Date   

Re: need to find a way to link hblink or ysf or mmdvmbridge to wires x room

Paul on6dp
 

Hallo,

 

ME TOO I’m interested

 

Paul, ON6DP

 

De : main@DVSwitch.groups.io <main@DVSwitch.groups.io> De la part de Gary, KE8O
Envoyé : mercredi 12 février 2020 04:54
À : main@DVSwitch.groups.io
Objet : Re: [DVSwitch] need to find a way to link hblink or ysf or mmdvmbridge to wires x room

 

Ernie, 

Thanks for your response. What is the reason behind using the OpenSpot 2 to bridge your WiresX to DMR vs YSF?  Our random BM user blocked message is our biggest annoyance because once it starts it follows any transmissions on the room until we stop the bridge or there is an hour without a activity. We have one user who triggers it anytime they key up. 


73,
...Gary, KE8O 


Re: need to find a way to link hblink or ysf or mmdvmbridge to wires x room

 

Hello Gary
Pressed the send button.

Lots of software wants to use the wires-x  button to change rooms. This has caused endless problems.


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Ernie Gm7kbk <erniepratt@...>
Sent: Wednesday, February 12, 2020 7:43:07 AM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] need to find a way to link hblink or ysf or mmdvmbridge to wires x room
 
Hello Gary

Wires-x  to openspot2 to xlx works. C4fm to Dmr.

Wires-x to modified MMDVM_Host to Ysfreflector works. Works great until someone transmits with the x button still enable on there radio.

Wires-x  to Fcs Reflector using openspot works.

Ysf to Dmr. Use MMDVM_Bridge.

You think you have problems with Brandmeister wait till you link wires-x  into the system. For two years everything was fine until most software wants to use the wires-x


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Gary, KE8O <ke8o.gary@...>
Sent: Wednesday, February 12, 2020 4:02:49 AM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] need to find a way to link hblink or ysf or mmdvmbridge to wires x room
 
Steve, 

Thanks for getting it back on the radar. If I had to prioritize the two issues I’m experiencing it would be 1) minimum TX duration setting in MB (to stop our random BM user block message) and 2) DMR audio level difference.

73, 
...Gary


Re: need to find a way to link hblink or ysf or mmdvmbridge to wires x room

 

Hello Gary

Wires-x  to openspot2 to xlx works. C4fm to Dmr.

Wires-x to modified MMDVM_Host to Ysfreflector works. Works great until someone transmits with the x button still enable on there radio.

Wires-x  to Fcs Reflector using openspot works.

Ysf to Dmr. Use MMDVM_Bridge.

You think you have problems with Brandmeister wait till you link wires-x  into the system. For two years everything was fine until most software wants to use the wires-x


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Gary, KE8O <ke8o.gary@...>
Sent: Wednesday, February 12, 2020 4:02:49 AM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] need to find a way to link hblink or ysf or mmdvmbridge to wires x room
 
Steve, 

Thanks for getting it back on the radar. If I had to prioritize the two issues I’m experiencing it would be 1) minimum TX duration setting in MB (to stop our random BM user block message) and 2) DMR audio level difference.

73, 
...Gary


Re: need to find a way to link hblink or ysf or mmdvmbridge to wires x room

Gary, KE8O
 

Steve, 

Thanks for getting it back on the radar. If I had to prioritize the two issues I’m experiencing it would be 1) minimum TX duration setting in MB (to stop our random BM user block message) and 2) DMR audio level difference.

73, 
...Gary


Re: need to find a way to link hblink or ysf or mmdvmbridge to wires x room

Gary, KE8O
 

Ernie, 

Thanks for your response. What is the reason behind using the OpenSpot 2 to bridge your WiresX to DMR vs YSF?  Our random BM user blocked message is our biggest annoyance because once it starts it follows any transmissions on the room until we stop the bridge or there is an hour without a activity. We have one user who triggers it anytime they key up. 


73,
...Gary, KE8O 


Re: Nxdn to Nxcore

James Riley kb9tzq
 

I have tried that but then it shuts off on my link to brandmiester


On Mon, Feb 10, 2020 at 1:23 PM Scott Evans <vk7hse@...> wrote:

At the end of NXDNReflector.ini you will need to put the IP to the NXCore server

[NXCore] Enabled=1 Address=110.232.114.40 #Address=44.131.4.1 TGEnable=5057

TGDisable=3456

Debug=0

In this example my nxdn reflector is connected to the VKCore service.


Re: Nxdn to Nxcore

Scott Evans
 

At the end of NXDNReflector.ini you will need to put the IP to the NXCore server

[NXCore] Enabled=1 Address=110.232.114.40 #Address=44.131.4.1 TGEnable=5057

TGDisable=3456

Debug=0

In this example my nxdn reflector is connected to the VKCore service.


