Date   

Re: RE : Re: [DVSwitch] Link DMR <==> FCSXXX

Doug - W4DBG
 

Bruno,

Thank You.. While I didn't really have anything wrong in my configuration, looking at your setup had me look through things and found that YSFGateway had somehow disappeared.. Not sure how that happened but I got it going and again thanks!

Doug
W4DBG


On Fri, Mar 6, 2020 at 7:51 PM Bruno <ff1ptl@...> wrote:

Hi Doug,

 

I used a connection  MMDVM_Bridge + YSFGateway FCSXXX

 

HBlink-Fr <===>MMDVM_Bridge <====> YSFGateway FCSxxxx

 

File configuration DVSwitch.ini

/opt/MMDVM_Bridge_FCS# more DVSwitch.ini

; MMDVM_Bridge export / import configuration file.

;   This file should be placed along side of MMDVM_Bridge or it can be

;   supplied as a path on the MMDVM_BRIDGE environment variable.

 

; Configure the Quantar Repeater Partner

; Note that the TX and RX ports are already reversed for MMDVM_Bridge <--> Quantar_Bridge

[QUANTAR]

logFilePath = /var/log/Quantar_Bridge.log

Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)

TXPort = 34103                  ; Port to send AMBE TLV frames to (export)

RXPort = 34100                  ; Port to listen on (import)

quantarPort = 1994              ; HDLC frames To/From the Quantar repeater

logLevel = 2                    ; Show messages and above 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal

debug = 0                       ; Debug 0 = off, 1 = on (adds lots of additional messages)

 

; Configure the DMR Partner

; Audio format is AMBE 72 bit

[DMR]

Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)

TXPort = 36100                  ; Port to send AMBE TLV frames to (export)

RXPort = 36103                  ; Port to listen on (import)

Slot = 2                        ; Export slot

 

; Configure the D-Star Partner

; Audio format is AMBE 48 bit (DSAMBE)

[DSTAR]

Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)

TXPort = 32100                  ; Port to send AMBE TLV frames to (export)

RXPort = 32103                  ; Port to listen on (import)

FallbackID = 1234567            ; In case we can not find a valid DMR id in the database, export this one

ExportTG = 9                    ; Which TG to export

Slot = 2                        ; Export slot

 

; Configure the NXDN Partner

; Audio format is AMBE 72 bit

[NXDN]

Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)

TXPort = 33100                  ; Port to send AMBE TLV frames to (export)

RXPort = 33103                  ; Port to listen on (import)

FallbackID = 1234567            ; In case we can not find a valid DMR id in the database, export this one

NXDNFallbackID  = 12345         ; Use this ID when the input DMR ID is not found in the database

Translate = 1234=4321           ; Translate NXDN TG < -- > DMR TG (bidirectional)

Slot = 2                        ; Export slot

 

; Configure the P25 Partner

; Audio format is IMBE 88 bit

[P25]

Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)

TXPort = 34100                  ; Port to send AMBE TLV frames to (export)

RXPort = 34103                  ; Port to listen on (import)

Slot = 2                        ; Export slot

 

; Configure the Yaesu Fusion Partner

; Audio format is AMBE 72 bit

; Audio format is IMBE 88 bit

[YSF]

Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)

TXPort = 36103                  ; Port to send AMBE TLV frames to (export)

RXPort = 36100                  ; Port to listen on (import)

; FallbackID = 208011           ; In case we can not find a valid DMR id in the database, export this one

ExportTG = 133                  ; Which TG to export =>  TG133 in DMR

Slot = 2                        ; Export slot

 

 

 

File Configuration MMDVM_Bridge.ini

/opt/MMDVM_Bridge_FCS# more  MMDVM_Bridge_FCS.ini

[General]

Callsign=DVSFCS

Id=208XXXXXX

Timeout=240

Duplex=0

 

[Info]

RXFrequency=434500000

TXFrequency=434500000

Power=1

Latitude=41.7333

Longitude=-50.3999

Height=10

Location=FCS133 <=> DMR

Description=MMDVM_Bridge_FCS

URL=https://groups.io/g/DVSwitch

 

[Log]

# Logging levels, 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal

DisplayLevel=1

FileLevel=2

FilePath=/var/log

FileRoot=MMDVM_Bridge_FCS

 

[DMR Id Lookup]

