Date   

Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge

 

Sorry my mistake  looked what I typed. It logs fine. Connects to 4000 first then goes to 4005. If there is no traffic it disconnects then reconnects. Looks like it needs a command to stay connected. All seen when debug is switched on.


From: Adrian <vk4tux@...>
Sent: Friday, November 8, 2019 7:23:16 AM
To: Ernest Pratt <erniepratt@...>; main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 

Ernest, So it is set 4005, but targets 4500 ? Have you tried another module number to compare ?

On 8/11/19 4:52 pm, Ernest Pratt wrote:
Options=XLX:4005


From: Adrian <vk4tux@...>
Sent: Thursday, November 7, 2019 9:21:10 PM
To: Ernest Pratt <erniepratt@...>; main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 

Ernest, What is your Option config ?

On 8/11/19 3:09 am, Ernest Pratt wrote:
Mb logs in with tg=4000 then sends tg=4500


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Ernie Gm7kbk <erniepratt@...>
Sent: Thursday, November 7, 2019 5:04:32 PM
To: Adrian <vk4tux@...>; main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 
MB connects and will pass traffic. Then drops  with connection  to the master has timed out. Then reconnects.




Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge

 

Options=XLX:4005


From: Adrian <vk4tux@...>
Sent: Thursday, November 7, 2019 9:21:10 PM
To: Ernest Pratt <erniepratt@...>; main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 

Ernest, What is your Option config ?

On 8/11/19 3:09 am, Ernest Pratt wrote:
Mb logs in with tg=4000 then sends tg=4500


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Ernie Gm7kbk <erniepratt@...>
Sent: Thursday, November 7, 2019 5:04:32 PM
To: Adrian <vk4tux@...>; main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 
MB connects and will pass traffic. Then drops  with connection  to the master has timed out. Then reconnects.


From: Adrian <vk4tux@...>
Sent: Thursday, November 7, 2019 4:24:26 PM
To: Ernest Pratt <erniepratt@...>; main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 

Ok, on that, it appears to connect in two stages running a disconnect , then target ;

I: 2019-11-07 16:21:07.842 Starting M: 2019-11-07 16:21:26.821 DMR, Logged into the master successfully
M: 2019-11-07 16:21:26.821 DMR, Remote CMD: txTg=4000
M: 2019-11-07 16:21:26.821 DMR, Tune: id=5054444, tg=4000, mode=Group
M: 2019-11-07 16:21:26.822 DMR, Remote CMD: txTg=4017


On 8/11/19 1:37 am, Ernest Pratt wrote:
Thanks  Adrian.Will update to night.


From: Adrian <vk4tux@...>
Sent: Thursday, November 7, 2019 3:27:43 PM
To: Ernest Pratt <erniepratt@...>; main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 

Confirming V1.4 does work direct with XLX here. No DMRGateway needed.

On 8/11/19 1:21 am, Ernie Gm7kbk wrote:
At work at moment, will download in one hour  and test.


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Thursday, November 7, 2019 3:05:10 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 
Are you running the latest MMDVM_Bridge from github? I posted the latest 2 days ago.

On 11/7/2019 10:03 AM, Ernie Gm7kbk wrote:
I tried the other day to connect directly to my xlx server, and could not. Connected via hblink3 instead.  Mb says it connected but xlx  does not see the connection.


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Thursday, November 7, 2019 2:39:56 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 
David,
Yes the latest MMDVM_Bridge in github has all the current fixes. Please let me know your results.

Steve N4IRS

On 11/7/2019 9:35 AM, davidchien0327 via Groups.Io wrote:
Hi Steve and Mike

my i know the latest vesion of MMDVM Bridge had fix the problem that can not connect select XLX DMR module ? i am wait for it to bridge BM DMR to XLX DMR module
thanks



Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge

Adrian Fewster <vk4tux@...>
 

Ernest, What is your Option config ?

