Date   

Re: DVSwitch

 

K4VL,
Eric is correct you register for one from that link will put you in the database.
You build and host the reflector yourself and the database will verify it's connectable and assign the number once it can ping your server.
I've used this guide to build them:


On Mon, Oct 28, 2019 at 5:15 PM K4VL <73dek4vl@...> wrote:
I'm new to this so indulge me.
How do I get a YSF reflector address?
What port do I use?
Do I need to redirect that port in my router to my Pi?

Virus-free. www.avg.com

On Mon, Oct 28, 2019 at 3:28 PM Walter Holmes K5WH <walterh@...> wrote:

Ahh, gotcha…

 

I failed to notice that the GatewayAddress=ysfreflector.dvswitch.org line, as that needs to point to my YSFreflector address.

 

Thanks a ton for the help on that..

 

 

Walter/K5WH

 

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> On Behalf Of Russell, KV4S
Sent: Monday, October 28, 2019 2:33 PM
To: main@dvswitch.groups.io
Subject: Re: [DVSwitch] DVSwitch

 

note you may need to log into the brandmeister.network for the repeater id you used and make the talkgroup static.

 

On Mon, Oct 28, 2019 at 2:31 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:

[System Fusion Network]
Enable=1
LocalAddress=0
LocalPort=3200
GatewayAddress=ysfreflector.dvswitch.org
GatewayPort=42166

Debug=0
  

 

On Mon, Oct 28, 2019 at 2:30 PM Russell Thomas <russelljthomas@...> wrote:

that is located in the  MMDVM_Bridge.ini in the same folder.

 

On Mon, Oct 28, 2019 at 2:10 PM Walter Holmes K5WH <walterh@...> wrote:

Many thanks for that Russell.

 

I think I see in the file where to put the DMR talkgroup, which appears to be the ExportTG field.

 

But where do I put the YSF Reflector name/number?

 

[YSF]

Address = 127.0.0.1      ; Address to send AMBE TLV frames to (export)

TXPort = 31103             ; Port to send AMBE TLV frames to (export)

RXPort = 31100             ; Port to listen on (import)

FallbackID = 1234567   ; In case we can not find a valid DMR id in the database, export this one

ExportTG = 1234           ; Which TG to export

Slot = 2                          ; Export slot

 

 

Thnaks,

Walter/K5WH

 

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> On Behalf Of Russell, KV4S
Sent: Monday, October 28, 2019 1:49 PM
To: main@dvswitch.groups.io
Subject: Re: [DVSwitch] DVSwitch

 

All you need is mmdvm_bridge and this guide:

 

On Sun, Oct 27, 2019, 6:54 PM Walter Holmes K5WH <walterh@...> wrote:

Steve,

 

If I am understanding DVSwitch correctly, it appears there may be a couple ways to do some things from what I have seen.

 

I am specifically looking for the simplest way to bridge a DMR talkgroup to a YSF reflector.

 

Is there a way to run the MMDVM_Bridge separately?  Or something else? 

 

Or do you have to install the DVSwitch software as a base, before the bridge or other components can be used?

 

Many thanks for all the great work you’re doing with this.

 

Walter/K5WH


Virus-free. www.avg.com


Re: DVSwitch

Walter Holmes K5WH
 

I finally hacked through it, and it all looks like it’s all working as designed.  😊

 

Many thanks for all the great help guys..

 

 

Walter/K5WH

 

From: walterh@... <walterh@...>
Sent: Monday, October 28, 2019 5:21 PM
To: 'main@DVSwitch.groups.io' <main@DVSwitch.groups.io>
Subject: RE: [DVSwitch] DVSwitch

 

 

Did I miss something in the process?

 

 

apt-get install mmdvm-bridge

Reading package lists... Done

Building dependency tree

Reading state information... Done

E: Unable to locate package mmdvm-bridge

 

 

Walter/K5WH

 

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> On Behalf Of Russell, KV4S
Sent: Monday, October 28, 2019 2:00 PM
To: main@dvswitch.groups.io
Subject: Re: [DVSwitch] DVSwitch

 

As root
cd /tmp
 
wget http://dvswitch.org/install-dvswitch-repo
chmod +x install-dvswitch-repo
./install-dvswitch-repo
apt-get update
 
apt-get install mmdvm-bridge
then go by the guide for ini.
https://dvswitch.groups.io/g/main/wiki/Bridge-DMR-to-YSF-Narrow
systemctl enable mmdvm_bridge
systemctl start mmdvm_bridge
if you need to see the logs: 
cd /var/log/mmdvm
 
 
for the most recent log file in that folder and sub the name for the *
 
tail -f "*.log" 

 

On Mon, Oct 28, 2019 at 1:48 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:

All you need is mmdvm_bridge and this guide:

 

On Sun, Oct 27, 2019, 6:54 PM Walter Holmes K5WH <walterh@...> wrote:

Steve,

 

If I am understanding DVSwitch correctly, it appears there may be a couple ways to do some things from what I have seen.

