Date   

Re: NXDN not passing thru to Dstar

Steve N4IRS
 

What modes bridge to D-Star?

Sent via smoke signal (AT&T)


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Kevin Halton <Khalton@...>
Sent: Sunday, March 22, 2020 8:09:17 PM
To: main@dvswitch.groups.io <main@dvswitch.groups.io>
Subject: Re: [DVSwitch] NXDN not passing thru to Dstar
 
Yes,

The system has asl-dmr-p25-dstar-Nxdn-ysf. Both nxdn and Dstar   Dstarflow thru all the modes including Nxdn. Nxdn flows thru all modes EXCEPT dstar. 

Hope this makes sense. 


On Mar 22, 2020, at 7:46 PM, Steve N4IRS <szingman@...> wrote:

 Do you have anything else bridged to D-Star? If so, does it pass traffic?

Steve N4IRS

On 3/22/20 7:06 PM, Kevin Halton wrote:
I have had my bridge up and running for a few years now with little to no issues. Recently (yesterday) I happened to notice that nxdn is not passing traffic to dstar. It is passing dstar to nxdn with no issues. Nxdn does pass thru Asl,dmr,fusion, and P25 with no issues. I have not made any changes and have tried rebooting the ambe server, XLX server, and the ASL bridge with no results. NXDN is linked thru BM I can see it up on the BM master page.

Any thoughts?


Re: NXDN not passing thru to Dstar

Kevin Halton
 

Yes,

The system has asl-dmr-p25-dstar-Nxdn-ysf. Both nxdn and Dstar   Dstarflow thru all the modes including Nxdn. Nxdn flows thru all modes EXCEPT dstar. 

Hope this makes sense. 


On Mar 22, 2020, at 7:46 PM, Steve N4IRS <szingman@...> wrote:

 Do you have anything else bridged to D-Star? If so, does it pass traffic?

Steve N4IRS

On 3/22/20 7:06 PM, Kevin Halton wrote:
I have had my bridge up and running for a few years now with little to no issues. Recently (yesterday) I happened to notice that nxdn is not passing traffic to dstar. It is passing dstar to nxdn with no issues. Nxdn does pass thru Asl,dmr,fusion, and P25 with no issues. I have not made any changes and have tried rebooting the ambe server, XLX server, and the ASL bridge with no results. NXDN is linked thru BM I can see it up on the BM master page.

Any thoughts?


Re: Tune audio levels in DStar gateway #analog_bridge

David
 

Dear Sir
I have some confuse,please help me .

If I want to tune P25 to DMR (dmr can hear voice louder ,so I need to set Audio_Unity in AB_P25
And use Audio_USE_Gain on AB_DMR modify dmrgain of AB_DMR ?

Thanks 


Re: NXDN not passing thru to Dstar

Steve N4IRS
 

Do you have anything else bridged to D-Star? If so, does it pass traffic?

Steve N4IRS

On 3/22/20 7:06 PM, Kevin Halton wrote:
I have had my bridge up and running for a few years now with little to no issues. Recently (yesterday) I happened to notice that nxdn is not passing traffic to dstar. It is passing dstar to nxdn with no issues. Nxdn does pass thru Asl,dmr,fusion, and P25 with no issues. I have not made any changes and have tried rebooting the ambe server, XLX server, and the ASL bridge with no results. NXDN is linked thru BM I can see it up on the BM master page.

Any thoughts?


NXDN not passing thru to Dstar

Kevin Halton
 

I have had my bridge up and running for a few years now with little to no issues. Recently (yesterday) I happened to notice that nxdn is not passing traffic to dstar. It is passing dstar to nxdn with no issues. Nxdn does pass thru Asl,dmr,fusion, and P25 with no issues. I have not made any changes and have tried rebooting the ambe server, XLX server, and the ASL bridge with no results. NXDN is linked thru BM I can see it up on the BM master page.

Any thoughts?


Re: XLX to MMDVM

Patrick Perdue
 

The second endpoint is a master server, yes, in this case, TGIF.