On 8/11/19 3:09 am, Ernest Pratt wrote:
Mb logs in with tg=4000 then sends tg=4500


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Ernie Gm7kbk <erniepratt@...>
Sent: Thursday, November 7, 2019 5:04:32 PM
To: Adrian <vk4tux@...>; main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 
MB connects and will pass traffic. Then drops  with connection  to the master has timed out. Then reconnects.


From: Adrian <vk4tux@...>
Sent: Thursday, November 7, 2019 4:24:26 PM
To: Ernest Pratt <erniepratt@...>; main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 

Ok, on that, it appears to connect in two stages running a disconnect , then target ;

I: 2019-11-07 16:21:07.842 Starting M: 2019-11-07 16:21:26.821 DMR, Logged into the master successfully
M: 2019-11-07 16:21:26.821 DMR, Remote CMD: txTg=4000
M: 2019-11-07 16:21:26.821 DMR, Tune: id=5054444, tg=4000, mode=Group
M: 2019-11-07 16:21:26.822 DMR, Remote CMD: txTg=4017


On 8/11/19 1:37 am, Ernest Pratt wrote:
Thanks  Adrian.Will update to night.


From: Adrian <vk4tux@...>
Sent: Thursday, November 7, 2019 3:27:43 PM
To: Ernest Pratt <erniepratt@...>; main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 

Confirming V1.4 does work direct with XLX here. No DMRGateway needed.

On 8/11/19 1:21 am, Ernie Gm7kbk wrote:
At work at moment, will download in one hour  and test.


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Thursday, November 7, 2019 3:05:10 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 
Are you running the latest MMDVM_Bridge from github? I posted the latest 2 days ago.

On 11/7/2019 10:03 AM, Ernie Gm7kbk wrote:
I tried the other day to connect directly to my xlx server, and could not. Connected via hblink3 instead.  Mb says it connected but xlx  does not see the connection.


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Thursday, November 7, 2019 2:39:56 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 
David,
Yes the latest MMDVM_Bridge in github has all the current fixes. Please let me know your results.

Steve N4IRS

On 11/7/2019 9:35 AM, davidchien0327 via Groups.Io wrote:
Hi Steve and Mike

my i know the latest vesion of MMDVM Bridge had fix the problem that can not connect select XLX DMR module ? i am wait for it to bridge BM DMR to XLX DMR module
thanks



Re: Linking DMR to Echolink

Dexter Harroo
 

Thanks Tito


On Thu, Nov 7, 2019 at 2:40 AM Tito Lopez <OBUSTOS01@...> wrote:
I recently setup an ASL node in the cloud with the procedures from that link. It works fine if you take the time to tune it up. Lots of fun linking up those 3 systems. 73's

On Wed, Nov 6, 2019, 8:54 PM Patrick Perdue <patrick@...> wrote:

You can setup EchoLink in ASL, then use the USRP driver as described to bridge using ASL, Analog_Bridge and MMDVM_Bridge. My advice, don't. EchoLink over DMR and vice versa sounds horrible, especially with the MD380-emu vocoder. It's not much better with a hardware dongle. The GSM codec of EchoLink, plus the levels all over the place make it a pretty substandard experience, both on analog and digitally, but especially digital. I have recently had to ban nodes from my bridge who connected EchoLink, because it was generating bad noises on digital modes, and didn't sound much better on analog. When the object is to communicate, and that isn't possible due to layers of artifacts due to clipping and transcoding *before* going to DMR, etc.

But, if you really want to do this, see this post for setting up a bridge between DMR and ASL.

https://docs.google.com/document/d/1eN50Csr29eAprBu7eKA0Bfa2XUcsXw5iktY1Ey-Qjkg

and this for configuring EchoLink on ASL:

https://wiki.allstarlink.org/wiki/Echolink_Channel_Driver

You'll need an EchoLink -l node number before configuring anything.


On 11/6/2019 10:52 PM, Dexter Harroo wrote:

Hi Guys, 
Don't know if this has been asked before. is there any software in the group that i can use to link lets say DMR to Echolink? if there is i am willing to give it a go.



