ssh login. Can you mount the SD card on a Linux machine as root?
If so, navigate to the etc directory on the card.
Add the following to sshd_config:
AllowUsers repeater
Save the file, unmount the SD card, insert the card in the BBB.
Login as repeater with a password of allstarlink
You will be required to change the password.

If you can't do this I will when I get time modify the image and reupload it to dvswitch.org

Sorry for the confusion,
Steve N4IRS


On 10/9/19 12:40 PM, Mike/W5JR wrote:
Too much multitasking....

Steve Z.....


tnx
Mike / W5JR
Alpharetta GA


On Oct 9, 2019, at 11:30 AM, Mike/W5JR via Groups.Io <w5jr.lists@...> wrote:

Mike Z, I did reimage, but no change. I also tried a few other perturbations without success. 

No urgency/deadline on getting this going. Let me know when you get a chance to look at it once you’re settled in. 


tnx
Mike / W5JR
Alpharetta GA


On Oct 8, 2019, at 7:06 PM, Steve N4IRS <szingman@...> wrote:

Yep, that's what I wrote.

On 10/8/19 6:43 PM, Mike/W5JR wrote:
Oops, error in the URL. Use this one. 



tnx
Mike / W5JR
Alpharetta GA


On Oct 8, 2019, at 6:30 PM, Mike/W5JR via Groups.Io <w5jr.lists@...> wrote:

Hi, Steve. 

The bbb version I’m inquiring about is *not* the hv bbb. This is the one the other Steve, N4IRS, put on the ASL_Images on the dvswitch site. 

dvswitch.org/files/ASL_Images/BeagleBoard/Beagle_Board_Black/


tnx
Mike / W5JR
Alpharetta GA


On Oct 8, 2019, at 5:50 PM, Steve KC1AWV <smiller@...> wrote:

> The accompanying readme file says user:repeater, pw:allstarlink, consistent with other ASL rpi versions.
Then, either the README is incorrect, or the image is incorrect. I'd ask whoever wrote the README in that case.

> I realize that little, if any, development is taking place on the ASL version. And absolutely *zero* development has taken place on the hv version in years.
Which ASL version do you mean? And as far as I can see, then last update to HamVOIP was on August 22, 2019 for the RPi 4.

HamVOIP has a release called Final Version (1.2.2) located here: https://www2.hamvoip.org/BBB/BBB_Allstar_V1.2.2.img.zip

Hope this helps.

On Tue, Oct 8, 2019 at 5:37 PM Mike/W5JR <w5jr.lists@...> wrote:
Nope, the ASL_1.01-20180228-armhf-bbb-strech-image.img. The accompanying readme file says user:repeater, pw:allstarlink, consistent with other ASL rpi versions. 

I do have a couple of the early hamvoip bbb units operating (pre rpi) and wish to migrate them over to ASL. Yes, they are “root”. 

I realize that little, if any, development is taking place on the ASL version. And absolutely *zero* development has taken place on the hv version in years. 


tnx
Mike / W5JR
Alpharetta GA


On Oct 8, 2019, at 5:09 PM, Steve KC1AWV <smiller@...> wrote:

A quick Google search for Beaglebone Black AllStarLink provided a document with this information:

The login username is root and the PW is root

I also assume this is the hamvoip distribution? If so, you may get better help from the hamvoip folks.

On Tue, Oct 8, 2019 at 4:27 PM Mike/W5JR <w5jr.lists@...> wrote:
I’ve finally gotten around to making an SD card for the BBB ASL image. I’m trying to log into the unit for the first time with this SD card. I’m connected to it via ssh port 22 just fine and it appears to accept the “repeater” user name. Entering the password specified in the readme file of “allstarlink” isn’t working. I’ve tried some capitalization perturbations, but no joy. Is there a different pw? Reimage the SD card? Looking for ideas. 

Tnx
Mike/W5JR
Alpharetta GA


--
Steve Miller
KC1AWV


--
Steve Miller
KC1AWV



Re: Multiple Dashboards

Steve N4IRS
 

No, you can use the same web server for multiple dashboards. Just put each dashboard in a different directory.