I didn't think there was a way only using two instances of MMDVM_Bridge to direct traffic, just wanted to make sure I wasn't missing anything obvious.

On 3/22/2020 10:56 AM, Steve N4IRS wrote:
MB would not give you the ability to "direct traffic" The second question is what is the endpoint connected to MB. MB can only connect to a Master (or server) I think you are goint to want to run HBlink3.

Steve N4IRS

On 3/22/20 10:31 AM, Patrick Perdue wrote:
Hi:

I wish to create a bridge between XLX and MMDVM, DMR all the way through, not Brandmeister.

Can this be done with two instances of MMDVM_Bridge with inverted ports? If so, I don't see how to direct traffic to a specific talkgroup, as Analog_Bridge, I assume, wouldn't be a part of the picture, as there is no need for transcoding. If not, would HBlink be a better fit?

Thanks and 73

de

KE4DYI





Re: XLX to MMDVM

Patrick Perdue
 

I thought DMRGateway was dead... Sounds like what I need. As I understand it, HBlink3 uses quite a lot of memory, and my resources are limited, so would rather not use it for such a simple bridge if I can help it.


On 3/22/2020 10:58 AM, Ernie Gm7kbk wrote:
You do not need Analog_ Bridge. Just 2 Instances of MMDVM_Bridge. Swap the ports over in DVSWitch.ini

Also Change local port in MMDVM_Bridge they cannot be the same.
If you want to connect from Slot 1 to Slot 2 XLX you will need Dmrgateway.

I am using this to connect my Dmr + Tg on Slot 1 to connect to my Xlx Server.
Works very well.


Re: XLX to MMDVM

 

You do not need Analog_ Bridge. Just 2 Instances of MMDVM_Bridge. Swap the ports over in DVSWitch.ini

Also Change local port in MMDVM_Bridge they cannot be the same.
If you want to connect from Slot 1 to Slot 2 XLX you will need Dmrgateway.

I am using this to connect my Dmr + Tg on Slot 1 to connect to my Xlx Server.
Works very well.


Re: XLX to MMDVM

Steve N4IRS
 

MB would not give you the ability to "direct traffic" The second question is what is the endpoint connected to MB. MB can only connect to a Master (or server) I think you are goint to want to run HBlink3.

Steve N4IRS

On 3/22/20 10:31 AM, Patrick Perdue wrote:
Hi:

I wish to create a bridge between XLX and MMDVM, DMR all the way through, not Brandmeister.

Can this be done with two instances of MMDVM_Bridge with inverted ports? If so, I don't see how to direct traffic to a specific talkgroup, as Analog_Bridge, I assume, wouldn't be a part of the picture, as there is no need for transcoding. If not, would HBlink be a better fit?

Thanks and 73

de

KE4DYI



XLX to MMDVM

Patrick Perdue
 

Hi:

I wish to create a bridge between XLX and MMDVM, DMR all the way through, not Brandmeister.

Can this be done with two instances of MMDVM_Bridge with inverted ports? If so, I don't see how to direct traffic to a specific talkgroup, as Analog_Bridge, I assume, wouldn't be a part of the picture, as there is no need for transcoding. If not, would HBlink be a better fit?

Thanks and 73

de

KE4DYI


Working with MMDVM_Bridge and XLX

JJ Cummings
 

The problem that I am seeing does not exist between MMDVM_Bridge and XLX but between ircddbgateway and xlx.  The design is simple:

Analog_Bridge <-> MMDVM_Bridge <-> ircddbgateway <-> XLX (DStar)

The connection between ircddbgateway and XLX consistently times out (this occurs from pistar as well).  This appears to be an issue where ircddbgateway is not handling the keepalive packets correctly from the XLX server, as evidenced by the ircddb logs below.  I have tried DCS and DExtra and both exhibit the exact same behavior.  Any input is greatly appreciated!