File=/home/toto/ref/DMRIds.dat

Time=24

 

[NXDN Id Lookup]

File=/home/toto/ref/NXDN.csv

Time=24

 

[Modem]

Port=/dev/null

RSSIMappingFile=RSSI.dat

Trace=0

Debug=0

 

[D-Star]

Enable=0

Module=C

 

[DMR]

Enable=1

ColorCode=1

EmbeddedLCOnly=1

DumpTAData=0

 

[System Fusion]

Enable=1

 

[P25]

Enable=0

NAC=293

 

[NXDN]

Enable=0

RAN=1

Id=12345

 

[D-Star Network]

Enable=0

GatewayAddress=127.0.0.1

GatewayPort=20010

LocalPort=20011

Debug=0

 

[DMR Network]

Enable=1

Address=SRV-HBlink3 @IP

Port=54200

Jitter=360

# Local=62032

Password=tototititata

# for DMR+ see https://github.com/DVSwitch/MMDVM_Bridge/blob/master/DOC/DMRplus_startup_options.md

# for XLX the syntax is: Options=XLX:4009

# Options=

Slot1=0

Slot2=1

Debug=0

 

[System Fusion Network]

Enable=1

LocalAddress=0

LocalPort=3250

GatewayAddress=127.0.0.1

GatewayPort=4250

Debug=0

 

[P25 Network]

Enable=0

GatewayAddress=127.0.0.1

GatewayPort=42020

LocalPort=32010

Debug=0

 

[NXDN Network]

Enable=0

#LocalAddress=127.0.0.1

Debug=0

LocalPort=14021

GatewayAddress=127.0.0.1

GatewayPort=14020

 

 

 

File Configuration YSFGateway.ini

more YSFGateway_FCS.ini

[General]

Callsign=DVSFCS

Suffix=ND

Id=208XXXX

RptAddress=127.0.0.1

RptPort=3250

LocalAddress=127.0.0.1

LocalPort=4250

WiresXMakeUpper=1

WiresXCommandPassthrough=0

Daemon=0

 

[Info]

RXFrequency=434500000

TXFrequency=434500000

Power=1

Latitude=0.0

Longitude=0.0

Height=0

Name=Link FCS <=> DMR

Description=Link YSFGateway

 

[Log]

# Logging levels, 0=No logging

DisplayLevel=1

FileLevel=2

FilePath=/var/log

FileRoot=YSFGateway_FCS

 

[aprs.fi]

Enable=0

# Server=noam.aprs2.net

Server=euro.aprs2.net

Port=14580

Password=9999

Description=APRS Description

Suffix=Y

 

[Network]

Startup=FCS00133

InactivityTimeout=0

Revert=0

Debug=0

 

[YSF Network]

Enable=0

Port=42000

Hosts=/home/teambvc/ref/YSFHosts.txt

ReloadTime=60

ParrotAddress=127.0.0.1

ParrotPort=42012

YSF2DMRAddress=127.0.0.1

YSF2DMRPort=42013

YSF2NXDNAddress=127.0.0.1

YSF2NXDNPort=42014

YSF2P25Address=127.0.0.1

YSF2P25Port=42015

 

[FCS Network]

Enable=1

Rooms=/home/toto/ref/FCSRooms.txt

Port=42001

 

[Mobile GPS]

Enable=0

Address=127.0.0.1

Port=7834

 

 

73’s

F1PTL Bruno

 

Provenance : Courrier pour Windows 10

 

De : Doug - W4DBG
Envoyé le :samedi 7 mars 2020 00:49
À : main@dvswitch.groups.io
Objet :Re: [DVSwitch] Link DMR <==> FCSXXX

 

I have searched and searched.. Just seeing if there is an update or a certain configuration that is needed to do DMR <> FCS ?

 

Thanks,

 

Doug

W4DBG

 

 

 

On Fri, Dec 7, 2018 at 10:44 AM Bruno <ff1ptl@...> wrote:

Hi,

 

Super thank you very much for the developments. Congratulations for your work.

 

73's

 

F1PTL Bruno

 

Le ven. 7 déc. 2018 à 15:03, Steve N4IRS <szingman@...> a écrit :

We have identified a bug. It is being worked on now. I will post when you can update.

