Date   

Re: Error code help #dmrlink

KK4zmg
 

It was solved by turning off authentication. The machine connects to a raspberry pi within the network that converts it to mmdvm to the main hblink server. So the authentication was a little redundant.

In the future may play with it again but right now everything is working.

On Sun, Jan 5, 2020, 7:36 PM ai6bx via Groups.Io <ai6bx.keith=verizon.net@groups.io> wrote:
Richard,

Did you make any progress on solving this? I took a bit of a break on my project over the holidays and am stepping back in. I noticed Cort's comment about a potential firmware glitch so took a look at several of my 8300 machines as I have firmware ranging from 2.03 to 2.09, one of the latest versions before they jumped to the new CPS system. I do see this on the 2.09 machine and not on the 2.03 version. I may try to drop back on the firmware to see if that resolves the issue on that unit.

Keith - AI6BX


Re: Error code help #dmrlink

ai6bx
 

Richard,

Did you make any progress on solving this? I took a bit of a break on my project over the holidays and am stepping back in. I noticed Cort's comment about a potential firmware glitch so took a look at several of my 8300 machines as I have firmware ranging from 2.03 to 2.09, one of the latest versions before they jumped to the new CPS system. I do see this on the 2.09 machine and not on the 2.03 version. I may try to drop back on the firmware to see if that resolves the issue on that unit.

Keith - AI6BX


Re: DVSwitch Server instructions refresh

Steve N4IRS
 

Joe is reworking the pdf as we speak. Just about all the scripting has been replaced with dvswitch.sh

On 1/5/20 12:49 PM, Alec-N1AJW wrote:
all the scripts found in https://dvswitch.groups.io/g/Mobile/files/Mobile%20DVSwitch%200725.pdf   "404 error cant be found"  They are probably incorporated in newer versions now?  

Alec
N1AJW


Re: DVSwitch Server instructions refresh

Alec-N1AJW
 

all the scripts found in https://dvswitch.groups.io/g/Mobile/files/Mobile%20DVSwitch%200725.pdf   "404 error cant be found"  They are probably incorporated in newer versions now?  

Alec
N1AJW


Re: Rebuilding the Node

Steve N4IRS
 

Tito,
What do you mean DVSwitch is not running. There is no program called DVSwitch.
You should run each program in the foreground to watch the output in real time while you transmit.

Steve

On 1/3/20 6:40 PM, Tito Lopez wrote:
I need some help on this, major brain flatulence. cant get this to work. ASL - YSF
Looks like DVSwitch not running
any trust worthy friendly helper want to help out?


Re: Rebuilding the Node

Tito Lopez - YN1OB
 

I need some help on this, major brain flatulence. cant get this to work. ASL - YSF
Looks like DVSwitch not running
any trust worthy friendly helper want to help out?


DVSwitch Server instructions refresh

 

All,

I don't have the source PDF to update but here is what I did to accomplish updating my DVSwitch Server in the cloud to use the new dvswitch.sh script instead of all the individual ini's and scripts.

Keep in mind since my install is cloud (no usb or spare ambe device) I have not setup Dstar and I don't really use NXDN and P25. I'm am, however, using EA5GVK's image on a PI at my house to play with those modes.

All I use in the cloud is DMR and YSF.

Good luck I hope you find it helpful:

DVSwitch Mobile
Installation & Initial Setup
Ubuntu 19.4
1. Install Ubuntu 19.4 in cloud or computer
Note: It is recommended that the server have a static IP address.
2. Login to the server open Terminal and obtain root priviliges.
Run:
sudo -s
3. Install DVSwitch programs:
Run:
cd /tmp
wget http://dvswitch.org/install-dvswitch-repo
chmod +x install-dvswitch-repo
./install-dvswitch-repo
apt-get update
apt-get install dvswitch
4. Download new binaries from Github:
Run:
cd /opt/MMDVM_Bridge
wget -O MMDVM_Bridge https://github.com/DVSwitch/MMDVM_Bridge/raw/master/bin/MMDVM_Bridge.amd64
chmod +x MMDVM_Bridge
cd /opt/Analog_Bridge/
wget -O Analog_Bridge https://github.com/DVSwitch/Analog_Bridge/raw/master/bin/Analog_Bridge.amd64
chmod +x Analog_Bridge
5. Run:
mv Analog_Bridge.ini Analog_Bridge_ini.save
wget https://github.com/DVSwitch/Analog_Bridge/raw/master/Analog_Bridge.ini
wget https://github.com/DVSwitch/Analog_Bridge/raw/master/dvsm.macro
chmod +x dvsm.macro
wget https://github.com/DVSwitch/Analog_Bridge/raw/master/dvswitch.sh
chmod +x dvswitch.sh

6. Install Python:
apt-get install python3
apt-get install python

from here you can continue the steps from the pdf:


Re: YSF List does not update ??

 

awesome, looks like that fixed my issues!!

Thanks Steve, this is truly awesome software!

