Date   

Re: Analog_Bridge gain

Mike Zingman - N4IRR
 

I also see that the DMR->ASL AUDIO_USE_GAIN was fixed at 2.0.  This has now been updated as well.


Re: Analog_Bridge gain

Mike Zingman - N4IRR
 

I see the issue.  The ini file would lead you to use the wrong name for the setting property.  Use AUDIO_USE_GAIN rather than 
AUDIO_GAIN . I have updated the sample ini file, but it has not been rolled out yet.


Analog_Bridge gain

JJ Cummings
 

Some quick questions regarding analog bridge and gain (types)/values.   I have the Analog_Bridge up and running well and have been able to configure the AGC value to facilitate pretty decent levels from DMR -> Analog.  On the Analog -> DMR side of things however I have been unable to see any real change in audio level (it's presently too high from Analog) by adjusting the following values.  I'm curious what dmrAudio value is the best and then the dmrGain value 0 to 1 does not seem to make a difference?  

dmrAudio = AUDIO_UNITY ; Audio from ASL (AUDIO_UNITY, AUDIO_GAIN, AUDIO_BPF)
dmrGain = 0.35 ; Gain factor of audio from ASL (0.0-1.0)

Is there a place that I can read about the different dmrAudio values to understand what their differences/benefits etc are?

JJC
N0PKT
 


Re: Current Status and admin request

Rob WX1N
 

Keep up the good work!

Rob, WX1N



From: Steve N4IRS <szingman@...>
Sent: December 10, 2017 6:32:11 PM EST
To: DVSwitch@groups.io
Subject: [DVSwitch] Current Status and admin request

It's been quiet for a while, so I guess it's time for a update in no real order.
Analog_Bridge is getting another refactor. Some functions are being pushed out to external programs or libraries. This should help reduce the number of times it will have to be visited.
The serial routines that talk to locally connected Vocoders is being looked at.
Native support for Vocoders other the NWDigital ThumDB.
More descriptive and consistent naming of variables in Analog_Bridge.ini
I have setup a Debian repository for AllStarLink. I will be adding analog_bridge and other programs to the repository. This will allow for apt-get install Analog_Bridge...

HB_Bridge and IPSC_Bridge are being merged into their respective Master repositories. This will simplify installation and support.
Both HB_Bridge and IPSC_Bridge are getting a few bug fixes (ongoing)
Fixes for HB_Parrot
Changes for communications with servers other the BM to be implemented.

Additional Partners will be available: These bridges are going to go through changes over time. The method used to connect to external networks (P-25, YSF and D-Star) will change.
P25_Bridge
YSF_Bridge 
D-Star Bridge
These bridges are going to go through changes over time. The method used to connect to external networks (P-25, YSF and D-Star) will change.

I have added a couple of simple documents in the file section. These should help people understand how to configure communications between partners. I will convert them to PDF next week.
https://groups.io/g/DVSwitch/files/HB_AB_ASL.txt
https://groups.io/g/DVSwitch/files/IPSC_AB_ASL.txt

Lat but not least, PLEASE change you display names to include your first name and call sign. Please! Please, did I say please?

73, Steve N4IRS






 


Current Status and admin request

Steve N4IRS
 
Edited

It's been quiet for a while, so I guess it's time for a update in no real order.
Analog_Bridge is getting another refactor. Some functions are being pushed out to external programs or libraries. This should help reduce the number of times it will have to be visited.
The serial routines that talk to locally connected Vocoders is being looked at.
Native support for Vocoders other then the NWDigital ThumDB.
More descriptive and consistent naming of variables in Analog_Bridge.ini
I have setup a Debian repository for AllStarLink. I will be adding analog_bridge and other programs to the repository. This will allow for apt-get install Analog_Bridge...

HB_Bridge and IPSC_Bridge are being merged into their respective Master repositories. This will simplify installation and support.
Both HB_Bridge and IPSC_Bridge are getting a few bug fixes (ongoing)
Fixes for HB_Parrot
Changes for communications with servers other the BM to be implemented.

Additional Partners will be available: These bridges are going to go through changes over time.
P25_Bridge
YSF_Bridge 
D-Star Bridge
These bridges are going to go through changes over time. The method used to connect to external networks (P-25, YSF and D-Star) will change.