 

I am specifically looking for the simplest way to bridge a DMR talkgroup to a YSF reflector.

 

Is there a way to run the MMDVM_Bridge separately?  Or something else? 

 

Or do you have to install the DVSwitch software as a base, before the bridge or other components can be used?

 

Many thanks for all the great work you’re doing with this.

 

Walter/K5WH


Re: DVSwitch

Eric-K6KWB
 

you can go here:
https://register.ysfreflector.de


Re: DVSwitch

Walter Holmes K5WH
 

 

Did I miss something in the process?

 

 

apt-get install mmdvm-bridge

Reading package lists... Done

Building dependency tree

Reading state information... Done

E: Unable to locate package mmdvm-bridge

 

 

Walter/K5WH

 

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> On Behalf Of Russell, KV4S
Sent: Monday, October 28, 2019 2:00 PM
To: main@dvswitch.groups.io
Subject: Re: [DVSwitch] DVSwitch

 

As root
cd /tmp
 
wget http://dvswitch.org/install-dvswitch-repo
chmod +x install-dvswitch-repo
./install-dvswitch-repo
apt-get update
 
apt-get install mmdvm-bridge
then go by the guide for ini.
https://dvswitch.groups.io/g/main/wiki/Bridge-DMR-to-YSF-Narrow
systemctl enable mmdvm_bridge
systemctl start mmdvm_bridge
if you need to see the logs: 
cd /var/log/mmdvm
 
 
for the most recent log file in that folder and sub the name for the *
 
tail -f "*.log" 

 

On Mon, Oct 28, 2019 at 1:48 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:

All you need is mmdvm_bridge and this guide:

 

On Sun, Oct 27, 2019, 6:54 PM Walter Holmes K5WH <walterh@...> wrote:

Steve,

 

If I am understanding DVSwitch correctly, it appears there may be a couple ways to do some things from what I have seen.

 

I am specifically looking for the simplest way to bridge a DMR talkgroup to a YSF reflector.

 

Is there a way to run the MMDVM_Bridge separately?  Or something else? 

 

Or do you have to install the DVSwitch software as a base, before the bridge or other components can be used?

 

Many thanks for all the great work you’re doing with this.

 

Walter/K5WH


Re: DVSwitch

K4VL
 

I'm new to this so indulge me.
How do I get a YSF reflector address?
What port do I use?
Do I need to redirect that port in my router to my Pi?

Virus-free. www.avg.com

On Mon, Oct 28, 2019 at 3:28 PM Walter Holmes K5WH <walterh@...> wrote:

Ahh, gotcha…

 

I failed to notice that the GatewayAddress=ysfreflector.dvswitch.org line, as that needs to point to my YSFreflector address.

 

Thanks a ton for the help on that..

 

 

Walter/K5WH

 

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> On Behalf Of Russell, KV4S
Sent: Monday, October 28, 2019 2:33 PM
To: main@dvswitch.groups.io
Subject: Re: [DVSwitch] DVSwitch

 

note you may need to log into the brandmeister.network for the repeater id you used and make the talkgroup static.

 

On Mon, Oct 28, 2019 at 2:31 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:

[System Fusion Network]
Enable=1
LocalAddress=0
LocalPort=3200
GatewayAddress=ysfreflector.dvswitch.org
GatewayPort=42166

Debug=0
  

 

On Mon, Oct 28, 2019 at 2:30 PM Russell Thomas <russelljthomas@...> wrote:

that is located in the  MMDVM_Bridge.ini in the same folder.

 

On Mon, Oct 28, 2019 at 2:10 PM Walter Holmes K5WH <walterh@...> wrote:

Many thanks for that Russell.

 

I think I see in the file where to put the DMR talkgroup, which appears to be the ExportTG field.

 

But where do I put the YSF Reflector name/number?