ircddb logs:
M: 2020-03-19 23:18:49: DCS link to DCS815 established
M: 2020-03-19 23:18:50: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:18:51: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:18:52: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:18:53: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:18:54: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:18:55: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:18:56: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:18:57: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:18:58: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:18:59: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:19:01: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:19:02: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:19:03: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:19:04: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:19:05: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:19:06: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:19:07: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:19:08: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:19:09: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:19:10: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:19:11: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:19:12: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:19:13: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:19:14: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:19:15: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:19:16: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:19:17: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:19:18: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:19:19: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:19:20: Unknown incoming DCS poll from DCS815 I
M: 2020-03-19 23:19:51: DCS link to DCS815 has failed (poll inactivity)
M: 2020-03-19 23:19:51: DCS link to DCS815 has failed, relinking


Re: hotspot security

David Uzzell
 

Whilst it works it’s great but for some and unknown reasons it at times just stops working and the only way to get a connection is to remove it from both your hotspot and BM. Well this is the case on PiStar. 

On 18 Mar 2020, 02:28 +1100, Tito Lopez <OBUSTOS01@...>, wrote:
If u use pistar, I believe u have log into BM and edit your profile sec settings there. The same passwd you set there u put..... darn it Steve stole my thunder.  Lol


On Tue, Mar 17, 2020, 8:09 AM Russell, KV4S <russelljthomas@...> wrote:
can mmdvm work when hotspot security is on and if so, how do you configure it?


Re: hotspot security

 

easy enough, thanks!! never used it before :)


On Tue, Mar 17, 2020 at 10:27 AM Steve N4IRS <szingman@...> wrote:
Turn on hotspot security in SelfCare
Set HotSpot Security in Selfcare
Match password in MB.ini


On 3/17/2020 11:08 AM, Russell, KV4S wrote:
can mmdvm work when hotspot security is on and if so, how do you configure it?


Re: hotspot security

Tito Lopez - YN1OB
 

If u use pistar, I believe u have log into BM and edit your profile sec settings there. The same passwd you set there u put..... darn it Steve stole my thunder.  Lol


On Tue, Mar 17, 2020, 8:09 AM Russell, KV4S <russelljthomas@...> wrote:
can mmdvm work when hotspot security is on and if so, how do you configure it?


Re: hotspot security

Steve N4IRS
 

Turn on hotspot security in SelfCare
Set HotSpot Security in Selfcare
Match password in MB.ini


On 3/17/2020 11:08 AM, Russell, KV4S wrote:
can mmdvm work when hotspot security is on and if so, how do you configure it?


hotspot security

 

can mmdvm work when hotspot security is on and if so, how do you configure it?


D-Star vocoder emulator

Steve, KB9MWR
 

There is a need for a D-Star vocoder emulator by the ham community for those who host cloud based bridges for digital voice modes.

If your a ham with this talent or know of one, the community would appreciate your efforts,

It should work similarly to the md380-emu tool by Travis (KK4VCZ) that folks have been using for DMR and the other modes.
https://github.com/travisgoodspeed/md380tools/wiki/MD380-Emulator#ambe-decoding


Connect HBLink to mumble

Kim-Benjamin Lütkemeier
 

Hello guys,
now I play with my thumbDV and connect with BlueDV du my Test HBlink Server, it works very well.

Now my Idea is connect Mumble with help from the ThumbDV to HBlink.
I try it with virtual Audio cable in Mumble. when BlueDV is running and some voice receive from hblink then mumble send (Voice active) but BlueDV has not the function voice activation, maybe someone has another idea best solution was with simulate "pressKey"

73,
Do1KBL, Kim


DVSwitch with MMDVM Dashboard

Tom Corcoran
 

All,

Anyone had any experience installing the MMDVM Dashboard? I've used it with my Pi-Star installs but can't seem to get LH listing when used with DVSwitch. I am able to display current transmitting station info but no LH list.
--
Tom VE3NY


EchoLink to XLX

Robert Moldenhauer
 

Hi,

I want to bridge an EchoLink conference to an XLX reflector. Could someone give me some help? 

Robert

VK2DY

3121 - 3140 of 9083