Date   

Re: NXDN not passing thru to Dstar

Steve N4IRS
 

Do you have anything else bridged to D-Star? If so, does it pass traffic?

Steve N4IRS

On 3/22/20 7:06 PM, Kevin Halton wrote:
I have had my bridge up and running for a few years now with little to no issues. Recently (yesterday) I happened to notice that nxdn is not passing traffic to dstar. It is passing dstar to nxdn with no issues. Nxdn does pass thru Asl,dmr,fusion, and P25 with no issues. I have not made any changes and have tried rebooting the ambe server, XLX server, and the ASL bridge with no results. NXDN is linked thru BM I can see it up on the BM master page.

Any thoughts?


NXDN not passing thru to Dstar

Kevin Halton
 

I have had my bridge up and running for a few years now with little to no issues. Recently (yesterday) I happened to notice that nxdn is not passing traffic to dstar. It is passing dstar to nxdn with no issues. Nxdn does pass thru Asl,dmr,fusion, and P25 with no issues. I have not made any changes and have tried rebooting the ambe server, XLX server, and the ASL bridge with no results. NXDN is linked thru BM I can see it up on the BM master page.

Any thoughts?


Re: XLX to MMDVM

Patrick Perdue
 

The second endpoint is a master server, yes, in this case, TGIF.

I didn't think there was a way only using two instances of MMDVM_Bridge to direct traffic, just wanted to make sure I wasn't missing anything obvious.

On 3/22/2020 10:56 AM, Steve N4IRS wrote:
MB would not give you the ability to "direct traffic" The second question is what is the endpoint connected to MB. MB can only connect to a Master (or server) I think you are goint to want to run HBlink3.

Steve N4IRS

On 3/22/20 10:31 AM, Patrick Perdue wrote:
Hi:

I wish to create a bridge between XLX and MMDVM, DMR all the way through, not Brandmeister.

Can this be done with two instances of MMDVM_Bridge with inverted ports? If so, I don't see how to direct traffic to a specific talkgroup, as Analog_Bridge, I assume, wouldn't be a part of the picture, as there is no need for transcoding. If not, would HBlink be a better fit?

Thanks and 73

de

KE4DYI





Re: XLX to MMDVM

Patrick Perdue
 

I thought DMRGateway was dead... Sounds like what I need. As I understand it, HBlink3 uses quite a lot of memory, and my resources are limited, so would rather not use it for such a simple bridge if I can help it.


On 3/22/2020 10:58 AM, Ernie Gm7kbk wrote:
You do not need Analog_ Bridge. Just 2 Instances of MMDVM_Bridge. Swap the ports over in DVSWitch.ini

Also Change local port in MMDVM_Bridge they cannot be the same.
If you want to connect from Slot 1 to Slot 2 XLX you will need Dmrgateway.

I am using this to connect my Dmr + Tg on Slot 1 to connect to my Xlx Server.
Works very well.


Re: XLX to MMDVM

 

You do not need Analog_ Bridge. Just 2 Instances of MMDVM_Bridge. Swap the ports over in DVSWitch.ini

Also Change local port in MMDVM_Bridge they cannot be the same.
If you want to connect from Slot 1 to Slot 2 XLX you will need Dmrgateway.

I am using this to connect my Dmr + Tg on Slot 1 to connect to my Xlx Server.
Works very well.


Re: XLX to MMDVM

Steve N4IRS
 

MB would not give you the ability to "direct traffic" The second question is what is the endpoint connected to MB. MB can only connect to a Master (or server) I think you are goint to want to run HBlink3.

Steve N4IRS

On 3/22/20 10:31 AM, Patrick Perdue wrote:
Hi:

I wish to create a bridge between XLX and MMDVM, DMR all the way through, not Brandmeister.

Can this be done with two instances of MMDVM_Bridge with inverted ports? If so, I don't see how to direct traffic to a specific talkgroup, as Analog_Bridge, I assume, wouldn't be a part of the picture, as there is no need for transcoding. If not, would HBlink be a better fit?

Thanks and 73

de

KE4DYI



XLX to MMDVM

Patrick Perdue
 

Hi:

I wish to create a bridge between XLX and MMDVM, DMR all the way through, not Brandmeister.

Can this be done with two instances of MMDVM_Bridge with inverted ports? If so, I don't see how to direct traffic to a specific talkgroup, as Analog_Bridge, I assume, wouldn't be a part of the picture, as there is no need for transcoding. If not, would HBlink be a better fit?