 

[YSF]

Address = 127.0.0.1      ; Address to send AMBE TLV frames to (export)

TXPort = 31103             ; Port to send AMBE TLV frames to (export)

RXPort = 31100             ; Port to listen on (import)

FallbackID = 1234567   ; In case we can not find a valid DMR id in the database, export this one

ExportTG = 1234           ; Which TG to export

Slot = 2                          ; Export slot

 

 

Thnaks,

Walter/K5WH

 

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> On Behalf Of Russell, KV4S
Sent: Monday, October 28, 2019 1:49 PM
To: main@dvswitch.groups.io
Subject: Re: [DVSwitch] DVSwitch

 

All you need is mmdvm_bridge and this guide:

 

On Sun, Oct 27, 2019, 6:54 PM Walter Holmes K5WH <walterh@...> wrote:

Steve,

 

If I am understanding DVSwitch correctly, it appears there may be a couple ways to do some things from what I have seen.

 

I am specifically looking for the simplest way to bridge a DMR talkgroup to a YSF reflector.

 

Is there a way to run the MMDVM_Bridge separately?  Or something else? 

 

Or do you have to install the DVSwitch software as a base, before the bridge or other components can be used?

 

Many thanks for all the great work you’re doing with this.

 

Walter/K5WH


Virus-free. www.avg.com


Re: DVSwitch

Walter Holmes K5WH
 

Ahh, gotcha…

 

I failed to notice that the GatewayAddress=ysfreflector.dvswitch.org line, as that needs to point to my YSFreflector address.

 

Thanks a ton for the help on that..

 

 

Walter/K5WH

 

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> On Behalf Of Russell, KV4S
Sent: Monday, October 28, 2019 2:33 PM
To: main@dvswitch.groups.io
Subject: Re: [DVSwitch] DVSwitch

 

note you may need to log into the brandmeister.network for the repeater id you used and make the talkgroup static.

 

On Mon, Oct 28, 2019 at 2:31 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:

[System Fusion Network]
Enable=1
LocalAddress=0
LocalPort=3200
GatewayAddress=ysfreflector.dvswitch.org
GatewayPort=42166

Debug=0
  

 

On Mon, Oct 28, 2019 at 2:30 PM Russell Thomas <russelljthomas@...> wrote:

that is located in the  MMDVM_Bridge.ini in the same folder.

 

On Mon, Oct 28, 2019 at 2:10 PM Walter Holmes K5WH <walterh@...> wrote:

Many thanks for that Russell.

 

I think I see in the file where to put the DMR talkgroup, which appears to be the ExportTG field.

 

But where do I put the YSF Reflector name/number?

 

[YSF]

Address = 127.0.0.1      ; Address to send AMBE TLV frames to (export)

TXPort = 31103             ; Port to send AMBE TLV frames to (export)

RXPort = 31100             ; Port to listen on (import)

FallbackID = 1234567   ; In case we can not find a valid DMR id in the database, export this one

ExportTG = 1234           ; Which TG to export

Slot = 2                          ; Export slot

 

 

Thnaks,

Walter/K5WH

 

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> On Behalf Of Russell, KV4S
Sent: Monday, October 28, 2019 1:49 PM
To: main@dvswitch.groups.io
Subject: Re: [DVSwitch] DVSwitch

 

All you need is mmdvm_bridge and this guide:

 

On Sun, Oct 27, 2019, 6:54 PM Walter Holmes K5WH <walterh@...> wrote:

Steve,

 

If I am understanding DVSwitch correctly, it appears there may be a couple ways to do some things from what I have seen.

 

I am specifically looking for the simplest way to bridge a DMR talkgroup to a YSF reflector.

 

Is there a way to run the MMDVM_Bridge separately?  Or something else? 

 

Or do you have to install the DVSwitch software as a base, before the bridge or other components can be used?

 

Many thanks for all the great work you’re doing with this.

 

Walter/K5WH


Re: DVSwitch

 

note you may need to log into the brandmeister.network for the repeater id you used and make the talkgroup static.


On Mon, Oct 28, 2019 at 2:31 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
[System Fusion Network]
Enable=1
LocalAddress=0
LocalPort=3200
GatewayAddress=ysfreflector.dvswitch.org
GatewayPort=42166
Debug=0
  

On Mon, Oct 28, 2019 at 2:30 PM Russell Thomas <russelljthomas@...> wrote:
that is located in the  MMDVM_Bridge.ini in the same folder.