I have added a couple of simple documents in the file section. These should help people understand how to configure communications between partners. I will convert them to PDF next week.
https://groups.io/g/DVSwitch/files/HB_AB_ASL.txt
https://groups.io/g/DVSwitch/files/IPSC_AB_ASL.txt

Lat but not least, PLEASE change you display names to include your first name and call sign. Please! Please, did I say please?

73, Steve N4IRS





Re: kill HB_LINK

Bob kc2cwt
 

Ok thanks hope that fixed the drops


On 12/07/2017 07:29 PM, Steve N4IRS wrote:
Nope.

On 12/07/2017 07:29 PM, Bob kc2cwt wrote:

Nothing to config in it ?


On 12/07/2017 07:28 PM, Steve N4IRS wrote:
Yes, that will be fine.

On 12/07/2017 07:27 PM, Bob kc2cwt wrote:

I made a new dir called dmr_utils-master i copy the dir for Github change properties to 755 and ran the install.sh

Was this the right way to do this


On 12/07/2017 07:21 PM, Steve N4IRS wrote:
It won't hurt to do a bunch of apt-gets on stuff you already have installed.

On 12/07/2017 07:20 PM, Bob kc2cwt wrote:

I ran the install.sh is thair more i need to do


On 12/07/2017 12:01 PM, Steve N4IRS wrote:
Sorry, I got tied up.
<https://github.com/n0mjs710/dmr_utils>

run the install.sh

On 12/7/2017 11:56 AM, Bob kc2cwt wrote:
Looking for a little help I can't find any documentation on how to get DMR utilities installed

KC2CWT
Bob Schneider
kc2cwt@...
(914)497-5502

-----Original Message-----
From: Bob kc2cwt <kc2cwt@...>
To: DVSwitch@groups.io
Sent: Wed, 06 Dec 2017 7:51 PM
Subject: Re: [DVSwitch] kill HB_LINK

Ok , it is working , Time for some more reading



On 12/06/2017 07:49 PM, Corey Dean N3FE wrote:
> Dmr_utils is required to run those utilities.
>
> Sent from my iPhone
>
>> On Dec 6, 2017, at 7:42 PM, Bob kc2cwt <kc2cwt@...> wrote:
>>
>> I do not have DMR-utils
>>
>>> On 12/06/2017 07:41 PM, Corey Dean N3FE wrote:
>>> Did you update dmr-utils?
>>>
>>> Sent from my iPhone
>>>
>>>> On Dec 6, 2017, at 7:04 PM, Bob kc2cwt <kc2cwt@...> wrote:
>>>>
>>>> So i have up dated the software , After run for sum time ,
>>>>
>>>> I see data coming in to HB_link but not making it to my Open spot .
>>>>
>>>> and link to C bridge is good ,
>>>>
>>>> To make it work , I have to kill HB_link and restart it . then it will work some time as short as a hr or as long as 2 days .
>>>>
>>>> I have a attached the end of the log file .
>>>>
>>>> --
>>>> Bob KC2CWT
>>>> kc2cwt@...
>>>> (914)497-5502
>>>>
>>>>
>>>>
>>>>
>>>> <HBlink.log>
>> --
>> Bob KC2CWT
>> kc2cwt@...
>> (914)497-5502
>>
>>
>>
>>
>
>

--
Bob KC2CWT
kc2cwt@...
(914)497-5502






-- 
Bob KC2CWT
kc2cwt@...
(914)497-5502


-- 
Bob KC2CWT
kc2cwt@...
(914)497-5502


-- 
Bob KC2CWT
kc2cwt@...
(914)497-5502


-- 
Bob KC2CWT
kc2cwt@...
(914)497-5502


Re: kill HB_LINK

Steve N4IRS
 

Nope.

On 12/07/2017 07:29 PM, Bob kc2cwt wrote:

Nothing to config in it ?


On 12/07/2017 07:28 PM, Steve N4IRS wrote:
Yes, that will be fine.

On 12/07/2017 07:27 PM, Bob kc2cwt wrote:

I made a new dir called dmr_utils-master i copy the dir for Github change properties to 755 and ran the install.sh

Was this the right way to do this


On 12/07/2017 07:21 PM, Steve N4IRS wrote:
It won't hurt to do a bunch of apt-gets on stuff you already have installed.