Sent by smoke signal (AT&T)


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of litwinjwi@... <litwinjwi@...>
Sent: Wednesday, October 9, 2019 10:11:01 AM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: [DVSwitch] Multiple Dashboards
 
I have a YSF Reflector and dashboard all setup and working great. I just added a P25 Reflector to the same server. I would like to have a dashboard for P25. Is it possible to run 2 dashboards on the same server? I almost think the second one would have to be on different web port correct?


Multiple Dashboards

Jake Litwin
 

I have a YSF Reflector and dashboard all setup and working great. I just added a P25 Reflector to the same server. I would like to have a dashboard for P25. Is it possible to run 2 dashboards on the same server? I almost think the second one would have to be on different web port correct?


Re: ASL BeagleBone Black

Mike/K5JR
 

Too much multitasking....

Steve Z.....


tnx
Mike / W5JR
Alpharetta GA


On Oct 9, 2019, at 11:30 AM, Mike/W5JR via Groups.Io <w5jr.lists@...> wrote:

Mike Z, I did reimage, but no change. I also tried a few other perturbations without success. 

No urgency/deadline on getting this going. Let me know when you get a chance to look at it once you’re settled in. 


tnx
Mike / W5JR
Alpharetta GA


On Oct 8, 2019, at 7:06 PM, Steve N4IRS <szingman@...> wrote:

Yep, that's what I wrote.

On 10/8/19 6:43 PM, Mike/W5JR wrote:
Oops, error in the URL. Use this one. 



tnx
Mike / W5JR
Alpharetta GA


On Oct 8, 2019, at 6:30 PM, Mike/W5JR via Groups.Io <w5jr.lists@...> wrote:

Hi, Steve. 

The bbb version I’m inquiring about is *not* the hv bbb. This is the one the other Steve, N4IRS, put on the ASL_Images on the dvswitch site. 

dvswitch.org/files/ASL_Images/BeagleBoard/Beagle_Board_Black/


tnx
Mike / W5JR
Alpharetta GA


On Oct 8, 2019, at 5:50 PM, Steve KC1AWV <smiller@...> wrote:

> The accompanying readme file says user:repeater, pw:allstarlink, consistent with other ASL rpi versions.
Then, either the README is incorrect, or the image is incorrect. I'd ask whoever wrote the README in that case.

> I realize that little, if any, development is taking place on the ASL version. And absolutely *zero* development has taken place on the hv version in years.
Which ASL version do you mean? And as far as I can see, then last update to HamVOIP was on August 22, 2019 for the RPi 4.

HamVOIP has a release called Final Version (1.2.2) located here: https://www2.hamvoip.org/BBB/BBB_Allstar_V1.2.2.img.zip

Hope this helps.

On Tue, Oct 8, 2019 at 5:37 PM Mike/W5JR <w5jr.lists@...> wrote:
Nope, the ASL_1.01-20180228-armhf-bbb-strech-image.img. The accompanying readme file says user:repeater, pw:allstarlink, consistent with other ASL rpi versions. 

I do have a couple of the early hamvoip bbb units operating (pre rpi) and wish to migrate them over to ASL. Yes, they are “root”. 

I realize that little, if any, development is taking place on the ASL version. And absolutely *zero* development has taken place on the hv version in years. 


tnx
Mike / W5JR
Alpharetta GA


On Oct 8, 2019, at 5:09 PM, Steve KC1AWV <smiller@...> wrote:

A quick Google search for Beaglebone Black AllStarLink provided a document with this information:

The login username is root and the PW is root

I also assume this is the hamvoip distribution? If so, you may get better help from the hamvoip folks.

On Tue, Oct 8, 2019 at 4:27 PM Mike/W5JR <w5jr.lists@...> wrote:
I’ve finally gotten around to making an SD card for the BBB ASL image. I’m trying to log into the unit for the first time with this SD card. I’m connected to it via ssh port 22 just fine and it appears to accept the “repeater” user name. Entering the password specified in the readme file of “allstarlink” isn’t working. I’ve tried some capitalization perturbations, but no joy. Is there a different pw? Reimage the SD card? Looking for ideas. 

