Date   

Re: Bridging a P25Reflector and a YSFReflector?

Steve N4IRS
 

Is there a reason you can't just capture the text output from P25Gateway?

On 10/10/19 9:51 PM, Jake Litwin wrote:
Here’s a short video of what’s happening. 

On Thu, Oct 10, 2019 at 8:29 PM litwinjwi via Groups.Io <litwinjwi=gmail.com@groups.io> wrote:
The Reflector logs though say this

M: 2019-10-11 01:27:49.733 Adding N9KRG      (141.126.148.63:24186)
M: 2019-10-11 01:28:23.375 Transmission started from N9KRG      (141.126.148.63:24186)
M: 2019-10-11 01:28:23.385 Transmission from N9KRG at N9KRG      to TG 420
M: 2019-10-11 01:28:23.400 Data received from an unknown source - 127.0.0.1:42020
M: 2019-10-11 01:28:23.400 Data
M: 2019-10-11 01:28:23.400 0000:  62 02 02 0C 0B 12 64 00 00 80 18 72 8A 2A 19 40    *b.....d....r.*.@*
M: 2019-10-11 01:28:23.400 0010:  00 D4 0C 80 62 00                                  *....b.*
M: 2019-10-11 01:28:23.400 Data received from an unknown source - 127.0.0.1:42020
M: 2019-10-11 01:28:23.400 Data
M: 2019-10-11 01:28:23.400 0000:  63 18 72 8A 2A 19 40 00 D4 0C 80 62 00 02          *c.r.*.@....b..*
M: 2019-10-11 01:28:23.406 Data received from an unknown source - 127.0.0.1:42020
M: 2019-10-11 01:28:23.406 Data
M: 2019-10-11 01:28:23.406 0000:  64 00 00 00 00 18 72 8A 2A 19 40 00 D4 0C 80 62    *d.....r.*.@....b*
M: 2019-10-11 01:28:23.406 0010:  02                                                 *.*
M: 2019-10-11 01:28:23.406 Data received from an unknown source - 127.0.0.1:42020
M: 2019-10-11 01:28:23.406 Data


Re: Bridging a P25Reflector and a YSFReflector?

Jake Litwin
 

Here’s a short video of what’s happening. 

On Thu, Oct 10, 2019 at 8:29 PM litwinjwi via Groups.Io <litwinjwi=gmail.com@groups.io> wrote:
The Reflector logs though say this

M: 2019-10-11 01:27:49.733 Adding N9KRG      (141.126.148.63:24186)
M: 2019-10-11 01:28:23.375 Transmission started from N9KRG      (141.126.148.63:24186)
M: 2019-10-11 01:28:23.385 Transmission from N9KRG at N9KRG      to TG 420
M: 2019-10-11 01:28:23.400 Data received from an unknown source - 127.0.0.1:42020
M: 2019-10-11 01:28:23.400 Data
M: 2019-10-11 01:28:23.400 0000:  62 02 02 0C 0B 12 64 00 00 80 18 72 8A 2A 19 40    *b.....d....r.*.@*
M: 2019-10-11 01:28:23.400 0010:  00 D4 0C 80 62 00                                  *....b.*
M: 2019-10-11 01:28:23.400 Data received from an unknown source - 127.0.0.1:42020
M: 2019-10-11 01:28:23.400 Data
M: 2019-10-11 01:28:23.400 0000:  63 18 72 8A 2A 19 40 00 D4 0C 80 62 00 02          *c.r.*.@....b..*
M: 2019-10-11 01:28:23.406 Data received from an unknown source - 127.0.0.1:42020
M: 2019-10-11 01:28:23.406 Data
M: 2019-10-11 01:28:23.406 0000:  64 00 00 00 00 18 72 8A 2A 19 40 00 D4 0C 80 62    *d.....r.*.@....b*
M: 2019-10-11 01:28:23.406 0010:  02                                                 *.*
M: 2019-10-11 01:28:23.406 Data received from an unknown source - 127.0.0.1:42020
M: 2019-10-11 01:28:23.406 Data


Re: Bridging a P25Reflector and a YSFReflector?

