Date   

Re: Brandmeister to XLX

Patrick Perdue
 

Oh yes, I forgot to mention that the MMDVM_Bridge is in its own directory with different rx and tx ports in DVSwitch.ini to avoid conflict with the existing bridge.


On Nov 30, 2019, at 16:49, Steve N4IRS <szingman@...> wrote:


See Ernie's reply AND since you are running 2 copies of MB, change the local post on one of them

Sent by smoke signal (AT&T)


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Patrick Perdue <patrick@...>
Sent: Saturday, November 30, 2019 4:37:24 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] Brandmeister to XLX
 

I downloaded the latest MMDVM_Bridge earlier today. My current issue is getting MMDVM-Bridge connected to XLXD on the same machine. I'm sure I've directly connected a hotspot to the reflector before, but that was a while ago.

The relevant part of MMDVM_Bridge.ini looks like this:


[DMR Network]
Enable=1
Address=127.0.0.1
Port=62030
Jitter=360
Local=62031
Password=passw0rd
Options=XLX:4002
Slot1=0
Slot2=1
Debug=0


Small part of the MMDVM_Bridge log:

E: 2019-11-30 21:34:28.884 DMR, Connection to the master has timed out, retrying connection

tcpdump shows active connections on UDP 62030, so XLXD should be accepting the connection from MMDVM_Bridge on that port.


On 11/30/2019 4:20 PM, Ernie Gm7kbk wrote:
latest version of MMDVM_bridge works with no problems. Use the options XLX:4005 this being the module you want to connect to. 4001 for A 4002 for B etc. latest version is here https://github.com/DVSwitch/MMDVM_Bridge


Re: Brandmeister to XLX

Patrick Perdue
 

That was actually the first configuration I tried. Same result either with the Interface IP address, or local loopback. I’ll mess with it some more later. The MMDVM_Bridge part looks easy enough once I can get it talking to XLXD.


On Nov 30, 2019, at 16:39, Ernie Gm7kbk <erniepratt@...> wrote:


Use the ip address  of the machine not 127.0.0.1


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Patrick Perdue <patrick@...>
Sent: Saturday, November 30, 2019 9:37:24 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] Brandmeister to XLX
 

I downloaded the latest MMDVM_Bridge earlier today. My current issue is getting MMDVM-Bridge connected to XLXD on the same machine. I'm sure I've directly connected a hotspot to the reflector before, but that was a while ago.

The relevant part of MMDVM_Bridge.ini looks like this:


[DMR Network]
Enable=1
Address=127.0.0.1
Port=62030
Jitter=360
Local=62031
Password=passw0rd
Options=XLX:4002
Slot1=0
Slot2=1
Debug=0


Small part of the MMDVM_Bridge log:

E: 2019-11-30 21:34:28.884 DMR, Connection to the master has timed out, retrying connection

tcpdump shows active connections on UDP 62030, so XLXD should be accepting the connection from MMDVM_Bridge on that port.


On 11/30/2019 4:20 PM, Ernie Gm7kbk wrote:
latest version of MMDVM_bridge works with no problems. Use the options XLX:4005 this being the module you want to connect to. 4001 for A 4002 for B etc. latest version is here https://github.com/DVSwitch/MMDVM_Bridge


Re: Brandmeister to XLX

Steve N4IRS
 

See Ernie's reply AND since you are running 2 copies of MB, change the local post on one of them

Sent by smoke signal (AT&T)


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Patrick Perdue <patrick@...>
Sent: Saturday, November 30, 2019 4:37:24 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] Brandmeister to XLX
 

I downloaded the latest MMDVM_Bridge earlier today. My current issue is getting MMDVM-Bridge connected to XLXD on the same machine. I'm sure I've directly connected a hotspot to the reflector before, but that was a while ago.

The relevant part of MMDVM_Bridge.ini looks like this:


[DMR Network]
Enable=1
Address=127.0.0.1
Port=62030
Jitter=360
Local=62031
Password=passw0rd
Options=XLX:4002
Slot1=0
Slot2=1
Debug=0


Small part of the MMDVM_Bridge log:

E: 2019-11-30 21:34:28.884 DMR, Connection to the master has timed out, retrying connection

tcpdump shows active connections on UDP 62030, so XLXD should be accepting the connection from MMDVM_Bridge on that port.


On 11/30/2019 4:20 PM, Ernie Gm7kbk wrote:
latest version of MMDVM_bridge works with no problems. Use the options XLX:4005 this being the module you want to connect to. 4001 for A 4002 for B etc. latest version is here https://github.com/DVSwitch/MMDVM_Bridge


Re: Brandmeister to XLX

 

Use the ip address  of the machine not 127.0.0.1


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Patrick Perdue <patrick@...>
Sent: Saturday, November 30, 2019 9:37:24 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] Brandmeister to XLX
 

I downloaded the latest MMDVM_Bridge earlier today. My current issue is getting MMDVM-Bridge connected to XLXD on the same machine. I'm sure I've directly connected a hotspot to the reflector before, but that was a while ago.