Tnx
Mike/W5JR
Alpharetta GA


--
Steve Miller
KC1AWV


--
Steve Miller
KC1AWV


Re: ASL BeagleBone Black

Mike/K5JR
 

Mike Z, I did reimage, but no change. I also tried a few other perturbations without success. 

No urgency/deadline on getting this going. Let me know when you get a chance to look at it once you’re settled in. 


tnx
Mike / W5JR
Alpharetta GA


On Oct 8, 2019, at 7:06 PM, Steve N4IRS <szingman@...> wrote:

Yep, that's what I wrote.

On 10/8/19 6:43 PM, Mike/W5JR wrote:
Oops, error in the URL. Use this one. 



tnx
Mike / W5JR
Alpharetta GA


On Oct 8, 2019, at 6:30 PM, Mike/W5JR via Groups.Io <w5jr.lists@...> wrote:

Hi, Steve. 

The bbb version I’m inquiring about is *not* the hv bbb. This is the one the other Steve, N4IRS, put on the ASL_Images on the dvswitch site. 

dvswitch.org/files/ASL_Images/BeagleBoard/Beagle_Board_Black/


tnx
Mike / W5JR
Alpharetta GA


On Oct 8, 2019, at 5:50 PM, Steve KC1AWV <smiller@...> wrote:

> The accompanying readme file says user:repeater, pw:allstarlink, consistent with other ASL rpi versions.
Then, either the README is incorrect, or the image is incorrect. I'd ask whoever wrote the README in that case.

> I realize that little, if any, development is taking place on the ASL version. And absolutely *zero* development has taken place on the hv version in years.
Which ASL version do you mean? And as far as I can see, then last update to HamVOIP was on August 22, 2019 for the RPi 4.

HamVOIP has a release called Final Version (1.2.2) located here: https://www2.hamvoip.org/BBB/BBB_Allstar_V1.2.2.img.zip

Hope this helps.

On Tue, Oct 8, 2019 at 5:37 PM Mike/W5JR <w5jr.lists@...> wrote:
Nope, the ASL_1.01-20180228-armhf-bbb-strech-image.img. The accompanying readme file says user:repeater, pw:allstarlink, consistent with other ASL rpi versions. 

I do have a couple of the early hamvoip bbb units operating (pre rpi) and wish to migrate them over to ASL. Yes, they are “root”. 

I realize that little, if any, development is taking place on the ASL version. And absolutely *zero* development has taken place on the hv version in years. 


tnx
Mike / W5JR
Alpharetta GA


On Oct 8, 2019, at 5:09 PM, Steve KC1AWV <smiller@...> wrote:

A quick Google search for Beaglebone Black AllStarLink provided a document with this information:

The login username is root and the PW is root

I also assume this is the hamvoip distribution? If so, you may get better help from the hamvoip folks.

On Tue, Oct 8, 2019 at 4:27 PM Mike/W5JR <w5jr.lists@...> wrote:
I’ve finally gotten around to making an SD card for the BBB ASL image. I’m trying to log into the unit for the first time with this SD card. I’m connected to it via ssh port 22 just fine and it appears to accept the “repeater” user name. Entering the password specified in the readme file of “allstarlink” isn’t working. I’ve tried some capitalization perturbations, but no joy. Is there a different pw? Reimage the SD card? Looking for ideas. 

Tnx
Mike/W5JR
Alpharetta GA


--
Steve Miller
KC1AWV


--
Steve Miller
KC1AWV


Re: MMDVM_BRIDGE

Chris K7AZ
 

Yes, that sounds plausible.    I was transcoding the Monday evening GoldCoastNet.com and I'll have to remind them not to quick key.  Odd it works fine other weeks.   