On Fri, Jan 3, 2020 at 3:35 PM Steve N4IRS <szingman@...> wrote:
apt-get install python

On 1/3/20 4:34 PM, Russell, KV4S wrote:
root@ip-172-31-27-215:/opt/Analog_Bridge_01# apt-get install python3
Reading package lists... Done
Building dependency tree
Reading state information... Done
python3 is already the newest version (3.5.1-3).
The following packages were automatically installed and are no longer required:
  libasyncns0 libjack-jackd2-0 libpulse0 libsoundio-dev libsoundio1 linux-aws-headers-4.4.0-1057
  linux-aws-headers-4.4.0-1060 linux-aws-headers-4.4.0-1061 linux-aws-headers-4.4.0-1062
  linux-aws-headers-4.4.0-1065 linux-aws-headers-4.4.0-1066 linux-aws-headers-4.4.0-1069
  linux-aws-headers-4.4.0-1070 linux-aws-headers-4.4.0-1072 linux-aws-headers-4.4.0-1074
  linux-aws-headers-4.4.0-1075 linux-aws-headers-4.4.0-1077 linux-aws-headers-4.4.0-1079
  linux-aws-headers-4.4.0-1083 linux-aws-headers-4.4.0-1084 linux-aws-headers-4.4.0-1085
  linux-aws-headers-4.4.0-1087 linux-aws-headers-4.4.0-1088 linux-aws-headers-4.4.0-1090
  linux-aws-headers-4.4.0-1092 linux-aws-headers-4.4.0-1094 linux-aws-headers-4.4.0-1096
  linux-headers-4.4.0-1057-aws linux-headers-4.4.0-1060-aws linux-headers-4.4.0-1061-aws
  linux-headers-4.4.0-1062-aws linux-headers-4.4.0-1065-aws linux-headers-4.4.0-1066-aws
  linux-headers-4.4.0-1069-aws linux-headers-4.4.0-1070-aws linux-headers-4.4.0-1072-aws
  linux-headers-4.4.0-1074-aws linux-headers-4.4.0-1075-aws linux-headers-4.4.0-1077-aws
  linux-headers-4.4.0-1079-aws linux-headers-4.4.0-1083-aws linux-headers-4.4.0-1084-aws
  linux-headers-4.4.0-1085-aws linux-headers-4.4.0-1087-aws linux-headers-4.4.0-1088-aws
  linux-headers-4.4.0-1090-aws linux-headers-4.4.0-1092-aws linux-headers-4.4.0-1094-aws
  linux-headers-4.4.0-1096-aws linux-image-4.4.0-1057-aws linux-image-4.4.0-1060-aws
  linux-image-4.4.0-1061-aws linux-image-4.4.0-1062-aws linux-image-4.4.0-1065-aws
  linux-image-4.4.0-1066-aws linux-image-4.4.0-1069-aws linux-image-4.4.0-1070-aws
  linux-image-4.4.0-1072-aws linux-image-4.4.0-1074-aws linux-image-4.4.0-1075-aws
  linux-image-4.4.0-1077-aws linux-image-4.4.0-1079-aws linux-image-4.4.0-1083-aws
  linux-image-4.4.0-1084-aws linux-image-4.4.0-1085-aws linux-image-4.4.0-1087-aws
  linux-image-4.4.0-1088-aws linux-image-4.4.0-1090-aws linux-image-4.4.0-1092-aws
  linux-image-4.4.0-1094-aws linux-image-4.4.0-1096-aws linux-modules-4.4.0-1077-aws
  linux-modules-4.4.0-1079-aws linux-modules-4.4.0-1083-aws linux-modules-4.4.0-1084-aws
  linux-modules-4.4.0-1085-aws linux-modules-4.4.0-1087-aws linux-modules-4.4.0-1088-aws
  linux-modules-4.4.0-1090-aws linux-modules-4.4.0-1092-aws linux-modules-4.4.0-1094-aws
  linux-modules-4.4.0-1096-aws
Use 'sudo apt autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 99 not upgraded.
root@ip-172-31-27-215:/opt/Analog_Bridge_01# /opt/Analog_Bridge_01/dvswitch.sh mode YSF
/opt/Analog_Bridge_01/dvswitch.sh: line 59: python: command not found
Can not find /tmp/ABInfo file, aborting
root@ip-172-31-27-215:/opt/Analog_Bridge_01#

On Fri, Jan 3, 2020 at 3:32 PM Steve N4IRS <szingman@...> wrote:
as root
apt-get install python3
retest

On 1/3/20 4:31 PM, Russell, KV4S wrote:
i attempted this but i'm not sure it means anything may be because i'm running it command line

/opt/Analog_Bridge_01/dvswitch.sh mode YSF
/opt/Analog_Bridge_01/dvswitch.sh: line 59: python: command not found
Can not find /tmp/ABInfo file, aborting


On Fri, Jan 3, 2020 at 3:29 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
hmm it doesn't seem to be changing modes? any idea?
I just have it setup for DMR and YSF.

On Fri, Jan 3, 2020 at 3:03 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
any idea what this means:  Macro result was 256

On Fri, Jan 3, 2020 at 2:50 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
do i run these chmod's?:
chmod +x dvsm.macro
chmod +x dvswitch.sh

On Fri, Jan 3, 2020 at 1:50 PM Steve N4IRS <szingman@...> wrote:
I would get rid of the old scripts since dvswitch.sh does a great deal more then any of the old scripts.
I would suggest you look at the new ini and macro files so you understand how mode switching works (if you need it.)

On 1/3/2020 2:48 PM, Russell, KV4S wrote:
well that sounds easy enough.
so it's ok to delete the old ini's and .sh scripts?
nothing has to change with the mobile app right?