Thanks and 73

de

KE4DYI


Working with MMDVM_Bridge and XLX

JJ Cummings
 

The problem that I am seeing does not exist between MMDVM_Bridge and XLX but between ircddbgateway and xlx.  The design is simple:

Analog_Bridge <-> MMDVM_Bridge <-> ircddbgateway <-> XLX (DStar)

The connection between ircddbgateway and XLX consistently times out (this occurs from pistar as well).  This appears to be an issue where ircddbgateway is not handling the keepalive packets correctly from the XLX server, as evidenced by the ircddb logs below.  I have tried DCS and DExtra and both exhibit the exact same behavior.  Any input is greatly appreciated!

ircddb logs:
M: 2020-03-19 23:18:49: DCS link to DCS815 established
M: 2020-03-19 23:18:50: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:18:51: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:18:52: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:18:53: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:18:54: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:18:55: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:18:56: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:18:57: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:18:58: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:18:59: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:19:01: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:19:02: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:19:03: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:19:04: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:19:05: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:19:06: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:19:07: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:19:08: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:19:09: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:19:10: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:19:11: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:19:12: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:19:13: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:19:14: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:19:15: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:19:16: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:19:17: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:19:18: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:19:19: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:19:20: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:19:51: DCS link to DCS815 has failed (poll inactivity)
M: 2020-03-19 23:19:51: DCS link to DCS815 has failed, relinking


Re: hotspot security

David Uzzell
 

Whilst it works it’s great but for some and unknown reasons it at times just stops working and the only way to get a connection is to remove it from both your hotspot and BM. Well this is the case on PiStar. 

On 18 Mar 2020, 02:28 +1100, Tito Lopez <OBUSTOS01@...>, wrote:
If u use pistar, I believe u have log into BM and edit your profile sec settings there. The same passwd you set there u put..... darn it Steve stole my thunder.  Lol


On Tue, Mar 17, 2020, 8:09 AM Russell, KV4S <russelljthomas@...> wrote:
can mmdvm work when hotspot security is on and if so, how do you configure it?


Re: hotspot security

 

easy enough, thanks!! never used it before :)


On Tue, Mar 17, 2020 at 10:27 AM Steve N4IRS <szingman@...> wrote:
Turn on hotspot security in SelfCare
Set HotSpot Security in Selfcare
Match password in MB.ini


On 3/17/2020 11:08 AM, Russell, KV4S wrote:
can mmdvm work when hotspot security is on and if so, how do you configure it?


Re: hotspot security

Tito Lopez
 

If u use pistar, I believe u have log into BM and edit your profile sec settings there. The same passwd you set there u put..... darn it Steve stole my thunder.  Lol


On Tue, Mar 17, 2020, 8:09 AM Russell, KV4S <russelljthomas@...> wrote:
can mmdvm work when hotspot security is on and if so, how do you configure it?


Re: hotspot security

Steve N4IRS
 

Turn on hotspot security in SelfCare
Set HotSpot Security in Selfcare
Match password in MB.ini


On 3/17/2020 11:08 AM, Russell, KV4S wrote:
can mmdvm work when hotspot security is on and if so, how do you configure it?


hotspot security

 

can mmdvm work when hotspot security is on and if so, how do you configure it?


D-Star vocoder emulator

Steve, KB9MWR
 

There is a need for a D-Star vocoder emulator by the ham community for those who host cloud based bridges for digital voice modes.

If your a ham with this talent or know of one, the community would appreciate your efforts,

It should work similarly to the md380-emu tool by Travis (KK4VCZ) that folks have been using for DMR and the other modes.
https://github.com/travisgoodspeed/md380tools/wiki/MD380-Emulator#ambe-decoding


Connect HBLink to mumble

Kim-Benjamin Lütkemeier
 

Hello guys,
now I play with my thumbDV and connect with BlueDV du my Test HBlink Server, it works very well.

Now my Idea is connect Mumble with help from the ThumbDV to HBlink.
I try it with virtual Audio cable in Mumble. when BlueDV is running and some voice receive from hblink then mumble send (Voice active) but BlueDV has not the function voice activation, maybe someone has another idea best solution was with simulate "pressKey"

73,
Do1KBL, Kim


DVSwitch with MMDVM Dashboard

Tom Corcoran
 

All,

Anyone had any experience installing the MMDVM Dashboard? I've used it with my Pi-Star installs but can't seem to get LH listing when used with DVSwitch. I am able to display current transmitting station info but no LH list.
--
Tom VE3NY


EchoLink to XLX

Robert Moldenhauer
 

Hi,

I want to bridge an EchoLink conference to an XLX reflector. Could someone give me some help? 

Robert

VK2DY


digital links #brandmeister

JR Riner
 

I see quite a few digi links out there that have dmr, nxdn, fusion, echolink all connected together to one talkgroup. I am interested in this & read numerous threads here, but could someone point me in the right direction on how this is done.  73, KE4PMP


Re: RE : Re: [DVSwitch] Link DMR <==> FCSXXX

Doug - W4DBG
 

Bruno,

Thank You.. While I didn't really have anything wrong in my configuration, looking at your setup had me look through things and found that YSFGateway had somehow disappeared.. Not sure how that happened but I got it going and again thanks!