Jake Litwin
 

The Reflector logs though say this

M: 2019-10-11 01:27:49.733 Adding N9KRG      (141.126.148.63:24186)
M: 2019-10-11 01:28:23.375 Transmission started from N9KRG      (141.126.148.63:24186)
M: 2019-10-11 01:28:23.385 Transmission from N9KRG at N9KRG      to TG 420
M: 2019-10-11 01:28:23.400 Data received from an unknown source - 127.0.0.1:42020
M: 2019-10-11 01:28:23.400 Data
M: 2019-10-11 01:28:23.400 0000:  62 02 02 0C 0B 12 64 00 00 80 18 72 8A 2A 19 40    *b.....d....r.*.@*
M: 2019-10-11 01:28:23.400 0010:  00 D4 0C 80 62 00                                  *....b.*
M: 2019-10-11 01:28:23.400 Data received from an unknown source - 127.0.0.1:42020
M: 2019-10-11 01:28:23.400 Data
M: 2019-10-11 01:28:23.400 0000:  63 18 72 8A 2A 19 40 00 D4 0C 80 62 00 02          *c.r.*.@....b..*
M: 2019-10-11 01:28:23.406 Data received from an unknown source - 127.0.0.1:42020
M: 2019-10-11 01:28:23.406 Data
M: 2019-10-11 01:28:23.406 0000:  64 00 00 00 00 18 72 8A 2A 19 40 00 D4 0C 80 62    *d.....r.*.@....b*
M: 2019-10-11 01:28:23.406 0010:  02                                                 *.*
M: 2019-10-11 01:28:23.406 Data received from an unknown source - 127.0.0.1:42020
M: 2019-10-11 01:28:23.406 Data


Re: Bridging a P25Reflector and a YSFReflector?

Steve N4IRS
 

Run it in the foreground and show ALL output.

On 10/10/19 9:25 PM, litwinjwi@... wrote:
Yeah nothing at all on the gateway. I've stop and started it a couple times.


Re: Bridging a P25Reflector and a YSFReflector?

Jake Litwin
 

Yeah nothing at all on the gateway. I've stop and started it a couple times.


Re: Bridging a P25Reflector and a YSFReflector?

Steve N4IRS
 

None at all when you start the gateway?

On 10/10/19 9:00 PM, litwinjwi@... wrote:
Sorry that is from the P25 Reflector. Not showing any activity or connections on the Gateway.


Re: Bridging a P25Reflector and a YSFReflector?

Jake Litwin
 

Sorry that is from the P25 Reflector. Not showing any activity or connections on the Gateway.


Re: Bridging a P25Reflector and a YSFReflector?

Jake Litwin
 

I'm actually seeing alot of this


M: 2019-10-11 00:11:34.249 Data
M: 2019-10-11 00:11:34.249 0000:  6C 18 F6 13 33 15 F9 00 4B 79 D8 6B 00 02          *l...3...Ky.k..*
M: 2019-10-11 00:11:34.254 Data received from an unknown source - 127.0.0.1:42020
M: 2019-10-11 00:11:34.254 Data
M: 2019-10-11 00:11:34.254 0000:  6D 00 00 00 00 18 E6 B2 6A 5E D0 01 4D D4 B7 4A    *m.......j^..M..$
M: 2019-10-11 00:11:34.254 0010:  02                                                 *.*
M: 2019-10-11 00:11:34.254 Data received from an unknown source - 127.0.0.1:42020


Re: Bridging a P25Reflector and a YSFReflector?

Steve N4IRS
 

Does the P25Gateway log show it connecting and staying connected to the reflector?

On 10/10/19 8:13 PM, litwinjwi@... wrote:
Oh crud. That wasn't the whole gateway config. Here it is. I do have a startup configured. I've attached the whole gateway config and the hosts file


Re: Bridging a P25Reflector and a YSFReflector?