--
73
De 9Y4C
Dexter Harroo


Re: Linking DMR to Echolink

Dexter Harroo
 

Thanks Patrick, I will check it out, 


On Thu, Nov 7, 2019 at 12:54 AM Patrick Perdue <patrick@...> wrote:

You can setup EchoLink in ASL, then use the USRP driver as described to bridge using ASL, Analog_Bridge and MMDVM_Bridge. My advice, don't. EchoLink over DMR and vice versa sounds horrible, especially with the MD380-emu vocoder. It's not much better with a hardware dongle. The GSM codec of EchoLink, plus the levels all over the place make it a pretty substandard experience, both on analog and digitally, but especially digital. I have recently had to ban nodes from my bridge who connected EchoLink, because it was generating bad noises on digital modes, and didn't sound much better on analog. When the object is to communicate, and that isn't possible due to layers of artifacts due to clipping and transcoding *before* going to DMR, etc.

But, if you really want to do this, see this post for setting up a bridge between DMR and ASL.

https://docs.google.com/document/d/1eN50Csr29eAprBu7eKA0Bfa2XUcsXw5iktY1Ey-Qjkg

and this for configuring EchoLink on ASL:

https://wiki.allstarlink.org/wiki/Echolink_Channel_Driver

You'll need an EchoLink -l node number before configuring anything.


On 11/6/2019 10:52 PM, Dexter Harroo wrote:

Hi Guys, 
Don't know if this has been asked before. is there any software in the group that i can use to link lets say DMR to Echolink? if there is i am willing to give it a go.



--
73
De 9Y4C
Dexter Harroo


Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge

 

Mb logs in with tg=4000 then sends tg=4500


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Ernie Gm7kbk <erniepratt@...>
Sent: Thursday, November 7, 2019 5:04:32 PM
To: Adrian <vk4tux@...>; main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 
MB connects and will pass traffic. Then drops  with connection  to the master has timed out. Then reconnects.


From: Adrian <vk4tux@...>
Sent: Thursday, November 7, 2019 4:24:26 PM
To: Ernest Pratt <erniepratt@...>; main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 

Ok, on that, it appears to connect in two stages running a disconnect , then target ;

I: 2019-11-07 16:21:07.842 Starting M: 2019-11-07 16:21:26.821 DMR, Logged into the master successfully
M: 2019-11-07 16:21:26.821 DMR, Remote CMD: txTg=4000
M: 2019-11-07 16:21:26.821 DMR, Tune: id=5054444, tg=4000, mode=Group
M: 2019-11-07 16:21:26.822 DMR, Remote CMD: txTg=4017


On 8/11/19 1:37 am, Ernest Pratt wrote:
Thanks  Adrian.Will update to night.


From: Adrian <vk4tux@...>
Sent: Thursday, November 7, 2019 3:27:43 PM
To: Ernest Pratt <erniepratt@...>; main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 

Confirming V1.4 does work direct with XLX here. No DMRGateway needed.

On 8/11/19 1:21 am, Ernie Gm7kbk wrote:
At work at moment, will download in one hour  and test.


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Thursday, November 7, 2019 3:05:10 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 
Are you running the latest MMDVM_Bridge from github? I posted the latest 2 days ago.

On 11/7/2019 10:03 AM, Ernie Gm7kbk wrote:
I tried the other day to connect directly to my xlx server, and could not. Connected via hblink3 instead.  Mb says it connected but xlx  does not see the connection.


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Thursday, November 7, 2019 2:39:56 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 
David,
Yes the latest MMDVM_Bridge in github has all the current fixes. Please let me know your results.

Steve N4IRS

On 11/7/2019 9:35 AM, davidchien0327 via Groups.Io wrote:
Hi Steve and Mike

my i know the latest vesion of MMDVM Bridge had fix the problem that can not connect select XLX DMR module ? i am wait for it to bridge BM DMR to XLX DMR module
thanks



Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge

Steve N4IRS
 

Ernie,

Can you give me the IP, Port and password to the XLX reflector you are testing with?