The relevant part of MMDVM_Bridge.ini looks like this:


[DMR Network]
Enable=1
Address=127.0.0.1
Port=62030
Jitter=360
Local=62031
Password=passw0rd
Options=XLX:4002
Slot1=0
Slot2=1
Debug=0


Small part of the MMDVM_Bridge log:

E: 2019-11-30 21:34:28.884 DMR, Connection to the master has timed out, retrying connection

tcpdump shows active connections on UDP 62030, so XLXD should be accepting the connection from MMDVM_Bridge on that port.


On 11/30/2019 4:20 PM, Ernie Gm7kbk wrote:
latest version of MMDVM_bridge works with no problems. Use the options XLX:4005 this being the module you want to connect to. 4001 for A 4002 for B etc. latest version is here https://github.com/DVSwitch/MMDVM_Bridge


Re: Brandmeister to XLX

Patrick Perdue
 

I downloaded the latest MMDVM_Bridge earlier today. My current issue is getting MMDVM-Bridge connected to XLXD on the same machine. I'm sure I've directly connected a hotspot to the reflector before, but that was a while ago.

The relevant part of MMDVM_Bridge.ini looks like this:


[DMR Network]
Enable=1
Address=127.0.0.1
Port=62030
Jitter=360
Local=62031
Password=passw0rd
Options=XLX:4002
Slot1=0
Slot2=1
Debug=0


Small part of the MMDVM_Bridge log:

E: 2019-11-30 21:34:28.884 DMR, Connection to the master has timed out, retrying connection

tcpdump shows active connections on UDP 62030, so XLXD should be accepting the connection from MMDVM_Bridge on that port.


On 11/30/2019 4:20 PM, Ernie Gm7kbk wrote:
latest version of MMDVM_bridge works with no problems. Use the options XLX:4005 this being the module you want to connect to. 4001 for A 4002 for B etc. latest version is here https://github.com/DVSwitch/MMDVM_Bridge


Re: Brandmeister to XLX

 

latest version of MMDVM_bridge works with no problems. Use the options XLX:4005 this being the module you want to connect to. 4001 for A 4002 for B etc. latest version is here https://github.com/DVSwitch/MMDVM_Bridge


Re: Brandmeister to XLX

Patrick Perdue
 

OK.

I just tried setting up an instance of MMDVM_Bridge to point to 127.0.0.1 on port 62030 (MMDVM) using the DMRNetwork. I thought XLXD responded to that, but apparently it doesn't, as the connection timed out.


On 11/30/2019 2:57 PM, Steve KC1AWV wrote:
DMRGateway is not required. I have made a note in my old doc that reflects this. I will be creating a new doc that should be available after the holidays.

Steve KC1AWV 

On Sat, Nov 30, 2019, 2:55 PM Patrick Perdue <patrick@...> wrote:
Hello:

I found an old docc referring to using two instances of MMDVM_Bridge and
DMRGateway to bridge DMR to XLX. Is this necessary anymore, or can we
now just use two instances of MMDVM_Bridge, since it seems you can now
specifically address XLX modules? I want to use XLX and ambed for
transcoding DMR to D-STAR (DCS via XLXD) since this is already in place,
and bridge between that and Brandmeister.





Re: Linking dmrlink and HBlink3 #dmrlink #hblink

Cort N0MJS <n0mjs@...>
 

PLEASE TAKE NOTICE:

We have asked this many time. If you intend to ask for help, the following are absolutely mandatory. The people who write the software will not supply help if you do not:

* Include the explicit names of the programs you’re running and how they’re connected. This isn’t “HBlink3” it’s probably bridge.py, probably not DMRlink, but IPSC_Bridge.py
* Include copied of configuration files, rule files, etc. The files, or the text NO SCREENSHOTS
* Include any pertinent, tracebacks (errors) and/or log files
* NO SCREENSHOTS

From this moment on, I will not offer or even respond to requests for help if these things are not included. Period.

On Nov 30, 2019, at 3:06 PM, ai6bx via Groups.Io <ai6bx.keith@...> wrote:

I have DMRlink configured and running with a bridge to a Motorola master as well as two peer moto DMR machines linked to a master instance I have built within DMRlink. I also have HBlink3 installed with a master for my hotspot. This seems to be running as well with no errors. As I have no interest at this point in linking to Brandmeister, I have not built an OpenBridge or built out the Repeater-1 profile so both are set to false. I can see my hotspot keying and can also see activity in the logfiles for DMRlink. What I am not seeing is traffic passing between the two. It feels like I am missing a stanza in the .cfg files or a bridge activating somewhere. 

Any pointers would be appreciated.