On Fri, Jan 3, 2020 at 12:58 PM Steve N4IRS <szingman@...> wrote:
replace the executable /opt/Analog_Bridge/Analog_Bridge with the correct architecture from <https://github.com/DVSwitch/Analog_Bridge/tree/master/bin>
add the following to /opt/Analog_Bridge from <https://github.com/DVSwitch/Analog_Bridge>
dvswitch.sh
dvsm.macro

Steve N4IRS

On 1/3/2020 1:14 PM, Russell, KV4S wrote:
does anyone have an update/install guide for the updated DVSwitch using the new dvswitch.sh script?

If not can someone spitball it?

On Fri, Jan 3, 2020 at 11:34 AM Steve N4IRS <szingman@...> wrote:

If you are running the current Analog_bridge and dvswitch.sh from github:
With your DVSM connected
As root
cd /opt/Analog_Bridge
./dvswitch.sh collectProcessPushDataFiles

This will update the TG and reflector lists on DVSM.

73, Steve N4IRS

On 1/3/2020 12:29 PM, xmarcelo3@... wrote:
We have set up and configure a new YSF for our group a week ago.

The YSF named US YSF MIAMI is showing on the Pi-Star software list as well in the DV4mini, openSPOT, etc. list.

My question, How long it takes to show on the DVSwitch mobile application?.

Thanks for all the great of this group.
Marcelo/KC4GYB/73's






Re: YSF List does not update ??

Steve N4IRS
 

apt-get install python

On 1/3/20 4:34 PM, Russell, KV4S wrote:
root@ip-172-31-27-215:/opt/Analog_Bridge_01# apt-get install python3
Reading package lists... Done
Building dependency tree
Reading state information... Done
python3 is already the newest version (3.5.1-3).
The following packages were automatically installed and are no longer required:
  libasyncns0 libjack-jackd2-0 libpulse0 libsoundio-dev libsoundio1 linux-aws-headers-4.4.0-1057
  linux-aws-headers-4.4.0-1060 linux-aws-headers-4.4.0-1061 linux-aws-headers-4.4.0-1062
  linux-aws-headers-4.4.0-1065 linux-aws-headers-4.4.0-1066 linux-aws-headers-4.4.0-1069
  linux-aws-headers-4.4.0-1070 linux-aws-headers-4.4.0-1072 linux-aws-headers-4.4.0-1074
  linux-aws-headers-4.4.0-1075 linux-aws-headers-4.4.0-1077 linux-aws-headers-4.4.0-1079
  linux-aws-headers-4.4.0-1083 linux-aws-headers-4.4.0-1084 linux-aws-headers-4.4.0-1085
  linux-aws-headers-4.4.0-1087 linux-aws-headers-4.4.0-1088 linux-aws-headers-4.4.0-1090
  linux-aws-headers-4.4.0-1092 linux-aws-headers-4.4.0-1094 linux-aws-headers-4.4.0-1096
  linux-headers-4.4.0-1057-aws linux-headers-4.4.0-1060-aws linux-headers-4.4.0-1061-aws
  linux-headers-4.4.0-1062-aws linux-headers-4.4.0-1065-aws linux-headers-4.4.0-1066-aws
  linux-headers-4.4.0-1069-aws linux-headers-4.4.0-1070-aws linux-headers-4.4.0-1072-aws
  linux-headers-4.4.0-1074-aws linux-headers-4.4.0-1075-aws linux-headers-4.4.0-1077-aws
  linux-headers-4.4.0-1079-aws linux-headers-4.4.0-1083-aws linux-headers-4.4.0-1084-aws
  linux-headers-4.4.0-1085-aws linux-headers-4.4.0-1087-aws linux-headers-4.4.0-1088-aws
  linux-headers-4.4.0-1090-aws linux-headers-4.4.0-1092-aws linux-headers-4.4.0-1094-aws
  linux-headers-4.4.0-1096-aws linux-image-4.4.0-1057-aws linux-image-4.4.0-1060-aws
  linux-image-4.4.0-1061-aws linux-image-4.4.0-1062-aws linux-image-4.4.0-1065-aws
  linux-image-4.4.0-1066-aws linux-image-4.4.0-1069-aws linux-image-4.4.0-1070-aws
  linux-image-4.4.0-1072-aws linux-image-4.4.0-1074-aws linux-image-4.4.0-1075-aws
  linux-image-4.4.0-1077-aws linux-image-4.4.0-1079-aws linux-image-4.4.0-1083-aws
  linux-image-4.4.0-1084-aws linux-image-4.4.0-1085-aws linux-image-4.4.0-1087-aws
  linux-image-4.4.0-1088-aws linux-image-4.4.0-1090-aws linux-image-4.4.0-1092-aws
  linux-image-4.4.0-1094-aws linux-image-4.4.0-1096-aws linux-modules-4.4.0-1077-aws
  linux-modules-4.4.0-1079-aws linux-modules-4.4.0-1083-aws linux-modules-4.4.0-1084-aws
  linux-modules-4.4.0-1085-aws linux-modules-4.4.0-1087-aws linux-modules-4.4.0-1088-aws
  linux-modules-4.4.0-1090-aws linux-modules-4.4.0-1092-aws linux-modules-4.4.0-1094-aws
  linux-modules-4.4.0-1096-aws
Use 'sudo apt autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 99 not upgraded.
root@ip-172-31-27-215:/opt/Analog_Bridge_01# /opt/Analog_Bridge_01/dvswitch.sh mode YSF
/opt/Analog_Bridge_01/dvswitch.sh: line 59: python: command not found
Can not find /tmp/ABInfo file, aborting
root@ip-172-31-27-215:/opt/Analog_Bridge_01#