Jake Litwin
 

Oh crud. That wasn't the whole gateway config. Here it is. I do have a startup configured. I've attached the whole gateway config and the hosts file


Re: Bridging a P25Reflector and a YSFReflector?

Steve N4IRS
 

I don't see a startup value.
You want the gateway to connect to the reflector at startup

On 10/10/19 7:32 PM, litwinjwi@... wrote:
Got it. The path flow makes sense. I cannot get traffic to pass over to the p25gateway though. P25reflector still recognizes that I'm connected. So I'm thinking I don't have the gateway setup right. I have the gateway config attached.


Re: Bridging a P25Reflector and a YSFReflector?

Jake Litwin
 

Got it. The path flow makes sense. I cannot get traffic to pass over to the p25gateway though. P25reflector still recognizes that I'm connected. So I'm thinking I don't have the gateway setup right. I have the gateway config attached.


Re: Bridging a P25Reflector and a YSFReflector?

Steve N4IRS
 

So,
I see no traffic.

From your MB.ini I assume your YSF reflector is listening on 42000 on the same machine:
[System Fusion Network]
Enable=1
LocalAddress=0
LocalPort=3200
GatewayAddress=127.0.0.1 <------ localhost
GatewayPort=42000 <----- port MB expects the YSF reflector is listening on.
Debug=0

For P25 you need to be running P25Gateway. You will want to set the startup to point at your P25Reflector.
Your flow diagram will look like this:

P25User <-> P25Reflector <-> P25Gateway <-> MMDVM_Bridge <-> YSFReflector <-> YSFUser

Steve N4IRS



On 10/10/2019 1:33 PM, litwinjwi@... wrote:
Hi Steve. I attached the log from the mmdvm bridge and also the p25 reflector so you can see at the timestamps Thanks :)


Re: Bridging a P25Reflector and a YSFReflector?

Jake Litwin
 

Hi Steve. I attached the log from the mmdvm bridge and also the p25 reflector so you can see at the timestamps Thanks :)


Re: Bridging a P25Reflector and a YSFReflector?

Steve N4IRS
 

Jake,
It would help to see the MMDVM_Bridge log WHEN the native traffic appears on reflectors. I usually clear the log start MMDVM_Bridge and send traffic to one of the reflectors. I capture the startup of MB and the traffic. I then stop MB. This keep the log clean and easier to troubleshoot.

Steve N4IRS

On 10/10/2019 10:30 AM, litwinjwi@... wrote:
Sorry to reopen this thread. Need a little guidance. So initially I set up A YSF Reflector. On that same server I have an MMDVM Bridge setup to bridge YSF to DMR. I have installed the P25 Reflector using the apt-get repository. I installed another instance of the MMDVM_Bridge. Named it's instance directory MMDVM_Bridge2. The P25 reflector is up and shows in the log when someone connect to it. However, I can't get it to bridge over to the YSF Reflector. I have attached the configs for DVSwitch.ini and MMDVM_Bridge.ini for that second instance. Also the config for P25Reflector.ini

Any thoughts? My first instinct is maybe because YSF is already bridged to DMR that there is a port issue because YSF is already bridged over. I'm fairly new to this but catching on.


Re: Bridging a P25Reflector and a YSFReflector?

Jake Litwin
 

Sorry to reopen this thread. Need a little guidance. So initially I set up A YSF Reflector. On that same server I have an MMDVM Bridge setup to bridge YSF to DMR. I have installed the P25 Reflector using the apt-get repository. I installed another instance of the MMDVM_Bridge. Named it's instance directory MMDVM_Bridge2. The P25 reflector is up and shows in the log when someone connect to it. However, I can't get it to bridge over to the YSF Reflector. I have attached the configs for DVSwitch.ini and MMDVM_Bridge.ini for that second instance. Also the config for P25Reflector.ini

Any thoughts? My first instinct is maybe because YSF is already bridged to DMR that there is a port issue because YSF is already bridged over. I'm fairly new to this but catching on.


