Date   
alll star help

clayton
 

hi  i  new to this i just put this on my pi i can get ecolink to long in but can not conet to it and all so i see dmr working but all star will not work this is the file a flower
https://4x5mg.net/2018/07/16/allstar-to-dmr-bridge/
ps can any have a look at i have ssh working if some has some spar time to look at it

thank you
vk7zcr
vk7zcr@...
0466588193

Re: Time Slot separate networks?

Andrew Lynch
 

Another way to do it is at the repeater level if you have the ability to use DMRGateway (i.e. on Pi-Star). I am doing this on my repeater and doing some TGRewrite rules to direct talkgroups to one network or another. That way if you had multiple repeaters, and one person wanted to key up a talkgroup, it wouldn't tie up the whole network of repeaters with that one talkgroup; it would be on one specific repeater.

If you are using a non-Pi-Star repeater (Moto, Hytera, etc) then the rules.py solution that has been mentioned would be the best route.

-Andy, KDØIOE

On Wed, Feb 19, 2020 at 3:02 PM Kevin Halton <Khalton@...> wrote:
Put all of bm talkgroups on One slot and the repeater network on the other time slot in rules.py


On Feb 19, 2020, at 3:54 PM, Skyler Fennell <electricity440@...> wrote:


Home brew DMR repeater. 

Is it possible to change the network based on time slot? 

For example, I would like TS1 to be connected to my HBLINK server to host all of the local DMR repeaters, and TS2 to be connected to the brandmeister network for people to play with. 




--
Andrew Lynch (KD0IOE)
lurch89@...

Re: ERDN Test Network - a DVSwitch "Playground"

inmarex@...
 

Steve
http://test.erdn.net:8080/ - link is broken 

Ben
KN4MSH

Re: Time Slot separate networks?

Kevin Halton
 

Put all of bm talkgroups on One slot and the repeater network on the other time slot in rules.py


On Feb 19, 2020, at 3:54 PM, Skyler Fennell <electricity440@...> wrote:


Home brew DMR repeater. 

Is it possible to change the network based on time slot? 

For example, I would like TS1 to be connected to my HBLINK server to host all of the local DMR repeaters, and TS2 to be connected to the brandmeister network for people to play with. 


Re: Time Slot separate networks?

JJ Cummings
 

That’s all trivially done in your rules file, that is what defines what TG gots to what TS and to / from what system.

Sent from the iRoad

On Feb 19, 2020, at 13:54, Skyler Fennell <electricity440@...> wrote:


Home brew DMR repeater. 

Is it possible to change the network based on time slot? 

For example, I would like TS1 to be connected to my HBLINK server to host all of the local DMR repeaters, and TS2 to be connected to the brandmeister network for people to play with. 


Time Slot separate networks?

Skyler Fennell
 

Home brew DMR repeater. 

Is it possible to change the network based on time slot? 

For example, I would like TS1 to be connected to my HBLINK server to host all of the local DMR repeaters, and TS2 to be connected to the brandmeister network for people to play with. 


Re: Problems with MMDVM_Bridge timing out

Eric-K6KWB
 

Here is my working samples, hope its help. Do you have any log to start with?

You should have a latest version of MB to connect to XLX:
https://github.com/DVSwitch/MMDVM_Bridge/tree/master/bin

log version sample:
M: 2020-01-25 02:13:55.953 MMDVM_Bridge-20191105_V1.4.1 is starting
 
MB.ini (sample) for XLX side:

[DMR Network]
Enable=1
Address="XLX dns name" or IP
Port=62030
Jitter=360
Local=62033
Password=passw0rd
# for DMR+ see https://github.com/DVSwitch/MMDVM_Bridge/blob/master/DOC/DMRplus_startup_options.md
# for XLX the syntax is: Options=XLX:4009
Options=XLX:4001
Slot1=0
Slot2=1
Debug=0

73, Eric
 

Re: all star

Brad N8PC
 

do you have a allstar node #?

On 2/18/2020 3:30 AM, clayton wrote:

Hi I just install this on a raspberry pi

 https://4x5mg.net/2018/07/16/allstar-to-dmr-bridge/

I can get ecolink to comet and and dmr  but not all star  and all so the bight from one to the over

Can any sper some to to long    and have a look at what done woring

 

Sent from Mail for Windows 10

 


Re: Problems with MMDVM_Bridge timing out

 

Local ports should be different. 



Sent from my Samsung Galaxy smartphone.



-------- Original message --------
From: Bryan Jackson <beej-uk@...>
Date: 19/02/2020 09:45 (GMT+00:00)
To: main@DVSwitch.groups.io
Subject: [DVSwitch] Problems with MMDVM_Bridge timing out

So I have installed two instances of MMDVM_Bridge to acheive and XLX to DMR Bridge but I am having stability problems.   Here is is the layout.
XLXd ->MMDVM_Bridge-XLX->MMDVM_Bridge-BM->Brandmeister.  
Both instances keep timing out the connection and reconnecting to the masters every few minutes .

I have used YSF2DMR to connect to both XLXd and Brandmeister and the connection is stable
MMDVM_Bridge version is 1.4-20200110-8.

Any Ideas where to start looking ?

Problems with MMDVM_Bridge timing out

Bryan Jackson
 

So I have installed two instances of MMDVM_Bridge to acheive and XLX to DMR Bridge but I am having stability problems.   Here is is the layout.
XLXd ->MMDVM_Bridge-XLX->MMDVM_Bridge-BM->Brandmeister.  
Both instances keep timing out the connection and reconnecting to the masters every few minutes .