Thank you,
Chris K7AZ 



Sent from my Verizon, Samsung Galaxy smartphone

-------- Original message --------
From: "Russell, KV4S" <russelljthomas@...>
Date: 10/8/19 12:24 (GMT-08:00)
To: main@dvswitch.groups.io
Subject: Re: [DVSwitch] MMDVM_BRIDGE

sounds like you got you dmr id blocked by keying up to close together. do not use it for an hour and it should unlock.

also you may want to set min TX to 2500 in analog_bridge to help with that.

On Tue, Oct 8, 2019 at 2:21 PM Chris K7AZ via Groups.Io <kilo7alphazulu=verizon.net@groups.io> wrote:


Has anyone heard of a voice saying "blocked" related to transcoding DMR to ASL?
Typically its heard on the ASL side and 1-2 seconds after ASL source unkeys.   

Thank you in advance for any help debugging this issue.  

Chris K7AZ 

Sent from my Verizon, Samsung Galaxy smartphone


Re: ASL BeagleBone Black

Steve N4IRS
 

Yep, that's what I wrote.

On 10/8/19 6:43 PM, Mike/W5JR wrote:
Oops, error in the URL. Use this one. 



tnx
Mike / W5JR
Alpharetta GA


On Oct 8, 2019, at 6:30 PM, Mike/W5JR via Groups.Io <w5jr.lists@...> wrote:

Hi, Steve. 

The bbb version I’m inquiring about is *not* the hv bbb. This is the one the other Steve, N4IRS, put on the ASL_Images on the dvswitch site. 

dvswitch.org/files/ASL_Images/BeagleBoard/Beagle_Board_Black/


tnx
Mike / W5JR
Alpharetta GA


On Oct 8, 2019, at 5:50 PM, Steve KC1AWV <smiller@...> wrote:

> The accompanying readme file says user:repeater, pw:allstarlink, consistent with other ASL rpi versions.
Then, either the README is incorrect, or the image is incorrect. I'd ask whoever wrote the README in that case.

> I realize that little, if any, development is taking place on the ASL version. And absolutely *zero* development has taken place on the hv version in years.
Which ASL version do you mean? And as far as I can see, then last update to HamVOIP was on August 22, 2019 for the RPi 4.

HamVOIP has a release called Final Version (1.2.2) located here: https://www2.hamvoip.org/BBB/BBB_Allstar_V1.2.2.img.zip

Hope this helps.

On Tue, Oct 8, 2019 at 5:37 PM Mike/W5JR <w5jr.lists@...> wrote:
Nope, the ASL_1.01-20180228-armhf-bbb-strech-image.img. The accompanying readme file says user:repeater, pw:allstarlink, consistent with other ASL rpi versions. 

I do have a couple of the early hamvoip bbb units operating (pre rpi) and wish to migrate them over to ASL. Yes, they are “root”. 

I realize that little, if any, development is taking place on the ASL version. And absolutely *zero* development has taken place on the hv version in years. 


tnx
Mike / W5JR
Alpharetta GA


On Oct 8, 2019, at 5:09 PM, Steve KC1AWV <smiller@...> wrote:

A quick Google search for Beaglebone Black AllStarLink provided a document with this information:

The login username is root and the PW is root

I also assume this is the hamvoip distribution? If so, you may get better help from the hamvoip folks.

On Tue, Oct 8, 2019 at 4:27 PM Mike/W5JR <w5jr.lists@...> wrote:
I’ve finally gotten around to making an SD card for the BBB ASL image. I’m trying to log into the unit for the first time with this SD card. I’m connected to it via ssh port 22 just fine and it appears to accept the “repeater” user name. Entering the password specified in the readme file of “allstarlink” isn’t working. I’ve tried some capitalization perturbations, but no joy. Is there a different pw? Reimage the SD card? Looking for ideas. 

Tnx
Mike/W5JR
Alpharetta GA


--
Steve Miller
KC1AWV


--
Steve Miller
KC1AWV


Re: ASL BeagleBone Black

Mike/K5JR
 

Oops, error in the URL. Use this one. 



tnx
Mike / W5JR
Alpharetta GA


On Oct 8, 2019, at 6:30 PM, Mike/W5JR via Groups.Io <w5jr.lists@...> wrote:

Hi, Steve. 