On Mon, Oct 28, 2019 at 2:10 PM Walter Holmes K5WH <walterh@...> wrote:

Many thanks for that Russell.

 

I think I see in the file where to put the DMR talkgroup, which appears to be the ExportTG field.

 

But where do I put the YSF Reflector name/number?

 

[YSF]

Address = 127.0.0.1      ; Address to send AMBE TLV frames to (export)

TXPort = 31103             ; Port to send AMBE TLV frames to (export)

RXPort = 31100             ; Port to listen on (import)

FallbackID = 1234567   ; In case we can not find a valid DMR id in the database, export this one

ExportTG = 1234           ; Which TG to export

Slot = 2                          ; Export slot

 

 

Thnaks,

Walter/K5WH

 

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> On Behalf Of Russell, KV4S
Sent: Monday, October 28, 2019 1:49 PM
To: main@dvswitch.groups.io
Subject: Re: [DVSwitch] DVSwitch

 

All you need is mmdvm_bridge and this guide:

 

On Sun, Oct 27, 2019, 6:54 PM Walter Holmes K5WH <walterh@...> wrote:

Steve,

 

If I am understanding DVSwitch correctly, it appears there may be a couple ways to do some things from what I have seen.

 

I am specifically looking for the simplest way to bridge a DMR talkgroup to a YSF reflector.

 

Is there a way to run the MMDVM_Bridge separately?  Or something else? 

 

Or do you have to install the DVSwitch software as a base, before the bridge or other components can be used?

 

Many thanks for all the great work you’re doing with this.

 

Walter/K5WH


Re: DVSwitch

 

[System Fusion Network]
Enable=1
LocalAddress=0
LocalPort=3200
GatewayAddress=ysfreflector.dvswitch.org
GatewayPort=42166
Debug=0
  

On Mon, Oct 28, 2019 at 2:30 PM Russell Thomas <russelljthomas@...> wrote:
that is located in the  MMDVM_Bridge.ini in the same folder.

On Mon, Oct 28, 2019 at 2:10 PM Walter Holmes K5WH <walterh@...> wrote:

Many thanks for that Russell.

 

I think I see in the file where to put the DMR talkgroup, which appears to be the ExportTG field.

 

But where do I put the YSF Reflector name/number?

 

[YSF]

Address = 127.0.0.1      ; Address to send AMBE TLV frames to (export)

TXPort = 31103             ; Port to send AMBE TLV frames to (export)

RXPort = 31100             ; Port to listen on (import)

FallbackID = 1234567   ; In case we can not find a valid DMR id in the database, export this one

ExportTG = 1234           ; Which TG to export

Slot = 2                          ; Export slot

 

 

Thnaks,

Walter/K5WH

 

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> On Behalf Of Russell, KV4S
Sent: Monday, October 28, 2019 1:49 PM
To: main@dvswitch.groups.io
Subject: Re: [DVSwitch] DVSwitch

 

All you need is mmdvm_bridge and this guide:

 

On Sun, Oct 27, 2019, 6:54 PM Walter Holmes K5WH <walterh@...> wrote:

Steve,

 

If I am understanding DVSwitch correctly, it appears there may be a couple ways to do some things from what I have seen.

 

I am specifically looking for the simplest way to bridge a DMR talkgroup to a YSF reflector.

 

Is there a way to run the MMDVM_Bridge separately?  Or something else? 

 

Or do you have to install the DVSwitch software as a base, before the bridge or other components can be used?

 

Many thanks for all the great work you’re doing with this.

 

Walter/K5WH


Re: DVSwitch

 

that is located in the  MMDVM_Bridge.ini in the same folder.


On Mon, Oct 28, 2019 at 2:10 PM Walter Holmes K5WH <walterh@...> wrote:

Many thanks for that Russell.

 

I think I see in the file where to put the DMR talkgroup, which appears to be the ExportTG field.

 

But where do I put the YSF Reflector name/number?