Doug
W4DBG


On Fri, Mar 6, 2020 at 7:51 PM Bruno <ff1ptl@...> wrote:

Hi Doug,

 

I used a connection  MMDVM_Bridge + YSFGateway FCSXXX

 

HBlink-Fr <===>MMDVM_Bridge <====> YSFGateway FCSxxxx

 

File configuration DVSwitch.ini

/opt/MMDVM_Bridge_FCS# more DVSwitch.ini

; MMDVM_Bridge export / import configuration file.

;   This file should be placed along side of MMDVM_Bridge or it can be

;   supplied as a path on the MMDVM_BRIDGE environment variable.

 

; Configure the Quantar Repeater Partner

; Note that the TX and RX ports are already reversed for MMDVM_Bridge <--> Quantar_Bridge

[QUANTAR]

logFilePath = /var/log/Quantar_Bridge.log

Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)

TXPort = 34103                  ; Port to send AMBE TLV frames to (export)

RXPort = 34100                  ; Port to listen on (import)

quantarPort = 1994              ; HDLC frames To/From the Quantar repeater

logLevel = 2                    ; Show messages and above 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal

debug = 0                       ; Debug 0 = off, 1 = on (adds lots of additional messages)

 

; Configure the DMR Partner

; Audio format is AMBE 72 bit

[DMR]

Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)

TXPort = 36100                  ; Port to send AMBE TLV frames to (export)

RXPort = 36103                  ; Port to listen on (import)

Slot = 2                        ; Export slot

 

; Configure the D-Star Partner

; Audio format is AMBE 48 bit (DSAMBE)

[DSTAR]

Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)

TXPort = 32100                  ; Port to send AMBE TLV frames to (export)

RXPort = 32103                  ; Port to listen on (import)

FallbackID = 1234567            ; In case we can not find a valid DMR id in the database, export this one

ExportTG = 9                    ; Which TG to export

Slot = 2                        ; Export slot

 

; Configure the NXDN Partner

; Audio format is AMBE 72 bit

[NXDN]

Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)

TXPort = 33100                  ; Port to send AMBE TLV frames to (export)

RXPort = 33103                  ; Port to listen on (import)

FallbackID = 1234567            ; In case we can not find a valid DMR id in the database, export this one

NXDNFallbackID  = 12345         ; Use this ID when the input DMR ID is not found in the database

Translate = 1234=4321           ; Translate NXDN TG < -- > DMR TG (bidirectional)

Slot = 2                        ; Export slot

 

; Configure the P25 Partner

; Audio format is IMBE 88 bit

[P25]

Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)

TXPort = 34100                  ; Port to send AMBE TLV frames to (export)

RXPort = 34103                  ; Port to listen on (import)

Slot = 2                        ; Export slot

 

; Configure the Yaesu Fusion Partner

; Audio format is AMBE 72 bit

; Audio format is IMBE 88 bit

[YSF]

Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)

TXPort = 36103                  ; Port to send AMBE TLV frames to (export)

RXPort = 36100                  ; Port to listen on (import)

; FallbackID = 208011           ; In case we can not find a valid DMR id in the database, export this one

ExportTG = 133                  ; Which TG to export =>  TG133 in DMR

Slot = 2                        ; Export slot

 

 

 

File Configuration MMDVM_Bridge.ini

/opt/MMDVM_Bridge_FCS# more  MMDVM_Bridge_FCS.ini

[General]

Callsign=DVSFCS

Id=208XXXXXX

Timeout=240

Duplex=0

 

[Info]

RXFrequency=434500000

TXFrequency=434500000

Power=1

Latitude=41.7333

Longitude=-50.3999

Height=10

Location=FCS133 <=> DMR

Description=MMDVM_Bridge_FCS

URL=https://groups.io/g/DVSwitch

 

[Log]

# Logging levels, 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal

DisplayLevel=1

FileLevel=2

FilePath=/var/log

FileRoot=MMDVM_Bridge_FCS

 

[DMR Id Lookup]

File=/home/toto/ref/DMRIds.dat

Time=24

 

[NXDN Id Lookup]

File=/home/toto/ref/NXDN.csv

Time=24

 

[Modem]

Port=/dev/null

RSSIMappingFile=RSSI.dat

Trace=0

Debug=0

 

[D-Star]

Enable=0

Module=C

 

[DMR]

Enable=1

ColorCode=1

EmbeddedLCOnly=1

DumpTAData=0

 

[System Fusion]

