1. main@DVSwitch.groups.io
   Date   
Re: dash board

Raul cruz <rcw3023@...>
 

The other guy said that he was a problem with the software. I had to take it off wait until the new. Update cuz I wasn't being able to communicate on the dmr or anything else.

Sent from my T-Mobile 4G LTE Device

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of ve6gcd@... <ve6gcd@...>
Sent: Friday, February 14, 2020 9:47:48 AM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] dash board
 
I am having the same issue, I noticed this after reinstall from server crash. It was on PHP 7.3 when it happened. Upgrading to PHP 7.4 did not help either. Ran auto-refresh add-on in Chrome with 1 second setting for the time being.

Re: dash board

ve6gcd@...
 

I am having the same issue, I noticed this after reinstall from server crash. It was on PHP 7.3 when it happened. Upgrading to PHP 7.4 did not help either. Ran auto-refresh add-on in Chrome with 1 second setting for the time being.
Re: Documentation

Steve N4IRS
 

Jay,
No, DMRGateway is not covered because most of the time it is not used.
As to your DMR not working, all I can say is check your configuration.

Steve N4IRS

On 2/13/20 10:27 PM, Jay wrote:
I discovered that the documentation does not cover the editing of DMRGateway.ini, nor does "systemctl enable dmrgateway" work.  Maybe it is not supposed to.  However DMR is not working on my image, so I am eliminating possible causes.

Does this mean that this is covered elsewhere or was it left out?  If left on because it isn't needed, maybe we should note that.  I need to dig into it more to see if I understand what is happening with DMR.
--

jb   N4NQY

Re: Documentation

Jay
 

I discovered that the documentation does not cover the editing of DMRGateway.ini, nor does "systemctl enable dmrgateway" work.  Maybe it is not supposed to.  However DMR is not working on my image, so I am eliminating possible causes.

Does this mean that this is covered elsewhere or was it left out?  If left on because it isn't needed, maybe we should note that.  I need to dig into it more to see if I understand what is happening with DMR.
--

jb   N4NQY
dash board

Raul cruz <rcw3023@...>
 

hi having problems with dvswitch the dash board was working fine it was showing  who was connected all the connections with my dmr id.######## 

but some how now is only showing  this lines only. am I missing something on the settings.thankyou  any help will be appreciated 
RAUL CRUZ     KB5HTB
Documentation

Jay
 

What a great job.  I just ran through the whole process.  I only had one glitch.  the collectProcessDataFiles gave me an ASL node list not valid.  Not a big deal but I was not expecting that.

My next step is to check out the mobile app documentation.

I actually understood the steps, the edits that had to be made, etc.  Kinda foolproof.  Thanks again.  It really cleared up a lot of questions and issues I had been trying to solve on my own.

You might look at draw.io for a free drawing tool.  I have use it for flowcharts, etc and it is easy.

--

jb   N4NQY
Re: need to find a way to link hblink or ysf or mmdvmbridge to wires x room

David
 

For now we are using a hotspot connected to a ysf reflector and a wiresx node running in simplex and low power dummy load to join them.


On Wed, Feb 12, 2020 at 9:54 AM Ernie Gm7kbk <erniepratt@...> wrote:
Hello Gary

You can use Xlx or Hblink without BM.
If connecting ysf to dmr you loose gps. Most people have dmr ids.

Ernie

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Gary, KE8O <ke8o.gary@...>
Sent: Wednesday, February 12, 2020 2:39:43 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] need to find a way to link hblink or ysf or mmdvmbridge to wires x room
 

Ernie 

We get the occasional new hotspot user pressing the WiRESX button causing our WiRESX node software doing the bridging to crash and restart.  For use that is somewhat painless and only affects the bridge traffic between YSF to WiRESX  for about 2 seconds gap. I like your method of going to DMR to strip off those WiREX control characters from the data stream. However, I suspect you also loose the GPS data as well. So those running Fusion to Fusion across the bridge with GPS no longer see distance or callsign/name. Is bridging DMR  to XLX dependent on the BM network or is it self supporting? M

...Gary

 
Re: Access to a Fusion FCS room #dmrlink

Steve N4IRS
 

As of today, MMDVM_Bridge can not directly connect to a FCS room. You would have to use YSFGateway and set the startup to the FCS room you want to connect to. Then steer MB to your YSFGateway.