Steve N4IRS

On 12/4/2018 4:41 PM, Bruno wrote:

Starting logging, please wait...
M: 2018-12-04 21:39:55.381 YSF, network watchdog has expired, 152.4 seconds, 0% packet loss, BER: 0.0%

M: 2018-12-04 21:39:58.946 YSF, received network data from N4IRR to ALL at FCS001-33 

 



--

Doug Gooden
troytrojan@...

 




Avast logo

L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
www.avast.com



--
Hello everyone,
I want to set up a Link between HBLink and a room Wires-X from Yeasu in C4FM. Is there a possibility to set up the type of editing.
73 to all.
F1PTL Bruno



--
Doug Gooden
troytrojan@...


EchoLink to XLX and or DMR/DStar

Robert Moldenhauer
 

Hi,

How would I go about hooking an EchoLink conference (*HAM*) to an XLX reflector or a DStar or DMR reflector?

Thanks,
Robert


Re: I want to link DMR and WIRES-X with Allstarlink.

임성규
 

I solved
Thank you.


Re: I want to link DMR and WIRES-X with Allstarlink.

임성규
 

I solved
Thank you.


Re: I want to link DMR and WIRES-X with Allstarlink.

임성규
 

I solved
Thank you.


how to link hblink with Echolink

cn8vx.ma@...
 

Hi and thank you in advance for your help
I recently mounted an HBlink server that here is its link http://dnsrjyouness.ddns.net:8080/.
I would like to know how to link my HBlink server with Echolink from an OM who offers me there.
Knowing that I am not a LINUX expert but I manage if someone can help me step by step
Thank you and 73 from CN8VX


RE : Re: [DVSwitch] Link DMR <==> FCSXXX

Bruno
 

Hi Doug,

 

I used a connection  MMDVM_Bridge + YSFGateway FCSXXX

 

HBlink-Fr <===>MMDVM_Bridge <====> YSFGateway FCSxxxx

 

File configuration DVSwitch.ini

/opt/MMDVM_Bridge_FCS# more DVSwitch.ini

; MMDVM_Bridge export / import configuration file.

;   This file should be placed along side of MMDVM_Bridge or it can be

;   supplied as a path on the MMDVM_BRIDGE environment variable.

 

; Configure the Quantar Repeater Partner

; Note that the TX and RX ports are already reversed for MMDVM_Bridge <--> Quantar_Bridge

[QUANTAR]

logFilePath = /var/log/Quantar_Bridge.log

Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)

TXPort = 34103                  ; Port to send AMBE TLV frames to (export)

RXPort = 34100                  ; Port to listen on (import)

quantarPort = 1994              ; HDLC frames To/From the Quantar repeater

logLevel = 2                    ; Show messages and above 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal

debug = 0                       ; Debug 0 = off, 1 = on (adds lots of additional messages)

 

; Configure the DMR Partner

; Audio format is AMBE 72 bit

[DMR]

Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)

TXPort = 36100                  ; Port to send AMBE TLV frames to (export)

RXPort = 36103                  ; Port to listen on (import)

Slot = 2                        ; Export slot

 

; Configure the D-Star Partner

; Audio format is AMBE 48 bit (DSAMBE)

[DSTAR]

Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)

TXPort = 32100                  ; Port to send AMBE TLV frames to (export)

RXPort = 32103                  ; Port to listen on (import)

FallbackID = 1234567            ; In case we can not find a valid DMR id in the database, export this one

ExportTG = 9                    ; Which TG to export

Slot = 2                        ; Export slot

 

; Configure the NXDN Partner

; Audio format is AMBE 72 bit

[NXDN]

Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)

TXPort = 33100                  ; Port to send AMBE TLV frames to (export)

RXPort = 33103                  ; Port to listen on (import)

FallbackID = 1234567            ; In case we can not find a valid DMR id in the database, export this one

NXDNFallbackID  = 12345         ; Use this ID when the input DMR ID is not found in the database

Translate = 1234=4321           ; Translate NXDN TG < -- > DMR TG (bidirectional)

Slot = 2                        ; Export slot

 

; Configure the P25 Partner

; Audio format is IMBE 88 bit

[P25]

Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)

TXPort = 34100                  ; Port to send AMBE TLV frames to (export)

RXPort = 34103                  ; Port to listen on (import)

Slot = 2                        ; Export slot

 