On Fri, Jan 3, 2020 at 3:32 PM Steve N4IRS <szingman@...> wrote:
as root
apt-get install python3
retest

On 1/3/20 4:31 PM, Russell, KV4S wrote:
i attempted this but i'm not sure it means anything may be because i'm running it command line

/opt/Analog_Bridge_01/dvswitch.sh mode YSF
/opt/Analog_Bridge_01/dvswitch.sh: line 59: python: command not found
Can not find /tmp/ABInfo file, aborting


On Fri, Jan 3, 2020 at 3:29 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
hmm it doesn't seem to be changing modes? any idea?
I just have it setup for DMR and YSF.

On Fri, Jan 3, 2020 at 3:03 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
any idea what this means:  Macro result was 256

On Fri, Jan 3, 2020 at 2:50 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
do i run these chmod's?:
chmod +x dvsm.macro
chmod +x dvswitch.sh

On Fri, Jan 3, 2020 at 1:50 PM Steve N4IRS <szingman@...> wrote:
I would get rid of the old scripts since dvswitch.sh does a great deal more then any of the old scripts.
I would suggest you look at the new ini and macro files so you understand how mode switching works (if you need it.)

On 1/3/2020 2:48 PM, Russell, KV4S wrote:
well that sounds easy enough.
so it's ok to delete the old ini's and .sh scripts?
nothing has to change with the mobile app right?

On Fri, Jan 3, 2020 at 12:58 PM Steve N4IRS <szingman@...> wrote:
replace the executable /opt/Analog_Bridge/Analog_Bridge with the correct architecture from <https://github.com/DVSwitch/Analog_Bridge/tree/master/bin>
add the following to /opt/Analog_Bridge from <https://github.com/DVSwitch/Analog_Bridge>
dvswitch.sh
dvsm.macro

Steve N4IRS

On 1/3/2020 1:14 PM, Russell, KV4S wrote:
does anyone have an update/install guide for the updated DVSwitch using the new dvswitch.sh script?

If not can someone spitball it?

On Fri, Jan 3, 2020 at 11:34 AM Steve N4IRS <szingman@...> wrote:

If you are running the current Analog_bridge and dvswitch.sh from github:
With your DVSM connected
As root
cd /opt/Analog_Bridge
./dvswitch.sh collectProcessPushDataFiles

This will update the TG and reflector lists on DVSM.

73, Steve N4IRS

On 1/3/2020 12:29 PM, xmarcelo3@... wrote:
We have set up and configure a new YSF for our group a week ago.

The YSF named US YSF MIAMI is showing on the Pi-Star software list as well in the DV4mini, openSPOT, etc. list.

My question, How long it takes to show on the DVSwitch mobile application?.

Thanks for all the great of this group.
Marcelo/KC4GYB/73's






Re: YSF List does not update ??

 

root@ip-172-31-27-215:/opt/Analog_Bridge_01# apt-get install python3
Reading package lists... Done
Building dependency tree
Reading state information... Done
python3 is already the newest version (3.5.1-3).
The following packages were automatically installed and are no longer required:
  libasyncns0 libjack-jackd2-0 libpulse0 libsoundio-dev libsoundio1 linux-aws-headers-4.4.0-1057
  linux-aws-headers-4.4.0-1060 linux-aws-headers-4.4.0-1061 linux-aws-headers-4.4.0-1062
  linux-aws-headers-4.4.0-1065 linux-aws-headers-4.4.0-1066 linux-aws-headers-4.4.0-1069
  linux-aws-headers-4.4.0-1070 linux-aws-headers-4.4.0-1072 linux-aws-headers-4.4.0-1074
  linux-aws-headers-4.4.0-1075 linux-aws-headers-4.4.0-1077 linux-aws-headers-4.4.0-1079
  linux-aws-headers-4.4.0-1083 linux-aws-headers-4.4.0-1084 linux-aws-headers-4.4.0-1085
  linux-aws-headers-4.4.0-1087 linux-aws-headers-4.4.0-1088 linux-aws-headers-4.4.0-1090
  linux-aws-headers-4.4.0-1092 linux-aws-headers-4.4.0-1094 linux-aws-headers-4.4.0-1096
  linux-headers-4.4.0-1057-aws linux-headers-4.4.0-1060-aws linux-headers-4.4.0-1061-aws
  linux-headers-4.4.0-1062-aws linux-headers-4.4.0-1065-aws linux-headers-4.4.0-1066-aws
  linux-headers-4.4.0-1069-aws linux-headers-4.4.0-1070-aws linux-headers-4.4.0-1072-aws
  linux-headers-4.4.0-1074-aws linux-headers-4.4.0-1075-aws linux-headers-4.4.0-1077-aws
  linux-headers-4.4.0-1079-aws linux-headers-4.4.0-1083-aws linux-headers-4.4.0-1084-aws
  linux-headers-4.4.0-1085-aws linux-headers-4.4.0-1087-aws linux-headers-4.4.0-1088-aws
  linux-headers-4.4.0-1090-aws linux-headers-4.4.0-1092-aws linux-headers-4.4.0-1094-aws
  linux-headers-4.4.0-1096-aws linux-image-4.4.0-1057-aws linux-image-4.4.0-1060-aws
  linux-image-4.4.0-1061-aws linux-image-4.4.0-1062-aws linux-image-4.4.0-1065-aws
  linux-image-4.4.0-1066-aws linux-image-4.4.0-1069-aws linux-image-4.4.0-1070-aws
  linux-image-4.4.0-1072-aws linux-image-4.4.0-1074-aws linux-image-4.4.0-1075-aws
  linux-image-4.4.0-1077-aws linux-image-4.4.0-1079-aws linux-image-4.4.0-1083-aws
  linux-image-4.4.0-1084-aws linux-image-4.4.0-1085-aws linux-image-4.4.0-1087-aws
  linux-image-4.4.0-1088-aws linux-image-4.4.0-1090-aws linux-image-4.4.0-1092-aws
  linux-image-4.4.0-1094-aws linux-image-4.4.0-1096-aws linux-modules-4.4.0-1077-aws
  linux-modules-4.4.0-1079-aws linux-modules-4.4.0-1083-aws linux-modules-4.4.0-1084-aws
  linux-modules-4.4.0-1085-aws linux-modules-4.4.0-1087-aws linux-modules-4.4.0-1088-aws
  linux-modules-4.4.0-1090-aws linux-modules-4.4.0-1092-aws linux-modules-4.4.0-1094-aws
  linux-modules-4.4.0-1096-aws
Use 'sudo apt autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 99 not upgraded.
root@ip-172-31-27-215:/opt/Analog_Bridge_01# /opt/Analog_Bridge_01/dvswitch.sh mode YSF
/opt/Analog_Bridge_01/dvswitch.sh: line 59: python: command not found
Can not find /tmp/ABInfo file, aborting
root@ip-172-31-27-215:/opt/Analog_Bridge_01#

