Date   

Re: Image for Raspberry pi3 with Debian 10 Buster with DVSWICTH SERVER, HBLINK3 AND HBMONITOR.

EA5GVK Joaquin
 

Here have v5 update OTA until V8

http://ea5gvk-dmr.zigor.es/2019/12/17/v-5-imagen-dvswitch-y-hblink-blasmakers-bautizada-dvlink-llega-para-quedarse/

And also versión virtualbox V8 DVLINK. With server DVSwitch multiuser and server Hblink.

http://ea5gvk-dmr.zigor.es/2020/01/19/ya-disponemos-imagen-dvlink-para-virtualbox-virtualdvlink-por-ea7jcl/

73 EA5GVK & EA7JCL @GROUP BLASMAKERS


Re: Which base image to use with DV Switch: Allstar or HamVoIP

Patrick Perdue
 

I'm not as familiar with the conventions of Arch Linux as I am with Debian. Did you install from a package (I think there is one in the HamVoIP repository,) or did you put everything in place and manually implement the init scripts?

I don't have an immediate need to run DVSwitch on my HamVoIP nodes, but I've gotten questions about it recently from some who do.


On 1/26/2020 2:51 PM, Brad N8PC wrote:
yes it works. I have DMR bridge on hamvoip image. check out 314651 dmr tg allstar 45743or echolink 275408

Brad N8PC

On 1/26/2020 2:22 PM, Mike WG5EEK wrote:
David, did you get this running?  I want to add a DMR bridge to my HamVoIP install but ran into obviously issues with dependencies.

Mike


Re: Which base image to use with DV Switch: Allstar or HamVoIP

Brad N8PC
 

yes it works. I have DMR bridge on hamvoip image. check out 314651 dmr tg allstar 45743or echolink 275408

Brad N8PC

On 1/26/2020 2:22 PM, Mike WG5EEK wrote:
David, did you get this running?  I want to add a DMR bridge to my HamVoIP install but ran into obviously issues with dependencies.

Mike


Re: Which base image to use with DV Switch: Allstar or HamVoIP

Mike WG5EEK
 

David, did you get this running?  I want to add a DMR bridge to my HamVoIP install but ran into obviously issues with dependencies.

Mike


Re: Image for Raspberry pi3 with Debian 10 Buster with DVSWICTH SERVER, HBLINK3 AND HBMONITOR.

kj4gmu@...
 

Hello All,

I have installed Jaoquin’s v2 DVSwitch Server image on a R Pi 3+ and have followed the setup instructions. The YSF mode works flawlessly, however I can’t seem to have any luck receiving or transmitting any audio on DMR+ or DMR BM. I have updated the server IP on both and have also updated binaries and scripts. Any ideas as to what I have missed or done incorrectly?

Thanks a lot,
Jay KJ4GMU


Re: DVSwitch Server instructions refresh

 

On Wed, Jan 22, 2020 at 9:05 PM Ken, K6EFJ <ken@...> wrote:
Any idea when the updated pdf for
 (https://dvswitch.groups.io/g/Mobile/files/Mobile%20DVSwitch%200725.pdf) with dvswitch.sh will be available?
Thanks,
Ken Smith K6EFJ 


Re: change USRP and TLV gain with dvswitch.sh

Patrick Perdue
 

Thanks Steve. This works as expected.

On 1/24/2020 5:55 AM, Steve N4IRS wrote:
Patrick,
dvswitch.sh will do what you want.

Example:
dvswitch.sh tlvAudio AUDIO_USE_GAIN 1.1
dvswitch.sh usrpAudio AUDIO_USE_GAIN .93

You will see the change reflected in the AB log and in the AB json file in /tmp
Assuming you are using port 12345, you will find a file in /tmp named:
ABInfo_12345.json
This contains all current setting in use by AB.

Steve N4IRS

On 1/23/20 11:43 PM, Patrick Perdue wrote:
Is there a way to change the USRP and TLV gain on the fly with dvswitch.sh?