On 12/07/2017 07:20 PM, Bob kc2cwt wrote:

I ran the install.sh is thair more i need to do


On 12/07/2017 12:01 PM, Steve N4IRS wrote:
Sorry, I got tied up.
<https://github.com/n0mjs710/dmr_utils>

run the install.sh

On 12/7/2017 11:56 AM, Bob kc2cwt wrote:
Looking for a little help I can't find any documentation on how to get DMR utilities installed

KC2CWT
Bob Schneider
kc2cwt@...
(914)497-5502

-----Original Message-----
From: Bob kc2cwt <kc2cwt@...>
To: DVSwitch@groups.io
Sent: Wed, 06 Dec 2017 7:51 PM
Subject: Re: [DVSwitch] kill HB_LINK

Ok , it is working , Time for some more reading



On 12/06/2017 07:49 PM, Corey Dean N3FE wrote:
> Dmr_utils is required to run those utilities.
>
> Sent from my iPhone
>
>> On Dec 6, 2017, at 7:42 PM, Bob kc2cwt <kc2cwt@...> wrote:
>>
>> I do not have DMR-utils
>>
>>> On 12/06/2017 07:41 PM, Corey Dean N3FE wrote:
>>> Did you update dmr-utils?
>>>
>>> Sent from my iPhone
>>>
>>>> On Dec 6, 2017, at 7:04 PM, Bob kc2cwt <kc2cwt@...> wrote:
>>>>
>>>> So i have up dated the software , After run for sum time ,
>>>>
>>>> I see data coming in to HB_link but not making it to my Open spot .
>>>>
>>>> and link to C bridge is good ,
>>>>
>>>> To make it work , I have to kill HB_link and restart it . then it will work some time as short as a hr or as long as 2 days .
>>>>
>>>> I have a attached the end of the log file .
>>>>
>>>> --
>>>> Bob KC2CWT
>>>> kc2cwt@...
>>>> (914)497-5502
>>>>
>>>>
>>>>
>>>>
>>>> <HBlink.log>
>> --
>> Bob KC2CWT
>> kc2cwt@...
>> (914)497-5502
>>
>>
>>
>>
>
>

--
Bob KC2CWT
kc2cwt@...
(914)497-5502






-- 
Bob KC2CWT
kc2cwt@...
(914)497-5502


-- 
Bob KC2CWT
kc2cwt@...
(914)497-5502


-- 
Bob KC2CWT
kc2cwt@...
(914)497-5502


Re: kill HB_LINK

Bob kc2cwt
 

Nothing to config in it ?


On 12/07/2017 07:28 PM, Steve N4IRS wrote:
Yes, that will be fine.

On 12/07/2017 07:27 PM, Bob kc2cwt wrote:

I made a new dir called dmr_utils-master i copy the dir for Github change properties to 755 and ran the install.sh

Was this the right way to do this


On 12/07/2017 07:21 PM, Steve N4IRS wrote:
It won't hurt to do a bunch of apt-gets on stuff you already have installed.

On 12/07/2017 07:20 PM, Bob kc2cwt wrote:

I ran the install.sh is thair more i need to do


On 12/07/2017 12:01 PM, Steve N4IRS wrote:
Sorry, I got tied up.
<https://github.com/n0mjs710/dmr_utils>

run the install.sh

On 12/7/2017 11:56 AM, Bob kc2cwt wrote:
Looking for a little help I can't find any documentation on how to get DMR utilities installed

KC2CWT
Bob Schneider
kc2cwt@...
(914)497-5502

-----Original Message-----
From: Bob kc2cwt <kc2cwt@...>
To: DVSwitch@groups.io
Sent: Wed, 06 Dec 2017 7:51 PM
Subject: Re: [DVSwitch] kill HB_LINK

Ok , it is working , Time for some more reading



On 12/06/2017 07:49 PM, Corey Dean N3FE wrote:
> Dmr_utils is required to run those utilities.
>
> Sent from my iPhone
>
>> On Dec 6, 2017, at 7:42 PM, Bob kc2cwt <kc2cwt@...> wrote:
>>
>> I do not have DMR-utils
>>
>>> On 12/06/2017 07:41 PM, Corey Dean N3FE wrote:
>>> Did you update dmr-utils?
>>>
>>> Sent from my iPhone
>>>
>>>> On Dec 6, 2017, at 7:04 PM, Bob kc2cwt <kc2cwt@...> wrote:
>>>>
>>>> So i have up dated the software , After run for sum time ,
>>>>
>>>> I see data coming in to HB_link but not making it to my Open spot .
>>>>
>>>> and link to C bridge is good ,
>>>>
>>>> To make it work , I have to kill HB_link and restart it . then it will work some time as short as a hr or as long as 2 days .
>>>>
>>>> I have a attached the end of the log file .
>>>>
>>>> --
>>>> Bob KC2CWT
>>>> kc2cwt@...
>>>> (914)497-5502
>>>>
>>>>
>>>>
>>>>
>>>> <HBlink.log>
>> --
>> Bob KC2CWT
>> kc2cwt@...
>> (914)497-5502
>>
>>
>>
>>
>
>