The bbb version I’m inquiring about is *not* the hv bbb. This is the one the other Steve, N4IRS, put on the ASL_Images on the dvswitch site. 

dvswitch.org/files/ASL_Images/BeagleBoard/Beagle_Board_Black/


tnx
Mike / W5JR
Alpharetta GA


On Oct 8, 2019, at 5:50 PM, Steve KC1AWV <smiller@...> wrote:

> The accompanying readme file says user:repeater, pw:allstarlink, consistent with other ASL rpi versions.
Then, either the README is incorrect, or the image is incorrect. I'd ask whoever wrote the README in that case.

> I realize that little, if any, development is taking place on the ASL version. And absolutely *zero* development has taken place on the hv version in years.
Which ASL version do you mean? And as far as I can see, then last update to HamVOIP was on August 22, 2019 for the RPi 4.

HamVOIP has a release called Final Version (1.2.2) located here: https://www2.hamvoip.org/BBB/BBB_Allstar_V1.2.2.img.zip

Hope this helps.

On Tue, Oct 8, 2019 at 5:37 PM Mike/W5JR <w5jr.lists@...> wrote:
Nope, the ASL_1.01-20180228-armhf-bbb-strech-image.img. The accompanying readme file says user:repeater, pw:allstarlink, consistent with other ASL rpi versions. 

I do have a couple of the early hamvoip bbb units operating (pre rpi) and wish to migrate them over to ASL. Yes, they are “root”. 

I realize that little, if any, development is taking place on the ASL version. And absolutely *zero* development has taken place on the hv version in years. 


tnx
Mike / W5JR
Alpharetta GA


On Oct 8, 2019, at 5:09 PM, Steve KC1AWV <smiller@...> wrote:

A quick Google search for Beaglebone Black AllStarLink provided a document with this information:

The login username is root and the PW is root

I also assume this is the hamvoip distribution? If so, you may get better help from the hamvoip folks.

On Tue, Oct 8, 2019 at 4:27 PM Mike/W5JR <w5jr.lists@...> wrote:
I’ve finally gotten around to making an SD card for the BBB ASL image. I’m trying to log into the unit for the first time with this SD card. I’m connected to it via ssh port 22 just fine and it appears to accept the “repeater” user name. Entering the password specified in the readme file of “allstarlink” isn’t working. I’ve tried some capitalization perturbations, but no joy. Is there a different pw? Reimage the SD card? Looking for ideas. 

Tnx
Mike/W5JR
Alpharetta GA



--
Steve Miller
KC1AWV



--
Steve Miller
KC1AWV


Re: ASL BeagleBone Black

Mike/K5JR
 

Thanks, Steve. I’m likely to reimage the SD card. I had the unit powered up for a few weeks anticipating connecting to it  and change the SSH port. It’s entirely possible “someone” beat me to it, ha. It’s been unplugged for about a month and I just got back to powering it up to work with it. 

Good luck with the move. 

tnx
Mike / W5JR
Alpharetta GA


On Oct 8, 2019, at 6:33 PM, Steve N4IRS <szingman@...> wrote:

Mike,
You are correct on what SHOULD be the login and password. I built that image over a year ago so I'm a bit fuzzy. My BBB is packed up for a move so I can't test it here. I know Mike also has a BBB so if he can find it maybe he can test. As soon as I have a desk again (next week) I'll give it a try.

Sorry I can't be of more help right now.

Steve N4IRS

Sent by smoke signal (AT&T)


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Mike/W5JR <w5jr.lists@...>
Sent: Tuesday, October 8, 2019 5:37:04 PM
To: main@dvswitch.groups.io <main@dvswitch.groups.io>
Subject: Re: [DVSwitch] ASL BeagleBone Black
 
Nope, the ASL_1.01-20180228-armhf-bbb-strech-image.img. The accompanying readme file says user:repeater, pw:allstarlink, consistent with other ASL rpi versions. 