Enable=1

 

[P25]

Enable=0

NAC=293

 

[NXDN]

Enable=0

RAN=1

Id=12345

 

[D-Star Network]

Enable=0

GatewayAddress=127.0.0.1

GatewayPort=20010

LocalPort=20011

Debug=0

 

[DMR Network]

Enable=1

Address=SRV-HBlink3 @IP

Port=54200

Jitter=360

# Local=62032

Password=tototititata

# for DMR+ see https://github.com/DVSwitch/MMDVM_Bridge/blob/master/DOC/DMRplus_startup_options.md

# for XLX the syntax is: Options=XLX:4009

# Options=

Slot1=0

Slot2=1

Debug=0

 

[System Fusion Network]

Enable=1

LocalAddress=0

LocalPort=3250

GatewayAddress=127.0.0.1

GatewayPort=4250

Debug=0

 

[P25 Network]

Enable=0

GatewayAddress=127.0.0.1

GatewayPort=42020

LocalPort=32010

Debug=0

 

[NXDN Network]

Enable=0

#LocalAddress=127.0.0.1

Debug=0

LocalPort=14021

GatewayAddress=127.0.0.1

GatewayPort=14020

 

 

 

File Configuration YSFGateway.ini

more YSFGateway_FCS.ini

[General]

Callsign=DVSFCS

Suffix=ND

Id=208XXXX

RptAddress=127.0.0.1

RptPort=3250

LocalAddress=127.0.0.1

LocalPort=4250

WiresXMakeUpper=1

WiresXCommandPassthrough=0

Daemon=0

 

[Info]

RXFrequency=434500000

TXFrequency=434500000

Power=1

Latitude=0.0

Longitude=0.0

Height=0

Name=Link FCS <=> DMR

Description=Link YSFGateway

 

[Log]

# Logging levels, 0=No logging

DisplayLevel=1

FileLevel=2

FilePath=/var/log

FileRoot=YSFGateway_FCS

 

[aprs.fi]

Enable=0

# Server=noam.aprs2.net

Server=euro.aprs2.net

Port=14580

Password=9999

Description=APRS Description

Suffix=Y

 

[Network]

Startup=FCS00133

InactivityTimeout=0

Revert=0

Debug=0

 

[YSF Network]

Enable=0

Port=42000

Hosts=/home/teambvc/ref/YSFHosts.txt

ReloadTime=60

ParrotAddress=127.0.0.1

ParrotPort=42012

YSF2DMRAddress=127.0.0.1

YSF2DMRPort=42013

YSF2NXDNAddress=127.0.0.1

YSF2NXDNPort=42014

YSF2P25Address=127.0.0.1

YSF2P25Port=42015

 

[FCS Network]

Enable=1

Rooms=/home/toto/ref/FCSRooms.txt

Port=42001

 

[Mobile GPS]

Enable=0

Address=127.0.0.1

Port=7834

 

 

73’s

F1PTL Bruno

 

Provenance : Courrier pour Windows 10

 

De : Doug - W4DBG
Envoyé le :samedi 7 mars 2020 00:49
À : main@dvswitch.groups.io
Objet :Re: [DVSwitch] Link DMR <==> FCSXXX

 

I have searched and searched.. Just seeing if there is an update or a certain configuration that is needed to do DMR <> FCS ?

 

Thanks,

 

Doug

W4DBG

 

 

 

On Fri, Dec 7, 2018 at 10:44 AM Bruno <ff1ptl@...> wrote:

Hi,

 

Super thank you very much for the developments. Congratulations for your work.

 

73's

 

F1PTL Bruno

 

Le ven. 7 déc. 2018 à 15:03, Steve N4IRS <szingman@...> a écrit :

We have identified a bug. It is being worked on now. I will post when you can update.

Steve N4IRS

On 12/4/2018 4:41 PM, Bruno wrote:

Starting logging, please wait...
M: 2018-12-04 21:39:55.381 YSF, network watchdog has expired, 152.4 seconds, 0% packet loss, BER: 0.0%

M: 2018-12-04 21:39:58.946 YSF, received network data from N4IRR to ALL at FCS001-33 

 



--

Doug Gooden
troytrojan@...

 




Avast logo

L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
www.avast.com



--
Hello everyone,
I want to set up a Link between HBLink and a room Wires-X from Yeasu in C4FM. Is there a possibility to set up the type of editing.
73 to all.
F1PTL Bruno



--
Doug Gooden
troytrojan@...


EchoLink to XLX and or DMR/DStar

Robert Moldenhauer
 

Hi,

How would I go about hooking an EchoLink conference (*HAM*) to an XLX reflector or a DStar or DMR reflector?

Thanks,
Robert

2741 - 2760 of 8708