--
Bob KC2CWT
kc2cwt@...
(914)497-5502






-- 
Bob KC2CWT
kc2cwt@...
(914)497-5502


-- 
Bob KC2CWT
kc2cwt@...
(914)497-5502


-- 
Bob KC2CWT
kc2cwt@...
(914)497-5502


Re: kill HB_LINK

Steve N4IRS
 

Yes, that will be fine.

On 12/07/2017 07:27 PM, Bob kc2cwt wrote:

I made a new dir called dmr_utils-master i copy the dir for Github change properties to 755 and ran the install.sh

Was this the right way to do this


On 12/07/2017 07:21 PM, Steve N4IRS wrote:
It won't hurt to do a bunch of apt-gets on stuff you already have installed.

On 12/07/2017 07:20 PM, Bob kc2cwt wrote:

I ran the install.sh is thair more i need to do


On 12/07/2017 12:01 PM, Steve N4IRS wrote:
Sorry, I got tied up.
<https://github.com/n0mjs710/dmr_utils>

run the install.sh

On 12/7/2017 11:56 AM, Bob kc2cwt wrote:
Looking for a little help I can't find any documentation on how to get DMR utilities installed

KC2CWT
Bob Schneider
kc2cwt@...
(914)497-5502

-----Original Message-----
From: Bob kc2cwt <kc2cwt@...>
To: DVSwitch@groups.io
Sent: Wed, 06 Dec 2017 7:51 PM
Subject: Re: [DVSwitch] kill HB_LINK

Ok , it is working , Time for some more reading



On 12/06/2017 07:49 PM, Corey Dean N3FE wrote:
> Dmr_utils is required to run those utilities.
>
> Sent from my iPhone
>
>> On Dec 6, 2017, at 7:42 PM, Bob kc2cwt <kc2cwt@...> wrote:
>>
>> I do not have DMR-utils
>>
>>> On 12/06/2017 07:41 PM, Corey Dean N3FE wrote:
>>> Did you update dmr-utils?
>>>
>>> Sent from my iPhone
>>>
>>>> On Dec 6, 2017, at 7:04 PM, Bob kc2cwt <kc2cwt@...> wrote:
>>>>
>>>> So i have up dated the software , After run for sum time ,
>>>>
>>>> I see data coming in to HB_link but not making it to my Open spot .
>>>>
>>>> and link to C bridge is good ,
>>>>
>>>> To make it work , I have to kill HB_link and restart it . then it will work some time as short as a hr or as long as 2 days .
>>>>
>>>> I have a attached the end of the log file .
>>>>
>>>> --
>>>> Bob KC2CWT
>>>> kc2cwt@...
>>>> (914)497-5502
>>>>
>>>>
>>>>
>>>>
>>>> <HBlink.log>
>> --
>> Bob KC2CWT
>> kc2cwt@...
>> (914)497-5502
>>
>>
>>
>>
>
>

--
Bob KC2CWT
kc2cwt@...
(914)497-5502






-- 
Bob KC2CWT
kc2cwt@...
(914)497-5502


-- 
Bob KC2CWT
kc2cwt@...
(914)497-5502


Re: kill HB_LINK

Bob kc2cwt
 

I made a new dir called dmr_utils-master i copy the dir for Github change properties to 755 and ran the install.sh

Was this the right way to do this


On 12/07/2017 07:21 PM, Steve N4IRS wrote:
It won't hurt to do a bunch of apt-gets on stuff you already have installed.