I do have a couple of the early hamvoip bbb units operating (pre rpi) and wish to migrate them over to ASL. Yes, they are “root”. 

I realize that little, if any, development is taking place on the ASL version. And absolutely *zero* development has taken place on the hv version in years. 


tnx
Mike / W5JR
Alpharetta GA


On Oct 8, 2019, at 5:09 PM, Steve KC1AWV <smiller@...> wrote:

A quick Google search for Beaglebone Black AllStarLink provided a document with this information:

The login username is root and the PW is root

I also assume this is the hamvoip distribution? If so, you may get better help from the hamvoip folks.

On Tue, Oct 8, 2019 at 4:27 PM Mike/W5JR <w5jr.lists@...> wrote:
I’ve finally gotten around to making an SD card for the BBB ASL image. I’m trying to log into the unit for the first time with this SD card. I’m connected to it via ssh port 22 just fine and it appears to accept the “repeater” user name. Entering the password specified in the readme file of “allstarlink” isn’t working. I’ve tried some capitalization perturbations, but no joy. Is there a different pw? Reimage the SD card? Looking for ideas. 

Tnx
Mike/W5JR
Alpharetta GA



--
Steve Miller
KC1AWV


Re: ASL BeagleBone Black

Steve N4IRS
 

Mike,
You are correct on what SHOULD be the login and password. I built that image over a year ago so I'm a bit fuzzy. My BBB is packed up for a move so I can't test it here. I know Mike also has a BBB so if he can find it maybe he can test. As soon as I have a desk again (next week) I'll give it a try.

Sorry I can't be of more help right now.

Steve N4IRS

Sent by smoke signal (AT&T)


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Mike/W5JR <w5jr.lists@...>
Sent: Tuesday, October 8, 2019 5:37:04 PM
To: main@dvswitch.groups.io <main@dvswitch.groups.io>
Subject: Re: [DVSwitch] ASL BeagleBone Black
 
Nope, the ASL_1.01-20180228-armhf-bbb-strech-image.img. The accompanying readme file says user:repeater, pw:allstarlink, consistent with other ASL rpi versions. 

I do have a couple of the early hamvoip bbb units operating (pre rpi) and wish to migrate them over to ASL. Yes, they are “root”. 

I realize that little, if any, development is taking place on the ASL version. And absolutely *zero* development has taken place on the hv version in years. 


tnx
Mike / W5JR
Alpharetta GA


On Oct 8, 2019, at 5:09 PM, Steve KC1AWV <smiller@...> wrote:

A quick Google search for Beaglebone Black AllStarLink provided a document with this information:

The login username is root and the PW is root

I also assume this is the hamvoip distribution? If so, you may get better help from the hamvoip folks.

On Tue, Oct 8, 2019 at 4:27 PM Mike/W5JR <w5jr.lists@...> wrote:
I’ve finally gotten around to making an SD card for the BBB ASL image. I’m trying to log into the unit for the first time with this SD card. I’m connected to it via ssh port 22 just fine and it appears to accept the “repeater” user name. Entering the password specified in the readme file of “allstarlink” isn’t working. I’ve tried some capitalization perturbations, but no joy. Is there a different pw? Reimage the SD card? Looking for ideas. 

Tnx
Mike/W5JR
Alpharetta GA



--
Steve Miller
KC1AWV


Re: ASL BeagleBone Black

Mike/K5JR
 

Hi, Steve. 

The bbb version I’m inquiring about is *not* the hv bbb. This is the one the other Steve, N4IRS, put on the ASL_Images on the dvswitch site. 

On Oct 8, 2019, at 5:50 PM, Steve KC1AWV <smiller@...> wrote:

> The accompanying readme file says user:repeater, pw:allstarlink, consistent with other ASL rpi versions.
Then, either the README is incorrect, or the image is incorrect. I'd ask whoever wrote the README in that case.

> I realize that little, if any, development is taking place on the ASL version. And absolutely *zero* development has taken place on the hv version in years.
Which ASL version do you mean? And as far as I can see, then last update to HamVOIP was on August 22, 2019 for the RPi 4.