Steve N4IRS


On 11/7/2019 12:04 PM, Ernie Gm7kbk wrote:
MB connects and will pass traffic. Then drops  with connection  to the master has timed out. Then reconnects.


From: Adrian <vk4tux@...>
Sent: Thursday, November 7, 2019 4:24:26 PM
To: Ernest Pratt <erniepratt@...>; main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 

Ok, on that, it appears to connect in two stages running a disconnect , then target ;

I: 2019-11-07 16:21:07.842 Starting M: 2019-11-07 16:21:26.821 DMR, Logged into the master successfully
M: 2019-11-07 16:21:26.821 DMR, Remote CMD: txTg=4000
M: 2019-11-07 16:21:26.821 DMR, Tune: id=5054444, tg=4000, mode=Group
M: 2019-11-07 16:21:26.822 DMR, Remote CMD: txTg=4017


On 8/11/19 1:37 am, Ernest Pratt wrote:
Thanks  Adrian.Will update to night.


From: Adrian <vk4tux@...>
Sent: Thursday, November 7, 2019 3:27:43 PM
To: Ernest Pratt <erniepratt@...>; main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 

Confirming V1.4 does work direct with XLX here. No DMRGateway needed.

On 8/11/19 1:21 am, Ernie Gm7kbk wrote:
At work at moment, will download in one hour  and test.


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Thursday, November 7, 2019 3:05:10 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 
Are you running the latest MMDVM_Bridge from github? I posted the latest 2 days ago.

On 11/7/2019 10:03 AM, Ernie Gm7kbk wrote:
I tried the other day to connect directly to my xlx server, and could not. Connected via hblink3 instead.  Mb says it connected but xlx  does not see the connection.


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Thursday, November 7, 2019 2:39:56 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 
David,
Yes the latest MMDVM_Bridge in github has all the current fixes. Please let me know your results.

Steve N4IRS

On 11/7/2019 9:35 AM, davidchien0327 via Groups.Io wrote:
Hi Steve and Mike

my i know the latest vesion of MMDVM Bridge had fix the problem that can not connect select XLX DMR module ? i am wait for it to bridge BM DMR to XLX DMR module
thanks




Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge

 

MB connects and will pass traffic. Then drops  with connection  to the master has timed out. Then reconnects.


From: Adrian <vk4tux@...>
Sent: Thursday, November 7, 2019 4:24:26 PM
To: Ernest Pratt <erniepratt@...>; main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 

Ok, on that, it appears to connect in two stages running a disconnect , then target ;

I: 2019-11-07 16:21:07.842 Starting M: 2019-11-07 16:21:26.821 DMR, Logged into the master successfully
M: 2019-11-07 16:21:26.821 DMR, Remote CMD: txTg=4000
M: 2019-11-07 16:21:26.821 DMR, Tune: id=5054444, tg=4000, mode=Group
M: 2019-11-07 16:21:26.822 DMR, Remote CMD: txTg=4017


On 8/11/19 1:37 am, Ernest Pratt wrote:
Thanks  Adrian.Will update to night.


From: Adrian <vk4tux@...>
Sent: Thursday, November 7, 2019 3:27:43 PM
To: Ernest Pratt <erniepratt@...>; main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 

Confirming V1.4 does work direct with XLX here. No DMRGateway needed.

On 8/11/19 1:21 am, Ernie Gm7kbk wrote:
At work at moment, will download in one hour  and test.


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Thursday, November 7, 2019 3:05:10 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 
Are you running the latest MMDVM_Bridge from github? I posted the latest 2 days ago.

On 11/7/2019 10:03 AM, Ernie Gm7kbk wrote:
I tried the other day to connect directly to my xlx server, and could not. Connected via hblink3 instead.  Mb says it connected but xlx  does not see the connection.


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Thursday, November 7, 2019 2:39:56 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 
David,
Yes the latest MMDVM_Bridge in github has all the current fixes. Please let me know your results.