Steve N4IRS
Re: Access to a Fusion FCS room #dmrlink

Russell, KV4S
 

I'm interested in this too. 🙂


On Sat, Feb 8, 2020, 12:35 PM Denny Johnson via Groups.Io <dennyj=mac.com@groups.io> wrote:
Hi,
I'm trying to connect to the QSO America room on FCS but can't find it in the dropdown menu using my RT4. 
So, I'm thinking I can add a macro for QSO America but need to know how to format it. What I'm doing doesn't seem to connect.

Any help would be appreciated.

Thanks,
Denny - K5DCC
DigiCommCafe

Re: need to find a way to link hblink or ysf or mmdvmbridge to wires x room

Ernie Gm7kbk
 

Hello Gary

You can use Xlx or Hblink without BM.
If connecting ysf to dmr you loose gps. Most people have dmr ids.

Ernie

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Gary, KE8O <ke8o.gary@...>
Sent: Wednesday, February 12, 2020 2:39:43 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] need to find a way to link hblink or ysf or mmdvmbridge to wires x room
 

Ernie 

We get the occasional new hotspot user pressing the WiRESX button causing our WiRESX node software doing the bridging to crash and restart.  For use that is somewhat painless and only affects the bridge traffic between YSF to WiRESX  for about 2 seconds gap. I like your method of going to DMR to strip off those WiREX control characters from the data stream. However, I suspect you also loose the GPS data as well. So those running Fusion to Fusion across the bridge with GPS no longer see distance or callsign/name. Is bridging DMR  to XLX dependent on the BM network or is it self supporting? M

...Gary

 
Re: need to find a way to link hblink or ysf or mmdvmbridge to wires x room

Gary, KE8O
 

Ernie 

We get the occasional new hotspot user pressing the WiRESX button causing our WiRESX node software doing the bridging to crash and restart.  For use that is somewhat painless and only affects the bridge traffic between YSF to WiRESX  for about 2 seconds gap. I like your method of going to DMR to strip off those WiREX control characters from the data stream. However, I suspect you also loose the GPS data as well. So those running Fusion to Fusion across the bridge with GPS no longer see distance or callsign/name. Is bridging DMR  to XLX dependent on the BM network or is it self supporting? M

...Gary

 
Re: need to find a way to link hblink or ysf or mmdvmbridge to wires x room

Paul on6dp
 

Hallo,

 

ME TOO I’m interested

 

Paul, ON6DP

 

De : main@DVSwitch.groups.io <main@DVSwitch.groups.io> De la part de Gary, KE8O
Envoyé : mercredi 12 février 2020 04:54
À : main@DVSwitch.groups.io
Objet : Re: [DVSwitch] need to find a way to link hblink or ysf or mmdvmbridge to wires x room

 

Ernie, 

Thanks for your response. What is the reason behind using the OpenSpot 2 to bridge your WiresX to DMR vs YSF?  Our random BM user blocked message is our biggest annoyance because once it starts it follows any transmissions on the room until we stop the bridge or there is an hour without a activity. We have one user who triggers it anytime they key up. 


73,
...Gary, KE8O 
Re: need to find a way to link hblink or ysf or mmdvmbridge to wires x room

Ernie Gm7kbk
 

Hello Gary
Pressed the send button.

Lots of software wants to use the wires-x  button to change rooms. This has caused endless problems.

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Ernie Gm7kbk <erniepratt@...>
Sent: Wednesday, February 12, 2020 7:43:07 AM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] need to find a way to link hblink or ysf or mmdvmbridge to wires x room
 
Hello Gary

Wires-x  to openspot2 to xlx works. C4fm to Dmr.

Wires-x to modified MMDVM_Host to Ysfreflector works. Works great until someone transmits with the x button still enable on there radio.