On 12/07/2017 07:20 PM, Bob kc2cwt wrote:

I ran the install.sh is thair more i need to do


On 12/07/2017 12:01 PM, Steve N4IRS wrote:
Sorry, I got tied up.
<https://github.com/n0mjs710/dmr_utils>

run the install.sh

On 12/7/2017 11:56 AM, Bob kc2cwt wrote:
Looking for a little help I can't find any documentation on how to get DMR utilities installed

KC2CWT
Bob Schneider
kc2cwt@...
(914)497-5502

-----Original Message-----
From: Bob kc2cwt <kc2cwt@...>
To: DVSwitch@groups.io
Sent: Wed, 06 Dec 2017 7:51 PM
Subject: Re: [DVSwitch] kill HB_LINK

Ok , it is working , Time for some more reading



On 12/06/2017 07:49 PM, Corey Dean N3FE wrote:
> Dmr_utils is required to run those utilities.
>
> Sent from my iPhone
>
>> On Dec 6, 2017, at 7:42 PM, Bob kc2cwt <kc2cwt@...> wrote:
>>
>> I do not have DMR-utils
>>
>>> On 12/06/2017 07:41 PM, Corey Dean N3FE wrote:
>>> Did you update dmr-utils?
>>>
>>> Sent from my iPhone
>>>
>>>> On Dec 6, 2017, at 7:04 PM, Bob kc2cwt <kc2cwt@...> wrote:
>>>>
>>>> So i have up dated the software , After run for sum time ,
>>>>
>>>> I see data coming in to HB_link but not making it to my Open spot .
>>>>
>>>> and link to C bridge is good ,
>>>>
>>>> To make it work , I have to kill HB_link and restart it . then it will work some time as short as a hr or as long as 2 days .
>>>>
>>>> I have a attached the end of the log file .
>>>>
>>>> --
>>>> Bob KC2CWT
>>>> kc2cwt@...
>>>> (914)497-5502
>>>>
>>>>
>>>>
>>>>
>>>> <HBlink.log>
>> --
>> Bob KC2CWT
>> kc2cwt@...
>> (914)497-5502
>>
>>
>>
>>
>
>

--
Bob KC2CWT
kc2cwt@...
(914)497-5502






-- 
Bob KC2CWT
kc2cwt@...
(914)497-5502


-- 
Bob KC2CWT
kc2cwt@...
(914)497-5502


Re: kill HB_LINK

Steve N4IRS
 

It won't hurt to do a bunch of apt-gets on stuff you already have installed.

On 12/07/2017 07:20 PM, Bob kc2cwt wrote:

I ran the install.sh is thair more i need to do


On 12/07/2017 12:01 PM, Steve N4IRS wrote:
Sorry, I got tied up.
<https://github.com/n0mjs710/dmr_utils>

run the install.sh

On 12/7/2017 11:56 AM, Bob kc2cwt wrote:
Looking for a little help I can't find any documentation on how to get DMR utilities installed

KC2CWT
Bob Schneider
kc2cwt@...
(914)497-5502

-----Original Message-----
From: Bob kc2cwt <kc2cwt@...>
To: DVSwitch@groups.io
Sent: Wed, 06 Dec 2017 7:51 PM
Subject: Re: [DVSwitch] kill HB_LINK

Ok , it is working , Time for some more reading



On 12/06/2017 07:49 PM, Corey Dean N3FE wrote:
> Dmr_utils is required to run those utilities.
>
> Sent from my iPhone
>
>> On Dec 6, 2017, at 7:42 PM, Bob kc2cwt <kc2cwt@...> wrote:
>>
>> I do not have DMR-utils
>>
>>> On 12/06/2017 07:41 PM, Corey Dean N3FE wrote:
>>> Did you update dmr-utils?
>>>
>>> Sent from my iPhone
>>>
>>>> On Dec 6, 2017, at 7:04 PM, Bob kc2cwt <kc2cwt@...> wrote:
>>>>
>>>> So i have up dated the software , After run for sum time ,
>>>>
>>>> I see data coming in to HB_link but not making it to my Open spot .
>>>>
>>>> and link to C bridge is good ,
>>>>
>>>> To make it work , I have to kill HB_link and restart it . then it will work some time as short as a hr or as long as 2 days .
>>>>
>>>> I have a attached the end of the log file .
>>>>
>>>> --
>>>> Bob KC2CWT
>>>> kc2cwt@...
>>>> (914)497-5502
>>>>
>>>>
>>>>
>>>>
>>>> <HBlink.log>
>> --
>> Bob KC2CWT
>> kc2cwt@...
>> (914)497-5502
>>
>>
>>
>>
>
>