; Configure the Yaesu Fusion Partner

; Audio format is AMBE 72 bit

; Audio format is IMBE 88 bit

[YSF]

Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)

TXPort = 36103                  ; Port to send AMBE TLV frames to (export)

RXPort = 36100                  ; Port to listen on (import)

; FallbackID = 208011           ; In case we can not find a valid DMR id in the database, export this one

ExportTG = 133                  ; Which TG to export =>  TG133 in DMR

Slot = 2                        ; Export slot

 

 

 

File Configuration MMDVM_Bridge.ini

/opt/MMDVM_Bridge_FCS# more  MMDVM_Bridge_FCS.ini

[General]

Callsign=DVSFCS

Id=208XXXXXX

Timeout=240

Duplex=0

 

[Info]

RXFrequency=434500000

TXFrequency=434500000

Power=1

Latitude=41.7333

Longitude=-50.3999

Height=10

Location=FCS133 <=> DMR

Description=MMDVM_Bridge_FCS

URL=https://groups.io/g/DVSwitch

 

[Log]

# Logging levels, 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal

DisplayLevel=1

FileLevel=2

FilePath=/var/log

FileRoot=MMDVM_Bridge_FCS

 

[DMR Id Lookup]

File=/home/toto/ref/DMRIds.dat

Time=24

 

[NXDN Id Lookup]

File=/home/toto/ref/NXDN.csv

Time=24

 

[Modem]

Port=/dev/null

RSSIMappingFile=RSSI.dat

Trace=0

Debug=0

 

[D-Star]

Enable=0

Module=C

 

[DMR]

Enable=1

ColorCode=1

EmbeddedLCOnly=1

DumpTAData=0

 

[System Fusion]

Enable=1

 

[P25]

Enable=0

NAC=293

 

[NXDN]

Enable=0

RAN=1

Id=12345

 

[D-Star Network]

Enable=0

GatewayAddress=127.0.0.1

GatewayPort=20010

LocalPort=20011

Debug=0

 

[DMR Network]

Enable=1

Address=SRV-HBlink3 @IP

Port=54200

Jitter=360

# Local=62032

Password=tototititata

# for DMR+ see https://github.com/DVSwitch/MMDVM_Bridge/blob/master/DOC/DMRplus_startup_options.md

# for XLX the syntax is: Options=XLX:4009

# Options=

Slot1=0

Slot2=1

Debug=0

 

[System Fusion Network]

Enable=1

LocalAddress=0

LocalPort=3250

GatewayAddress=127.0.0.1

GatewayPort=4250

Debug=0

 

[P25 Network]

Enable=0

GatewayAddress=127.0.0.1

GatewayPort=42020

LocalPort=32010

Debug=0

 

[NXDN Network]

Enable=0

#LocalAddress=127.0.0.1

Debug=0

LocalPort=14021

GatewayAddress=127.0.0.1

GatewayPort=14020

 

 

 

File Configuration YSFGateway.ini

more YSFGateway_FCS.ini

[General]

Callsign=DVSFCS

Suffix=ND

Id=208XXXX

RptAddress=127.0.0.1

RptPort=3250

LocalAddress=127.0.0.1

LocalPort=4250

WiresXMakeUpper=1

WiresXCommandPassthrough=0

Daemon=0

 

[Info]

RXFrequency=434500000

TXFrequency=434500000

Power=1

Latitude=0.0

Longitude=0.0

Height=0

Name=Link FCS <=> DMR

Description=Link YSFGateway

 

[Log]

# Logging levels, 0=No logging

DisplayLevel=1

FileLevel=2

FilePath=/var/log

FileRoot=YSFGateway_FCS

 

[aprs.fi]

Enable=0

# Server=noam.aprs2.net

Server=euro.aprs2.net

Port=14580

Password=9999

Description=APRS Description

Suffix=Y

 

[Network]

Startup=FCS00133

InactivityTimeout=0

Revert=0

Debug=0

 

[YSF Network]

Enable=0

Port=42000

Hosts=/home/teambvc/ref/YSFHosts.txt

ReloadTime=60

ParrotAddress=127.0.0.1

ParrotPort=42012

YSF2DMRAddress=127.0.0.1

YSF2DMRPort=42013

YSF2NXDNAddress=127.0.0.1

YSF2NXDNPort=42014

YSF2P25Address=127.0.0.1

YSF2P25Port=42015

 