On Fri, Jan 3, 2020 at 3:32 PM Steve N4IRS <szingman@...> wrote:
as root
apt-get install python3
retest

On 1/3/20 4:31 PM, Russell, KV4S wrote:
i attempted this but i'm not sure it means anything may be because i'm running it command line

/opt/Analog_Bridge_01/dvswitch.sh mode YSF
/opt/Analog_Bridge_01/dvswitch.sh: line 59: python: command not found
Can not find /tmp/ABInfo file, aborting


On Fri, Jan 3, 2020 at 3:29 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
hmm it doesn't seem to be changing modes? any idea?
I just have it setup for DMR and YSF.

On Fri, Jan 3, 2020 at 3:03 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
any idea what this means:  Macro result was 256

On Fri, Jan 3, 2020 at 2:50 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
do i run these chmod's?:
chmod +x dvsm.macro
chmod +x dvswitch.sh

On Fri, Jan 3, 2020 at 1:50 PM Steve N4IRS <szingman@...> wrote:
I would get rid of the old scripts since dvswitch.sh does a great deal more then any of the old scripts.
I would suggest you look at the new ini and macro files so you understand how mode switching works (if you need it.)

On 1/3/2020 2:48 PM, Russell, KV4S wrote:
well that sounds easy enough.
so it's ok to delete the old ini's and .sh scripts?
nothing has to change with the mobile app right?

On Fri, Jan 3, 2020 at 12:58 PM Steve N4IRS <szingman@...> wrote:
replace the executable /opt/Analog_Bridge/Analog_Bridge with the correct architecture from <https://github.com/DVSwitch/Analog_Bridge/tree/master/bin>
add the following to /opt/Analog_Bridge from <https://github.com/DVSwitch/Analog_Bridge>
dvswitch.sh
dvsm.macro

Steve N4IRS

On 1/3/2020 1:14 PM, Russell, KV4S wrote:
does anyone have an update/install guide for the updated DVSwitch using the new dvswitch.sh script?

If not can someone spitball it?

On Fri, Jan 3, 2020 at 11:34 AM Steve N4IRS <szingman@...> wrote:

If you are running the current Analog_bridge and dvswitch.sh from github:
With your DVSM connected
As root
cd /opt/Analog_Bridge
./dvswitch.sh collectProcessPushDataFiles

This will update the TG and reflector lists on DVSM.

73, Steve N4IRS

On 1/3/2020 12:29 PM, xmarcelo3@... wrote:
We have set up and configure a new YSF for our group a week ago.

The YSF named US YSF MIAMI is showing on the Pi-Star software list as well in the DV4mini, openSPOT, etc. list.

My question, How long it takes to show on the DVSwitch mobile application?.

Thanks for all the great of this group.
Marcelo/KC4GYB/73's





Re: YSF List does not update ??

Steve N4IRS
 

as root
apt-get install python3
retest

On 1/3/20 4:31 PM, Russell, KV4S wrote:
i attempted this but i'm not sure it means anything may be because i'm running it command line

/opt/Analog_Bridge_01/dvswitch.sh mode YSF
/opt/Analog_Bridge_01/dvswitch.sh: line 59: python: command not found
Can not find /tmp/ABInfo file, aborting


On Fri, Jan 3, 2020 at 3:29 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
hmm it doesn't seem to be changing modes? any idea?
I just have it setup for DMR and YSF.