--
Cort Buffington
H: +1-785-813-1501
M: +1-785-865-7206






Linking dmrlink and HBlink3 #dmrlink #hblink

ai6bx
 

I have DMRlink configured and running with a bridge to a Motorola master as well as two peer moto DMR machines linked to a master instance I have built within DMRlink. I also have HBlink3 installed with a master for my hotspot. This seems to be running as well with no errors. As I have no interest at this point in linking to Brandmeister, I have not built an OpenBridge or built out the Repeater-1 profile so both are set to false. I can see my hotspot keying and can also see activity in the logfiles for DMRlink. What I am not seeing is traffic passing between the two. It feels like I am missing a stanza in the .cfg files or a bridge activating somewhere. 

Any pointers would be appreciated.


Re: mmdvmb.service in amd64?

Tom Corcoran
 

Dropped full path and now all is working as intended. Cloud instance of DVS supporting YSF, P25 and DMR (BM, TGIF and QRM).

tnx for help .-- Tom VE3NY


Re: Brandmeister to XLX

Steve KC1AWV
 

DMRGateway is not required. I have made a note in my old doc that reflects this. I will be creating a new doc that should be available after the holidays.

Steve KC1AWV 

On Sat, Nov 30, 2019, 2:55 PM Patrick Perdue <patrick@...> wrote:
Hello:

I found an old docc referring to using two instances of MMDVM_Bridge and
DMRGateway to bridge DMR to XLX. Is this necessary anymore, or can we
now just use two instances of MMDVM_Bridge, since it seems you can now
specifically address XLX modules? I want to use XLX and ambed for
transcoding DMR to D-STAR (DCS via XLXD) since this is already in place,
and bridge between that and Brandmeister.





Brandmeister to XLX

Patrick Perdue
 

Hello:

I found an old docc referring to using two instances of MMDVM_Bridge and DMRGateway to bridge DMR to XLX. Is this necessary anymore, or can we now just use two instances of MMDVM_Bridge, since it seems you can now specifically address XLX modules? I want to use XLX and ambed for transcoding DMR to D-STAR (DCS via XLXD) since this is already in place, and bridge between that and Brandmeister.


Re: mmdvmb.service in amd64?

Steve N4IRS
 

You don't need the full path
systemctl status mmdvm_bridge
systemctl start mmdvm_bridge
ststemctl stop mmdvm_bridge
systemctl enable mmdvm_bridge

What is the result of systemctl status mmdvm_bridge?
what is the result (not just it did not work) of systemctl start mmdvm_bridge?
what is the result of ls /lib/systemd/system/mmdvm_bridge.service?



On 11/30/19 7:28 AM, Tom Corcoran wrote:

I have tried 
systemctl restart /lib/systemd/system/mmdvm_bridge.service

as well as 
/lib/systemd/system/mmdvm_bridge.service restart

and system doesn't restart to reset the MMDVM_Bridge.ini file. Macro makes the change but does not restart. Am I missing something?

tnx ... Tom VE3NY


Re: mmdvmb.service in amd64?

Tom Corcoran
 


I have tried 
systemctl restart /lib/systemd/system/mmdvm_bridge.service

as well as 
/lib/systemd/system/mmdvm_bridge.service restart

and system doesn't restart to reset the MMDVM_Bridge.ini file. Macro makes the change but does not restart. Am I missing something?

tnx ... Tom VE3NY


Re: Dvswitch software not running on Odroid N2

Steve N4IRS
 

Ernie,
Thanks for trying them out.

Steve

On 11/30/19 5:08 AM, Ernie Gm7kbk wrote:
Hello Steve
Working fine on Odroid N2 running Ubuntu.

Thanks


Re: Dvswitch software not running on Odroid N2

 

Hello Steve
Working fine on Odroid N2 running Ubuntu.

Thanks


Re: mmdvmb.service in amd64?

Steve N4IRS
 

I'm going to guess you want mmdvm_bridge.service it is in /lib/systemd/system
That being said, you should not need to touch the service file. Just rename MMDVM_Bridge.amd64 to MMDVM_Bridge

Steve N4IRS

On 11/29/19 7:14 PM, Tom Corcoran wrote:
I can graze on winscp, but please ... where is file?
--
Tom VE3NY


Re: mmdvmb.service in amd64?

Tom Corcoran
 

I can graze on winscp, but please ... where is file?
--
Tom VE3NY


Re: Dvswitch software not running on Odroid N2

Steve N4IRS
 

I now have a board that will do aarch64 (arm64) I bought a RPi4 and I'm running Ubuntu 19.10 on it.
I have pushed MMDVM_Bridge.arm64 and Analog_Bridge.arm64 to GitHub.
I will build the other support programs over the next few days. The ONLY testing I did was to make sure the executables ran. I will be doing full testing as I build the support programs.

73, Steve N4IRS 


Re: mmdvmb.service in amd64?

jim.lathan@...
 

Try the command in terminal, if it returns without go for it

On Fri, Nov 29, 2019 at 5:17 PM Tom Corcoran <tcorcoran@...> wrote:
tnx for speedy response .

so, instead of my macro ending with "restart mmdvmb.service" should I use "restart MMDVM_Bridge" ?
--
Tom VE3NY

3801 - 3820 of 9151