Date   

Re: DVSwitch XLX C4FM (YSF)

Adrian Fewster <vk4tux@...>
 

All it does is auto connect a nominated module to the YSF client on first connect.

Without this feature you can connect to XLX (seen in repeaters/nodes) in limbo with no module allocated until a radio wires-x request is done to do so from the client system,

Once done, then in comms with that module and seen in users/modules.

On 11/1/20 7:48 am, Eric-K6KWB wrote:
Adrian,
Is this supposed to be enable all the time what ever the circumstances is? Or only for wires-x? Sorry guys I know its not a DVS question : )
#define YSF_AUTOLINK_ENABLE             1                                   // 1 = enable, 0 = disable auto-link
thanks, Eric


Re: DVSwitch XLX C4FM (YSF)

Eric-K6KWB
 

Adrian,
Is this supposed to be enable all the time what ever the circumstances is? Or only for wires-x? Sorry guys I know its not a DVS question : )
#define YSF_AUTOLINK_ENABLE             1                                   // 1 = enable, 0 = disable auto-link
thanks, Eric


Re: Hytera DMR Gateway

Adrian Fewster <vk4tux@...>
 

Try

sudo apt-get install libssl1.0.0 libssl-dev --reinstall


On 11/1/20 5:38 am, Kim-Benjamin Lütkemeier via Groups.Io wrote:
error while loading shared libraries: libcrypto.so.1.0.0: cannot open shared object file


Re: Hytera DMR Gateway

Steve N4IRS
 

On 1/10/2020 2:38 PM, Kim-Benjamin Lütkemeier via Groups.Io wrote:

[Edited Message Follows]

Someone has a solution for this?
./gw_hytera_mmdvm: error while loading shared libraries: libcrypto.so.1.0.0: cannot open shared object file: No such file or directory
I checked with apt but I can't find  libcrypto.so.1.0.0


I Try to install it on a Pi3+ with raspian buster


Re: Hytera DMR Gateway

Kim-Benjamin Lütkemeier
 
Edited

Someone has a solution for this?
./gw_hytera_mmdvm: error while loading shared libraries: libcrypto.so.1.0.0: cannot open shared object file: No such file or directory
I checked with apt but I can't find  libcrypto.so.1.0.0


I Try to install it on a Pi3+ with raspian buster


Re: NXDN to Analog Bridge Error

Ed W8VT
 

That was it. Working great on NXDN now.
Thanks Steve.

Ed W8VT


Re: NXDN to Analog Bridge Error

Steve N4IRS
 

Problem is NXDNGateway
Turn off Daemon in NXDNGateway.ini

On 1/10/2020 9:55 AM, Ed W8VT wrote:
Get this error when starting NXDNGateway:
Could not get the mmdvm user, exiting
What exactly does this indicate? MMDVM_Bridge working fine on DMR, YSF and DSTAR.

Thanks,
Ed W8VT


NXDN to Analog Bridge Error

Ed W8VT
 

Get this error when starting NXDNGateway:
Could not get the mmdvm user, exiting
What exactly does this indicate? MMDVM_Bridge working fine on DMR, YSF and DSTAR.

Thanks,
Ed W8VT


Re: nee help set up ysf to dmr and fusion

Eric-K6KWB
 

Raul,
For YSF to DMR you only need one instance of MMDVM_Bridge looks like this:

DMR<->mmdvm_bridge<->YSF

73, Eric


Re: nee help set up ysf to dmr and fusion

 

Raul,

I'm not sure about the repeater as I don't run one and i'm not familiar with fusion.

This is a great guide to bridge DMR and YSF: https://dvswitch.groups.io/g/main/wiki/Bridge-DMR-to-YSF-Narrow

I've heard the simplest way to bridge wires x with a ysf reflector is to use the original openspot connected to the YSF reflector and it's frequency set to the simplex frequency of the wires x node radio.

On Tue, Jan 7, 2020 at 9:14 PM Raul cruz <rcw3023@...> wrote:
Hi  need help  how to set up  the dvswich  to link YSF to dmr  and fusion repeater  with raspberry 3+  or 4+  
anyone has the steps how set it up  

any help will be appreciated 


Re: DVSwitch XLX C4FM (YSF)

Bruno
 

Hello Andrian,
Thank you for your response, I already use this default configuration for the Y module on the XLX425 (YSF-France.fr).
If there is no possibility from the DVSwitch to change the module it does not matter. With C4FM radio sets, you can change XLX modules. Thank you for the info.
 
My best wishes to all.
73's
F1PTL Bruno


Re: DVSwitch XLX C4FM (YSF)

Adrian Fewster <vk4tux@...>
 

It is not possible to determine the YSF connect module from any external system, other than radio wires-x function, with no YSFGateway in the connect path.,

i.e direct connect from mmdvmhost., such that xlxd can read the wires-x traffic.