On Fri, Jan 3, 2020 at 3:03 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
any idea what this means:  Macro result was 256

On Fri, Jan 3, 2020 at 2:50 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
do i run these chmod's?:
chmod +x dvsm.macro
chmod +x dvswitch.sh

On Fri, Jan 3, 2020 at 1:50 PM Steve N4IRS <szingman@...> wrote:
I would get rid of the old scripts since dvswitch.sh does a great deal more then any of the old scripts.
I would suggest you look at the new ini and macro files so you understand how mode switching works (if you need it.)

On 1/3/2020 2:48 PM, Russell, KV4S wrote:
well that sounds easy enough.
so it's ok to delete the old ini's and .sh scripts?
nothing has to change with the mobile app right?

On Fri, Jan 3, 2020 at 12:58 PM Steve N4IRS <szingman@...> wrote:
replace the executable /opt/Analog_Bridge/Analog_Bridge with the correct architecture from <https://github.com/DVSwitch/Analog_Bridge/tree/master/bin>
add the following to /opt/Analog_Bridge from <https://github.com/DVSwitch/Analog_Bridge>
dvswitch.sh
dvsm.macro

Steve N4IRS

On 1/3/2020 1:14 PM, Russell, KV4S wrote:
does anyone have an update/install guide for the updated DVSwitch using the new dvswitch.sh script?

If not can someone spitball it?

On Fri, Jan 3, 2020 at 11:34 AM Steve N4IRS <szingman@...> wrote:

If you are running the current Analog_bridge and dvswitch.sh from github:
With your DVSM connected
As root
cd /opt/Analog_Bridge
./dvswitch.sh collectProcessPushDataFiles

This will update the TG and reflector lists on DVSM.

73, Steve N4IRS

On 1/3/2020 12:29 PM, xmarcelo3@... wrote:
We have set up and configure a new YSF for our group a week ago.

The YSF named US YSF MIAMI is showing on the Pi-Star software list as well in the DV4mini, openSPOT, etc. list.

My question, How long it takes to show on the DVSwitch mobile application?.

Thanks for all the great of this group.
Marcelo/KC4GYB/73's





Re: YSF List does not update ??

Steve N4IRS
 

What macro did you run?

On 1/3/20 4:29 PM, Russell, KV4S wrote:
hmm it doesn't seem to be changing modes? any idea?
I just have it setup for DMR and YSF.

On Fri, Jan 3, 2020 at 3:03 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
any idea what this means:  Macro result was 256

On Fri, Jan 3, 2020 at 2:50 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
do i run these chmod's?:
chmod +x dvsm.macro
chmod +x dvswitch.sh

On Fri, Jan 3, 2020 at 1:50 PM Steve N4IRS <szingman@...> wrote:
I would get rid of the old scripts since dvswitch.sh does a great deal more then any of the old scripts.
I would suggest you look at the new ini and macro files so you understand how mode switching works (if you need it.)

On 1/3/2020 2:48 PM, Russell, KV4S wrote:
well that sounds easy enough.
so it's ok to delete the old ini's and .sh scripts?
nothing has to change with the mobile app right?

On Fri, Jan 3, 2020 at 12:58 PM Steve N4IRS <szingman@...> wrote:
replace the executable /opt/Analog_Bridge/Analog_Bridge with the correct architecture from <https://github.com/DVSwitch/Analog_Bridge/tree/master/bin>
add the following to /opt/Analog_Bridge from <https://github.com/DVSwitch/Analog_Bridge>
dvswitch.sh
dvsm.macro

Steve N4IRS

On 1/3/2020 1:14 PM, Russell, KV4S wrote:
does anyone have an update/install guide for the updated DVSwitch using the new dvswitch.sh script?

If not can someone spitball it?

On Fri, Jan 3, 2020 at 11:34 AM Steve N4IRS <szingman@...> wrote:

If you are running the current Analog_bridge and dvswitch.sh from github:
With your DVSM connected
As root
cd /opt/Analog_Bridge
./dvswitch.sh collectProcessPushDataFiles

This will update the TG and reflector lists on DVSM.

73, Steve N4IRS

On 1/3/2020 12:29 PM, xmarcelo3@... wrote:
We have set up and configure a new YSF for our group a week ago.

The YSF named US YSF MIAMI is showing on the Pi-Star software list as well in the DV4mini, openSPOT, etc. list.

My question, How long it takes to show on the DVSwitch mobile application?.

Thanks for all the great of this group.
Marcelo/KC4GYB/73's





Re: YSF List does not update ??

 

i attempted this but i'm not sure it means anything may be because i'm running it command line

/opt/Analog_Bridge_01/dvswitch.sh mode YSF
/opt/Analog_Bridge_01/dvswitch.sh: line 59: python: command not found
Can not find /tmp/ABInfo file, aborting


On Fri, Jan 3, 2020 at 3:29 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
hmm it doesn't seem to be changing modes? any idea?
I just have it setup for DMR and YSF.

On Fri, Jan 3, 2020 at 3:03 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
any idea what this means:  Macro result was 256

On Fri, Jan 3, 2020 at 2:50 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
do i run these chmod's?:
chmod +x dvsm.macro
chmod +x dvswitch.sh

On Fri, Jan 3, 2020 at 1:50 PM Steve N4IRS <szingman@...> wrote:
I would get rid of the old scripts since dvswitch.sh does a great deal more then any of the old scripts.
I would suggest you look at the new ini and macro files so you understand how mode switching works (if you need it.)