[FCS Network]

Enable=1

Rooms=/home/toto/ref/FCSRooms.txt

Port=42001

 

[Mobile GPS]

Enable=0

Address=127.0.0.1

Port=7834

 

 

73’s

F1PTL Bruno

 

Provenance : Courrier pour Windows 10

 

De : Doug - W4DBG
Envoyé le :samedi 7 mars 2020 00:49
À : main@dvswitch.groups.io
Objet :Re: [DVSwitch] Link DMR <==> FCSXXX

 

I have searched and searched.. Just seeing if there is an update or a certain configuration that is needed to do DMR <> FCS ?

 

Thanks,

 

Doug

W4DBG

 

 

 

On Fri, Dec 7, 2018 at 10:44 AM Bruno <ff1ptl@...> wrote:

Hi,

 

Super thank you very much for the developments. Congratulations for your work.

 

73's

 

F1PTL Bruno

 

Le ven. 7 déc. 2018 à 15:03, Steve N4IRS <szingman@...> a écrit :

We have identified a bug. It is being worked on now. I will post when you can update.

Steve N4IRS

On 12/4/2018 4:41 PM, Bruno wrote:

Starting logging, please wait...
M: 2018-12-04 21:39:55.381 YSF, network watchdog has expired, 152.4 seconds, 0% packet loss, BER: 0.0%

M: 2018-12-04 21:39:58.946 YSF, received network data from N4IRR to ALL at FCS001-33 

 



--

Doug Gooden
troytrojan@...

 




Avast logo

L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
www.avast.com



--
Hello everyone,
I want to set up a Link between HBLink and a room Wires-X from Yeasu in C4FM. Is there a possibility to set up the type of editing.
73 to all.
F1PTL Bruno


Re: Link DMR <==> FCSXXX

Doug - W4DBG
 

I have searched and searched.. Just seeing if there is an update or a certain configuration that is needed to do DMR <> FCS ?

Thanks,

Doug
W4DBG



On Fri, Dec 7, 2018 at 10:44 AM Bruno <ff1ptl@...> wrote:
Hi,

Super thank you very much for the developments. Congratulations for your work.

73's

F1PTL Bruno

Le ven. 7 déc. 2018 à 15:03, Steve N4IRS <szingman@...> a écrit :
We have identified a bug. It is being worked on now. I will post when you can update.

Steve N4IRS

On 12/4/2018 4:41 PM, Bruno wrote:
Starting logging, please wait...
M: 2018-12-04 21:39:55.381 YSF, network watchdog has expired, 152.4 seconds, 0% packet loss, BER: 0.0%
M: 2018-12-04 21:39:58.946 YSF, received network data from N4IRR to ALL at FCS001-33 



--
Doug Gooden
troytrojan@...


Re: I want to link DMR and WIRES-X with Allstarlink.

Skyler Fennell
 

I haven’t messed much with system confusion wires X

If you run the wiresX box in analog, can you connect to digital nodes? Or just analog nodes? Is there an AMBE chip in those HRI200 boxes to cross-over a to d, is that what makes them so expensive? 

Skyler 

On Fri, Mar 6, 2020 at 2:47 PM Mike, AA9VI via Groups.Io <mjswiatk=yahoo.com@groups.io> wrote:
See the first two pages.  Hope this helps.

Mike, AA9VI


Re: Documentation

Tom Corcoran
 

enabled various networks in DMRGateway.ini … but DVSwitch still stays in BM. Will check out Pi-Star to see if there are any clues.
--
Tom VE3NY


Re: I want to link DMR and WIRES-X with Allstarlink.

Mike, AA9VI
 

See the first two pages.  Hope this helps.

Mike, AA9VI


Re: I want to link DMR and WIRES-X with Allstarlink.

Mike, AA9VI
 

Patrick,
It is totally possible and I have it working on allstarlink node 46625, wires-X 40911.  I connected the URI-x interface to the wires-X box. You do need a pull up on one of the lines and the Wires-X has to be set for analog mode.  I forget which line has to be pulled high.  I'll have to look at my documentation and send it along when I get a chance.

Mike, AA9VI


Re: I want to link DMR and WIRES-X with Allstarlink.

ve6gcd@...
 