Re: ASL BeagleBone Black

Mike/K5JR
 

Thanks. And I’m signed up there, so will look for your next email. 

I’ve got a few of these BBB’s laying around from the “before RPi” days. Too small/light for a doorstop. 


tnx
Mike / W5JR
Alpharetta GA


On Oct 9, 2019, at 9:24 PM, Steve N4IRS <szingman@...> wrote:

I tested the updated image and you can login as repeater via ssh.
To be clear, I no longer "support ASL" I have turned that over to the ASL board and dev team. I doubt they will create a new BBB image (not even sure they knew it existed) Since I did build the images I do feel responsible for them at least working.

Mike N4IRR and I had a conversation this afternoon and we remember the BBB may exibit a problem inherent in all the ASL images. We have been made aware of a possible fix and the BBB may be a good place to test it. Stay tuned.

I would ask that we move this to the DVSwitch | allstarlink subgroup.

Steve N4IRS

On 10/9/19 9:15 PM, Mike/W5JR wrote:
Great!!!

I’ll try it. Thanks for the quick turnaround. I have an old laptop that I’ve been thinking would make a perfect Linux computer for things just as you were describing. 


tnx
Mike / W5JR
Alpharetta GA


On Oct 9, 2019, at 8:41 PM, Steve N4IRS <szingman@...> wrote:

Mike,
I have modified (and not yet verified) the .img file on dvswitch.org The file is <http://dvswitch.org/files/ASL_Images/BeagleBoard/Beagle_Bone_Black/Stretch/ASL_1.01-20191009-armhf-bbb-stretch-image.img>

Steve N4IRS


Re: ASL BeagleBone Black

Steve N4IRS
 

I tested the updated image and you can login as repeater via ssh.
To be clear, I no longer "support ASL" I have turned that over to the ASL board and dev team. I doubt they will create a new BBB image (not even sure they knew it existed) Since I did build the images I do feel responsible for them at least working.

Mike N4IRR and I had a conversation this afternoon and we remember the BBB may exibit a problem inherent in all the ASL images. We have been made aware of a possible fix and the BBB may be a good place to test it. Stay tuned.

I would ask that we move this to the DVSwitch | allstarlink subgroup.

Steve N4IRS

On 10/9/19 9:15 PM, Mike/W5JR wrote:
Great!!!

I’ll try it. Thanks for the quick turnaround. I have an old laptop that I’ve been thinking would make a perfect Linux computer for things just as you were describing. 


tnx
Mike / W5JR
Alpharetta GA


On Oct 9, 2019, at 8:41 PM, Steve N4IRS <szingman@...> wrote:

Mike,
I have modified (and not yet verified) the .img file on dvswitch.org The file is <http://dvswitch.org/files/ASL_Images/BeagleBoard/Beagle_Bone_Black/Stretch/ASL_1.01-20191009-armhf-bbb-stretch-image.img>

Steve N4IRS


Re: ASL BeagleBone Black

Mike/K5JR
 

Great!!!

I’ll try it. Thanks for the quick turnaround. I have an old laptop that I’ve been thinking would make a perfect Linux computer for things just as you were describing. 


tnx
Mike / W5JR
Alpharetta GA


On Oct 9, 2019, at 8:41 PM, Steve N4IRS <szingman@...> wrote:

Mike,
I have modified (and not yet verified) the .img file on dvswitch.org The file is <http://dvswitch.org/files/ASL_Images/BeagleBoard/Beagle_Bone_Black/Stretch/ASL_1.01-20191009-armhf-bbb-stretch-image.img>

Steve N4IRS


Re: ASL BeagleBone Black

Steve N4IRS
 

Mike,
I have modified (and not yet verified) the .img file on dvswitch.org The file is <http://dvswitch.org/files/ASL_Images/BeagleBoard/Beagle_Bone_Black/Stretch/ASL_1.01-20191009-armhf-bbb-stretch-image.img>

Steve N4IRS

4841 - 4860 of 9797