Re: Nxdn to Nxcore

James Riley kb9tzq
 

I already talk to them it's something to do with one of the files on my end i just taught I would ask since there alot of guys setup Nxdn Reflector  threw dvswitch like I did that might point me in the right direction 


Re: Nxdn to Nxcore

Steve N4IRS
 

Your best option would be to ask the admins of Nxcore. This has nothing to do with DVSwitch software.

Steve N4IRS

On 2/9/20 8:20 PM, James Riley kb9tzq wrote:
Hello I have a Nxdn Reflector how do I get it to connect to Nxcore I have already talk to one of the admins to add it just need to know what to do on my side


Nxdn to Nxcore

James Riley kb9tzq
 

Hello I have a Nxdn Reflector how do I get it to connect to Nxcore I have already talk to one of the admins to add it just need to know what to do on my side


Change source module - MMDVM_Bridge > DMRGateway > XLX

N0KEG
 

Hey everyone,

I've been successfully using the DVSwitch program suite for a while now, so thanks for all your hard work!  One thing I can't figure out though...  I have several links using the same callsign going into an XLX machine.  I'd like to change the module on the source side so it's easier to tell them apart.  Like CALLSIGN-Y for my YSF2DMR link, CALLSIGN-A for my analog link, etc...  Right now they all show up as the B module.  Any help would be appreciated.

Thanks and 73,
N0KEG


Re: Updates to the Wiki

Steve N4IRS
 

Randy,
Thank you for working on this. Simply put, we will take all the help we can get!

Steve N4IRS

On 2/9/20 6:53 PM, Randy AA6RH wrote:
Hey everybody,

I'm a relative newcomer, but am a big enthusiast for DVSwitch and open source/FOSS ham software.

As I'm not as knowledgeable about the software as of yet, I thought I would take a stab at starting to clean up the documentation in the wiki. Whew!

I've made several changes to the main page (click "Wiki" in the navigation), the sidebar, and several other pages. The changes so far have been mostly for looks, but with some grammatical and updates where needed.

Some of the things I've been checking out on GitHub to confirm what each of the partner apps of DVSwitch can do has been really helpful in understanding how to make use of this software! So, if you have a moment to check on the wiki and give some feedback, I'd very much appreciate it.

Cheers,

--R

AA6RH


Updates to the Wiki

Randy AA6RH
 

Hey everybody,

I'm a relative newcomer, but am a big enthusiast for DVSwitch and open source/FOSS ham software.

As I'm not as knowledgeable about the software as of yet, I thought I would take a stab at starting to clean up the documentation in the wiki. Whew!

I've made several changes to the main page (click "Wiki" in the navigation), the sidebar, and several other pages. The changes so far have been mostly for looks, but with some grammatical and updates where needed.

Some of the things I've been checking out on GitHub to confirm what each of the partner apps of DVSwitch can do has been really helpful in understanding how to make use of this software! So, if you have a moment to check on the wiki and give some feedback, I'd very much appreciate it.

Cheers,

--R

AA6RH


Access to a Fusion FCS room #dmrlink

Denny Johnson <dennyj@...>
 

Hi,
I'm trying to connect to the QSO America room on FCS but can't find it in the dropdown menu using my RT4. 
So, I'm thinking I can add a macro for QSO America but need to know how to format it. What I'm doing doesn't seem to connect.

Any help would be appreciated.

Thanks,
Denny - K5DCC
DigiCommCafe


Re: need to find a way to link hblink or ysf or mmdvmbridge to wires x room

Steve N4IRS
 

Gary,
Thanks for reminding me about the audio level problem. The issue kinda dropped off our radar. I know Mike is reading this and we will at least get this back on the list to investigate.

Steve N4IRS

Sent via smoke signal (AT&T)


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Gary, KE8O <ke8o.gary@...>
Sent: Friday, February 7, 2020 9:08:21 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] need to find a way to link hblink or ysf or mmdvmbridge to wires x room
 
Hi Erine,

How many end points do you typically have on your network using this configuration? How is the audio level balance between DMR and YSF? Do you experience and issue with Brandmeister user block message? 

This is my setup.
Wires-X - OpenSpot 1 (YSF)
                                   MMDVM_Bridge YSF to DMR (BM)

The DMR audio is ~ 30% louder then YSF, audio. We probably experience the BrandMeister User Blocked message a few times per week.

73,
...Gary, KE8O

We have on average 26 connections on Wires-X, 40 YSF, no visibility into the number of users on DMR.

.


Re: need to find a way to link hblink or ysf or mmdvmbridge to wires x room

 

Hello Gary

I don't see any user blocked messages on Brandmeister.
Audio can be controlled by getting users to adjust their settings. Most have there mic gain turned up for c4fm. And most users here have Chinese radios for dmr which are not to loud. Anybody comming into the system with a commercial radio will soon be told to back off the mic.
XLX controls the audio from Dstar and Dmr.

Total users change from day to day.
40 nodes or gateways on wires-x
70 on fcs
70 on Ysf
30 on dmr

We have also got peanut, zello, teamspeak, allstar and echolink all connected. The audio from these links can be quite good depending on what equipment is being used.