I normally have my USRP gain set to 0.34, and TLV gain set to 3.00, which works fine most of the time, but there is one net controller using a very hot DMR radio (GD77S) which clips out at that gain even when he backs off. I like having higher than unity gain, because it makes it easier for those using Allstar to hear the wider dynamic range of DMR users. If I change the gain to unity or 1.80, it's fine with this hot radio (1.80 is actually a little on the edge as well, but not as bad as 3.00,) but the only way I know of for doing this is changing it in the INI file and restarting A_B. I have never gotten satisfactory results with AGC.

Thanks and 73

KE4DYI





Re: change USRP and TLV gain with dvswitch.sh

Steve N4IRS
 

Patrick,
dvswitch.sh will do what you want.

Example:
dvswitch.sh tlvAudio AUDIO_USE_GAIN 1.1
dvswitch.sh usrpAudio AUDIO_USE_GAIN .93

You will see the change reflected in the AB log and in the AB json file in /tmp
Assuming you are using port 12345, you will find a file in /tmp named:
ABInfo_12345.json
This contains all current setting in use by AB.

Steve N4IRS

On 1/23/20 11:43 PM, Patrick Perdue wrote:
Is there a way to change the USRP and TLV gain on the fly with dvswitch.sh?

I normally have my USRP gain set to 0.34, and TLV gain set to 3.00, which works fine most of the time, but there is one net controller using a very hot DMR radio (GD77S) which clips out at that gain even when he backs off. I like having higher than unity gain, because it makes it easier for those using Allstar to hear the wider dynamic range of DMR users. If I change the gain to unity or 1.80, it's fine with this hot radio (1.80 is actually a little on the edge as well, but not as bad as 3.00,) but the only way I know of for doing this is changing it in the INI file and restarting A_B. I have never gotten satisfactory results with AGC.

Thanks and 73

KE4DYI



change USRP and TLV gain with dvswitch.sh

Patrick Perdue
 

Is there a way to change the USRP and TLV gain on the fly with dvswitch.sh?

I normally have my USRP gain set to 0.34, and TLV gain set to 3.00, which works fine most of the time, but there is one net controller using a very hot DMR radio (GD77S) which clips out at that gain even when he backs off. I like having higher than unity gain, because it makes it easier for those using Allstar to hear the wider dynamic range of DMR users. If I change the gain to unity or 1.80, it's fine with this hot radio (1.80 is actually a little on the edge as well, but not as bad as 3.00,) but the only way I know of for doing this is changing it in the INI file and restarting A_B. I have never gotten satisfactory results with AGC.

Thanks and 73

KE4DYI


Re: DMR to YSF Weird Issue

Eric-K6KWB
 
Edited

Steve N4IRS
Just FYI - this suggestion works, thank you much.

chmod +x MMDVM_Bridge.amd64

best, Eric


Re: Ben Fogle N5AMD contact info ?

John MI0AAZ
 

Will look you up now and drop you a message.
73.


Re: USPR and GPIO (4 wire analog interface) to P25 #mmdvm_bridge #analog_bridge

Steve N4IRS
 

On 1/23/2020 8:22 AM, Tim VK3TIM wrote:
Hi Steve,
I have a  ASL node setup with
"First node" using the modified simpleusb drivers " I think you may have originally setup ASL_GPIO_Master" that was later forked (https://github.com/KG7QIN/ASL_GPIO) .
This allows the use of Pi GPIOs for the analog PTT and COS audio via a CM108 sound card -"4 wire E&M." - "I use a customised Pi Hat for this."
"Second node" is using USRP to Analog Bridge.
"First node" Using DTMF scripts in ASL for the *Tune.sh commands for the Mode change and the TG changes much similar to your original DVswitch approach with multiple .ini files.
At this stage all seems to be working well.
I did notice when activating a "mode" change command that the analog bridge service had to be restarted three times in the script when making the changes to the analog_bridge.ini  copying them to temp and then copying back to the opt/Analog_bridge directory or it would sometimes get stuck - This also happened to me on the original USRP controls using DVswitch (it also meant that with every "mode" change I had to register again but that didn't worry me.)
- What i am looking into now is a user dashboard to see what the Modes and Talkgroups are actually on visually and possibly  audio commands back over the "First Node"

(I think I am already in that group will take a look.) 
Thanks for all your great work.
Tim 
VK3TIM





DSTAR REF084C , XLX933A/B/C etc... with DVSWITCH MOBILE ?