--
Bob KC2CWT
kc2cwt@...
(914)497-5502






-- 
Bob KC2CWT
kc2cwt@...
(914)497-5502


Re: kill HB_LINK

Bob kc2cwt
 

I ran the install.sh is thair more i need to do


On 12/07/2017 12:01 PM, Steve N4IRS wrote:
Sorry, I got tied up.
<https://github.com/n0mjs710/dmr_utils>

run the install.sh

On 12/7/2017 11:56 AM, Bob kc2cwt wrote:
Looking for a little help I can't find any documentation on how to get DMR utilities installed

KC2CWT
Bob Schneider
kc2cwt@...
(914)497-5502

-----Original Message-----
From: Bob kc2cwt <kc2cwt@...>
To: DVSwitch@groups.io
Sent: Wed, 06 Dec 2017 7:51 PM
Subject: Re: [DVSwitch] kill HB_LINK

Ok , it is working , Time for some more reading



On 12/06/2017 07:49 PM, Corey Dean N3FE wrote:
> Dmr_utils is required to run those utilities.
>
> Sent from my iPhone
>
>> On Dec 6, 2017, at 7:42 PM, Bob kc2cwt <kc2cwt@...> wrote:
>>
>> I do not have DMR-utils
>>
>>> On 12/06/2017 07:41 PM, Corey Dean N3FE wrote:
>>> Did you update dmr-utils?
>>>
>>> Sent from my iPhone
>>>
>>>> On Dec 6, 2017, at 7:04 PM, Bob kc2cwt <kc2cwt@...> wrote:
>>>>
>>>> So i have up dated the software , After run for sum time ,
>>>>
>>>> I see data coming in to HB_link but not making it to my Open spot .
>>>>
>>>> and link to C bridge is good ,
>>>>
>>>> To make it work , I have to kill HB_link and restart it . then it will work some time as short as a hr or as long as 2 days .
>>>>
>>>> I have a attached the end of the log file .
>>>>
>>>> --
>>>> Bob KC2CWT
>>>> kc2cwt@...
>>>> (914)497-5502
>>>>
>>>>
>>>>
>>>>
>>>> <HBlink.log>
>> --
>> Bob KC2CWT
>> kc2cwt@...
>> (914)497-5502
>>
>>
>>
>>
>
>

--
Bob KC2CWT
kc2cwt@...
(914)497-5502






-- 
Bob KC2CWT
kc2cwt@...
(914)497-5502


Re: kill HB_LINK

Bob kc2cwt
 

Thanks

KC2CWT
Bob Schneider
kc2cwt@...
(914)497-5502


-----Original Message-----
From: Steve N4IRS <szingman@...>
To: DVSwitch@groups.io
Sent: Thu, 07 Dec 2017 11:58 AM
Subject: Re: [DVSwitch] kill HB_LINK

Sorry, I got tied up.
<https://github.com/n0mjs710/dmr_utils>

run the install.sh

On 12/7/2017 11:56 AM, Bob kc2cwt wrote:
Looking for a little help I can't find any documentation on how to get DMR utilities installed

KC2CWT
Bob Schneider
kc2cwt@...
(914)497-5502

-----Original Message-----
From: Bob kc2cwt <kc2cwt@...>
To: DVSwitch@groups.io
Sent: Wed, 06 Dec 2017 7:51 PM
Subject: Re: [DVSwitch] kill HB_LINK

Ok , it is working , Time for some more reading



On 12/06/2017 07:49 PM, Corey Dean N3FE wrote:
> Dmr_utils is required to run those utilities.
>
> Sent from my iPhone
>
>> On Dec 6, 2017, at 7:42 PM, Bob kc2cwt <kc2cwt@...> wrote:
>>
>> I do not have DMR-utils
>>
>>> On 12/06/2017 07:41 PM, Corey Dean N3FE wrote:
>>> Did you update dmr-utils?
>>>
>>> Sent from my iPhone
>>>
>>>> On Dec 6, 2017, at 7:04 PM, Bob kc2cwt <kc2cwt@...> wrote:
>>>>
>>>> So i have up dated the software , After run for sum time ,
>>>>
>>>> I see data coming in to HB_link but not making it to my Open spot .
>>>>
>>>> and link to C bridge is good ,
>>>>
>>>> To make it work , I have to kill HB_link and restart it . then it will work some time as short as a hr or as long as 2 days .
>>>>
>>>> I have a attached the end of the log file .
>>>>
>>>> --
>>>> Bob KC2CWT
>>>> kc2cwt@...
>>>> (914)497-5502
>>>>
>>>>
>>>>
>>>>
>>>> <HBlink.log>
>> --
>> Bob KC2CWT
>> kc2cwt@...
>> (914)497-5502
>>
>>
>>
>>
>
>