On 1/3/2020 2:48 PM, Russell, KV4S wrote:
well that sounds easy enough.
so it's ok to delete the old ini's and .sh scripts?
nothing has to change with the mobile app right?

On Fri, Jan 3, 2020 at 12:58 PM Steve N4IRS <szingman@...> wrote:
replace the executable /opt/Analog_Bridge/Analog_Bridge with the correct architecture from <https://github.com/DVSwitch/Analog_Bridge/tree/master/bin>
add the following to /opt/Analog_Bridge from <https://github.com/DVSwitch/Analog_Bridge>
dvswitch.sh
dvsm.macro

Steve N4IRS

On 1/3/2020 1:14 PM, Russell, KV4S wrote:
does anyone have an update/install guide for the updated DVSwitch using the new dvswitch.sh script?

If not can someone spitball it?

On Fri, Jan 3, 2020 at 11:34 AM Steve N4IRS <szingman@...> wrote:

If you are running the current Analog_bridge and dvswitch.sh from github:
With your DVSM connected
As root
cd /opt/Analog_Bridge
./dvswitch.sh collectProcessPushDataFiles

This will update the TG and reflector lists on DVSM.

73, Steve N4IRS

On 1/3/2020 12:29 PM, xmarcelo3@... wrote:
We have set up and configure a new YSF for our group a week ago.

The YSF named US YSF MIAMI is showing on the Pi-Star software list as well in the DV4mini, openSPOT, etc. list.

My question, How long it takes to show on the DVSwitch mobile application?.

Thanks for all the great of this group.
Marcelo/KC4GYB/73's




Re: YSF List does not update ??

 

hmm it doesn't seem to be changing modes? any idea?
I just have it setup for DMR and YSF.

On Fri, Jan 3, 2020 at 3:03 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
any idea what this means:  Macro result was 256

On Fri, Jan 3, 2020 at 2:50 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
do i run these chmod's?:
chmod +x dvsm.macro
chmod +x dvswitch.sh

On Fri, Jan 3, 2020 at 1:50 PM Steve N4IRS <szingman@...> wrote:
I would get rid of the old scripts since dvswitch.sh does a great deal more then any of the old scripts.
I would suggest you look at the new ini and macro files so you understand how mode switching works (if you need it.)

On 1/3/2020 2:48 PM, Russell, KV4S wrote:
well that sounds easy enough.
so it's ok to delete the old ini's and .sh scripts?
nothing has to change with the mobile app right?

On Fri, Jan 3, 2020 at 12:58 PM Steve N4IRS <szingman@...> wrote:
replace the executable /opt/Analog_Bridge/Analog_Bridge with the correct architecture from <https://github.com/DVSwitch/Analog_Bridge/tree/master/bin>
add the following to /opt/Analog_Bridge from <https://github.com/DVSwitch/Analog_Bridge>
dvswitch.sh
dvsm.macro

Steve N4IRS

On 1/3/2020 1:14 PM, Russell, KV4S wrote:
does anyone have an update/install guide for the updated DVSwitch using the new dvswitch.sh script?

If not can someone spitball it?

On Fri, Jan 3, 2020 at 11:34 AM Steve N4IRS <szingman@...> wrote:

If you are running the current Analog_bridge and dvswitch.sh from github:
With your DVSM connected
As root
cd /opt/Analog_Bridge
./dvswitch.sh collectProcessPushDataFiles

This will update the TG and reflector lists on DVSM.

73, Steve N4IRS

On 1/3/2020 12:29 PM, xmarcelo3@... wrote:
We have set up and configure a new YSF for our group a week ago.

The YSF named US YSF MIAMI is showing on the Pi-Star software list as well in the DV4mini, openSPOT, etc. list.

My question, How long it takes to show on the DVSwitch mobile application?.

Thanks for all the great of this group.
Marcelo/KC4GYB/73's




Re: YSF List does not update ??

 

any idea what this means:  Macro result was 256


On Fri, Jan 3, 2020 at 2:50 PM Russell, KV4S via Groups.Io <russelljthomas=gmail.com@groups.io> wrote:
do i run these chmod's?:
chmod +x dvsm.macro
chmod +x dvswitch.sh

On Fri, Jan 3, 2020 at 1:50 PM Steve N4IRS <szingman@...> wrote:
I would get rid of the old scripts since dvswitch.sh does a great deal more then any of the old scripts.
I would suggest you look at the new ini and macro files so you understand how mode switching works (if you need it.)

On 1/3/2020 2:48 PM, Russell, KV4S wrote:
well that sounds easy enough.
so it's ok to delete the old ini's and .sh scripts?
nothing has to change with the mobile app right?

On Fri, Jan 3, 2020 at 12:58 PM Steve N4IRS <szingman@...> wrote:
replace the executable /opt/Analog_Bridge/Analog_Bridge with the correct architecture from <https://github.com/DVSwitch/Analog_Bridge/tree/master/bin>
add the following to /opt/Analog_Bridge from <https://github.com/DVSwitch/Analog_Bridge>
dvswitch.sh
dvsm.macro

Steve N4IRS

On 1/3/2020 1:14 PM, Russell, KV4S wrote:
does anyone have an update/install guide for the updated DVSwitch using the new dvswitch.sh script?

If not can someone spitball it?