I have used YSF2DMR to connect to both XLXd and Brandmeister and the connection is stable
MMDVM_Bridge version is 1.4-20200110-8.

Any Ideas where to start looking ?

all star

clayton
 

Hi I just install this on a raspberry pi

 https://4x5mg.net/2018/07/16/allstar-to-dmr-bridge/

I can get ecolink to comet and and dmr  but not all star  and all so the bight from one to the over

Can any sper some to to long    and have a look at what done woring

 

Sent from Mail for Windows 10

 

Re: Dvswitch app.. can not connect?

Steve N4IRS
 

Charles,
If I understand the question you want to connect to 2 different nodes. I assume from the no computer comment, you do not have a node of your own. If I have this correct, you would need the node owners to grant you access to their nodes from DVSwitch Mobile. So in short rather then connecting to your node and then to their node, you would connect directly to their node.

73, Steve N4IRS

On 2/17/20 10:28 PM, Charles Fraga wrote:
Is it possible to set up the dvswitch app on an android to link to a specific node (45685, 45882) without having a computer. I am a truck driver and only have a phone and a tablet. Can someone explain what should be in each line for the account on the app. 

Thanks KJ7MIJ 73

Dvswitch app.. can not connect?

Charles Fraga <cfraga1978@...>
 

Is it possible to set up the dvswitch app on an android to link to a specific node (45685, 45882) without having a computer. I am a truck driver and only have a phone and a tablet. Can someone explain what should be in each line for the account on the app. 

Thanks KJ7MIJ 73

Re: BM to XLX via MMDVM_Bridge - Doc version 2.0

Bryan Jackson
 

Hi Steve did you ever update the doc ?  Looking at implement this solution whilst waiting for DM to create the XLX interlink.   Basically I want to connect XLX070A to BM TG2345974.   Any suggested configs or alternative methods of achieving this ?   My eventual aim is to also include Echolink so looking and adding a Allstarlink server (which will run on seprate server on same LAN) into the equation later with an MMDVM_Bridge hooking into XLX070A.

Also to add to the equation I currently have running on the same server another ysfreflector GB COVARS that uses YSF2DMR to currently connect GB COVARS to BM TG2345974.

So current setup is
GB COVARS (YSFreflector) -> YSF2DMR -> BM TG2345974 with XLX070 running on same server with no connections.
Plan is to do this to keep GB COVARS so following this arrangment on server 1
GB COVARS (YSFreflector) -> YSF2DMR -> XLX070A -> MB-XLX -> MB-BM -> BM TG2345974
And on server 2
ECHOLINK -> Allstarlink -> md380emu - > MB - XLX070A(which runs on server 1)
Is this config possible? Can this all be ran on one server or would it be better to keep them separate ?

Re: dash board

Raul cruz
 

The other guy said that he was a problem with the software. I had to take it off wait until the new. Update cuz I wasn't being able to communicate on the dmr or anything else.

Sent from my T-Mobile 4G LTE Device


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of ve6gcd@... <ve6gcd@...>
Sent: Friday, February 14, 2020 9:47:48 AM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] dash board
 
I am having the same issue, I noticed this after reinstall from server crash. It was on PHP 7.3 when it happened. Upgrading to PHP 7.4 did not help either. Ran auto-refresh add-on in Chrome with 1 second setting for the time being.

Re: dash board

ve6gcd@...
 

I am having the same issue, I noticed this after reinstall from server crash. It was on PHP 7.3 when it happened. Upgrading to PHP 7.4 did not help either. Ran auto-refresh add-on in Chrome with 1 second setting for the time being.

Re: Documentation

Steve N4IRS
 

Jay,
No, DMRGateway is not covered because most of the time it is not used.
As to your DMR not working, all I can say is check your configuration.

Steve N4IRS

On 2/13/20 10:27 PM, Jay wrote:
I discovered that the documentation does not cover the editing of DMRGateway.ini, nor does "systemctl enable dmrgateway" work.  Maybe it is not supposed to.  However DMR is not working on my image, so I am eliminating possible causes.

Does this mean that this is covered elsewhere or was it left out?  If left on because it isn't needed, maybe we should note that.  I need to dig into it more to see if I understand what is happening with DMR.
--

jb   N4NQY

Re: Documentation

Jay
 

I discovered that the documentation does not cover the editing of DMRGateway.ini, nor does "systemctl enable dmrgateway" work.  Maybe it is not supposed to.  However DMR is not working on my image, so I am eliminating possible causes.

Does this mean that this is covered elsewhere or was it left out?  If left on because it isn't needed, maybe we should note that.  I need to dig into it more to see if I understand what is happening with DMR.
--

jb   N4NQY

dash board

Raul cruz
 

hi having problems with dvswitch the dash board was working fine it was showing  who was connected all the connections with my dmr id.######## 

but some how now is only showing  this lines only. am I missing something on the settings.thankyou  any help will be appreciated 
RAUL CRUZ     KB5HTB

Documentation

Jay
 

What a great job.  I just ran through the whole process.  I only had one glitch.  the collectProcessDataFiles gave me an ASL node list not valid.  Not a big deal but I was not expecting that.

My next step is to check out the mobile app documentation.

I actually understood the steps, the edits that had to be made, etc.  Kinda foolproof.  Thanks again.  It really cleared up a lot of questions and issues I had been trying to solve on my own.

You might look at draw.io for a free drawing tool.  I have use it for flowcharts, etc and it is easy.

--

jb   N4NQY