HamVOIP has a release called Final Version (1.2.2) located here: https://www2.hamvoip.org/BBB/BBB_Allstar_V1.2.2.img.zip

Hope this helps.

On Tue, Oct 8, 2019 at 5:37 PM Mike/W5JR <w5jr.lists@...> wrote:
Nope, the ASL_1.01-20180228-armhf-bbb-strech-image.img. The accompanying readme file says user:repeater, pw:allstarlink, consistent with other ASL rpi versions. 

I do have a couple of the early hamvoip bbb units operating (pre rpi) and wish to migrate them over to ASL. Yes, they are “root”. 

I realize that little, if any, development is taking place on the ASL version. And absolutely *zero* development has taken place on the hv version in years. 


tnx
Mike / W5JR
Alpharetta GA


On Oct 8, 2019, at 5:09 PM, Steve KC1AWV <smiller@...> wrote:

A quick Google search for Beaglebone Black AllStarLink provided a document with this information:

The login username is root and the PW is root

I also assume this is the hamvoip distribution? If so, you may get better help from the hamvoip folks.

On Tue, Oct 8, 2019 at 4:27 PM Mike/W5JR <w5jr.lists@...> wrote:
I’ve finally gotten around to making an SD card for the BBB ASL image. I’m trying to log into the unit for the first time with this SD card. I’m connected to it via ssh port 22 just fine and it appears to accept the “repeater” user name. Entering the password specified in the readme file of “allstarlink” isn’t working. I’ve tried some capitalization perturbations, but no joy. Is there a different pw? Reimage the SD card? Looking for ideas. 

Tnx
Mike/W5JR
Alpharetta GA



--
Steve Miller
KC1AWV



--
Steve Miller
KC1AWV


Re: ASL BeagleBone Black

Steve KC1AWV
 

> The accompanying readme file says user:repeater, pw:allstarlink, consistent with other ASL rpi versions.
Then, either the README is incorrect, or the image is incorrect. I'd ask whoever wrote the README in that case.

> I realize that little, if any, development is taking place on the ASL version. And absolutely *zero* development has taken place on the hv version in years.
Which ASL version do you mean? And as far as I can see, then last update to HamVOIP was on August 22, 2019 for the RPi 4.

HamVOIP has a release called Final Version (1.2.2) located here: https://www2.hamvoip.org/BBB/BBB_Allstar_V1.2.2.img.zip

Hope this helps.


On Tue, Oct 8, 2019 at 5:37 PM Mike/W5JR <w5jr.lists@...> wrote:
Nope, the ASL_1.01-20180228-armhf-bbb-strech-image.img. The accompanying readme file says user:repeater, pw:allstarlink, consistent with other ASL rpi versions. 

I do have a couple of the early hamvoip bbb units operating (pre rpi) and wish to migrate them over to ASL. Yes, they are “root”. 

I realize that little, if any, development is taking place on the ASL version. And absolutely *zero* development has taken place on the hv version in years. 


tnx
Mike / W5JR
Alpharetta GA


On Oct 8, 2019, at 5:09 PM, Steve KC1AWV <smiller@...> wrote:

A quick Google search for Beaglebone Black AllStarLink provided a document with this information:

The login username is root and the PW is root

I also assume this is the hamvoip distribution? If so, you may get better help from the hamvoip folks.

On Tue, Oct 8, 2019 at 4:27 PM Mike/W5JR <w5jr.lists@...> wrote:
I’ve finally gotten around to making an SD card for the BBB ASL image. I’m trying to log into the unit for the first time with this SD card. I’m connected to it via ssh port 22 just fine and it appears to accept the “repeater” user name. Entering the password specified in the readme file of “allstarlink” isn’t working. I’ve tried some capitalization perturbations, but no joy. Is there a different pw? Reimage the SD card? Looking for ideas. 

Tnx
Mike/W5JR
Alpharetta GA



--
Steve Miller
KC1AWV



--
Steve Miller
KC1AWV

4981 - 5000 of 9925