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Gary, KE8O <ke8o.gary@...>
Sent: Saturday, February 8, 2020 2:08:21 AM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] need to find a way to link hblink or ysf or mmdvmbridge to wires x room
 
Hi Erine,

How many end points do you typically have on your network using this configuration? How is the audio level balance between DMR and YSF? Do you experience and issue with Brandmeister user block message? 

This is my setup.
Wires-X - OpenSpot 1 (YSF)
                                   MMDVM_Bridge YSF to DMR (BM)

The DMR audio is ~ 30% louder then YSF, audio. We probably experience the BrandMeister User Blocked message a few times per week.

73,
...Gary, KE8O

We have on average 26 connections on Wires-X, 40 YSF, no visibility into the number of users on DMR.

.


Re: need to find a way to link hblink or ysf or mmdvmbridge to wires x room

Gary, KE8O
 

Hi Erine,

How many end points do you typically have on your network using this configuration? How is the audio level balance between DMR and YSF? Do you experience and issue with Brandmeister user block message? 

This is my setup.
Wires-X - OpenSpot 1 (YSF)
                                   MMDVM_Bridge YSF to DMR (BM)

The DMR audio is ~ 30% louder then YSF, audio. We probably experience the BrandMeister User Blocked message a few times per week.

73,
...Gary, KE8O

We have on average 26 connections on Wires-X, 40 YSF, no visibility into the number of users on DMR.

.


Re: need to find a way to link hblink or ysf or mmdvmbridge to wires x room

 

Hello Brandmeister is a direct link to XLX .

Bring in Dmr plus using two MB plus Dmrgateway to swap from slot 1 to 2.
One instance of MB for ysf to dmr.
Hblink connects to XLX.

Peanut and Dstar via ambed XLX

Ernie


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of David Ranch <dvswitch-groupsio@...>
Sent: Friday, February 7, 2020 4:07:14 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] need to find a way to link hblink or ysf or mmdvmbridge to wires x room
 

Hello Ernie,

I'd like to get something like this working as well (no interest in using the YSF side of things per se) so I'm very interested in this thread.

Your diagram didn't seem to render correctly for me here but are you saying you're connecting to a WiresX room using an OpenSpot2?  It also looks like you're going between WiresX and BrandMiester via D-star.  That means you're unnecessarily transcoding across different versions of the AMBE codec which will create a loss of audio fidelity.  Is there any way to keep all this within the native AMBE codec version so the audio between the WiresX and DMR universes as good as possible?

--David
KI6ZHD


On 02/07/2020 04:33 AM, Ernie Gm7kbk wrote:
My system is like this.

                                                  - MMDVM_Bridge - YSFReflector
wires-x - openspot2 (dmr)  - xlx  - Brandmeister
                                                   - MMDVM_Bridge - DMR+
                                                   - Hblink3
                                                                 - MMDVM_Bridge  - Analog_Bridge - Allstarlink - Echolink
                                                                 - MMDVM_Bridge  - Analog_Bridge -Dvswitch mobile

I have found this setup to be the most stable. Audio quality back and fourth from all networks are great. 


Re: need to find a way to link hblink or ysf or mmdvmbridge to wires x room

David Ranch
 


Hello Ernie,

I'd like to get something like this working as well (no interest in using the YSF side of things per se) so I'm very interested in this thread.

Your diagram didn't seem to render correctly for me here but are you saying you're connecting to a WiresX room using an OpenSpot2?  It also looks like you're going between WiresX and BrandMiester via D-star.  That means you're unnecessarily transcoding across different versions of the AMBE codec which will create a loss of audio fidelity.  Is there any way to keep all this within the native AMBE codec version so the audio between the WiresX and DMR universes as good as possible?

--David
KI6ZHD


On 02/07/2020 04:33 AM, Ernie Gm7kbk wrote:
My system is like this.

                                                  - MMDVM_Bridge - YSFReflector
wires-x - openspot2 (dmr)  - xlx  - Brandmeister
                                                   - MMDVM_Bridge - DMR+
                                                   - Hblink3
                                                                 - MMDVM_Bridge  - Analog_Bridge - Allstarlink - Echolink
                                                                 - MMDVM_Bridge  - Analog_Bridge -Dvswitch mobile

I have found this setup to be the most stable. Audio quality back and fourth from all networks are great. 


Re: need to find a way to link hblink or ysf or mmdvmbridge to wires x room

 

My system is like this.

                                                  - MMDVM_Bridge - YSFReflector
wires-x - openspot2 (dmr)  - xlx  - Brandmeister
                                                   - MMDVM_Bridge - DMR+
                                                   - Hblink3
                                                                 - MMDVM_Bridge  - Analog_Bridge - Allstarlink - Echolink
                                                                 - MMDVM_Bridge  - Analog_Bridge -Dvswitch mobile

I have found this setup to be the most stable. Audio quality back and fourth from all networks are great. 

3981 - 4000 of 9821