Steve N4IRS

On 11/7/2019 9:35 AM, davidchien0327 via Groups.Io wrote:
Hi Steve and Mike

my i know the latest vesion of MMDVM Bridge had fix the problem that can not connect select XLX DMR module ? i am wait for it to bridge BM DMR to XLX DMR module
thanks



Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge

Adrian Fewster <vk4tux@...>
 

Ok, on that, it appears to connect in two stages running a disconnect , then target ;

I: 2019-11-07 16:21:07.842 Starting M: 2019-11-07 16:21:26.821 DMR, Logged into the master successfully
M: 2019-11-07 16:21:26.821 DMR, Remote CMD: txTg=4000
M: 2019-11-07 16:21:26.821 DMR, Tune: id=5054444, tg=4000, mode=Group
M: 2019-11-07 16:21:26.822 DMR, Remote CMD: txTg=4017


On 8/11/19 1:37 am, Ernest Pratt wrote:
Thanks  Adrian.Will update to night.


From: Adrian <vk4tux@...>
Sent: Thursday, November 7, 2019 3:27:43 PM
To: Ernest Pratt <erniepratt@...>; main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 

Confirming V1.4 does work direct with XLX here. No DMRGateway needed.

On 8/11/19 1:21 am, Ernie Gm7kbk wrote:
At work at moment, will download in one hour  and test.


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Thursday, November 7, 2019 3:05:10 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 
Are you running the latest MMDVM_Bridge from github? I posted the latest 2 days ago.

On 11/7/2019 10:03 AM, Ernie Gm7kbk wrote:
I tried the other day to connect directly to my xlx server, and could not. Connected via hblink3 instead.  Mb says it connected but xlx  does not see the connection.


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Thursday, November 7, 2019 2:39:56 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 
David,
Yes the latest MMDVM_Bridge in github has all the current fixes. Please let me know your results.

Steve N4IRS

On 11/7/2019 9:35 AM, davidchien0327 via Groups.Io wrote:
Hi Steve and Mike

my i know the latest vesion of MMDVM Bridge had fix the problem that can not connect select XLX DMR module ? i am wait for it to bridge BM DMR to XLX DMR module
thanks



Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge

 

Thanks  Adrian.Will update to night.


From: Adrian <vk4tux@...>
Sent: Thursday, November 7, 2019 3:27:43 PM
To: Ernest Pratt <erniepratt@...>; main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 

Confirming V1.4 does work direct with XLX here. No DMRGateway needed.

On 8/11/19 1:21 am, Ernie Gm7kbk wrote:
At work at moment, will download in one hour  and test.


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Thursday, November 7, 2019 3:05:10 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 
Are you running the latest MMDVM_Bridge from github? I posted the latest 2 days ago.

On 11/7/2019 10:03 AM, Ernie Gm7kbk wrote:
I tried the other day to connect directly to my xlx server, and could not. Connected via hblink3 instead.  Mb says it connected but xlx  does not see the connection.


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Thursday, November 7, 2019 2:39:56 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 
David,
Yes the latest MMDVM_Bridge in github has all the current fixes. Please let me know your results.

Steve N4IRS

On 11/7/2019 9:35 AM, davidchien0327 via Groups.Io wrote:
Hi Steve and Mike

my i know the latest vesion of MMDVM Bridge had fix the problem that can not connect select XLX DMR module ? i am wait for it to bridge BM DMR to XLX DMR module
thanks



Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge

Adrian Fewster <vk4tux@...>
 

Confirming V1.4 does work direct with XLX here. No DMRGateway needed.

On 8/11/19 1:21 am, Ernie Gm7kbk wrote:
At work at moment, will download in one hour  and test.


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Thursday, November 7, 2019 3:05:10 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 
Are you running the latest MMDVM_Bridge from github? I posted the latest 2 days ago.

On 11/7/2019 10:03 AM, Ernie Gm7kbk wrote:
I tried the other day to connect directly to my xlx server, and could not. Connected via hblink3 instead.  Mb says it connected but xlx  does not see the connection.