--
Bob KC2CWT
kc2cwt@...
(914)497-5502






Re: kill HB_LINK

Steve N4IRS
 

Sorry, I got tied up.
<https://github.com/n0mjs710/dmr_utils>

run the install.sh

On 12/7/2017 11:56 AM, Bob kc2cwt wrote:
Looking for a little help I can't find any documentation on how to get DMR utilities installed

KC2CWT
Bob Schneider
kc2cwt@...
(914)497-5502

-----Original Message-----
From: Bob kc2cwt <kc2cwt@...>
To: DVSwitch@groups.io
Sent: Wed, 06 Dec 2017 7:51 PM
Subject: Re: [DVSwitch] kill HB_LINK

Ok , it is working , Time for some more reading



On 12/06/2017 07:49 PM, Corey Dean N3FE wrote:
> Dmr_utils is required to run those utilities.
>
> Sent from my iPhone
>
>> On Dec 6, 2017, at 7:42 PM, Bob kc2cwt <kc2cwt@...> wrote:
>>
>> I do not have DMR-utils
>>
>>> On 12/06/2017 07:41 PM, Corey Dean N3FE wrote:
>>> Did you update dmr-utils?
>>>
>>> Sent from my iPhone
>>>
>>>> On Dec 6, 2017, at 7:04 PM, Bob kc2cwt <kc2cwt@...> wrote:
>>>>
>>>> So i have up dated the software , After run for sum time ,
>>>>
>>>> I see data coming in to HB_link but not making it to my Open spot .
>>>>
>>>> and link to C bridge is good ,
>>>>
>>>> To make it work , I have to kill HB_link and restart it . then it will work some time as short as a hr or as long as 2 days .
>>>>
>>>> I have a attached the end of the log file .
>>>>
>>>> --
>>>> Bob KC2CWT
>>>> kc2cwt@...
>>>> (914)497-5502
>>>>
>>>>
>>>>
>>>>
>>>> <HBlink.log>
>> --
>> Bob KC2CWT
>> kc2cwt@...
>> (914)497-5502
>>
>>
>>
>>
>
>

--
Bob KC2CWT
kc2cwt@...
(914)497-5502






Re: kill HB_LINK

Bob kc2cwt
 

Looking for a little help I can't find any documentation on how to get DMR utilities installed

KC2CWT
Bob Schneider
kc2cwt@...
(914)497-5502


-----Original Message-----
From: Bob kc2cwt <kc2cwt@...>
To: DVSwitch@groups.io
Sent: Wed, 06 Dec 2017 7:51 PM
Subject: Re: [DVSwitch] kill HB_LINK

Ok , it is working , Time for some more reading



On 12/06/2017 07:49 PM, Corey Dean N3FE wrote:
> Dmr_utils is required to run those utilities.
>
> Sent from my iPhone
>
>> On Dec 6, 2017, at 7:42 PM, Bob kc2cwt <kc2cwt@...> wrote:
>>
>> I do not have DMR-utils
>>
>>> On 12/06/2017 07:41 PM, Corey Dean N3FE wrote:
>>> Did you update dmr-utils?
>>>
>>> Sent from my iPhone
>>>
>>>> On Dec 6, 2017, at 7:04 PM, Bob kc2cwt <kc2cwt@...> wrote:
>>>>
>>>> So i have up dated the software , After run for sum time ,
>>>>
>>>> I see data coming in to HB_link but not making it to my Open spot .
>>>>
>>>> and link to C bridge is good ,
>>>>
>>>> To make it work , I have to kill HB_link and restart it . then it will work some time as short as a hr or as long as 2 days .
>>>>
>>>> I have a attached the end of the log file .
>>>>
>>>> --
>>>> Bob KC2CWT
>>>> kc2cwt@...
>>>> (914)497-5502
>>>>
>>>>
>>>>
>>>>
>>>> <HBlink.log>
>> --
>> Bob KC2CWT
>> kc2cwt@...
>> (914)497-5502
>>
>>
>>
>>
>
>

--
Bob KC2CWT
kc2cwt@...
(914)497-5502





Re: kill HB_LINK

Bob kc2cwt
 

Ok , it is working , Time for some more reading

On 12/06/2017 07:49 PM, Corey Dean N3FE wrote:
Dmr_utils is required to run those utilities.