 

[YSF]

Address = 127.0.0.1      ; Address to send AMBE TLV frames to (export)

TXPort = 31103             ; Port to send AMBE TLV frames to (export)

RXPort = 31100             ; Port to listen on (import)

FallbackID = 1234567   ; In case we can not find a valid DMR id in the database, export this one

ExportTG = 1234           ; Which TG to export

Slot = 2                          ; Export slot

 

 

Thnaks,

Walter/K5WH

 

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> On Behalf Of Russell, KV4S
Sent: Monday, October 28, 2019 1:49 PM
To: main@dvswitch.groups.io
Subject: Re: [DVSwitch] DVSwitch

 

All you need is mmdvm_bridge and this guide:

 

On Sun, Oct 27, 2019, 6:54 PM Walter Holmes K5WH <walterh@...> wrote:

Steve,

 

If I am understanding DVSwitch correctly, it appears there may be a couple ways to do some things from what I have seen.

 

I am specifically looking for the simplest way to bridge a DMR talkgroup to a YSF reflector.

 

Is there a way to run the MMDVM_Bridge separately?  Or something else? 

 

Or do you have to install the DVSwitch software as a base, before the bridge or other components can be used?

 

Many thanks for all the great work you’re doing with this.

 

Walter/K5WH


Re: DVSwitch

Walter Holmes K5WH
 

Many thanks for that Russell.

 

I think I see in the file where to put the DMR talkgroup, which appears to be the ExportTG field.

 

But where do I put the YSF Reflector name/number?

 

[YSF]

Address = 127.0.0.1      ; Address to send AMBE TLV frames to (export)

TXPort = 31103             ; Port to send AMBE TLV frames to (export)

RXPort = 31100             ; Port to listen on (import)

FallbackID = 1234567   ; In case we can not find a valid DMR id in the database, export this one

ExportTG = 1234           ; Which TG to export

Slot = 2                          ; Export slot

 

 

Thnaks,

Walter/K5WH

 

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> On Behalf Of Russell, KV4S
Sent: Monday, October 28, 2019 1:49 PM
To: main@dvswitch.groups.io
Subject: Re: [DVSwitch] DVSwitch

 

All you need is mmdvm_bridge and this guide:

 

On Sun, Oct 27, 2019, 6:54 PM Walter Holmes K5WH <walterh@...> wrote:

Steve,

 

If I am understanding DVSwitch correctly, it appears there may be a couple ways to do some things from what I have seen.

 

I am specifically looking for the simplest way to bridge a DMR talkgroup to a YSF reflector.

 

Is there a way to run the MMDVM_Bridge separately?  Or something else? 

 

Or do you have to install the DVSwitch software as a base, before the bridge or other components can be used?

 

Many thanks for all the great work you’re doing with this.

 

Walter/K5WH


Re: DVSwitch

 

As root
cd /tmp

wget http://dvswitch.org/install-dvswitch-repo
chmod +x install-dvswitch-repo
./install-dvswitch-repo
apt-get update

apt-get install mmdvm-bridge
then go by the guide for ini.
https://dvswitch.groups.io/g/main/wiki/Bridge-DMR-to-YSF-Narrow
systemctl enable mmdvm_bridge
systemctl start mmdvm_bridge
if you need to see the logs: 
cd /var/log/mmdvm


for the most recent log file in that folder and sub the name for the *

tail -f "*.log" 


On Mon, Oct 28, 2019 at 1:48 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
All you need is mmdvm_bridge and this guide:

On Sun, Oct 27, 2019, 6:54 PM Walter Holmes K5WH <walterh@...> wrote:

Steve,

 

If I am understanding DVSwitch correctly, it appears there may be a couple ways to do some things from what I have seen.

 

I am specifically looking for the simplest way to bridge a DMR talkgroup to a YSF reflector.

 

Is there a way to run the MMDVM_Bridge separately?  Or something else? 

 

Or do you have to install the DVSwitch software as a base, before the bridge or other components can be used?

 

Many thanks for all the great work you’re doing with this.

 

Walter/K5WH


Re: DVSwitch

 

All you need is mmdvm_bridge and this guide:

On Sun, Oct 27, 2019, 6:54 PM Walter Holmes K5WH <walterh@...> wrote:

Steve,

 

If I am understanding DVSwitch correctly, it appears there may be a couple ways to do some things from what I have seen.

 

I am specifically looking for the simplest way to bridge a DMR talkgroup to a YSF reflector.

 

Is there a way to run the MMDVM_Bridge separately?  Or something else? 

 

Or do you have to install the DVSwitch software as a base, before the bridge or other components can be used?

 

Many thanks for all the great work you’re doing with this.

 

Walter/K5WH


Re: using ambed with DVSwitch

Patrick Perdue
 

OK. I'll just throw another dongle on a Pi then. Thanks.