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Thursday, November 7, 2019 2:39:56 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 
David,
Yes the latest MMDVM_Bridge in github has all the current fixes. Please let me know your results.

Steve N4IRS

On 11/7/2019 9:35 AM, davidchien0327 via Groups.Io wrote:
Hi Steve and Mike

my i know the latest vesion of MMDVM Bridge had fix the problem that can not connect select XLX DMR module ? i am wait for it to bridge BM DMR to XLX DMR module
thanks



Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge

 

At work at moment, will download in one hour  and test.


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Thursday, November 7, 2019 3:05:10 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 
Are you running the latest MMDVM_Bridge from github? I posted the latest 2 days ago.

On 11/7/2019 10:03 AM, Ernie Gm7kbk wrote:
I tried the other day to connect directly to my xlx server, and could not. Connected via hblink3 instead.  Mb says it connected but xlx  does not see the connection.


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Thursday, November 7, 2019 2:39:56 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 
David,
Yes the latest MMDVM_Bridge in github has all the current fixes. Please let me know your results.

Steve N4IRS

On 11/7/2019 9:35 AM, davidchien0327 via Groups.Io wrote:
Hi Steve and Mike

my i know the latest vesion of MMDVM Bridge had fix the problem that can not connect select XLX DMR module ? i am wait for it to bridge BM DMR to XLX DMR module
thanks



Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge

Steve N4IRS
 

Are you running the latest MMDVM_Bridge from github? I posted the latest 2 days ago.

On 11/7/2019 10:03 AM, Ernie Gm7kbk wrote:
I tried the other day to connect directly to my xlx server, and could not. Connected via hblink3 instead.  Mb says it connected but xlx  does not see the connection.


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Thursday, November 7, 2019 2:39:56 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 
David,
Yes the latest MMDVM_Bridge in github has all the current fixes. Please let me know your results.

Steve N4IRS

On 11/7/2019 9:35 AM, davidchien0327 via Groups.Io wrote:
Hi Steve and Mike

my i know the latest vesion of MMDVM Bridge had fix the problem that can not connect select XLX DMR module ? i am wait for it to bridge BM DMR to XLX DMR module
thanks



Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge

 

I tried the other day to connect directly to my xlx server, and could not. Connected via hblink3 instead.  Mb says it connected but xlx  does not see the connection.


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Thursday, November 7, 2019 2:39:56 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 
David,
Yes the latest MMDVM_Bridge in github has all the current fixes. Please let me know your results.

Steve N4IRS

On 11/7/2019 9:35 AM, davidchien0327 via Groups.Io wrote:
Hi Steve and Mike

my i know the latest vesion of MMDVM Bridge had fix the problem that can not connect select XLX DMR module ? i am wait for it to bridge BM DMR to XLX DMR module
thanks


Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge

Steve N4IRS
 

David,
Yes the latest MMDVM_Bridge in github has all the current fixes. Please let me know your results.

Steve N4IRS

On 11/7/2019 9:35 AM, davidchien0327 via Groups.Io wrote:
Hi Steve and Mike

my i know the latest vesion of MMDVM Bridge had fix the problem that can not connect select XLX DMR module ? i am wait for it to bridge BM DMR to XLX DMR module
thanks


Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge

David
 

Hi Steve and Mike

my i know the latest vesion of MMDVM Bridge had fix the problem that can not connect select XLX DMR module ? i am wait for it to bridge BM DMR to XLX DMR module
thanks


Re: BrandMeister to XLX

David
 

Hi N0KEG

may i know any update .i just see all of posts of this topic  and the doc write by Steve KC1AWV but still confused .
if i just whant to bradge DMR TG to XLX dmr module .as i understood as below item 1 right ?