Sent from my iPhone

On Dec 6, 2017, at 7:42 PM, Bob kc2cwt <kc2cwt@kc2cwt.net> wrote:

I do not have DMR-utils

On 12/06/2017 07:41 PM, Corey Dean N3FE wrote:
Did you update dmr-utils?

Sent from my iPhone

On Dec 6, 2017, at 7:04 PM, Bob kc2cwt <kc2cwt@kc2cwt.net> wrote:

So i have up dated the software , After run for sum time ,

I see data coming in to HB_link but not making it to my Open spot .

and link to C bridge is good ,

To make it work , I have to kill HB_link and restart it . then it will work some time as short as a hr or as long as 2 days .

I have a attached the end of the log file .

--
Bob KC2CWT
kc2cwt@kc2cwt.net
(914)497-5502




<HBlink.log>
--
Bob KC2CWT
kc2cwt@kc2cwt.net
(914)497-5502



--
Bob KC2CWT
kc2cwt@kc2cwt.net
(914)497-5502


Re: kill HB_LINK

Corey Dean N3FE <n3fe@...>
 

Dmr_utils is required to run those utilities.

Sent from my iPhone

On Dec 6, 2017, at 7:42 PM, Bob kc2cwt <kc2cwt@kc2cwt.net> wrote:

I do not have DMR-utils

On 12/06/2017 07:41 PM, Corey Dean N3FE wrote:
Did you update dmr-utils?

Sent from my iPhone

On Dec 6, 2017, at 7:04 PM, Bob kc2cwt <kc2cwt@kc2cwt.net> wrote:

So i have up dated the software , After run for sum time ,

I see data coming in to HB_link but not making it to my Open spot .

and link to C bridge is good ,

To make it work , I have to kill HB_link and restart it . then it will work some time as short as a hr or as long as 2 days .

I have a attached the end of the log file .

--
Bob KC2CWT
kc2cwt@kc2cwt.net
(914)497-5502




<HBlink.log>
--
Bob KC2CWT
kc2cwt@kc2cwt.net
(914)497-5502




Re: kill HB_LINK

Bob kc2cwt
 

I do not have DMR-utils

On 12/06/2017 07:41 PM, Corey Dean N3FE wrote:
Did you update dmr-utils?

Sent from my iPhone

On Dec 6, 2017, at 7:04 PM, Bob kc2cwt <kc2cwt@kc2cwt.net> wrote:

So i have up dated the software , After run for sum time ,

I see data coming in to HB_link but not making it to my Open spot .

and link to C bridge is good ,

To make it work , I have to kill HB_link and restart it . then it will work some time as short as a hr or as long as 2 days .

I have a attached the end of the log file .

--
Bob KC2CWT
kc2cwt@kc2cwt.net
(914)497-5502




<HBlink.log>
--
Bob KC2CWT
kc2cwt@kc2cwt.net
(914)497-5502


Re: kill HB_LINK

Corey Dean N3FE <n3fe@...>
 

Did you update dmr-utils?

Sent from my iPhone

On Dec 6, 2017, at 7:04 PM, Bob kc2cwt <kc2cwt@kc2cwt.net> wrote:

So i have up dated the software , After run for sum time ,

I see data coming in to HB_link but not making it to my Open spot .

and link to C bridge is good ,

To make it work , I have to kill HB_link and restart it . then it will work some time as short as a hr or as long as 2 days .

I have a attached the end of the log file .

--
Bob KC2CWT
kc2cwt@kc2cwt.net
(914)497-5502




<HBlink.log>


kill HB_LINK

Bob kc2cwt
 

So i have up dated the software , After run for sum time ,

I see data coming in to HB_link but not making it to my Open spot .

and link to C bridge is good ,

To make it work , I have to kill HB_link and restart it . then it will work some time as short as a hr or as long as 2 days .

I have a attached the end of the log file .

--
Bob KC2CWT
kc2cwt@kc2cwt.net
(914)497-5502

9301 - 9320 of 9882