Ludovic Ludo
 

Hello,

i just terminated a french tutorial for DVSwitch on raspi :
http://radioamateur.forumsactifs.com/t2299-dvswitch-mobile-tutoriel-d-installation-sur-raspberry-pi-3-sans-dongle-usb-dmr-c4fm-dstar-p25-nxdn

I search the possibility to go on REF084C or 933A/Z but for
the moment i do not know how to do that.

If you have the solution, thank's in advance.

Best regards,
Ludovic - F5PBG.


Re: USPR and GPIO (4 wire analog interface) to P25 #mmdvm_bridge #analog_bridge

 

Hi Steve,
I have a  ASL node setup with
"First node" using the modified simpleusb drivers " I think you may have originally setup ASL_GPIO_Master" that was later forked (https://github.com/KG7QIN/ASL_GPIO) .
This allows the use of Pi GPIOs for the analog PTT and COS audio via a CM108 sound card -"4 wire E&M." - "I use a customised Pi Hat for this."
"Second node" is using USRP to Analog Bridge.
"First node" Using DTMF scripts in ASL for the *Tune.sh commands for the Mode change and the TG changes much similar to your original DVswitch approach with multiple .ini files.
At this stage all seems to be working well.
I did notice when activating a "mode" change command that the analog bridge service had to be restarted three times in the script when making the changes to the analog_bridge.ini  copying them to temp and then copying back to the opt/Analog_bridge directory or it would sometimes get stuck - This also happened to me on the original USRP controls using DVswitch (it also meant that with every "mode" change I had to register again but that didn't worry me.)
- What i am looking into now is a user dashboard to see what the Modes and Talkgroups are actually on visually and possibly  audio commands back over the "First Node"

(I think I am already in that group will take a look.) 
Thanks for all your great work.
Tim 
VK3TIM




Re: USPR and GPIO (4 wire analog interface) to P25 #mmdvm_bridge #analog_bridge

Steve N4IRS
 

Tim,
Can you share more info on what you have done? I think we may have some drivers you might want to look at. Join us at <https://dvswitch.groups.io/g/DVSwitch-ASL> where we are customizing ASL for DVSwitch.

73, Steve N4IRS

On 1/23/20 7:04 AM, Tim VK3TIM wrote:
To answer my own question and in case anyone else is interested I have successfully implemented this idea using Allstar node with 2x nodes first node is using modified Pi GPIO SimpleUSB driver and  second node is USRP to Analog Bridge to P25 Gateway - (In fact any digital modes to Analog Bridge) now to setup a User front end to control the modes via a web-page....
Or can this be done using DTMF to Allstar nodes....
Cheers
VK3TIM


Re: USPR and GPIO (4 wire analog interface) to P25 #mmdvm_bridge #analog_bridge

 

To answer my own question and in case anyone else is interested I have successfully implemented this idea using Allstar node with 2x nodes first node is using modified Pi GPIO SimpleUSB driver and  second node is USRP to Analog Bridge to P25 Gateway - (In fact any digital modes to Analog Bridge) now to setup a User front end to control the modes via a web-page....
Or can this be done using DTMF to Allstar nodes....
Cheers
VK3TIM


Re: mmdbm_bridge segfault

Steve N4IRS
 

Sure, Happy to help.

Steve

On 1/22/20 10:32 PM, davek wrote:
Everything is working great. Thanks Steve!


Re: mmdbm_bridge segfault

davek
 

Everything is working great. Thanks Steve!


Re: DVSwitch Server instructions refresh

Steve N4IRS
 

Ken,
Best I can say right now is soon. Joe is working on it.

Steve N4IRS

On 1/22/20 10:05 PM, Ken, K6EFJ wrote:
Any idea when the updated pdf for
 (https://dvswitch.groups.io/g/Mobile/files/Mobile%20DVSwitch%200725.pdf) with dvswitch.sh will be available?
Thanks,
Ken Smith K6EFJ 


Re: DVSwitch Server instructions refresh

Ken, K6EFJ
 

Any idea when the updated pdf for
 (https://dvswitch.groups.io/g/Mobile/files/Mobile%20DVSwitch%200725.pdf) with dvswitch.sh will be available?
Thanks,
Ken Smith K6EFJ 

4101 - 4120 of 9882