The default module connect is defined in main.h with autolink enabled in xlxd src.

#define YSF_AUTOLINK_ENABLE             1                                   // 1 = enable, 0 = disable auto-link
#define YSF_AUTOLINK_MODULE             'D'

Any YSF connection traffic is immediately converted to DMR within xlxd, and two xlxd YSF connects cannot transfer data (incl GPS) to each other.


Adrian ... vk4tux


On 8/1/20 7:02 pm, Bruno wrote:
Hi,
Version 2.3.4 of the XLX server offers the possibility of connecting to the XLX server in C4FM YSF mode. With the DVSwitch we have the possibility to connect with the XLX server. How after the connection move through the modules that make up the XLX.
Module A, B, C, D, etc ...
There is a command to pass to change the module with the DVSwitch. Maybe a macro to position in dvsm.macro.
 
Thank you for your answers
Good work on all of the developments, well done to all.

73's
F1PTL Bruno
--
 


DVSwitch XLX C4FM (YSF)

Bruno
 

Hi,
Version 2.3.4 of the XLX server offers the possibility of connecting to the XLX server in C4FM YSF mode. With the DVSwitch we have the possibility to connect with the XLX server. How after the connection move through the modules that make up the XLX.
Module A, B, C, D, etc ...
There is a command to pass to change the module with the DVSwitch. Maybe a macro to position in dvsm.macro.
 
Thank you for your answers
Good work on all of the developments, well done to all.

73's
F1PTL Bruno
--
 


nee help set up ysf to dmr and fusion

Raul cruz <rcw3023@...>
 

Hi  need help  how to set up  the dvswich  to link YSF to dmr  and fusion repeater  with raspberry 3+  or 4+  
anyone has the steps how set it up  

any help will be appreciated 


Re: Error code help #dmrlink

KK4zmg
 

It was solved by turning off authentication. The machine connects to a raspberry pi within the network that converts it to mmdvm to the main hblink server. So the authentication was a little redundant.

In the future may play with it again but right now everything is working.

On Sun, Jan 5, 2020, 7:36 PM ai6bx via Groups.Io <ai6bx.keith=verizon.net@groups.io> wrote:
Richard,

Did you make any progress on solving this? I took a bit of a break on my project over the holidays and am stepping back in. I noticed Cort's comment about a potential firmware glitch so took a look at several of my 8300 machines as I have firmware ranging from 2.03 to 2.09, one of the latest versions before they jumped to the new CPS system. I do see this on the 2.09 machine and not on the 2.03 version. I may try to drop back on the firmware to see if that resolves the issue on that unit.

Keith - AI6BX


Re: Error code help #dmrlink

ai6bx
 

Richard,

Did you make any progress on solving this? I took a bit of a break on my project over the holidays and am stepping back in. I noticed Cort's comment about a potential firmware glitch so took a look at several of my 8300 machines as I have firmware ranging from 2.03 to 2.09, one of the latest versions before they jumped to the new CPS system. I do see this on the 2.09 machine and not on the 2.03 version. I may try to drop back on the firmware to see if that resolves the issue on that unit.

Keith - AI6BX


Re: DVSwitch Server instructions refresh

Steve N4IRS
 

Joe is reworking the pdf as we speak. Just about all the scripting has been replaced with dvswitch.sh

On 1/5/20 12:49 PM, Alec-N1AJW wrote:
all the scripts found in https://dvswitch.groups.io/g/Mobile/files/Mobile%20DVSwitch%200725.pdf   "404 error cant be found"  They are probably incorporated in newer versions now?  

Alec
N1AJW


Re: DVSwitch Server instructions refresh

Alec-N1AJW
 

all the scripts found in https://dvswitch.groups.io/g/Mobile/files/Mobile%20DVSwitch%200725.pdf   "404 error cant be found"  They are probably incorporated in newer versions now?  

Alec
N1AJW


Re: Rebuilding the Node

Steve N4IRS
 

Tito,
What do you mean DVSwitch is not running. There is no program called DVSwitch.
You should run each program in the foreground to watch the output in real time while you transmit.

Steve

On 1/3/20 6:40 PM, Tito Lopez wrote:
I need some help on this, major brain flatulence. cant get this to work. ASL - YSF
Looks like DVSwitch not running
any trust worthy friendly helper want to help out?


Re: Rebuilding the Node

Tito Lopez - YN1OB
 

I need some help on this, major brain flatulence. cant get this to work. ASL - YSF
Looks like DVSwitch not running
any trust worthy friendly helper want to help out?

4061 - 4080 of 9775