It is possible to link AllStarLink to a Wires-X round room, not very straightforward though. It all depends on the interface you are using. For example, an ASL sound fob may not be able to transmit to Wires-X due to signaling incompatibility between the ASL fob's PTT and the HRI-200's COS pin. Take note that at least 3.5V is needed to key up the HRI-200 COS pin.


Re: I want to link DMR and WIRES-X with Allstarlink.

Patrick Perdue
 

AFAIK, if you want to link Wires-X to anything, you need an RF link between YSF and Wires-X using a hotspot and a radio connected to the HRI-200 for hosting a Wires-X room. You can't connect an HRI-200 directly to ASL.


On 3/5/2020 5:53 PM, hopeseoul@... wrote:

I want to link DMR and WIRES-X with Allstarlink.
WIRES-X uses an ARiUSB interface.
I modified the Allstarlink setup file but it shouldn't.
Please help me.
Thank you.

 


I want to link DMR and WIRES-X with Allstarlink.

hopeseoul@...
 

I want to link DMR and WIRES-X with Allstarlink.
WIRES-X uses an ARiUSB interface.
I modified the Allstarlink setup file but it shouldn't.
Please help me.
Thank you.

 


Re: Overdriven P25 audio

Heiko DL1BZ
 

I'm running "in production" a DMR<>P25 bridge long time. Beware, there are two ways (DMR>P25 and P25>DMR) you need to adjust.:
Here my settings:
analog_bridge DMR:
usrpAudio = AUDIO_USE_GAIN               ; Audio to ASL (AUDIO_UNITY, AUDIO_USE_AGC, AUDIO_USE_GAIN)
usrpGain = 1.0                           ; Gain (in db) of the AGC filter
tlvAudio = AUDIO_USE_GAIN               ; Audio from ASL (AUDIO_UNITY, AUDIO_USE_GAIN, AUDIO_BPF)
tlvGain = 0.6                           ; Gain factor of audio from ASL (0.0-1.0)

analog_bridge P25:
usrpAudio = AUDIO_USE_GAIN               ; Audio to ASL (AUDIO_UNITY, AUDIO_USE_AGC, AUDIO_USE_GAIN)
usrpGain = 1.0                           ; Gain (in db) of the AGC filter
tlvAudio = AUDIO_USE_GAIN               ; Audio from ASL (AUDIO_UNITY, AUDIO_USE_GAIN, AUDIO_BPF)
tlvGain = 1.0                           ; Gain factor of audio from ASL (0.0-1.0)

WIth this setup all is ok, the audio level are good and acceptable.

73 Heiko, DL1BZ


Re: Overdriven P25 audio

Steve N4IRS
 

No change. Remember there are 2 level settings:

usrpAudio = AUDIO_UNITY                 ; Audio to ASL (AUDIO_UNITY, AUDIO_USE_AGC, AUDIO_USE_GAIN)
usrpGain = 1.10                         ; Gain (in db) of the AGC filter
tlvAudio = AUDIO_UNITY                  ; Audio from ASL (AUDIO_UNITY, AUDIO_USE_GAIN, AUDIO_BPF)
tlvGain = 0.35                          ; Gain factor of audio from ASL (0.0-1.0)

On 3/5/2020 11:04 AM, Kevin N9OIG wrote:
Was there a change from the default? Mine from default is .35 on both Analog_Bridge_DME.ini and P25.


Re: Overdriven P25 audio

Kevin N9OIG
 

Was there a change from the default? Mine from default is .35 on both Analog_Bridge_DME.ini and P25.


Re: Documentation

Steve N4IRS
 

I don't see why not. I have not used DMRGateway.

On 3/5/2020 8:50 AM, Tom Corcoran wrote:
Steve,

I'm familiar with use of DMRGateway from pistar experience. If I enable networks In DMRGateway.ini, can I access them using same protocol (ex. 84639 for DMRplus reflector 4639)? More to be done in DVSwitch?
--
Tom VE3NY


Re: Documentation

Tom Corcoran
 

Steve,

I'm familiar with use of DMRGateway from pistar experience. If I enable networks In DMRGateway.ini, can I access them using same protocol (ex. 84639 for DMRplus reflector 4639)? More to be done in DVSwitch?
--
Tom VE3NY

3941 - 3960 of 9882