On Fri, Jan 3, 2020 at 11:34 AM Steve N4IRS <szingman@...> wrote:

If you are running the current Analog_bridge and dvswitch.sh from github:
With your DVSM connected
As root
cd /opt/Analog_Bridge
./dvswitch.sh collectProcessPushDataFiles

This will update the TG and reflector lists on DVSM.

73, Steve N4IRS

On 1/3/2020 12:29 PM, xmarcelo3@... wrote:
We have set up and configure a new YSF for our group a week ago.

The YSF named US YSF MIAMI is showing on the Pi-Star software list as well in the DV4mini, openSPOT, etc. list.

My question, How long it takes to show on the DVSwitch mobile application?.

Thanks for all the great of this group.
Marcelo/KC4GYB/73's




Re: YSF List does not update ??

 

do i run these chmod's?:
chmod +x dvsm.macro
chmod +x dvswitch.sh


On Fri, Jan 3, 2020 at 1:50 PM Steve N4IRS <szingman@...> wrote:
I would get rid of the old scripts since dvswitch.sh does a great deal more then any of the old scripts.
I would suggest you look at the new ini and macro files so you understand how mode switching works (if you need it.)

On 1/3/2020 2:48 PM, Russell, KV4S wrote:
well that sounds easy enough.
so it's ok to delete the old ini's and .sh scripts?
nothing has to change with the mobile app right?

On Fri, Jan 3, 2020 at 12:58 PM Steve N4IRS <szingman@...> wrote:
replace the executable /opt/Analog_Bridge/Analog_Bridge with the correct architecture from <https://github.com/DVSwitch/Analog_Bridge/tree/master/bin>
add the following to /opt/Analog_Bridge from <https://github.com/DVSwitch/Analog_Bridge>
dvswitch.sh
dvsm.macro

Steve N4IRS

On 1/3/2020 1:14 PM, Russell, KV4S wrote:
does anyone have an update/install guide for the updated DVSwitch using the new dvswitch.sh script?

If not can someone spitball it?

On Fri, Jan 3, 2020 at 11:34 AM Steve N4IRS <szingman@...> wrote:

If you are running the current Analog_bridge and dvswitch.sh from github:
With your DVSM connected
As root
cd /opt/Analog_Bridge
./dvswitch.sh collectProcessPushDataFiles

This will update the TG and reflector lists on DVSM.

73, Steve N4IRS

On 1/3/2020 12:29 PM, xmarcelo3@... wrote:
We have set up and configure a new YSF for our group a week ago.

The YSF named US YSF MIAMI is showing on the Pi-Star software list as well in the DV4mini, openSPOT, etc. list.

My question, How long it takes to show on the DVSwitch mobile application?.

Thanks for all the great of this group.
Marcelo/KC4GYB/73's




Re: DSTAR Registration Questions

Ed W8VT
 

IT WORKS!!! After much head banging, cursing, etc everything  now working fine on DSTAR. Reinstalled MMDVM_Bridge and DSTAR started working fine. Weird because it worked fine on DMR and YSF.
Really surprised at the quality of the audio, I'm using the hardware vocoder dongle.
Thanks for the help and I certainly know a lot more about DSTAR now than when I started.

Ed W8VT


Re: Rebuilding the Node

Steve N4IRS
 

I would

Sent by smoke signal (AT&T)


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Tito Lopez <OBUSTOS01@...>
Sent: Friday, January 3, 2020 3:07:31 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] Rebuilding the Node
 
I saw the files they have the .i386 extension would they need to be renamed?
Orlando


Re: Rebuilding the Node

Tito Lopez - YN1OB
 

I saw the files they have the .i386 extension would they need to be renamed?
Orlando


Re: YSF List does not update ??

Steve N4IRS
 

I would get rid of the old scripts since dvswitch.sh does a great deal more then any of the old scripts.
I would suggest you look at the new ini and macro files so you understand how mode switching works (if you need it.)

On 1/3/2020 2:48 PM, Russell, KV4S wrote:
well that sounds easy enough.
so it's ok to delete the old ini's and .sh scripts?
nothing has to change with the mobile app right?

On Fri, Jan 3, 2020 at 12:58 PM Steve N4IRS <szingman@...> wrote:
replace the executable /opt/Analog_Bridge/Analog_Bridge with the correct architecture from <https://github.com/DVSwitch/Analog_Bridge/tree/master/bin>
add the following to /opt/Analog_Bridge from <https://github.com/DVSwitch/Analog_Bridge>
dvswitch.sh
dvsm.macro

Steve N4IRS

On 1/3/2020 1:14 PM, Russell, KV4S wrote:
does anyone have an update/install guide for the updated DVSwitch using the new dvswitch.sh script?

If not can someone spitball it?

On Fri, Jan 3, 2020 at 11:34 AM Steve N4IRS <szingman@...> wrote:

If you are running the current Analog_bridge and dvswitch.sh from github:
With your DVSM connected
As root
cd /opt/Analog_Bridge
./dvswitch.sh collectProcessPushDataFiles

This will update the TG and reflector lists on DVSM.

73, Steve N4IRS

On 1/3/2020 12:29 PM, xmarcelo3@... wrote:
We have set up and configure a new YSF for our group a week ago.

The YSF named US YSF MIAMI is showing on the Pi-Star software list as well in the DV4mini, openSPOT, etc. list.

My question, How long it takes to show on the DVSwitch mobile application?.

Thanks for all the great of this group.
Marcelo/KC4GYB/73's



3521 - 3540 of 9221