1.BM<->DMRGateway_BM<->MMDVM_Bridge_BM<->MMDVM_Bridge_XLX<->DMRGateway_XLX<->XLXD
 or item 2 ?
2.BM<->DMRGateway_BM<->MMDVM_Bridge_BM<->MMDVM_Bridge_XLX<->XLXD
and 3 i need to follow doc to do rewite TG ??

thanks


IPSC-bridge Dmrlink and HBlink3: help for how to #dmrlink #best_practices #hblink

Alex IK7SEC
 

Hi all,
 
i'd like to connect our Hblink3 to some Motorola repeaters.
Here i'd like to share what I think to have understooded to check if is it right and\or what I should do to get my goal.
I think this post could be usefull to make and edit a Wiki about it. 
 
I apologize for the large number of questions in one post.
 
So, these are my notes (please correct and review it):
 
System should be configured in this way:
 
Prerequisites/ Starting points: Hblink3 fully working (with dmr_utils3 installed too)
 
 
Moto Rpt <---> dmrlink <--> IPSC_link <--> Hblink3<--> Rest of Wolrld  
ip   ip
port   port
password   password
 
1) #download packets
git clone -b HB_Bridge https://github.com/n0mjs710/HBlink.git   (it will make a dir /hblnk)
git clone -b IPSC_Bridge https://github.com/n0mjs710/DMRlink.git
 
2) installing dmrlnk\Ipsc_bridge ./mk-dmrlink  After that is it necessary or usefull merge dmr_link directory with dmr:link3 ???
installing Hb_bridge... How? Is it self executing without any kind of installation? Or is  it simply necessary merge Hblink3 with this hblink?
 
3) Configure dmrlink: which are main config files? IPSC_bridge.cfg? dmrlink.cfg?
Configure HB_bridge: which are main config files (can we use only hblink3 configs?)
 
4) Executing dmrlink alone for testing: $ sudo python3 dmrlink.py  ????? IPSC_bridge.py ??? Both of these? None of these?
Stop dmrlink
Executing Hb_bridge alone for testing: $ sudo python3 .....bridge.py ???? (which is executable file from HB_Bridge)
 
Thank you in advance for yours tips and tricks.
 


Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge

SP2ONG Waldek
 

Steve and Mike

I checked the latest version of MMDVM_Bridge v1.4 and replaced the YSF <-> XLX connection with the YSF2DMR for the versions with MMDVM_Bridge to connect the YSF Reflector with the XLX reflector on the selected module and it looks like it works.


Re: Linking DMR to Echolink

Tito Lopez - YN1OB
 

I recently setup an ASL node in the cloud with the procedures from that link. It works fine if you take the time to tune it up. Lots of fun linking up those 3 systems. 73's


On Wed, Nov 6, 2019, 8:54 PM Patrick Perdue <patrick@...> wrote:

You can setup EchoLink in ASL, then use the USRP driver as described to bridge using ASL, Analog_Bridge and MMDVM_Bridge. My advice, don't. EchoLink over DMR and vice versa sounds horrible, especially with the MD380-emu vocoder. It's not much better with a hardware dongle. The GSM codec of EchoLink, plus the levels all over the place make it a pretty substandard experience, both on analog and digitally, but especially digital. I have recently had to ban nodes from my bridge who connected EchoLink, because it was generating bad noises on digital modes, and didn't sound much better on analog. When the object is to communicate, and that isn't possible due to layers of artifacts due to clipping and transcoding *before* going to DMR, etc.

But, if you really want to do this, see this post for setting up a bridge between DMR and ASL.

https://docs.google.com/document/d/1eN50Csr29eAprBu7eKA0Bfa2XUcsXw5iktY1Ey-Qjkg

and this for configuring EchoLink on ASL:

https://wiki.allstarlink.org/wiki/Echolink_Channel_Driver

You'll need an EchoLink -l node number before configuring anything.


On 11/6/2019 10:52 PM, Dexter Harroo wrote:

Hi Guys, 
Don't know if this has been asked before. is there any software in the group that i can use to link lets say DMR to Echolink? if there is i am willing to give it a go.

4401 - 4420 of 9528