Wires-x  to Fcs Reflector using openspot works.

Ysf to Dmr. Use MMDVM_Bridge.

You think you have problems with Brandmeister wait till you link wires-x  into the system. For two years everything was fine until most software wants to use the wires-x

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Gary, KE8O <ke8o.gary@...>
Sent: Wednesday, February 12, 2020 4:02:49 AM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] need to find a way to link hblink or ysf or mmdvmbridge to wires x room
 
Steve, 

Thanks for getting it back on the radar. If I had to prioritize the two issues I’m experiencing it would be 1) minimum TX duration setting in MB (to stop our random BM user block message) and 2) DMR audio level difference.

73, 
...Gary

Re: need to find a way to link hblink or ysf or mmdvmbridge to wires x room

Ernie Gm7kbk
 

Hello Gary

Wires-x  to openspot2 to xlx works. C4fm to Dmr.

Wires-x to modified MMDVM_Host to Ysfreflector works. Works great until someone transmits with the x button still enable on there radio.

Wires-x  to Fcs Reflector using openspot works.

Ysf to Dmr. Use MMDVM_Bridge.

You think you have problems with Brandmeister wait till you link wires-x  into the system. For two years everything was fine until most software wants to use the wires-x

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Gary, KE8O <ke8o.gary@...>
Sent: Wednesday, February 12, 2020 4:02:49 AM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] need to find a way to link hblink or ysf or mmdvmbridge to wires x room
 
Steve, 

Thanks for getting it back on the radar. If I had to prioritize the two issues I’m experiencing it would be 1) minimum TX duration setting in MB (to stop our random BM user block message) and 2) DMR audio level difference.

73, 
...Gary

Re: need to find a way to link hblink or ysf or mmdvmbridge to wires x room

Gary, KE8O
 

Steve, 

Thanks for getting it back on the radar. If I had to prioritize the two issues I’m experiencing it would be 1) minimum TX duration setting in MB (to stop our random BM user block message) and 2) DMR audio level difference.

73, 
...Gary
Re: need to find a way to link hblink or ysf or mmdvmbridge to wires x room

Gary, KE8O
 

Ernie, 

Thanks for your response. What is the reason behind using the OpenSpot 2 to bridge your WiresX to DMR vs YSF?  Our random BM user blocked message is our biggest annoyance because once it starts it follows any transmissions on the room until we stop the bridge or there is an hour without a activity. We have one user who triggers it anytime they key up. 


73,
...Gary, KE8O 
Re: Nxdn to Nxcore

James Riley kb9tzq
 

I have tried that but then it shuts off on my link to brandmiester


On Mon, Feb 10, 2020 at 1:23 PM Scott Evans <vk7hse@...> wrote:

At the end of NXDNReflector.ini you will need to put the IP to the NXCore server

[NXCore] Enabled=1 Address=110.232.114.40 #Address=44.131.4.1 TGEnable=5057

TGDisable=3456

Debug=0

In this example my nxdn reflector is connected to the VKCore service.
Re: Nxdn to Nxcore

Scott Evans
 

At the end of NXDNReflector.ini you will need to put the IP to the NXCore server

[NXCore] Enabled=1 Address=110.232.114.40 #Address=44.131.4.1 TGEnable=5057

TGDisable=3456

Debug=0

In this example my nxdn reflector is connected to the VKCore service.
Re: Nxdn to Nxcore

James Riley kb9tzq
 

I already talk to them it's something to do with one of the files on my end i just taught I would ask since there alot of guys setup Nxdn Reflector  threw dvswitch like I did that might point me in the right direction 
Re: Nxdn to Nxcore

Steve N4IRS
 

Your best option would be to ask the admins of Nxcore. This has nothing to do with DVSwitch software.

Steve N4IRS

On 2/9/20 8:20 PM, James Riley kb9tzq wrote:
Hello I have a Nxdn Reflector how do I get it to connect to Nxcore I have already talk to one of the admins to add it just need to know what to do on my side
3281 - 3300 of 9132