On 10/28/2019 12:03 PM, Steve N4IRS wrote:
Patrick,
Analog_Bridge does not support ambed. Just ambeserver or direct connect.

Sent by smoke signal (AT&T)


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Patrick Perdue <patrick@...>
Sent: Monday, October 28, 2019 11:54:34 AM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: [DVSwitch] using ambed with DVSwitch
 
Hi:

I'm setting up a bm > ASL bridge with MD380_emu for now. I have a box
with two ThumbDV dongles connected via ambed to my XLX reflector, which
has an existing bridge to Brandmeister.

DVSwitch is set up for AMBEserver, not ambed. Are the protocols the
same? Can I just add a third dongle and point Analog_Bridge at my
existing ambed, or should I run AMBEserver as well? If so, assuming I
want to run it on the same box, how would I make sure ambed doesn't grab
all of the dongles, so that one is reserved with use for AMBEserver?

Thanks and 73:

KE4DYI





Re: using ambed with DVSwitch

Steve N4IRS
 

Patrick,
Analog_Bridge does not support ambed. Just ambeserver or direct connect.

Sent by smoke signal (AT&T)


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Patrick Perdue <patrick@...>
Sent: Monday, October 28, 2019 11:54:34 AM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: [DVSwitch] using ambed with DVSwitch
 
Hi:

I'm setting up a bm > ASL bridge with MD380_emu for now. I have a box
with two ThumbDV dongles connected via ambed to my XLX reflector, which
has an existing bridge to Brandmeister.

DVSwitch is set up for AMBEserver, not ambed. Are the protocols the
same? Can I just add a third dongle and point Analog_Bridge at my
existing ambed, or should I run AMBEserver as well? If so, assuming I
want to run it on the same box, how would I make sure ambed doesn't grab
all of the dongles, so that one is reserved with use for AMBEserver?

Thanks and 73:

KE4DYI





using ambed with DVSwitch

Patrick Perdue
 

Hi:

I'm setting up a bm > ASL bridge with MD380_emu for now. I have a box with two ThumbDV dongles connected via ambed to my XLX reflector, which has an existing bridge to Brandmeister.

DVSwitch is set up for AMBEserver, not ambed. Are the protocols the same? Can I just add a third dongle and point Analog_Bridge at my existing ambed, or should I run AMBEserver as well? If so, assuming I want to run it on the same box, how would I make sure ambed doesn't grab all of the dongles, so that one is reserved with use for AMBEserver?

Thanks and 73:

KE4DYI


Re: MMDVM_Bridge segfaulting on RPi 1B with Debian Buster

Steve N4IRS
 

That was the other reason I built for armv6

On 10/28/2019 10:12 AM, Waldek SP2ONG wrote:
Steve

Thank you for version armv6 and now I can run MMDVM_Bridge/Analog_Bridge on Raspberry Pi ZERO W with Raspbian.

73 Waldek


Re: MMDVM_Bridge segfaulting on RPi 1B with Debian Buster

SP2ONG Waldek
 

Steve

Thank you for version armv6 and now I can run MMDVM_Bridge/Analog_Bridge on Raspberry Pi ZERO W with Raspbian.

73 Waldek


Re: MMDVM_Bridge segfaulting on RPi 1B with Debian Buster

Florian Wolters
 

Hi Steve,

I have built MMDVM_Bridge on a Pi 1. (armv6l) Give it a try on your 1B
oh, I didn't expect that to happen so I ordered a RPi2B on Friday :)
I will give it a try on the RPi1B and report.

mni tnx es vy73 de Florian DF2ET


DVSwitch

Walter Holmes K5WH
 

Steve,

 

If I am understanding DVSwitch correctly, it appears there may be a couple ways to do some things from what I have seen.

 

I am specifically looking for the simplest way to bridge a DMR talkgroup to a YSF reflector.

 

Is there a way to run the MMDVM_Bridge separately?  Or something else? 

 

Or do you have to install the DVSwitch software as a base, before the bridge or other components can be used?

 

Many thanks for all the great work you’re doing with this.

 

Walter/K5WH


Re: MMDVM_Bridge segfaulting on RPi 1B with Debian Buster

Steve N4IRS
 

I have built Analog_Bridge on a Pi 1 (armv6l)
It is in the github repository at <https://github.com/DVSwitch/Analog_Bridge>

73, Steve N4IRS

4161 - 4180 of 9219